I just sold my i9003 to my friend. When he inserts his airtel sim or any other sim and give a network search and click on airtel (or corresponding network) he gets the error message 'Can't connect to this network right now. Try again later' several times in two days we have tried and still get the same error.
Ref: My original sim in the phone :Airtel
My rom : cm 10.1 alpha 9 (Dhiru)
I have tried reinstaling the Rom to no avail. Please note that this problem is only recent. I have been using this rom (cm10.1 a9) ever since its release with no issues, the issue occured only when I changed to a different sim. However, it still works on my sim.
Configure apn in network setings
tried it
acuicultor said:
Configure apn in network setings
Click to expand...
Click to collapse
tried to reconfigure APN to no avail
Hello guys.
I have a xperia Z3 from VIVO and flashed a rom from OI, everything went well on flashing the rom but after it finished i noticed that i lost my 4G. When i search for network there have a TIM BRASIL LTE but it won't let me register on it.
Do anyone know how to solve that?
Thanks!
Input the correct apn settings from your carrier
LitoNi said:
Input the correct apn settings from your carrier
Click to expand...
Click to collapse
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Info
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
just test firmware of another region
(UK firmware for example)
:good:
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Geeks Empire said:
just test firmware of another region
(UK firmware for example)
:good:
Click to expand...
Click to collapse
Geeks, there have no other region for my version of the Z3, also i am trying to flash many other rooms from my region and all of them results in a error during the flash... Blank error, no description.
LitoNi said:
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Click to expand...
Click to collapse
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
DiegoManBR said:
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
Click to expand...
Click to collapse
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
LitoNi said:
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
Click to expand...
Click to collapse
Lito, now i will complicate a little bit more then. First, the model number of my mobile is D6646 from Brazil with DTV.
Also, i tried to flash the Vivo Baseband and it was worse, i did not install any baseband from USA, just from Portugal.
I tried that on the keyboard, but when i chose USA band i just can't even register on any TIM network.
Also, i tried to flash the original rom, but i can't flash any other firmware apart from Oi. I get a blank error line on flashtool for every other rom i tried to install, so it's even worse
Feel the challenge.
Thanks again for all your help.
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
LitoNi said:
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
Click to expand...
Click to collapse
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
DiegoManBR said:
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
Click to expand...
Click to collapse
that is extremely weird, never had such issues with any of my android phones. make sure data roaming is not on, the carrier shouldnt be able to charge you if you disabled data
Also, make sure the FTF files youve made with xperifirm and flashtool are correct, like not including the TA files etc..., i would advise you redownload those FTF files and try again, also make sure you have the latest flashtool available.
at this point, you are probably better seeking for a developer or someone who can read codes, make a logcat and see if the flashtool thread is available and ask there. Aside from the FTF files, you are better off asking the carrier why they are still able to charge you in such way. Sorry man, this is as far I can aid you in this matter. GL bud!
Hi guys, since I updates to 5.1.9 my mobile network stopped working, only works with WiFi.
I can send normal text message fine, but WhatsApp,Facebook and any kind of app that requires network stops working.
Only bootloader was enable at phone before update
Any tips?
Did u try to reflash again, and what was ur process, did u use twrp, r u rooted, we need more info
I have t-mobile and I got network connection fine. Did you check your apn?
Check your apn settings under sim and network settings - sim - access point names