COPYRIGHT NOTICE
ADB is a part of Android Open Source Project, found https://source.android.com/
Redistribution of this package is not allowed. Please link people to this thread.
Powered by SuperSU
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING UNOFFICIAL FIRMWARE
How to root Doogee F5 (METHOD ONE):
1. Download the attached zip file and extract it anywhere in an empty folder.
2. Download SPFlashTool (version v5.1516.00 reported as working) and flash the ins_boot.img file located in boot_images folder using the scatter file also found in that folder. Make sure to only tick Boot Image while flashing.
3. Run RootNow.bat and follow the instructions
4. Reflash the stock image also found in the boot_images folder
5. Profit?
How to root any 64bit ARM architecture Mediatek device (this one included) (METHOD TWO):
1. Dial *#*#3646633#*#*
2. Go to tab Log and Debugging
3. Select User2Root
4. Select Root
5. Run RootNow.bat and follow the instructions (except do not flash any of the images)
6. Do steps 1 to 3 again, then select User.
In the future I'm going to update this script to work with every Mediatek device out there.
If asking for support, please supply the adb_log.txt file.
Please report any bugs/issues here.
I'm still waiting for mine to arrive. However one question. When I root it and it downloads an update from DOOGEE will the root stay or will I have to root it again? I had a tablet that every time it updated I had to root it again.
It's funny I've already received a case and a tempered glass screen overlay but still haven't received my phone.
Anybody tried this?
Krystyna said:
Anybody tried this?
Click to expand...
Click to collapse
Yes it works 100%...just follow the instructions given...
And dont forget to thank MushroomLT for his hard work too ..
Thanks man, worked great, just a heads up, do not run the .bat as admin as it won't work, just double click.
MushroomLT said:
Please report any bugs/issues here.
Click to expand...
Click to collapse
I finally succeeded, after several hours.
My problem came from the SPFlashTool that didn't recognized my device.
I've installed SPFlashTool v5.1516.00 (instead of v5.1352.01) and it worked like a charm. :good:
Thank you very much to MushroomLT and to Lazyassgram.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jonnyspandex said:
Click to expand...
Click to collapse
Seems like the flash tool can't access the files. Maybe try running as an administrator?
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Tried that and same result ?
jonnyspandex said:
Tried that and same result ?
Click to expand...
Click to collapse
Could you post the error with the error window moved out of the way of the main one? And have you tried redownloading the zip archive? The scatter file could be corrupt.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Sorry I thought I'd replied to this. I hadn't renamed the boot images, I just thought the software sorted all that, so the odd file name didn't strike me as odd!
---------- Post added at 03:26 PM ---------- Previous post was at 03:25 PM ----------
Phone is now rooted!
hello everybody, (for information my config: Pc with Xp SP3 and phone, doogee f5 with android 5.1)
I have a pb preventing me from accessing to the "boot_images folder" through the "SPFlashTool's scatter loading file browser".
I have to precise that whatever PC I try to connect my phone to, the connexion as "usb storage" doesnt work, on the contrary to a connexion as a multimedia device. I suppose, if I could succeed in connecting as a "usb storage" i could manage to accession to the ins_boot.img.
Could you please help me resolving this pb? Thanx
Sympathy4Kenpachi said:
hello everybody, (for information my config: Pc with Xp SP3 and phone, doogee f5 with android 5.1)
I have a pb preventing me from accessing to the "boot_images folder" through the "SPFlashTool's scatter loading file browser".
I have to precise that whatever PC I try to connect my phone to, the connexion as "usb storage" doesnt work, on the contrary to a connexion as a multimedia device. I suppose, if I could succeed in connecting as a "usb storage" i could manage to accession to the ins_boot.img.
Could you please help me resolving this pb? Thanx
Click to expand...
Click to collapse
Hi, in order to flash an image, you need to turn off your device, press download on your PC and then connect your device to the pc, download should start, but first make sure that you've installed the necessary drivers. And update your windows, as xp is unsupported and VERY unsafe to use.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
MushroomLT said:
Hi, in order to flash an image, you need to turn off your device, press download on your PC and then connect your device to the pc, download should start, but first make sure that you've installed the necessary drivers. And update your windows, as xp is unsupported and VERY unsafe to use.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Click to expand...
Click to collapse
Thanx a lot for your quick reply MushroomLT.
Now I see. i'm gonna follow your advice right ahead and will let you know.
MAGICMAN516 said:
I'm still waiting for mine to arrive. However one question. When I root it and it downloads an update from DOOGEE will the root stay or will I have to root it again? I had a tablet that every time it updated I had to root it again.
It's funny I've already received a case and a tempered glass screen overlay but still haven't received my phone.
Click to expand...
Click to collapse
Hi, I'm not sure, it really depends on the update. Where have you ordered the tempered glass from? I would really like one but can't seem to find it.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
MushroomLT said:
Hi, I'm not sure, it really depends on the update. Where have you ordered the tempered glass from? I would really like one but can't seem to find it.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Click to expand...
Click to collapse
Aliexpress.com or gearbest.com can't post url yet to give you exact info. On Gearbest or Aliexpress.com just search for doogee f5 glass
MushroomLT said:
Hi, I'm not sure, it really depends on the update. Where have you ordered the tempered glass from? I would really like one but can't seem to find it.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Click to expand...
Click to collapse
Sorry MushroomLT,
Dont you have a link for the drivers (i tried the universal one of krush but didnt change anything). Concerning the way of flashing i tried what you told but it didnt work so i suppose i havent the required driver for my xp system to recognise my doogee f5 as a usb storage.
MushroomLT said:
Hi, I'm not sure, it really depends on the update. Where have you ordered the tempered glass from? I would really like one but can't seem to find it.
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Click to expand...
Click to collapse
I ordered this...
http://www.gearbest.com/cell-phones/pp_263262.html
---------- Post added at 01:46 AM ---------- Previous post was at 01:45 AM ----------
Sympathy4Kenpachi said:
Sorry MushroomLT,
Dont you have a link for the drivers (i tried the universal one of krush but didnt change anything). Concerning the way of flashing i tried what you told but it didnt work so i suppose i havent the required driver for my xp system to recognise my doogee f5 as a usb storage.
Click to expand...
Click to collapse
Unfortunately, I think XP might be to old for the drivers.
Sympathy4Kenpachi said:
Sorry MushroomLT,
Dont you have a link for the drivers (i tried the universal one of krush but didnt change anything). Concerning the way of flashing i tried what you told but it didnt work so i suppose i havent the required driver for my xp system to recognise my doogee f5 as a usb storage.
Click to expand...
Click to collapse
Drivers available in phone storage, working with XP
today I've receive my new Doogee F5 but I do all steps but not obtain root, why?, so I would like that someone indicate all steps it it was possible with images, thanks and best regards.
Related
I needed to connect a ZTE Warp to CDMA Workshop and QPST on my pc, so I did some searching to find out how to put the phone into Diag Mode. Easy enough. Well, It took me longer than a few minutes with google to find the info I was looking for, but I did eventually find it. Hopefully this post will help others. I can confirm this works to get the Boost Mobile ZTE N860 (Warp) into diagnostic mode so it can be read by CDMAWS, qxdm, etc.
1. Install the ZTE handset usb drivers: https://www.dropbox.com/s/thf4ctjee960mnt/ZTE_Android_Driver.zip
2. Turn on the phone and connect to pc via usb (make sure you enable usb debugging in settings>applications>development)
3. On the phone go to Dialer and enter *983*87274#
4. A new window will open on the screen with a list of choices. Choose the first item on the list only.
5. Wait a minute or two while the necessary drivers are installed on your computer.
6. Now look in device manager, under ports you should see ZTE Handset Diagnostic Interface (com#).
7. On the phone press home to return to your home screen.
8. Make note of the com port # and you're all set.
You can now connect to qpst, qxdm, and so on. Don't forget to hit the Thanks button below if you found this useful.
Just want"d to say thanks....cause I needed that code...:good:
6thgear76 said:
Just want"d to say thanks....cause I needed that code...:good:
Click to expand...
Click to collapse
Cool. I'm glad it helped you! :good:
Works wonderful on ZTE Avail Z990 as well
You can now connect to qpst, qxdm, and so on. Don't forget to hit the Thanks button below if you found this useful.[/QUOTE]
The above steps work for ZTE Avail z990 (ATT) as well. Works like a charm, ready to connect to QPST/QXDM in a breeze. Thanks.
I can't get qpst to recognize the warp n870. I have all the drivers. Cdma workshop is working just fine but I need to be able to use qpst.
I read somewhere that u have to put the port which is com11 in before it will recognize the phone in device programming. But I dont think im inputting the port in right cuz it wont accept it. Does anyone have some imput?
Sent from my SPH-D710 using Tapatalk 2
Found my Own answer. For those stuck in the future here's the link to a guide on setting up qpst to see your phone. It's how to add you're Ports I was stuck on
http://forum.xda-developers.com/showthread.php?t=1180211
Sent from my SPH-D710 using Tapatalk 2
SelfElevated2 said:
Found my Own answer. For those stuck in the future here's the link to a guide on setting up qpst to see your phone. It's how to add you're Ports I was stuck on
http://forum.xda-developers.com/showthread.php?t=1180211
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Cool, glad you figured it out. I didn't post any info on configuring qpst because it would've been off topic. I'm sure there are people that will appreciate the link you provided. Thanks.
Does anyone have a copy of the USB Drivers, since ZTE took them down?
gadgetdaddy said:
Does anyone have a copy of the USB Drivers, since ZTE took them down?
Click to expand...
Click to collapse
Did you find the drivers? Updated OP with new link.
Good！:good:
budgreen24 said:
Did you find the drivers? Updated OP with new link.
Click to expand...
Click to collapse
It says no files at the new link?
gadgetdaddy said:
It says no files at the new link?
Click to expand...
Click to collapse
Fixed. Try it now.
Bad zip file. Can someone update this download link with a good file please?
Thank you,
John
pede69 said:
Bad zip file. Can someone update this download link with a good file please?
Thank you,
John
Click to expand...
Click to collapse
I just downloaded it to check, and it worked fine for me.
budgreen24 said:
I just downloaded it to check, and it worked fine for me.
Click to expand...
Click to collapse
Worked that time.
However... are you someone that can help me?
Followed your instructions until step 5.
I was a bit confused about which button to push. You said "first item"
So I pushed the FIRST item. The "all functions" button.
Windows came up with it's 3 choice dialog window.
Windows found new hardware.
Locate and install driver software.
Ask me again later.
Do not show this message again for this device.
So then I tried the second one (mass storage+adb) thinking that
maybe since it did a specific thing, you may have meant that one
as the "first item".
Windows did nothing at that point.
No port listing in Device Manager.
Now I'm lost and stuck.
Can you offer any help here?
Thank you,
John
---------- Post added at 01:39 AM ---------- Previous post was at 12:41 AM ----------
When I plug in the phone now and have Windows search for the driver, I get the following...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks...
J
---------- Post added at 02:24 AM ---------- Previous post was at 01:39 AM ----------
OS is Vista 64 Home Pre.
Ok, first item on the list = "All functions".
Then if you see:
pede69 said:
Windows found new hardware.
Locate and install driver software.
Ask me again later.
Do not show this message again for this device.
Click to expand...
Click to collapse
Choose "locate and install driver software". Windows should then install the drivers for you within a minute or so.
If you run into the same message as you did before:
Then I can only guess that it's a compatibility problem with Vista? But like I said, it's a guess. Never tried on Vista, but maybe someone else has? I've had no driver problems using Windows 7 or 8.
Hi...
Thank you for your reply.
Tried clicking on "Locate and install driver software"
Does the exact same thing on my Win 7 64 laptop.
Been going at this since 9am. Very frustrated. About to give up for tonight.
Thanks again,
John
Hi Guys...
Really could use some help here. Have same problem except
Device Manager shows some entries with the yellow triangle
sign. below is a pic of it.
Does the same thing with Win 7 64. Think this could be a 32
vs. 64bit issue? I have several computers but no 32bit OS.
Thanks very much to anyone willing to help me out with this.
J
Today I ran thru this whole procedure on a friend's laptop (windows 8 64-bit) and I didn't have any of the issues you've explained. Windows automatically installed the necessary drivers. The new ports should show up in device manager like this screenshot.
Maybe someone else can help you out..?
Thanks for the reply.
Does not show up in mine because the driver/drivers never install. I get the wrong platform error message.
I have decided to put the ZTE issue aside for now and try and do my wifes phone. And of course I'm having issues...
In DFS on the Mobile ID tab, DFS does not pull the aaa and ha data. And also I get the following errors:
get ds_mip_ss_user_prof cps_error bad_param
get ds_mip_dmu_mn_auth cps_error bad_param
S2 D-710 connects just fine and DFS accepts my SPC/MLS number and 16 digit password. And states
Unlocked in the console.
Going at this three days now. Worn out and pretty much sleep deprived. Sure wish I could get some TeamViewer
help from someone here
Have been laid off so funds are a bit short right now but would be more than happy to give a unlimited webhosting
account complete with Softaculous. Google it if you do not know what it is You would need to get your own
domain name though.
Anyway... thanks again for your reply.
John
First of all, all props goes to the OP of this thread. This is merely a step-by-step detailed guide on the process since there were a lot of members complaining that the steps were unclear.
- Download the following and extract all the files:
MT6577 USB VCOM drivers (link: http://www.mediafire.com/?2sf30pboet4qvov)
SP Flash Tool v3.1224.01.rar (link: http://www.mediafire.com/?h68v8yhhtci8h0e)
CWM-ROOT-B92M.zip (link: http://www.mediafire.com/?8o2yx9ssz1abwon)
2.5gb-data-perm-root.zip (link: http://www.mediafire.com/?4wg5f6rgat8qdrt)
- Install the MT6577 USB VCOM drivers drivers
- Inside the 2.5gb-data-perm-root folder make sure the files have the following names (CASE SENSITIVE!):
recovery.img
EBR1.img
boot.img
logo.img
MBR.img
preloader.img
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Turn off your phone and unplugg the USB cable
- Start SP Flash Tool
- Under options in the menubar check "USB mode"
- Under File in the menubar click on "Open scatter-loading file" and select MT6577_Android_scatter_emmc.txt from the CWM-ROOT-B92M folder
- Double click the following rows inside SP Flash Tool:
PRELOADER and select preloader.img (from 2.5gb-data-perm-root folder)
MBR and select MBR.img (from 2.5gb-data-perm-root folder)
EBR1 and select EBR1.img (from 2.5gb-data-perm-root folder)
BOOTIMG and selet boot.img (from 2.5gb-data-perm-root folder)
RECOVERY and select recovery.img (from 2.5gb-data-perm-root folder)
LOGO and select logo.img (from 2.5gb-data-perm-root folder)
You should have the following then:
- Click on "Download" inside SP Flash Tool
- Take out the battery of the phone
- Put the battery in
- Connect USB cable with your computer
- The bar at the bottom of SP Flash tool should go to 100% a few time and present you with a green circle when done
- Done flashing, hit volume up + power to start up CWM and make a backup
I hope this detailed guide helps everyone out
~Whookid
Disclaimer: Messing around with your phone can be fun but can also cause damage to your phone. I am in no way responsible for anything that you do. I am merely sharing what I managed to do.
Red triangle
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
What ROM can you use with this ?
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
first thanks for the guide!!!
but u should add this to make root working
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Whookid said:
I did not have to do that. I simply added a Google account, started the Google Play Store and it told me there was an update for "superuser".
Did the update, rebooted and done!
Sent from my B92 using Tapatalk 2
Click to expand...
Click to collapse
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
bonecrusher2010 said:
Hi, i cant get to the recovery mode...
I press Power und volume up but there is just the Android with a red triangle.
Can you help?
Click to expand...
Click to collapse
Did the flashing went ok (Green circle at the end?)
********er said:
What ROM can you use with this ?
Click to expand...
Click to collapse
Any ROM that you can find that is compatible with the Star B92M.
steelburn said:
Some of the files are named a little bit differently, but overall pretty much straightforward steps thanks to the guide above.
Click to expand...
Click to collapse
Yeah, to avoid confusion I made everyone rename the files according to the first post.
android_xcuj28 said:
maybe it was not there cause i did not the wipe data/factory... xD
but now when i do it its there
Click to expand...
Click to collapse
Ok good to know, thanks for the input
Broken touch screen Star B92m
i broke the touch screen of B92m
Where can i find new one and how can i change it?
andys312 said:
i broke the touch screen of B92m
Where can i find new one and how can i change it?
Click to expand...
Click to collapse
Your best option is to contact the seller and ask him for more information about this.
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Make sure you have an external sd-card inserted in the phone. It should automatically be mounted to /sdcard/ where you should have enough space to store your camera photos.
Sent from my B92 using Tapatalk 2
What charger are you using and how fast/slw will it charge a empty battery?
Mine takes for ever (8hrs from 0%), the charger fastcardnet send me, but also a standard usb charger i got.
I'm just using the default micro USB chargers I have laying around. I never charge via a computer (USB) though.
Sent from my B92 using Tapatalk 2
@Whookid
Yes worked!
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
bvb09kingz said:
Hi,
I have followed this guide but I didn't get root access.
I also wiped data and did the factory reset but there is no superuser...
What do I have to do now?
And I have another question: What do I need to do to go to the Internet by connecting to my Laptop (in it's function as a Wifi-hotspot) and using his wired-internet-connection? I only got it by Ad-Hoc but it seems that this doesn't work anyway...
Thx,
bvb09kingz
Click to expand...
Click to collapse
Try flashing again and Superuser should be working. Once flashed I suggest you start the play store and you'll see that there is an update available.
About the Wi-fi: that's something computer related so don't know for sure about that one. I just Googled and came across this website:
http://www.connectify.me
Sent from my B92 using Tapatalk 2
steelburn said:
After flashing with 2.5GB ROM, I have issue with my camera: it detects 80MB partition as the SDcard partition.
Anyone know how to change this? Or.. which file should I look for to change the camera save location?
Click to expand...
Click to collapse
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Amjadov said:
I have the same problem, how did you fix it?
I had a 2.5 GB space on my Internal SD Card before I do this root, now it is 83 MB, I could try a factory reset but I still need the rooting so I will run into this problem again.
Click to expand...
Click to collapse
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
android_xcuj28 said:
read this... i also got the same problem
http://forum.xda-developers.com/showpost.php?p=33990331&postcount=75
Click to expand...
Click to collapse
When I first did the root I did not the su.zip step so I booted my phone and it informed me that my internal SD card is damaged amd asked me if I wanted to format it, I clicked yes and then it became 83 MB, I did the root again and flashed su.zip too, I also tried to format the internal SD card but it is still 83 MB.
I think I need to reformat with specifying the new size, how can I do that?
Hi people and sorry for coming in your wonderful community with a question.
I was trying to root my Prestigio PMP3270B ICS 4.0.3 android device and now I can not get it to function.
The screen I see in the recovery mode is a broken android image without any options. Picture below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In normal mode I get the Touch Screen Calibration, but the touch function does not work....Picture below:
Any ideas as to how I can fix this ???
Thank you
Hi again...
I added some images. You will need to copy paste the links in my above post because I am not allowed to show them here.
Any ideas?
Thank you.
did you try the reset pinhole?
Sent from my GT-S5360 using xda app-developers app
yousef8824 said:
did you try the reset pinhole?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yes, I tried the reset pinhole without results.
If i let the device to boot (second picture link above) and connect usb cable with pc, there are 2 drives that open up in explorer. I can neither access them nor format them.....
I think its time to go for a more expensive tablet like google nexus 7 that will not let me down like this....
the arnova 7h g3 has the same problem go to arctablet fourm sign up and see you there because some one installed cwm recovery and worked
Sent from my GT-S5360 using xda app-developers app
Thanks man but cwm recovery does not work either...
Now my device won't boot at all.... Only the green LED is on when I turn it on.....
Any ideas as to how I install a custom ROM using the SD Card without USB connection?
Because I can not get it to any screen beyond blank.......
Any ideas people?
yousef8824 said:
the arnova 7h g3 has the same problem go to arctablet fourm sign up and see you there because some one installed cwm recovery and worked
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeahh man you got a point here....
Arnova 7h G3 specs are similar to the Prestigio PMP3270B. Logically any ROM will work on both tablets.
http://www.arctablet.com/blog/forum/arnova-7h-g3/backup-original-rom/
Sent from my GT-S5360 using xda app-developers app
I am trying to "burn" that image to SD card so I can use it on my device without the use of USB....
I have tried the "Phoenix Card Tool" but I got error. I couldn't "burn" the image....
Now I am trying a tool called "Win32 Disk Imager"
I will let you know if it works..... I am up to the limit to give up....
I am going to take the device back to the shop pretending that "Oooops.... Suddenly it does not work... Strange"""
Thanks
Athanasis.
UPDATE:
I tried the tool "Win32 Disk Imager" but it does not restart to the SD card when I insert it in tablet and reset. No green rectangle.
Athanasis said:
I am trying to "burn" that image to SD card so I can use it on my device without the use of USB....
I have tried the "Phoenix Card Tool" but I got error. I couldn't "burn" the image....
Now I am trying a tool called "Win32 Disk Imager"
I will let you know if it works..... I am up to the limit to give up....
I am going to take the device back to the shop pretending that "Oooops.... Suddenly it does not work... Strange"""
Thanks
Athanasis.
UPDATE:
I tried the tool "Win32 Disk Imager" but it does not restart to the SD card when I insert it in tablet and reset. No green rectangle.
Click to expand...
Click to collapse
Try with this: http://yf2.value4it.com/Service_Files/TabletPC/PMP3270B/PMP3270B_V1.0.7_20121210.zip
WOWWW... Looks like the real thing !!!
Lets see if you are my Saint Claus.
I am "burning" it on the SD..... In a couple of minutes I will flash the device and let you know......
---------
For any outcome, thank you anyway.....:highfive:
I don't know who you are really, but I want to thank you man..... That file brought my device back to life !!!!
It was the best present I had for this Christmas......Just a minute after midnight !!!!!
Now I will not go to buy another tablet.......... THANK YOU SO MUCH FOR SAVING MY PRECIOUS CASH AND TIME !!!!!!
THANK YOU......................THANK YOU..............................THANK YOU........................................
Athanasis said:
I don't know who you are really, but I want to thank you man..... That file brought my device back to life !!!!
It was the best present I had for this Christmas......Just a minute after midnight !!!!!
Now I will not go to buy another tablet.......... THANK YOU SO MUCH FOR SAVING MY PRECIOUS CASH AND TIME !!!!!!
THANK YOU......................THANK YOU..............................THANK YOU........................................
Click to expand...
Click to collapse
Glad to hear I helped. btw. another surprise... your device IS rooted. Out of the box. Isn't Xmas time magic? Have a good one. :fingers-crossed:
I love christmas.... I have a rooted device... Wooowwww. This is what I was trying to do before the mess..... Now you came here with your magic link to make my life easier... Wooowww....
Come for a beer friend ....... :laugh:
YOU WANT TO SEE MORE ???????
Actually the link you posted was not a rooted ROM but I have managed to unlock it using the following tool and procedure:
Yes guys. I managed to do it. And yes the application that may root this tablet is called "Android ICS Root Unlocker 1.0" Developed by GreekDev -11th July 2012
This is a Zipped file that you will need to unzip.
View attachment 1591923
Make sure that USB is enabled on your tablet and also USB for debugging option is ticked to ON.
Run CMD as an administrator and then write ICS_Root_Unlocker.bat
It is important that you run it from CMD.
At each tablet reboot wait before pressing a key to continue.
Before pressing key to continue enable USB again on your tablet each time it reboots.
If you have problems contact me by quick PM.....
Athanasis said:
Actually the link you posted was not a rooted ROM but I have managed to unlock it using the following tool and procedure:
Click to expand...
Click to collapse
You have to learn a bit more about Android.
It IS rooted out of the box, script just sat qemu property in local.props to already world writable /data partition and copied su binary and SuperSU apk. It did NOT utilize any exploit to escalate privileges. This is the way how devs prefer their devices set up when developing apps that don't require root but want to keep in control of their devices.
Brother, thanks for the info. I am developing in C sharp in visual studio. Also VBA, PHP, MySQL.
To tell u the truth, this is the 1st tablet I ever had....... so you may forgive me for this initial lack of experience.
Sent from my PMP3270B using Tapatalk 2
marlasr said:
You have to learn a bit more about Android.
It IS rooted out of the box, script just sat qemu property in local.props to already world writable /data partition and copied su binary and SuperSU apk. It did NOT utilize any exploit to escalate privileges. This is the way how devs prefer their devices set up when developing apps that don't require root but want to keep in control of their devices.
Click to expand...
Click to collapse
May I ask if the patch I linked above, would root my device if it were with factory firmware.
Sent from my PMP3270B using Tapatalk 2
Athanasis said:
May I ask if the patch I linked above, would root my device if it were with factory firmware.
Click to expand...
Click to collapse
Yes, script would work. You have factory firmware right now, too. Link I've posted is factory firmware.
As for the Android programming you'll need C for DDK and Java for SDK.
Keep in mind embedded programming is quite different from desktop/web programming.
marlasr said:
Yes, script would work. You have factory firmware right now, too. Link I've posted is factory firmware.
As for the Android programming you'll need C for DDK and Java for SDK.
Keep in mind embedded programming is quite different from desktop/web programming.
Click to expand...
Click to collapse
Thank you so much....
Yes I know embedded programming is much more difficult. If I ever decide, I would probably go for the Java platform but not for complicated programs. Free time is quite limited here !!!
Athanasis
:good:
Unlocking, rooting, relocking and unrooting simplified! (and much more!)
VERSION 2.1.4 - This program will automatically bring together all the files you need to unlock and root your device in a few clicks, or flash it back to stock and re-lock it. You can also use this program to backup/restore all your important data, flash zips, set file permissions, push and pull files, install apps, generate logcats/bugreports, and much more! With the included file association options, you can perform tasks like flashing zips, installing apps, restoring android backup files, and flashing/booting img files with just a double click! The program includes a full featured interface for automating tasks in TWRP, enhanced restore features, an in-built auto-updater/notification system, ‘any build’ mode, advanced restore features,’NRT- Live Log’ for viewing the adb/fastboot cmds that are run in the background, quick tools utilities, and tools for taking screenshots/screen-recordings. All the latest official Android builds and Nexus devices are supported. The program intelligently and selectively downloads the files it needs for your device and makes sure you are using the latest files available. The program can even auto-detect your device and build. This release brings full Marshmallow root support plus all automated features by utilizing a new system that no longer requires modified boot.imgs. Check out the updated changelog for a more comprehensive breakdown of the feature set and changes in this release.
~ my goal for this project is make the entire process as smooth and simple as possible ~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please read the FAQs before posting questions: http://www.wugfresh.com/nrt/faqs/
Looking for a walk-through? >> Excellent Instructional/How-To Videos: http://www.wugfresh.com/videos/
More information & Download Links: http://www.wugfresh.com/nrt/
Changelog: http://www.wugfresh.com/nrt/changelog/
Enjoy! ^_^
{{ WugFresh }}
I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.
ashik992 said:
I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.
Click to expand...
Click to collapse
Maybe try clearing browser cache. Here are some external mirrors:
Mediafire: [redacted]
Dev-host: [redacted]
Enjoy! ^_^
{{ WugFresh }}
Thx Wug! I was wondering if you were going to update the toolkit to work with flo, and BAM! Here it is! Love your work, hope you keep at it. :good:
I did not chose twrp
I use 1.66 to root my nexus 7 (2012) and I did not check the (also flash custom recovery) first pass was pushing temporary twrp, and second it flash the twrp.
Why? I get a real problem with twrp with the 4.3 update, so I did not want it in my device.
Is this a bug in the toolkit? or there is a reason why the twrp is push without asking to flash?
Still the best toolkit I ever use.
You may want to change the main body font. It's almost impossible to read on the xda app with the dark theme selected
prshosting.org
Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.
melfunn said:
Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.
Click to expand...
Click to collapse
Same issue I'm having.
Thanks for the app! Unlocking went fine, I'm hesitant to root if it's going to leave me with TWRP even if I leave that field unchecked, anyone else have the same problem as Lachaine? Or has anyone successfully gained root and maintained stock recovery with this?
funkbucket007 said:
Same issue I'm having.
Click to expand...
Click to collapse
Please try enabling this option:
Cheers.
{{ WugFresh }}
Thanks for all your hard work on this, and for sharing it with the community!! It's great having multiple options!!! I didn't use this, but just wanted to say thanks for building this and freely sharing it!!!! It's devs like you that make XDA such a great community to be a part of!!!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
WugFresh said:
Please try enabling this option:
Cheers.
{{ WugFresh }}
Click to expand...
Click to collapse
Check that option and start over with the root process?
I'm having the same problem. Made the changes in setting and no difference.
jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Third time is a charm.:good:
k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
Third time is a charm.:good:
Click to expand...
Click to collapse
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again
Unlocked, rooted and installed TWRP. No problems.
Thanks!
feron said:
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again
Click to expand...
Click to collapse
ODD.. third time it worked... lol
feron said:
ODD.. third time it worked... lol
Click to expand...
Click to collapse
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium
k5mitch said:
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Yes don't forget to restart the toolkit before trying again. Worked for me when I did. Thanks wug!
Having an issue. Stock build# is JWR66N but is not listed, so i choose the closest one, JWR66V. So far it installed the adb drivers but fails on the Full Driver Test and Checking ADB Status. The device shows up perfectly now in DM, as a Nexus7, so the drivers have a clean install. Rebooted 2-3 times already. I can go to the adb command line and its installed but not sure why the app or PC doesn't see it setup right? I cant continue to the next steps if adb is not right...lol
Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
Edit For those didn't work with them use this
https://forum.xda-developers.com/ve...al/rom-offical-nougat-pre-rooted-rom-t3718155
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
Edit :
A Video Proof And How To Do
In Description Of Video I add link to my rom
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English
where is the proofs?
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
You Are Right I will Post ScreenShot
NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
I Added Proof In Attachments Check them
Ok, I have a problem with the adb, I tried many times but it still freezing and my cellphone screen too, I searched in the internet many ways to mount the system partition as read and write but all failed. Im thinking that the problem is the nougat version, I have the J1 and Im downloading the D1. Pst, the drivers and the cables are ok, I used another adb codes and they worked.
Seems like it only works on Qd1, so if have updated QI1 or QJ1, got to flash back to Qd1 to get it to work
...
I flashed DQD1 via Odin and after that, I flashed the .tar, but it still freezing my screen, I tried first without flashing the .tar because after flashing the firmware, the custom logo appeared. But again, the adb process failed, itsn freezed like the other but was unable to copy the su.img
---------- Post added at 07:06 PM ---------- Previous post was at 06:13 PM ----------
I did the same process that you made, so, I don't know why this happen, can you please assist this?? The phone doesn't matter, I just want to prove if this really work. I'll be amazed if this really do.
I´m facing the same problem on my device as @NerdTronik , just frezes when try to remount system as rewritable.. No succes as yet and I'm on Qd1 with the same kernel version.. Dont know How you Got to succesfully Remounted the system..
Another one stuck scratching my head with the phone locking when the batch script gets to the first adb shell mount command. The flash to DQD1 (from here, all 4 files) went fine. Flashed the new boot image without issue, reboot reflects custom image. Enabled debugging, connected with ADB, but that mount would be the final thing that would occur. Hoping this is just something we need clarified in the instructions.
Ok for all of your problem tonight i will make a youtube video learn how to root with the proof of it ☺?
Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?
I did a Google for the the boot image file name and came across this link:
http://www.techzai.com/eng-root-file-samsung-android-7-nougat/
NOTE: I accessed this via Google's cache, and with NoScript plugin in Firefox. The firewall I was accessing through blocked the site for a reason... unsure if that could be that it isn't safe, work just didn't want me going there during business, etc. Go at your own risk.
But one thing that was noted in those instructions was to not only enable USB Debugging, but to also enable OEM Unlock in the developer options.
The thread for the S7 (which I think would apply but we just need to use the later released S6 boot image) mentions disabling secure startup. https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
Might have time to play around with this more during the coming weekend, but maybe @faw_wal or another member will get additional info before then.
Don't work in my phone
So has any one else been able to confirm this as a working method?
DonaldAnderson said:
So has any one else been able to confirm this as a working method?
Click to expand...
Click to collapse
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?
faw_wal said:
Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English
Click to expand...
Click to collapse
Don't you think your omitting a step??, we all follow each step you pointed in the instructions and got the same problem, devices just freezes when execute the root.bat
faw_wal said:
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?
Click to expand...
Click to collapse
I think that it will be nice, I'll be waiting for it in a few hours. We just want to solve the errors, exactly the mounting system partition process.
can you tell me how to do that? when i double click root.bat my homegreen freezy?
can you tell me how to do that? when i double click root.bat my homegreen freezy
motorec said:
Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?
Click to expand...
Click to collapse
I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/att-galaxy-s6/general/root-att-samsung-g920a-s6-g925a-s7edge-t3564637
DDwhite said:
I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/at...ot-att-samsung-g920a-s6-g925a-s7edge-t3564637
Click to expand...
Click to collapse
Oh nice, it's just seems impossible until somebody find the method to write in the system partition, in the thread you posted here, there was a man saying that we need to flash or do something before run root.bat, he didn't checked before but, sounds like a development.
http://rootjunkysdl.com/files/?dir=Gates/DeBloater