Database Info

[Q] E: Can't /mount/cache/ ..... errors in mmx a110

hi fnds. sorry for d long story below. & thanks for reading.
mine is micromax a110 phone. i've flashed four roms in it one after d other. all worked well with little bugs. last but one i've flashed miui v5 & later i've flashed galaxy ultimate v2 rom. this gave me look like galaxy s4. & about phone in my phone settiongs shown me as gt-i9500. it worked nice but when i switch it off & tried to switch on first it shown me miui with complete orange screen & later samsung logo & swaitches on & worked as gt-i9500 nicely.
now d problem is unknowingly i have flashed Skin1980-GT-S5360 CWM by using recovery mode to increase my internal memory. that's it.
from then it is showing
E: Can't mount/cache/recovery/command
E: Can't mount/cache/recovery/log
E: Can't open/cache/recovery/
E: Can't mount/cache/recovery/last_log
E: Can't open/cache/recovery/last_log
from then my phone is not even switching on, instead simply it is strucking on """MIUI VICTORY Redefining Android""" with pink background.
& i'm unable to get into download mode. actually i had never into download mode before. in d previous threads some process is there for my problem but for that my phone has to be in download mode.
the only hope i've now is my cwm is working very nicely & i am able to go into recovery mode.
so pls help me in this issue. from two days my situation is like this.
THANKS A LOT. PLS HELP ME

Go to THIS THREAD and follow the second procedure to get ur phone back to life.
And from next time pls make a backup via clockwork recovery so that u can restore it in case of Any trouble.

thanks a lot brother.
[email protected] said:
Go to THIS THREAD and follow the second procedure to get ur phone back to life.
And from next time pls make a backup via clockwork recovery so that u can restore it in case of Any trouble.
Click to expand...
Click to collapse
hi fnds i have just stucked with the logo only. only able to go to recovery mode. i've followed the above said procedure. first time all gone. even unable to go to recovery mode. no led lighting while charging. so i worried a lot becoz my phone is completely bricked now..... then iI've followed the same procedure second time now i got my phone back. . THANKS A LOT BROTHER FOR THE ABOVE ADVICE...
:good::good::good::good::good::good::good::good::good::good::good::good::good::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::highfive::highfive::highfive::highfive::angel::angel::angel::angel::angel::angel:

usb debugging is not showning in pc
hi brother thanks for the advice. now i've custom rom as a new phone. but the problem is even i've enabled usb debugging in my phone & after connecting it to pc it is not finding my device completely. it is showing put ur device in usb debugging mode.
just i wanted to root my phone for that my phone should be connected to pc to root it by using unroot pro or one click method. or even to flash it by using root with bin4ry....
so pls help me in this issue.
thank u bro

[Completed] sony xperia sp bricked and need help im at a lost end :(

Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris

chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread

chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.

struck at sony logo, cwm workng & stil green light mean detected ?? give solution plz

struck at sony logo, cwm workng & stil green light mean detected ?? give solution plz
i installed custom rom 4-5 month ago , all working fine but before 3 days , rom corrupt n aftr hanging n restart 2 3 times asking for format all,, i format n thn i tryagain to flash same rom ,, but now geting error like cant mount system, cant mount cache , recovery ,, cwm wrkng but installation aborted...
wmshua alway flash failed after 10 % 16.0.b.2.16
sony pc companion detecting but not shwng of update , also try like first slect repair option then connect xperia c but this also not working so cant updating device from sony pc companion also
try also on another pc but failed ...
but still geting green light when pressing vol down key n connecting xperia c to pc ..
is there any hope ??? or any other way ???
plzzz help n sugest something ?? in the end only one way sony center

singhm_ said:
i installed custom rom 4-5 month ago , all working fine but before 3 days , rom corrupt n aftr hanging n restart 2 3 times asking for format all,, i format n thn i tryagain to flash same rom ,, but now geting error like cant mount system, cant mount cache , recovery ,, cwm wrkng but installation aborted...
wmshua alway flash failed after 10 % 16.0.b.2.16
sony pc companion detecting but not shwng of update , also try like first slect repair option then connect xperia c but this also not working so cant updating device from sony pc companion also
try also on another pc but failed ...
but still geting green light when pressing vol down key n connecting xperia c to pc ..
is there any hope ??? or any other way ???
plzzz help n sugest something ?? in the end only one way sony center
Click to expand...
Click to collapse
Try this first :
Open Sony PC Companion, and select the very first option (Support Zone), then the last option (Repair device) and there select Xperia C (do not connect your phone until here), now after selecting Xperia C when PC Companion asks you to connect your device, now connect your device and make sure you are continuously pressing the Volume Down Key (it will come written there and pics will also be there) and then wait till it detects your device. Then PC Companion will repair your device.
If this does not help then try method given on THIS thread.
If nothing helps then you have to go to Service Centre.

Connect your phone to the computer, Reboot into CWM , then in advanced, select mount USB. thats it.
Or just use a card reader and place the rom in ur SD card.

hey @goudaniket @singhm_
My xperia c is also having same problem can u plzzz xplain the solution briefly.
And also provide me link to the latest cwm for xperia c...
Thanks in advance
Sent from my Moto G using Tapatalk

superhaker said:
hey @goudaniket @singhm_
My xperia c is also having same problem can u plzzz xplain the solution briefly.
And also provide me link to the latest cwm for xperia c...
Thanks in advance
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Try Isiddhart's method and tell me if it doesnt work.

goudaniket said:
Try Isiddhart's method and tell me if it doesnt work.
Click to expand...
Click to collapse
Hey goudaniket
I had tried to update through Sony pc companion but as the update begins, after 10 sec it shows error message......
And whenever i use wmshua it jst stops at 10% on flashing firmware for xperi c.......
Plzzzz help me bro
Sent from my Moto G using Tapatalk

superhaker said:
Hey goudaniket
I had tried to update through Sony pc companion but as the update begins, after 10 sec it shows error message......
And whenever i use wmshua it jst stops at 10% on flashing firmware for xperi c.......
Plzzzz help me bro
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Do one thing download the correct ftf of your phone and flash it from flashtool

has anyone solve the problem? im stuck at it doing all the possible ways to recover my device.

micoloco said:
has anyone solve the problem? im stuck at it doing all the possible ways to recover my device.
Click to expand...
Click to collapse
Phone model?

Xperia c 2305 I was able to boot in cwm and tried to flash stock rom again it shows error

Help me please , phone corrupted after 5 months from installing custom ROM LOLIPOP

Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me

[email protected] said:
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
Click to expand...
Click to collapse
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk

abhishekr700 said:
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.

[email protected] said:
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
Click to expand...
Click to collapse
First of all to say thanks,you can press the thanks button on his/her post,it helps keeping xda clean and on track.
Now as for your problem what I think is that your system partition memory has corrupted,
Recovery is stored on separate partition so you are still able to access it.
Elsewhere your motherboard and all is intact cause you can run the rom installer and execute commands to.
I strongly recommend getting your phone to a service centre for help,
Noone here(I guess) can help you deal with hardware issues.
One more thing, have you tried restoring your system via wmshua flash tool,
You can find its tutorial easily in the forum. Try it before spending money
Press the thanks button if I helped you.
Sent from my C2305 using Tapatalk

QH SUSB_Dload /Hardbrick Xperia Tx Recovery

Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
 @Antiga Prime & @Adrian DC any view .

srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.

@Antiga Prime
Reached to a level where S1 tool works but shows Unknown SIN version . snapshot attached and again stuck ,
thanks added for your quick response and related link .
what else can be done
Antiga Prime said:
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
Click to expand...
Click to collapse

srd34 said:
@Antiga Prime
tried using the steps shown except for opening the phone part for test point and got error attached .
Thanks for the link though . any other view ?
Click to expand...
Click to collapse
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.

@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Antiga Prime said:
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
Click to expand...
Click to collapse

srd34 said:
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Click to expand...
Click to collapse
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.

Thanks , but it seems this SIN file is also not compatible .
Seems the last resort is to reach service center .
Antiga Prime said:
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Click to expand...
Click to collapse

srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Hello. Have you find the decision about QH SUSB on TX?

No solution yet . The device still with me and gets blinked when connected with charger , however . No solution to recover from hard brick I believe . Service centre also of no help since this model was a limited edition one and they dont have in their SKU list to do anything . keeping as fancy paper weight