hi fnds. sorry for d long story below. & thanks for reading.
mine is micromax a110 phone. i've flashed four roms in it one after d other. all worked well with little bugs. last but one i've flashed miui v5 & later i've flashed galaxy ultimate v2 rom. this gave me look like galaxy s4. & about phone in my phone settiongs shown me as gt-i9500. it worked nice but when i switch it off & tried to switch on first it shown me miui with complete orange screen & later samsung logo & swaitches on & worked as gt-i9500 nicely.
now d problem is unknowingly i have flashed Skin1980-GT-S5360 CWM by using recovery mode to increase my internal memory. that's it.
from then it is showing
E: Can't mount/cache/recovery/command
E: Can't mount/cache/recovery/log
E: Can't open/cache/recovery/
E: Can't mount/cache/recovery/last_log
E: Can't open/cache/recovery/last_log
from then my phone is not even switching on, instead simply it is strucking on """MIUI VICTORY Redefining Android""" with pink background.
& i'm unable to get into download mode. actually i had never into download mode before. in d previous threads some process is there for my problem but for that my phone has to be in download mode.
the only hope i've now is my cwm is working very nicely & i am able to go into recovery mode.
so pls help me in this issue. from two days my situation is like this.
THANKS A LOT. PLS HELP ME
Go to THIS THREAD and follow the second procedure to get ur phone back to life.
And from next time pls make a backup via clockwork recovery so that u can restore it in case of Any trouble.
thanks a lot brother.
[email protected] said:
Go to THIS THREAD and follow the second procedure to get ur phone back to life.
And from next time pls make a backup via clockwork recovery so that u can restore it in case of Any trouble.
Click to expand...
Click to collapse
hi fnds i have just stucked with the logo only. only able to go to recovery mode. i've followed the above said procedure. first time all gone. even unable to go to recovery mode. no led lighting while charging. so i worried a lot becoz my phone is completely bricked now..... then iI've followed the same procedure second time now i got my phone back. . THANKS A LOT BROTHER FOR THE ABOVE ADVICE...
:good::good::good::good::good::good::good::good::good::good::good::good::good::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::highfive::highfive::highfive::highfive::angel::angel::angel::angel::angel::angel:
usb debugging is not showning in pc
hi brother thanks for the advice. now i've custom rom as a new phone. but the problem is even i've enabled usb debugging in my phone & after connecting it to pc it is not finding my device completely. it is showing put ur device in usb debugging mode.
just i wanted to root my phone for that my phone should be connected to pc to root it by using unroot pro or one click method. or even to flash it by using root with bin4ry....
so pls help me in this issue.
thank u bro
Related
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I did the same thing like you and had same issue.
Unfortunately, we cant use Flashtool/ SUS/ Perfect Flash to unbrick because there have no driver for our xc.
So, I sent back to SONY yesterday.
Fix your problem using this way
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
iSiddharth said:
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
Click to expand...
Click to collapse
this method doesnt work when you flash a rom for a different device like i did i already order a new motherboard for my xc. this only will solve it...changing motherboard.
And by the way if Red Light is shown then it is Soft Brick and you can very easily repair it. If that light is also not there then you can say that it is a hard brick.
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.
Hello guys.
I have a Xperia C (C2304) (from my mom haha), and I'm with a issue. Every time, I receive the message "com.android.phone stopped", so, I cant receive and make calls, and, I made a lot ot hard reset, and nothing... Every time, I got this message...
Can someone help me?
Thanks a lot !
JoaoMarcos said:
Hello guys.
I have a Xperia C (C2304) (from my mom haha), and I'm with a issue. Every time, I receive the message "com.android.phone stopped", so, I cant receive and make calls, and, I made a lot ot hard reset, and nothing... Every time, I got this message...
Can someone help me?
Thanks a lot !
Click to expand...
Click to collapse
Flash the file attached below using CWM. If it helps then ok or else flash the complete system using THIS guide.
screen not workr after open in recovery
hiii sidhharth
i have rooted my xperia c phone and copy rom and bugfix file , then i install mobileuncle tools , then i copy all 3 files into sd and phone , then i open my devise into recovery mode but it couldnt start.......... its only shows black screen and when i click all d switch so phone is only shows red and green lights
plzzz help me
vishv.92 said:
hiii sidhharth
i have rooted my xperia c phone and copy rom and bugfix file , then i install mobileuncle tools , then i copy all 3 files into sd and phone , then i open my devise into recovery mode but it couldnt start.......... its only shows black screen and when i click all d switch so phone is only shows red and green lights
plzzz help me
Click to expand...
Click to collapse
Repair your device using the guide on the thread linked below
http://forum.xda-developers.com/showpost.php?p=57614511&postcount=13
Hey Guys......
Ive got a bad news...... Nd i need help..... ASAP..
Actually long story short- I Bricked my gt i9003 (Galaxy sL) :'(
Long story- This new rom came out recently called Omnirom 14.1 for the gt-i9003
And so i got pretty excited nd tried to install it....
Previously i was on cm 10.1 nd cwm (cant remember the version)
So after i installed it the usual way, As i thought it didnt work..... It got stuck at the logo...
So when i tried to get into recovery The recovery changed from cwm to twrp(maybe bcoz of the rom i guess)
From this twrp i tried to flash another rom called Nameless rom (the lollipop version one)
Then after i booted the phone, the phone didnt even give me the ROm's logo this time.....
So then i tried to install cwm from twrp so that i can recover from the backup which i made before...
ND guess wut.... Instead the phone now completely does'nt go into NORMAL BOOT MODE, RECOVERY MODE...... but DOWNLOAD MODE is still available.....
Whenever i try to go into recovery or boot mode it shows a PHONE-EXCLAMATION-COMPUTER symbol (I'll post the pics below).....
I searched for the treatment for it Nd found out that it was just soft bricked nd I just needed to flash a custom rom.....When i tried that with the download mode nd ODIN it was'nt successful....
Instead in odin it shows (SUCCESSFUL 0/FAILED 1)...
I tried everything from flashing the KPE and to flashing the custom rom, but i do'nt seem to find any progress...
Nd one more important thing...... When i connect my phone to pc with usb, It normally shows both internal storage nd sd card storages...... But now it shows sd card nd instead of int. storage it shows some folder called Cache...... wtf is that?? did i damage my internal storage??:crying::crying:
Im in DIRE NEED OF HELP so plssss....... plss REPLY if u know ANYTHING abt this situation....
I appreciate aNY kind of help....
I hope that someone will come to rescue me........Nd the one will be my HERO!:angel:
P.S. sorry fr bad english.... (typing while worrying abt mah phone)