Hello everyone! I have an issue with my Zenfone 2 (ZE551ML).
I flashed CyanogenMod 12.1 and everything was working fine. That is, until I decided I wanted to go back to stock ROM. That's when everything went wrong.
1) I went into recovery mode (using Power + Volume UP).
2) I wiped cache partition (probably my first mistake)
3) I restored to factory settings (possibly my second mistake)
4) After this I tried to flash the "recovery1.img" of the stock ROM I had.
5 ) That didn't work so I tried using ADB to flash different ".zip" files (all firmware downloaded from Asus website)
When that didn't work either, I abandoned and rebooted the phone. But it doesn't boot anymore.
It is stuck on the Asus screen and nothing happens.
Does anyone know if and how I can get out of this situation?
I must insist on the fact that I am only a novice. Until now I've only ever known iOS and have no knowledge whatsoever of how Android works.
I really hope someone can help me!
Hello,
Welcome to XDA.
If you can find your stock firmware you can use fastboot to restore the firmware via Asus flash tool.
I don't know the specifics of your device.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/zenfone2/help
If that doesn't help then try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
I hope this helps, good luck.
Remember to register an XDA account so you can post and reply in the forums.
Droidriven said:
Hello,
Welcome to XDA.
If you can find your stock firmware you can use fastboot to restore the firmware via Asus flash tool.
I don't know the specifics of your device.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/zenfone2/help
If that doesn't help then try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
I hope this helps, good luck.
Remember to register an XDA account so you can post and reply in the forums.
Click to expand...
Click to collapse
Hi, thank you for answering.
I downloaded the Flash Tool but it only supports <.RAW> files. I can't find the proper files though, the only ones I can find are for ZF4/5/6... Any ideas on where I could find them ?
I'll post my question on both links you indicated, thank you.
m3j said:
Hi, thank you for answering.
I downloaded the Flash Tool but it only supports <.RAW> files. I can't find the proper files though, the only ones I can find are for ZF4/5/6... Any ideas on where I could find them ?
I'll post my question on both links you indicated, thank you.
Click to expand...
Click to collapse
Try this link, go down to where it says "please select OS", click that and then select "android", then scroll down the list until you find the firmware you are supposed to have.
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
You may want to read the thread linked below as well.
http://forum.xda-developers.com/zenfone2/help/hardbrick-overwrite-fastboot-t3101290
I hope this helps.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Try this link, go down to where it says "please select OS", click that and then select "android", then scroll down the list until you find the firmware you are supposed to have.
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
You may want to read the thread linked below as well.
http://forum.xda-developers.com/zenfone2/help/hardbrick-overwrite-fastboot-t3101290
I hope this helps.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I downloaded the appropriate zip file but flashtool only allows raw format. I found older version of firmware in raw format but couldn't get the flashtool to do anything with it. Waited 15 minutes for something to happen but nothing. Do you know of any way to convert zip format to raw ?
m3j said:
I downloaded the appropriate zip file but flashtool only allows raw format. I found older version of firmware in raw format but couldn't get the flashtool to do anything with it. Waited 15 minutes for something to happen but nothing. Do you know of any way to convert zip format to raw ?
Click to expand...
Click to collapse
No but I can do a search for you.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
No but I can do a search for you.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you. The closest I found was this link: "https://cloudconvert.com/raw-to-zip" But as you can see, it's the wrong way around
m3j said:
Thank you. The closest I found was this link: "https://cloudconvert.com/raw-to-zip" But as you can see, it's the wrong way around
Click to expand...
Click to collapse
Try extracting the .zip, it could be a .RAW file that has been compressed for download, if it is then just unzipping the file should give you the .RAW you need.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Try extracting the .zip, it could be a .RAW file that has been compressed for download, if it is then just unzipping the file should give you the .RAW you need.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Unfortunately the .zip file contains lots of differents files and folders...
By order of appearance :
- META-INF
- recovery
- system
- boot.img
- droidboot.img
- file_contexts.file
- ifwi.zip
- sl_vmm.bin
m3j said:
Unfortunately the .zip file contains lots of differents files and folders...
By order of appearance :
- META-INF
- recovery
- system
- boot.img
- droidboot.img
- file_contexts.file
- ifwi.zip
- sl_vmm.bin
Click to expand...
Click to collapse
I'm sorry, I just don't know enough about your device, please post your question in the Android Q&A thread I linked you to, you will find more help there than I can give you, go there, post your question, be patient and if someone knows what you are looking for they will tell, it will have to be someone that knows your device, it's file types and it's tools to repair it. I have nothing else that I can give you.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
I'm sorry, I just don't know enough about your device, please post your question in the Android Q&A thread I linked you to, you will find more help there than I can give you, go there, post your question, be patient and if someone knows what you are looking for they will tell, it will have to be someone that knows your device, it's file types and it's tools to repair it. I have nothing else that I can give you.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No problem, thank you very much for trying. I will post my question on both links you sent !
Related
The Wikipad has been rooted and there is also a ClockworkMod Recovery available. I take no responsibility for your actions. This a choice you are making. If you brick your device that's on you. That being said, these procedures have been successful so far.
This only works on the Wikipad 7 inch running Android 4.1.1 and using Windows 7 64-bit (32-bit should work as well). I've not tried this with 4.2.2 or Windows 10, nor I have touched my Wikipad in years.
Download this: Everything you Need.zip and follow the read me(s).
A clean recovery backup! (Props to ordoeb) -- http://dfiles.ru/files/079843b8f
Thanks. Worked for me. Got root and clockworkmod. Still can't see my device in adb in Ubuntu. Trying to figure that out.
bad link
Thanks for root.
But link doesn't work.
Please, update the link "Everything you Need.zip".
Thanks again.
The Wikipad needs its own forum.
Sent from my R800x using xda app-developers app
Finally
Mad props to ordoeb! Thank you and thank you again.
I'm downloading his stock image. I'll install it, make sure it's clean, then upload a copy with a link to share. As promised, I will also release instructions and files for root.
ordoeb, you've done the Wikipad community a great service. We now have full control over a device we love.
We now:
-Have a way to backup the device
-Restore the device (even in some "bricked" situations")
-Create Custom Roms
-And root the device
:good:
little help
maddawg579 said:
Thanks. Worked for me. Got root and clockworkmod. Still can't see my device in adb in Ubuntu. Trying to figure that out.
Click to expand...
Click to collapse
How did you do it? I did everything correctly and I'm stuck in "waiting for device"
[SOLVED] I placed the original fastboot in the motochopper folder which probably didn't do anything. But since my android drivers are everywhere! I removed the adb_usb that was provided in the everything you need rar and used Google's USB drivers. Worked like a charm!
SmokeyTheAggie said:
The Wikipad needs its own forum.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
I couldn't agree more.
Link not working
The download link only has a file with pictures in it. File says sf baltimore...can someone help me???
kenmacker said:
The download link only has a file with pictures in it. File says sf baltimore...can someone help me???
Click to expand...
Click to collapse
Same for me, many strange JPEG named Baltimore lol
Someone could post a new link with the good files ?
Thanks.
Glad to know I wasn't the only one having that problem...Could someone please help us out...I love my wikipad and am super excited to root it, a million thanks in advance...
does not work
So, got the zip file, downloading the backup, but there are no instructions or read me in the file. So how do we root the wikipad?
Thanks
gmvolk said:
So, got the zip file, downloading the backup, but there are no instructions or read me in the file. So how do we root the wikipad?
Thanks
Click to expand...
Click to collapse
The zip file is a wrong one, we need a reupload.
Other zip
NgXAlex said:
The zip file is a wrong one, we need a reupload.
Click to expand...
Click to collapse
I downloaded it when it was called "just for you.zip" now the zip just has stuff about baltimore. Hopefully we'll get something to root the Wikipad soon. It's a good tablet, but it needs button mapping and I want to see if I can get rid of some of the useless google apps.
Thanks
gmvolk said:
I downloaded it when it was called "just for you.zip" now the zip just has stuff about baltimore. Hopefully we'll get something to root the Wikipad soon. It's a good tablet, but it needs button mapping and I want to see if I can get rid of some of the useless google apps.
Thanks
Click to expand...
Click to collapse
Yep, link is wrong... Hope someone can reupload or give a way to manually root it.
Sorry not this week. My wife's sister got married yesterday, & I'm very tired... -- Sent from my Amazon Kindle Fire using XDA Premium HD app
BrooklynNY said:
Sorry not this week. My wife's sister got married yesterday, & I'm very tired... -- Sent from my Amazon Kindle Fire using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, no probs, rest well
Let us know.
New Link.
This is not exactly a mirror but a new upload. Idk if I can even do that but its needed.
Root does work and there are instructions inside the zip.
The original download link works as well because I've seen that weird download link while trying to download via mobile network. After switching to WiFi it was there bright and clear.
[Edit]
https://mega.co.nz/#!ENohTKDS!46cW64FqKtCKXV1PWtoby9KWcg09M7nSJv6TmZxGU6g
Your welcome
Vono123 said:
This is not exactly a mirror but a new upload. Idk if I can even do that but its needed.
Root does work and there are instructions inside the zip.
The original download link works as well because I've seen that weird download link while trying to download via mobile network. After switching to WiFi it was there bright and clear.
https://
mega.co.nz/#!ENohTKDS!46cW64FqKtCKXV1PWtoby9KWcg09M7nSJv6TmZxGU6g
Connect the link and of course no spaces. Your welcome
Click to expand...
Click to collapse
You are a god, thanks my friend, all files are ok
The old link is ok, but it send to a wrong zip file named: sf baltimore.ddtsf with many jpeg files inside instead of the good files lol
NgXAlex said:
You are a god, thanks my friend.
Click to expand...
Click to collapse
Yup yup! I'd also create a backup of your own, not saying the one provided is bad. But on my device it stops the G-Sensor from functioning. Could just be my device though. Just a tip aha.
Hello guys,
I just received my Wikipad 7, it's a very great console without big audio lag unlike my Nvidia Shield...
Controls are excellent !
I just rooted my Wikipad, but I seen it's only a Tegra 3 T30L (not a T30S as described on first Wikipad Details before its release...)
So it's blocked at 1.3Ghz for 1 core and 1.2Ghz for 4 cores (instead of 1.5Ghz-1.4ghz as promised).
This tablet is a Nexus 7 clone lol So maybe an overclocked kernel is possible ? We can also dump the boot etc. with the ClockworkMod Recovery.
Thanks for your help.
I also made a topic in Q/A forum.
[ROM][Exynos]N910UXXU1ANIF Android 4.4.4[HongKong]
AP:N910UXXU1ANIF
CP:N910UXXU1ANIF
CSC:N910UZZH1ANIF
Download:
http://pan.baidu.com/s/1nir3g
Password:
rrws
Thanks romup.com
Bounty for R00T
Haha! the thread is up for the Hong Kong version 910U....
I promise a bounty reward for the first one to come with a root :victory:
Rooted?
Is it possible that the 910U has been rooted?
Just found this post on a chinese forum. Used google translate, but not sure... can someone confirm?
http://www.shuaji.net/samsung/note4/N910U/2014100620722.html
The links asks me for a password?
For root, someone please extract the .tar.md5 file (rename to .tar, open with WinRAR or untar or one of many other archivers that can use .tar), extract the recovery.img file, and post it in the CF-Auto-Root thread: http://forum.xda-developers.com/showthread.php?t=1980683
lqhorochi said:
[ROM][Exynos]N910UXXU1ANIF Android 4.4.4[HongKong]
Download:
http://pan.baidu.com/s/1nir3g
Password:
rrws
Thanks romup.com
Click to expand...
Click to collapse
Chainfire said:
The links asks me for a password?
For root, someone please extract the .tar.md5 file (rename to .tar, open with WinRAR or untar or one of many other archivers that can use .tar), extract the recovery.img file, and post it in the CF-Auto-Root thread: http://forum.xda-developers.com/showthread.php?t=1980683
Click to expand...
Click to collapse
Hi Chainfire,
Thanks for your interest Yay!
I think the password is the one written above, which is " rrws ".
SAO said:
Hi Chainfire,
Thanks for your interest Yay!
I think the password is the one written above, which is " rrws ".
Click to expand...
Click to collapse
Doh, blind as a bit, apparently. Downloading now, it's going very slow, though.
Chainfire said:
Doh, blind as a bit, apparently. Downloading now, it's going very slow, though.
Click to expand...
Click to collapse
hahahaha. happens to all of us.
i'm downloading also. 15-20mins apparently on my side. i was going to retrieve the md5, but i guess you are on it so i'll cancel my download (might go faster for you after).
SAO said:
hahahaha. happens to all of us.
i'm downloading also. 15-20mins apparently on my side. i was going to retrieve the md5, but i guess you are on it so i'll cancel my download (might go faster for you after).
Click to expand...
Click to collapse
Let me know if this works: http://download.chainfire.eu/557/CF-Root/CF-Auto-Root/CF-Auto-Root-trhplte-trhpltexx-smn910u.zip
Also let me know if it actually shows you a big red Android (or maybe another color, or maybe nothing) during the process.
Chainfire said:
Let me know if this works: http://download.chainfire.eu/557/CF-Root/CF-Auto-Root/CF-Auto-Root-trhplte-trhpltexx-smn910u.zip
Click to expand...
Click to collapse
You want me to install this directly on the phone right ? (sorry i'm a n00b)
Chainfire said:
Let me know if this works: http://download.chainfire.eu/557/CF-Root/CF-Auto-Root/CF-Auto-Root-trhplte-trhpltexx-smn910u.zip
Also let me know if it actually shows you a big red Android (or maybe another color, or maybe nothing) during the process.
Click to expand...
Click to collapse
Works perfectly on my factory n910u!
Did you need reminding that you are legendary!??!?
Thanks Chainfire and really proud that Exynos got the first XDA root!
Mod Edit
Please attach this to your other thread.
http://forum.xda-developers.com/note-4/general/rom-n910cxxu1anif-android-4-4-4-t2896949
No need for multiple firmware threads
Thread closed
malybru
Forum Moderator
Hello all,
anyone can help? some of you having international HW2 please pull needed images and post it as soon as possible.
I am sure there should be someone able to do this task.
please please please
thanks for help and regards!
Leo-L09S 2.1.5 EXCLUSIVE
_Firmware_West European_Nonspecific_05014AHH.zip
*Download | Size: 950 MB | Date: 2017-04-03 13:47:27
---------- Post added at 11:12 AM ---------- Previous post was at 11:05 AM ----------
https://easy-firmware.com/index.php?a=browse&b=category&id=25397
Ohhhh thank you. How do I flash this firmware? I have test software right now
Sent from my iPhone using Tapatalk
jacklam2005 said:
Leo-L09S 2.1.5 EXCLUSIVE
_Firmware_West European_Nonspecific_05014AHH.zip
*Download | Size: 950 MB | Date: 2017-04-03 13:47:27
---------- Post added at 11:12 AM ---------- Previous post was at 11:05 AM ----------
https://easy-firmware.com/index.php?a=browse&b=category&id=25397
Click to expand...
Click to collapse
thanks,
unfortunately download is exclusive, need to pay for that.
I think the best one is 2.1.7 firmware general (multilanguage for sure).
anyway, about to flash, I cant determinate method, it is zip file but maybe there are images inside, if this, we need to use adb command (quite easy).
will wait for someone that can upload images by a normal link, and maybe a working recovery too, just in case files need to be flashed.
regards
wildlime said:
Ohhhh thank you. How do I flash this firmware? I have test software right now
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hi!
what do you mean for " I have test software right now " ??
have you got the zip? if yes pls let us know about, it contain images? wich ones (name) ?
after this, if you can upload it in some way it will be great !!
regards
giangishanghai said:
hi!
what do you mean for " I have test software right now " ??
have you got the zip? if yes pls let us know about, it contain images? wich ones (name) ?
after this, if you can upload here it will be great !!
regards
Click to expand...
Click to collapse
It's ok very easy. Finally I have a proper version of eu software
Sent from my iPhone using Tapatalk
wildlime said:
It's ok very easy. Finally I have a proper version of eu software
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
best one should be 2.1.7 firmware general
if you have it tell us what is inside zip file, just to be sure is all included and wich method you have used to install or flash it, I am courious.......
giangishanghai said:
best one should be 2.1.7 firmware general
if you have it tell us what is inside zip file, just to be sure is all included and wich method you have used to install or flash it, I am courious.......
Click to expand...
Click to collapse
Yes installed and running fine. Still shows my hardware as DLXX. But that's ok. I just followed the guide inside. Activate debugging and run the exe
Sent from my iPhone using Tapatalk
wildlime said:
Yes installed and running fine. Still shows my hardware as DLXX. But that's ok. I just followed the guide inside. Activate debugging and run the exe
Click to expand...
Click to collapse
Exe file? Very strange for a firmware.....
Anyway, happy is working for you.
Maybe in the spirit of xda you can upload it......... But I never see an exe file as firmware, not for watch and not for phones.
Maybe I'm wrong...... Nevermind
giangishanghai said:
Exe file? Very strange for a firmware.....
Anyway, happy is working for you.
Maybe in the spirit of xda you can upload it......... But I never see an exe file as firmware, not for watch and not for phones.
Maybe I'm wrong...... Nevermind
Click to expand...
Click to collapse
Yes this is how Huawei does it for there watch. I had updated previously work test software from work and it's the same procedure
Sent from my iPhone using Tapatalk
wildlime said:
Yes this is how Huawei does it for there watch. I had updated previously work test software from work and it's the same procedure
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I've never heard this thing, but there's always more to learn !
and now, do you mind to share the file?
regards
From the easy-firmware link provided by jacklam2005,
https://easy-firmware.com/index.php?a=browse&b=category&id=25397
I see that this firmware is available.
Leo-L09S 2.1.7 EXCLUSIVE
_Firmware_general_05014AHH.zip
I'm having similar questions on how to get English on the Huawei Watch 2 - Chinese version?
How do you flash this firmware to the watch?
Is this the correct firmware?
Thank you
base6 said:
From the easy-firmware link provided by jacklam2005,
https://easy-firmware.com/index.php?a=browse&b=category&id=25397
I see that this firmware is available.
Leo-L09S 2.1.7 EXCLUSIVE
_Firmware_general_05014AHH.zip
I'm having similar questions on how to get English on the Huawei Watch 2 - Chinese version?
How do you flash this firmware to the watch?
Is this the correct firmware?
Thank you
Click to expand...
Click to collapse
hello,
by the firmware name looks it is correct or let's say...it should be, but....to download from that link you need to pay and to test if is correct or not it is a risk.......
back to your question: normally to flash firmware you need to have .img files, with adb command you can push into watch from pc.
if file is zip, first you have to install recovery (watch) and by that you can flash file into .
our fellow-friend wildlime says that the one from the link is an exe file (quite strange for me, but that's it), in this case I dont know how to do, most probabably by pc cause you cant run exe files from watch....
to be more clear try to check this out ( credit to rickboy324 for the good job and help) : https://forum.xda-developers.com/huawei-watch/general/tutorial-complete-guide-how-to-flash-t3307137
DO NOT try with files included on the link I gave you, that is for HW 1st generation, rom are different from HW2. keep it just to understand how it normally works.
anyway, we have to wait some screenshot to be sure about, or, better than better, file uploaded here for free..
regards
giangishanghai said:
hello,
by the firmware name looks it is correct or let's say...it should be, but....to download from that link you need to pay and to test if is correct or not it is a risk.......
back to your question: normally to flash firmware you need to have .img files, with adb command you can push into watch from pc.
if file is zip, first you have to install recovery (watch) and by that you can flash file into .
our fellow-friend wildlime says that the one from the link is an exe file (quite strange for me, but that's it), in this case I dont know how to do, most probabably by pc cause you cant run exe files from watch....
to be more clear try to check this out ( credit to rickboy324 for the good job and help) : https://forum.xda-developers.com/huawei-watch/general/tutorial-complete-guide-how-to-flash-t3307137
DO NOT try with files included on the link I gave you, that is for HW 1st generation, rom are different from HW2. keep it just to understand how it normally works.
anyway, we have to wait some screenshot to be sure about, or, better than better, file uploaded here for free..
regards
Click to expand...
Click to collapse
Thanks for the reply.
I'll wait until a more concrete solution comes up to change the language to English.
In the meantime, I will just use the Chinese for now.
base6 said:
Thanks for the reply.
I'll wait until a more concrete solution comes up to change the language to English.
In the meantime, I will just use the Chinese for now.
Click to expand...
Click to collapse
the only way to change language is to change firmware, chinese HW watches has only chinese language.
I think is question of time, there will be here someone able to pull images by adb command, I cant cause I am in China with a chinese watch......
hitting thanks button is more than welcome
regards
How are you installing the apps for the HW Watch 2?
I only see a few Chinese apps on the Huawei APP store on the watch.
How is there no WeChat or more apps?
I'm using Android Wear (US version) on my iPhone to connect to the watch.
I hope that wildlime person is not joking and is willing to share.
base6 said:
Thanks for the reply.
I'll wait until a more concrete solution comes up to change the language to English.
In the meantime, I will just use the Chinese for now.
Click to expand...
Click to collapse
Will firmware later. Pretty easy
Sent from my iPhone using Tapatalk
It's not a rom.
Tried it, almost killed my watch.
Here is the EU firmware https://drive.google.com/file/d/0B_ZC_EcYPcnrc0E1b3dMWmZKalE/view?usp=drivesdk
Sent from my LON-L29 using Tapatalk
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
mikeshl said:
Tried it, almost killed my watch.
Click to expand...
Click to collapse
How is that possible. The directions are in the word document. So so easy
Sent from my LON-L29 using Tapatalk
base6 said:
How are you installing the apps for the HW Watch 2?
I only see a few Chinese apps on the Huawei APP store on the watch.
How is there no WeChat or more apps?
I'm using Android Wear (US version) on my iPhone to connect to the watch.
I hope that wildlime person is not joking and is willing to share.
Click to expand...
Click to collapse
hello,
first, if u use iphone, android wear is only one, so it is ok.
second, you dont need to have apps into watch, with iphone you can only receive notifications on watch even if there are no apps inside.
if you want to install apps into watch you have to do with adb command (adb install nameoftheapp.apk). you have to extract from the original apk ONLY micro.apk. you will find in "res" and than "raw" folder.
example: if you want to play with watchmaker, you have to install it into iphone from apple store, than you have to download an apk from the net. after you have watchmaker apk in your pc, open it with 7zip or similar, you will find "res" folder, open it and you will find "raw" folder. inside it there is micro.apk, pull this apk out and install it by adb command into watch. this is the way phone interact with watch with this app.
this is for almost all apps you want into watch.
about wechat, you cant install into watch, there is no micro.apk inside and the whole apk it wont work. again, with iphone, no need, you will just receive notifications (without the name of the sender..... just message receive....)
back to the topic of this treath, i am downloading file from our friend, i will check and report later.
regards
I want to know what is 're-partition' option in odin mode? Can I flash rom without tick re-partition option?
Sent from my SHV-E210S using Tapatalk
@-Hope- @Droidriven can you help me? [emoji4]
Sent from my SHV-E210S using Tapatalk
[email protected] said:
I want to know what is 're-partition' option in odin mode? Can I flash rom without tick re-partition option?
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
You can flash without using the re-partition option. That is usually used when flashing the PIT file along with the firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
You can flash without using the re-partition option. That is usually used when flashing the PIT file along with the firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thank you for your reply...!!!
Sent from my SHV-E210S using Tapatalk
Droidriven said:
You can flash without using the re-partition option. That is usually used when flashing the PIT file along with the firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Can I upgrade android 4.3 to android 4.4.4 without using pit file?
Sent from my SHV-E210S using Tapatalk
[email protected] said:
Can I upgrade android 4.3 to android 4.4.4 without using pit file?
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
Yes, you can upgrade but you shouldn't need the PIT, the PIT is only used when one or more of your partitions are corrupted. Flashing PIT repairs your partition structure.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Yes, you can upgrade but you shouldn't need the PIT, the PIT is only used when one or more of your partitions are corrupted. Flashing PIT repairs your partition structure.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
I searched many sites for download compatible pit file for my device. Because somtime it will be need to me. But I can't find the pit file. Do you know a web site for download a pit file? My device is samsung galaxy s3. (Shv-e210s)
Sent from my SHV-E210S using Tapatalk
[email protected] said:
I searched many sites for download compatible pit file for my device. Because somtime it will be need to me. But I can't find the pit file. Do you know a web site for download a pit file? My device is samsung galaxy s3. (Shv-e210s)
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
You can use terminal emulator or adb to pull a copy of your PIT file directly from the device.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
You can use terminal emulator or adb to pull a copy of your PIT file directly from the device.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
How do it??
Sent from my SHV-E210S using Tapatalk
[email protected] said:
How do it??
Sent from my SHV-E210S using Tapatalk
Click to expand...
Click to collapse
Why can't you at least TRY finding something yourself. I will not do all the searching for you. I told you what you need and you know what your device is so do some searching to find how to pull PIT from your model number.
If the device is that important to you then you should be willing to do what it takes to learn.
@[email protected], read my updated info. I'm trying to help, but you need to understand that helping you does not mean doing all the hard work for you. I'm trying to teach you how to find what you need and how to search for the right thing, I'm not just trying to help you fix your device the way you want. If you're going to play around with your device then the most important thing to learn is how to find the correct information for what you need.
Try doing some searches like the example below.
"How to (whatever you want/need to know)"
"What is (whatever you want/need to know)"
"(Whatever you are looking for or want to know)"
I did a simple Google search for:
"How to extract PIT from Galaxy S3"
This was the first link in results:
http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
That search took me 20 seconds to find. How hard was that?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Why can't you at least TRY finding something yourself. I will not do all the searching for you. I told you what you need and you know what your device is so do some searching to find how to pull PIT from your model number.
If the device is that important to you then you should be willing to do what it takes to learn.
@[email protected], read my updated info. I'm trying to help, but you need to understand that helping you does not mean doing all the hard work for you. I'm trying to teach you how to find what you need and how to search for the right thing, I'm not just trying to help you fix your device the way you want. If you're going to play around with your device then the most important thing to learn is how to find the correct information for what you need.
Try doing some searches like the example below.
"How to (whatever you want/need to know)"
"What is (whatever you want/need to know)"
"(Whatever you are looking for or want to know)"
I did a simple Google search for:
"How to extract PIT from Galaxy S3"
This was the first link in results:
http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
That search took me 20 seconds to find. How hard was that?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Its worked... thank you for your link
Sent from my SHV-E210S using Tapatalk
This is non android based I have been looking for a while to try and find some help.... I hope the admins do not delete post .... But what I am looking for is can anyone edit firmware or would know where i can go to get help?
Edit: sorry I did not see the sticky until after I posted the question maybe an admin can move it to the right spot of the forum.
madmat276 said:
This is non android based I have been looking for a while to try and find some help.... I hope the admins do not delete post .... But what I am looking for is can anyone edit firmware or would know where i can go to get help?
Edit: sorry I did not see the sticky until after I posted the question maybe an admin can move it to the right spot of the forum.
Click to expand...
Click to collapse
What exactly are you trying to do? What modifications are you trying to make to the firmware?
Sent from my SM-S767VL using Tapatalk
Update
Ok I have a wide format printer.... That has two firmware releases.... I need to get the new one edited some how..... I could send you a PM with more info... If you think you can help.
Droidriven said:
What exactly are you trying to do? What modifications are you trying to make to the firmware?
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
update
Does anyone think they could help? or know of a forum that edits firmware?
madmat276 said:
Does anyone think they could help? or know of a forum that edits firmware?
Click to expand...
Click to collapse
For phones? Maybe
For printers? No.
Sent from my SM-S767VL using Tapatalk
Yeah no. What you're asking for can theoretically be done but it will require a lot of work reverse engineering the firmware, and by a lot I really mean it. Firmware is almost never open source so you won't find the source code anywhere.
What are you trying to do specifically?
9up! said:
Yeah no. What you're asking for can theoretically be done but it will require a lot of work reverse engineering the firmware, and by a lot I really mean it. Firmware is almost never open source so you won't find the source code anywhere.
What are you trying to do specifically?
Click to expand...
Click to collapse
I sent you a message to your inbox.