Hey Guys,
I've been spending hours & hours to try to port TWRP (or PhilZ) to the stock recovery from my rugged BlackView BV5000.
Not going to explain the reasons here, as everyone knows them already (my top-of-the-list reason being the ability to ghost & root my device), but I've managed to get the stock recovery from the manufacturer, and have been using some tools to *auto-port* CWM/TWRP/PHILZ to the stock recovery.img file without success.
File available here: https://mega.nz/#!y1plzQgR!irTUJbdpHYuqGJ3dV8ACOXZBlvuTK1S-pag_EbZJETU
I am asking for all people with more experience than me in porting or coding Android files for some kind help... Hope someone could bring light on us! ^_^
Cheers!
Nick.
Surfeur-des-Reves said:
Hey Guys,
I've been spending hours & hours to try to port TWRP (or PhilZ) to the stock recovery from my rugged BlackView BV5000.
Not going to explain the reasons here, as everyone knows them already (my top-of-the-list reason being the ability to ghost & root my device), but I've managed to get the stock recovery from the manufacturer, and have been using some tools to *auto-port* CWM/TWRP/PHILZ to the stock recovery.img file without success.
File available here: https://mega.nz/#!y1plzQgR!irTUJbdpHYuqGJ3dV8ACOXZBlvuTK1S-pag_EbZJETU
I am asking for all people with more experience than me in porting or coding Android files for some kind help... Hope someone could bring light on us! ^_^
Cheers!
Nick.
Click to expand...
Click to collapse
I hope you are aware of this tool: Easy TWRP Installer
It creates TWRP and auto flashes it to your phone with 1 click.
Just plug your phone in and press start.
Violla. You have TWRP.
janekmuric said:
I hope you are aware of this tool: Easy TWRP Installer
It creates TWRP and auto flashes it to your phone with 1 click.
Just plug your phone in and press start.
Violla. You have TWRP.
Click to expand...
Click to collapse
Hi
Of course I tried this one you mention, as well as several others (for PhilZ, CWM...) and the result was same, it ends up with some errors and impossible to continue the operation. Moreover, most of these tools require a rooted device, and this one cannot be rooted at the moment by any automatic tool.... This is also one of the reasons I request a custom recovery
Surfeur-des-Reves said:
Hi
Of course I tried this one you mention, as well as several others (for PhilZ, CWM...) and the result was same, it ends up with some errors and impossible to continue the operation. Moreover, most of these tools require a rooted device, and this one cannot be rooted at the moment by any automatic tool.... This is also one of the reasons I request a custom recovery
Click to expand...
Click to collapse
You are requesting a custom recovery which to be flashed requires root.
janekmuric said:
You are requesting a custom recovery which to be flashed requires root.
Click to expand...
Click to collapse
Not really, I can always flash with SP Flash Tools, as I have the full factory ROM, the scatter & original stock recovery.img
Link is here: https://mega.nz/#!y1plzQgR!irTUJbdpHYuqGJ3dV8ACOXZBlvuTK1S-pag_EbZJETU
I wish someone skilled in the process could help us...
Surfeur-des-Reves said:
Not really, I can always flash with SP Flash Tools, as I have the full factory ROM, the scatter & original stock recovery.img
Link is here: https://mega.nz/#!y1plzQgR!irTUJbdpHYuqGJ3dV8ACOXZBlvuTK1S-pag_EbZJETU
I wish someone skilled in the process could help us...
Click to expand...
Click to collapse
The Magic TWRP Installer can create a recovery.img file which you can flash with SP Flashtool. Could you please explain what exactly errors are you getting? I think there is a higher chance of success if we try to resolve the issue with TWRP installer, than if you just kept asking for help.
janekmuric said:
The Magic TWRP Installer can create a recovery.img file which you can flash with SP Flashtool. Could you please explain what exactly errors are you getting? I think there is a higher chance of success if we try to resolve the issue with TWRP installer, than if you just kept asking for help.
Click to expand...
Click to collapse
There were 2 kinds of errors; the first one being about "regions overlapping", and the second one being with "magic headers"...
BV5000 Root
Surfeur-des-Reves said:
this one cannot be rooted at the moment by any automatic tool
Click to expand...
Click to collapse
Hey, it is extremely easy to root the BV5000. Just copy this attached file to an external SD (it might work if in internal memory but I haven't tried it).
Settings => About Phone => Wireless Updates => 3 dots (Menu Key) => Local Updates => Browse and select the update.zip file and wait till the phone reboots.
The file and method are taken from a thread in movilesdualsim.com.
Enjoy
I made Philz and carliv CWM ages ago for this phone
bigrammy said:
I made Philz and carliv CWM ages ago for this phone
Click to expand...
Click to collapse
Probably it was part of your secret project ( or your are Hanuma50.... ? ).....because obviously working custom recovery is downloadable only from 4pda.ru - if you know the Russian numbers what is needed for the registration....
The above mentioned update.zip method does not work on newer firmwares ( t.e. v.1.5.) of BV5000.
For those who are not familiar with the soul of MTK devices here is a description of the installation process to get TWRP and thereafter root on the phone:
( use google translator):
http://mdforum.ru/showthread.php?t=26183
(It does not matter that description relates to MT6592 devices!)
custom recovery + scatter file of firmware v.1.5 + SuperSu ( + some others, t.e. SP Flashtools, etc):
https://drive.google.com/file/d/0BzkbIWPgNcg7VlNiWHNWOG5iQ0E/view?usp=sharing
bandino said:
Probably it was part of your secret project ( or your are Hanuma50.... ? ).....because obviously working custom recovery is downloadable only from 4pda.ru - if you know the Russian numbers what is needed for the registration....
The above mentioned update.zip method does not work on newer firmwares ( t.e. v.1.5.) of BV5000.
Click to expand...
Click to collapse
I wanted to see how long it would take them to make their own working recovery. :laugh:
A lot of the time 4PDA and other forums seem to give no credit or links to the original dev's.
Lucky for them they have @hanuma who is a Great dev so credit to him for getting the TWRP working. Well done bro. :highfive:
You should link to @hanuma or one of his posts so people can give him Thanks also you should really asked his permission to post the mirror link to the recovery.
bigrammy said:
I wanted to see how long it would take them to make their own working recovery. :laugh:
A lot of the time 4PDA and other forums seem to give no credit or links to the original dev's.
Lucky for them they have @hanuma who is a Great dev so credit to him for getting the TWRP working. Well done bro. :highfive:
You should link to @hanuma or one of his posts so people can give him Thanks also you should really asked his permission to post the mirror link to the recovery.
Click to expand...
Click to collapse
I have got his permission for public his work here.
Direct link for downloading and for thanks:
http://4pda.ru/forum/index.php?showtopic=685816&st=840#entry44610609
Related
Hi all,
Just got my Star S5 in the mail, while I'm in the process of removing all chinese bloatware, I'm hitting a wall here. To remove baidu I need root (which i want anyway, actually), but I can't seem to boot into cwm-recovery after creating my own with smart phone flash tools and mtk droid root & tools. None of the other options listed online work either! Is there a secret button combination or something to get into recovery or does smart phone flash tools SAY it flashed the boot.img and recovery.img but doesn't it actually do it?
Pressing vol+ and power, then when green android pops up on screen releasing power but holding vol+ doesn't work (it just continues to boot regularly)!
Edit: ninonirvana's solution below worked to get into CWM.. however, flashing the superuser-binary doesn't work on android 4.2 and up. I had to use SuperSU, everything works now!
henkpeters said:
Hi all,
Just got my Star S5 in the mail, while I'm in the process of removing all chinese bloatware, I'm hitting a wall here. To remove baidu I need root (which i want anyway, actually), but I can't seem to boot into cwm-recovery after creating my own with smart phone flash tools and mtk droid root & tools. None of the other options listed online work either! Is there a secret button combination or something to get into recovery or does smart phone flash tools SAY it flashed the boot.img and recovery.img but doesn't it actually do it?
Pressing vol+ and power, then when green android pops up on screen releasing power but holding vol+ doesn't work (it just continues to boot regularly)!
Click to expand...
Click to collapse
Hello, I have accessed the recovery as follows, nexus4toolkit in this reboot options menu No. 21 No. 4 after reboot recovery and already
Hi, you can put a link of recovery and how to root? thanks
---------- Post added at 01:14 PM ---------- Previous post was at 12:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2215393 you can use this tool to restar in to recovery
I can't seem to find the tutorial I used yesterday (it was today, actually, 2.30am) but I read back the original scatter-file and rom with mtk droid root & tools, afterwards I used spflashtool SP_Flash_Tool_v3.1304.0.119 to read back the original rom (cache-HEX as endpoint) and used mtk droid root & tools again to create my new boot.img and recovery.img. Lastly, i followed this <<USE SUPERSU INSTEAD OF SUPERUSER>> tutorial, flashing only my newly created recovery.img and boot.img, after using your nexus toolkit to get into cwm. I backed up my rom now AND rooted, so all is well
NOTE: as stated above, using superuser doesn't work on android 4.2 and up, you should flash superSU instead!
I know this phone is new and I may get it in the future, once the rooting process is is figured out for MT6589, it may be useful for other phones with the same chip. Can someone write a simple step-by-step instructions on how to root it for others so there won't be a bunch of scattered threads and questions about the same thing. Thanks in advance!
Whyzor said:
I know this phone is new and I may get it in the future, once the rooting process is is figured out for MT6589, it may be useful for other phones with the same chip. Can someone write a simple step-by-step instructions on how to root it for others so there won't be a bunch of scattered threads and questions about the same thing. Thanks in advance!
Click to expand...
Click to collapse
One +
It is no one key root tool for android 4.1 or android 4.2. I think the best way for root the phone is flashing the phone with rooted ROM if it exists
henkpeters said:
I can't seem to find the tutorial I used yesterday (it was today, actually, 2.30am) but I read back the original scatter-file and rom with mtk droid root & tools, afterwards I used spflashtool SP_Flash_Tool_v3.1304.0.119 to read back the original rom (cache-HEX as endpoint) and used mtk droid root & tools again to create my new boot.img and recovery.img. Lastly, i followed this <<USE SUPERSU INSTEAD OF SUPERUSER>> tutorial, flashing only my newly created recovery.img and boot.img, after using your nexus toolkit to get into cwm. I backed up my rom now AND rooted, so all is well
NOTE: as stated above, using superuser doesn't work on android 4.2 and up, you should flash superSU instead!
Click to expand...
Click to collapse
pls write instructions step by step.and is it possible to give us scatter file and recovery.img?
guapon said:
pls write instructions step by step.and is it possible to give us scatter file and recovery.img?
Click to expand...
Click to collapse
:good::fingers-crossed::fingers-crossed::good:
Hi..
can someone who already own Star S5 tell some info about camera, and can this phone record 1080p video?
misokralj said:
Hi..
can someone who already own Star S5 tell some info about camera, and can this phone record 1080p video?
Click to expand...
Click to collapse
no it records 720p. max
ı manage to root S5...ı found correct recovery with scatter file link below.But its china language but not ımportant ıt works..
first intall super su and copy to sd card after flash recovery.img with flash tool
to flash the the supersu to the phone you must enter the recovery (that you flashed with flash tool...) but power and volume + is not working so we can enter the recovery with a program like nexus 4 toolkit or Android Toolkit
http://download.chainfire.eu/315/SuperSU...-v1.25.zip
http://www.4shared.com/rar/PzQiYFxi/CWM_Recovery.html
http://www.4shared.com/rar/m33fLNgf/MTK6...30401.html
S5 Root - windows 8 preloader driver problem
guapon said:
ı manage to root S5...ı found correct recovery with scatter file link below.But its china language but not ımportant ıt works..
first intall super su and copy to sd card after flash recovery.img with flash tool
to flash the the supersu to the phone you must enter the recovery (that you flashed with flash tool...) but power and volume + is not working so we can enter the recovery with a program like nexus 4 toolkit or Android Toolkit
http://download.chainfire.eu/315/SuperSU...-v1.25.zip
http://www.4shared.com/rar/PzQiYFxi/CWM_Recovery.html
http://www.4shared.com/rar/m33fLNgf/MTK6...30401.html
Click to expand...
Click to collapse
Hi,
Just came back, wanted to flash the recovery - but I can't seem to the MT65xx Preloader to install (I'm on windows 8 64 bit) - is there something special I need to do to install them? (I used the ones from GizBeat Combo for the H7500+ MT6589 drivers) - it just won't install the VCOM even if I select it by myself - it says it has not signtature - what am I doing wrong?
guapon said:
ı manage to root S5...ı found correct recovery with scatter file link below.But its china language but not ımportant ıt works..
first intall super su and copy to sd card after flash recovery.img with flash tool
to flash the the supersu to the phone you must enter the recovery (that you flashed with flash tool...) but power and volume + is not working so we can enter the recovery with a program like nexus 4 toolkit or Android Toolkit
http://download.chainfire.eu/315/SuperSU...-v1.25.zip
http://www.4shared.com/rar/PzQiYFxi/CWM_Recovery.html
http://www.4shared.com/rar/m33fLNgf/MTK6...30401.html
Click to expand...
Click to collapse
the recovery is in chines :victory::laugh:
ninonirvana said:
the recovery is in chines :victory::laugh:
Click to expand...
Click to collapse
Hi again,
I've managed (finally to trick windows 8 into installing the vcom...) to flash the chiniese green recovery - but I have no idea how to navigate and what option to choose - since I saw SD I went to that one and clicked with the power button - writes something in chinese in white and does nothing? Am I doing something wrong in here? Is there a special way to navigate that recovery?
Shoud I have placed the supersu zip in a specific folder? rename it perhaps to update.zip or something like that?
Thank you again for all your help
yulypis said:
Hi again,
I've managed (finally to trick windows 8 into installing the vcom...) to flash the chiniese green recovery - but I have no idea how to navigate and what option to choose - since I saw SD I went to that one and clicked with the power button - writes something in chinese in white and does nothing? Am I doing something wrong in here? Is there a special way to navigate that recovery?
Shoud I have placed the supersu zip in a specific folder? rename it perhaps to update.zip or something like that?
Thank you again for all your help
Click to expand...
Click to collapse
If you post a screenshot of the recovery menus, then we could get someone who understands Chinese to do a line-by-line translation. Or maybe even Google Translate
yulypis said:
Hi again,
I've managed (finally to trick windows 8 into installing the vcom...) to flash the chiniese green recovery - but I have no idea how to navigate and what option to choose - since I saw SD I went to that one and clicked with the power button - writes something in chinese in white and does nothing? Am I doing something wrong in here? Is there a special way to navigate that recovery?
Shoud I have placed the supersu zip in a specific folder? rename it perhaps to update.zip or something like that?
Thank you again for all your help
Click to expand...
Click to collapse
It works - thank you all that helped and got us here
---------- Post added at 07:29 PM ---------- Previous post was at 07:10 PM ----------
Whyzor said:
If you post a screenshot of the recovery menus, then we could get someone who understands Chinese to do a line-by-line translation. Or maybe even Google Translate
Click to expand...
Click to collapse
Thank you, but I already managed to flash the supersu - thank you anyway.
After rooting the device I pushed the NetworkLocation.apk into system/app - but to no avail - I still can't get any google location.
Does anybody know what can be done?
Would someone PLEASE be so kind to put up a 100% secure tutorial?
I really dont want to get an expensive brick to throw out of the window...
Maybe with video, or much screenshots... That would be great!
Myrothas said:
Would someone PLEASE be so kind to put up a 100% secure tutorial?
I really dont want to get an expensive brick to throw out of the window...
Maybe with video, or much screenshots... That would be great!
Click to expand...
Click to collapse
+1
I just ordered one, so if someone can write tut for root..
Thanks..
I would like also a guide, maybe even with a non Chinese (english) recovery and rom..
I just got the the phone - and its sweet And I must admit I did like the price also
I got this phone as a gift just recently and I have found it to be a very good device for a great price, but at times, I feel like it can go even more to hiigher potentials if it can be rooted. Since it's a new phone, there are no tutorials for it on the internet. The phone runs Android 4.1.2 stock w/ TouchWiz.
I'll be ready to give any information possible to help in the rooting of this device. I would love it if some of the developers here could make this happen, I'd be the happiest Android user in the world!
Universal Root
http://forum.xda-developers.com/showthread.php?p=28178105
Rooting Unsuccessful tried almost every method available
Dear Fellows,
Disclaimer: I'm very new (5 days old ) to Android Development, Rooting and Custom ROM installation and some things which are obvious for others, are New n Unknown to me.
I bought this device Samsung Galaxy S-GT7262 (Actually fell for the marketing gimmick of Samsung as Galaxy Series).
Here comes the Tricked part, This phone comes with Spreadtrum SC6820 1 GHz processor powering all chinese phones.( To figure this out took me 2 sleepless nights).
I tried all methods prescribed in google search and xda forum to Root: (the worst part is reading others saying it worked like a charm for them not in my case :crying
1. Cydia Impactor
2. Unlockroot
3. Motochopper
4, Rootmaster
5.Vroot
6.Kingo Andro Root
7.Galaxy Victory root by niemasd
8. Even galaxy s duos rooting kit (but found the kernel is different)
9. Z4Root
10. Odin flash CWM recovery image from http://forum.xda-developers.com/showthread.php?t=2165554 (random SC6820 kernel with cwm in it)
11. Above mentioned universal root as well
Trust me I have forgotten others
Method untried:
Spreadtrum Debug tool "ResearchDownload" (Reason: I dont want to end up with a bricked phone and too complex)
Lessons Learnt:
Samsung has shipped this phone with this "KERNEL-INS-S7262XXUAMJ3-1381823311.tar", which has patch for all security vulnerability defined in X-ray that why rooting didnt work. ( I Guess)
My state:
I have run around all through internet like a lunatic and hasnt slept for 5 days properly ended up with my head banging against wall.
Over all very nice experience in learning Android. I am going to sell this device if no help available.
Phone state:
Phone has lost its stock recovery mode(Volume Up+Power Buttons which used to work earlier). It boots only into downloading mode (Vol Dwn+Home+Power Buttons).
Other Functions working normally I guess
Request:
Can some one help in rooting this phone.
Or Can some one direct me in making a root and Custom recovery and Custom ROM for this phone.
Thanks to all the developers in the above mentioned list and numerous tutorials for all phones written for noobs (like me)
Dev's please help!!!
I am using this phone from couple of days and is a good phone... i have just upgraded to this phone from some unbranded China's android phone... because i can't find a way to root that phone... but now on star pro i have searched all the internet (no help found) and tried all the auto root apps included in the upper post... but none of them worked... im not a dev so need help... please help Some one... seems like buddy is interested in root of this phone... I WILL BE SO THANKFUL FOR ANY ONE HELPS.
can any body help me to root galaxy star pro gt-s7262??????????
root
there is one method , you have left !
you can root but only for advanced user who know how to use research download !
modify your boot.img by cywin
then flash it by spreadtrum flash tool , use any root tool , then u will have root acesss
search on xda - about boot.img root !
i am new to android, can anybody help me in getting required software and firmware files and boot.img files for samsung galaxy star pro GT - S6272.
Thanks
No Root available yet for GT-S7262
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
jhenu said:
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
Click to expand...
Click to collapse
give me your boot.img ! I will do root for you
boot.img file for samsung s-GT7262
anabhi said:
give me your boot.img ! I will do root for you
Click to expand...
Click to collapse
Hai Anabhi,
Thanks for your support!
Here is my boot.img uploaded at samsung-updates.com (Stock boot.img)
http://hotfile.com/dl/252694755/6a0d2d8/KERNEL-INS-S7262XXUAMJ3-1381823311.tar.html
Can you please make a recovery.img with CWM Recovery included in it.
Thanks in advance,
Jhenu
added root permission !
jhenu said:
Hai Anabhi,
Thanks for your support!
Here is my boot.img uploaded at samsung-updates.com (Stock boot.img)
http://hotfile.com/dl/252694755/6a0d2d8/KERNEL-INS-S7262XXUAMJ3-1381823311.tar.html
Can you please make a recovery.img with CWM Recovery included in it.
Thanks in advance,
Jhenu
Click to expand...
Click to collapse
https://db.tt/rd2PW94b
here is your insecure boot.img
have fun and press thanks button
instruction inside !
anabhi said:
give me your boot.img ! I will do root for you
Click to expand...
Click to collapse
I had downloaded a file from samsung-updates.com which is S7262XXUAMJ3_S7262ODDAMJ3_S7262XXUAMJ3_HOME.tar.md5
but i am unable to find any boot.img file.......
from where i can download it.
I found this forum very helpfull as i got response to my queries very fast.
thanks :good:
---------- Post added at 05:19 PM ---------- Previous post was at 05:12 PM ----------
jhenu said:
@wahab96
Please wait for some time unless some one creates a cwm recovery for this phone.
@abhi98194
@anabhi
Use odin 3.07 to flash boot.img and firmware from the samsung-updates.com (if u really want latest firmware, download stock from site)
Don't use the spreadtrum tool unless you have proper recovery.img with CWM mod in it and know what you are doing. The chance to brick the device is higher.
If you still want to go for it here is the tutorial http://forum.xda-developers.com/showthread.php?t=2165554
Also you cannot create CWM recovery (As far as I know, guide me if it is possible) in windows platform or using cygwin or Linux virtual machines. You need to have ubuntu 13.XX to be installed to begin with.
@yuvinderkumar
There are no CWM recovery (Custom Recovery) or Cyangenmod (Firmware) available for this phone. So I strongly advise to stop cross flashing recovery.img unless you are 100% sure of what you are doing.
This mobile comes with all security vulenarability patched, hence trying one click rooting methods won't work (my experience)
Using the android adb sideload if you push super user access, it will fail with signature verification error.
Either ways you definitely need the CWM recovery to push super user access into the /system.
I hope I have answered your queries
Click to expand...
Click to collapse
Can anybody make the cwm for the Samsung galaxy star pro duo GT-S7262.
Thanks
@yuvinderkumar
use this insecure boot.img
https://db.tt/rd2PW94b
open file.tar with 7-zip , then you can see boot.img !
How am I supposed to use this boot.img file in order to root my phone? I might not be a n00b, but I want to know how to do it perfectly in order to not brick my phone :S I'm willing to wait if someone is working on a safer and easier option as well.
Thanks for the push But!
@ anabhi & jhenu..... First of all thanks for the help... but question is, Can we get some detailed written tutorial for newbie like me So we don't get our devices bricked
wait it..
well , there is no soft working for root ! so there will be no easier way I think..
check this guys- howdoiupdate.com/root-samsung-galaxy-star-pro-phone/
and about cwm recovery -you all are in trouble because spreadtrum have no cm soruce !and not even support like mtk device , why samsung choosed sprd ×_× !
try all cwm for sc6820 device ! by iphone-china-forum.ru
you can take a little bit risk but u have no other choice. .
I bricked my device... Any help to recover that :'(
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
wahab96 said:
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
Click to expand...
Click to collapse
flash stock firmware using odin or download mode
guide available on google , don't worry
just follow steps correctly
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
am sorry , you have to do this like jamison
root the whole firmware like this-
forum.xda-developers.com/showthread.php?t=2391367
I haven't this device , so I can't build
use cygwin-ak ! ,how to make odin flashable file.tar , etc etc. (guide) available on xda !
search it !
recovery.img is not working
anabhi said:
https://db.tt/rd2PW94b
here is your insecure boot.img
have fun and press thanks button
instruction inside !
Click to expand...
Click to collapse
Anabhi,
First of all thanks a lot for your time and effort
I have downloaded the file you shared via drop box and made a Odin flash-able .tar file using this:
http://forum.xda-developers.com/showthread.php?t=2281287
Used odin 3.07 file for flashing.
After flashing successful, I tried SRS root/ Universal root/ V-Root to get Root access. (Failed)
I have already installed the root checker basic. It says " Sorry this device does not have proper root access"
Just out of my curiosity what changes you made to the boot.img ?
Came across this generic root method is this what we are doing?
http://whiteboard.ping.se/Android/Rooting
---------- Post added at 10:27 AM ---------- Previous post was at 10:10 AM ----------
wahab96 said:
hey everyone...
I just did an experiment and bricked my phone it now start up and the phone name came up GT-S7262 and on that screen it just stuck and starts vibrateing constantly... the phone don't have any recovery ... but it still goes in download mode....
now i will that what just i did... i downloaded the stock rom from sammobile and replaced that unsecured boot.img with the stock boot.img and tried to flash it with odin but it give some md5 error & then i renamed that file from tar.md5 to just tar and odin starts flashing! but it just got stuck... so i power of my phone and it was bricked...so i just put it back in download mode and flash the stock rom with odin... it was working all fine but after the flashing completed the phone reboots and stuck there... now i don't know what to do... please help me to get my phone back working :'( :'( :'(
Click to expand...
Click to collapse
Dear Wahab96,
Don't worry its normal to brick the phone when testing.
I suggest you to download complete stock firmware (not the kernel alone) from here
Use Odin 3.07 and flash as per the picture shown in here.
Select only PDA and give the path to the firmware.
Odin can only detect .tar.md5 (md5 is the checksum)
The phone will reboot couple of times.. dont panic or pull the usb cable. wait till it says PASS in green color and all threads complete message in the status window.
Once the process is complete the phone will work normally.
Dont forget to hit thanks if I have helped you .....
it's not a recovery.img
it's boot.img (kernal)
I tried to flash CWM made with MTKdroidTools, directly through MTKdroidTools, and it came up (upside down). I then proceeded to select reboot. It just got stuck at a bootloop (also upside down). I did a battery pull after a few minutes, and booted into recovery, which came up with the stock one. I selected wipe emmc (written in chinese, but I have a different phone with the same recovery for reference). Did the wipe, still stuck in bootloop.
Device a is MT6572 Note 4 replica. I have a backup. ADB and Fastboot still work. I can boot into the stock recovery. What should I do?
Jesse72 said:
I tried to flash CWM made with MTKdroidTools, directly through MTKdroidTools, and it came up (upside down). I then proceeded to select reboot. It just got stuck at a bootloop (also upside down). I did a battery pull after a few minutes, and booted into recovery, which came up with the stock one. I selected wipe emmc (written in chinese, but I have a different phone with the same recovery for reference). Did the wipe, still stuck in bootloop.
Device a is MT6572 Note 4 replica. I have a backup. ADB and Fastboot still work. I can boot into the stock recovery. What should I do?
Click to expand...
Click to collapse
So you have a fake note 4 OK
Can you flash a kernel and can you get the boot.IMG
USBhost said:
So you have a fake note 4 OK
Can you flash a kernel and can you get the boot.IMG
Click to expand...
Click to collapse
I'm not sure what you mean about the kernel, can you be more specific?
I have a whole ROM backup, done minutes before I tried to flash the recovery, so I can get the boot.IMG from that
Jesse72 said:
I'm not sure what you mean about the kernel, can you be more specific?
I have a whole ROM backup, done minutes before I tried to flash the recovery, so I can get the boot.IMG from that
Click to expand...
Click to collapse
Then can you just restore that backup?
USBhost said:
Then can you just restore that backup?
Click to expand...
Click to collapse
How do I do that?
Jesse72 said:
How do I do that?
Click to expand...
Click to collapse
How did you even do a full ROM backup
Or you used that tool to do so?
USBhost said:
How did you even do a full ROM backup
Or you used that tool to do so?
Click to expand...
Click to collapse
Did the backup with MTKdroidTools. Its currently on my computer. How can I now restore it to the phone? ADB and fastboot work, but my recovery reverted back to stock?
Sorry for the dumb questions, but this is the first time I've ever created a brick.
Jesse72 said:
Did the backup with MTKdroidTools. Its currently on my computer. How can I now restore it to the phone? ADB and fastboot work, but my recovery reverted back to stock?
Sorry for the dumb questions, but this is the first time I've ever created a brick.
Click to expand...
Click to collapse
NP I was a noob too
What do you mean by adb working
In recovery and or booting up?
If you get adb while the bootloop
Can you do "adb shell mount"
And is your bootloader unlocked
Do you have download mod?
Edit nvm thanks @karandpr
This thread has instructions for backup & restore.
http://forum.xda-developers.com/showthread.php?t=2730031
karandpr said:
This thread has instructions for backup & restore.
http://forum.xda-developers.com/showthread.php?t=2730031
Click to expand...
Click to collapse
Stuck at step 3, won't accept scatter file.
Jesse72 said:
Stuck at step 3, won't accept scatter file.
Click to expand...
Click to collapse
In that case you will need stock firmware ....
I can tell you the procedure but not the solution...
You will need Google and lot of patience ...
First you will need to find phones with specs same(atleast 90% similar) to your phone....
Then you need to download firmwares with the help of Google (there will be a lot)...
Then you need to test them one by one using SP tool...
You will get weird results like touchscreen not working or something...
In case you find the perfect firmware...post in in this thread or make an FAQ ...It will help others ...
karandpr said:
In that case you will need stock firmware ....
I can tell you the procedure but not the solution...
You will need Google and lot of patience ...
First you will need to find phones with specs same(atleast 90% similar) to your phone....
Then you need to download firmwares with the help of Google (there will be a lot)...
Then you need to test them one by one using SP tool...
You will get weird results like touchscreen not working or something...
In case you find the perfect firmware...post in in this thread or make an FAQ ...It will help others ...
Click to expand...
Click to collapse
I have the backup ROM I made, can I just flash it somehow? Its in zip format.
Jesse72 said:
I have the backup ROM I made, can I just flash it somehow? Its in zip format.
Click to expand...
Click to collapse
Make a copy of zip
Open zip and check if there is updater-script ...
If there is then you can flash with recovery. ...
karandpr said:
Make a copy of zip
Open zip and check if there is updater-script ...
If there is then you can flash with recovery. ...
Click to expand...
Click to collapse
Just realised MTKdroidtools is working, so I re-flashed CWM. Putting ROM zip on blank SD card, and will try to flash with CWM.
Am I doing this right?
Jesse72 said:
Just realised MTKdroidtools is working, so I re-flashed CWM. Putting ROM zip on blank SD card, and will try to flash with CWM.
Am I doing this right?
Click to expand...
Click to collapse
I have no hands-on experience with MTK devices.
On normal devices with recoveries , there is a folder Meta-INF and there is updater script and update binary which allows a Zip file o flashed on Android Recoveries (Stock or CWM). Stock recoveries enforce manufacturers signature. Custom recoveries like CWM allow unsigned zips.
Long story short ,check for META-INF folder and check if updater script & updater-binary is present. If not then ,zip won't be flashed with CWM
karandpr said:
I have no hands-on experience with MTK devices.
On normal devices with recoveries , there is a folder Meta-INF and there is updater script and update binary which allows a Zip file o flashed on Android Recoveries (Stock or CWM). Stock recoveries enforce manufacturers signature. Custom recoveries like CWM allow unsigned zips.
Long story short ,check for META-INF folder and check if updater script & updater-binary is present. If not then ,zip won't be flashed with CWM
Click to expand...
Click to collapse
There is no folders in the backup, just individual files. No files called updater script or updater-binary either. And yeah, it didn't flash either. I have 2 backups, one stock ROM, one done today. Both were done with MTKdroidTools, so I expect both to be the same. Any way to get the required files and add them, or do something else to make it flashable?
Jesse72 said:
There is no folders in the backup, just individual files. No files called updater script or updater-binary either. And yeah, it didn't flash either. I have 2 backups, one stock ROM, one done today. Both were done with MTKdroidTools, so I expect both to be the same. Any way to get the required files and add them, or do something else to make it flashable?
Click to expand...
Click to collapse
Try SP tool or it's variant . ..Those backups can only be flashed in SP tool !!
:angel:
It might be possible to extract files if they are not encrypted but it will take a lot of time...
karandpr said:
Try SP tool or it's variant . ..Those backups can only be flashed in SP tool !!
:angel:
It might be possible to extract files if they are not encrypted but it will take a lot of time...
Click to expand...
Click to collapse
SP flashtools isn't working, but I found a guide, which shows how to create a flashable zip from a backup. However it says to get the META-INF folder from a custom ROM for your phone. How specific does this folder need to be? I cant be sure of what my device is completely because it is branded as a note 4, rather than a replica under a brand name.
I can find a MT6572 ROM, but I cant be sure everything would work flawlessly with my phone. Understand what I'm saying?
EDIT: link to article http://www.droidviews.com/create-flashable-zip-cwmtwrp-backup/
Jesse72 said:
SP flashtools isn't working, but I found a guide, which shows how to create a flashable zip from a backup. However it says to get the META-INF folder from a custom ROM for your phone. How specific does this folder need to be? I cant be sure of what my device is completely because it is branded as a note 4, rather than a replica under a brand name.
I can find a MT6572 ROM, but I cant be sure everything would work flawlessly with my phone. Understand what I'm saying?
EDIT: link to article http://www.droidviews.com/create-flashable-zip-cwmtwrp-backup/
Click to expand...
Click to collapse
The binary is generic .The updater script needs to be specific. Special permissions are assigned to files using the script which can make or break the device. You will need a ROM very close to your device for Meta INF.
The article you have listed is for CWM backup which is different from MTK tools backup.
You will need to get SP tools working to get your device working...or search for a working backup for your device.
karandpr said:
The binary is generic .The updater script needs to be specific. Special permissions are assigned to files using the script which can make or break the device. You will need a ROM very close to your device for Meta INF.
The article you have listed is for CWM backup which is different from MTK tools backup.
You will need to get SP tools working to get your device working...or search for a working backup for your device.
Click to expand...
Click to collapse
I'm confused with what you want me to do with SP flash tools. Can you please explain?
I bought the Samsung J3 Pro from China and it doesn't come with Gapps.
The phone is not rooted and the bootloader is locked.
Here are the steps I took to resolve this and install Gapps, but my stock recovery cannot access external SD card and ADB push. But at least I can use GAPPS.
1. Unlocking Bootloader - You need to CROM to unlock the bootloader. Install this apk.
h double t p s: double-slashes 1drv.ms/u/s!AgNcMhBajz7DiS4U-ssG4pig6VYE
2. Install Root - Use ODIN （h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTE3Lp1mHOJnAr-r)
and flash this root file under AP (h double t p s: double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTCam_wn2LVf6X8C)
3. Install Super User - If you get boot up after flashing the root access, you are almost done. Install the Superuser.apk . (h double t p s : double-slashes 1drv.ms/u/s!AgNcMhBajz7DiS-44wy4I0c6UD4e)
4. Install GAPPS - As I can't flash gapps.zip using the OpenGapss due to no access to external SD Card using the stock recovery (no CWM or TWRP for this model) , I use this app from this website (h double t p :double-slashes world wide web.gugeanzhuangqi.com/)
or download apk here (h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTKheRRLQoimhO3a)
I apologise for inconvenient links as this is my first post . I hope the above can help someone ... but I still need some help to enable access to external SD card under the stock recovery, or wait for a proper CWM or TWRP recovery...:good:
h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTE3Lp1mHOJnAr-r
help !!! Link dead
Link died
Very Thank you!! I insatlled gapps successfully. very thank you.
Keen to try this, I've done the same "mistake" buying the Chinese model. Can I also get rid of the whole chinese rom altogether and get a european or custom one? And...how?
kpnagidi said:
Keen to try this, I've done the same "mistake" buying the Chinese model. Can I also get rid of the whole chinese rom altogether and get a european or custom one? And...how?
Click to expand...
Click to collapse
Just a heads up, I managed to root using ODIN and installed TWRP and have access to external files during recovery. I then installed GAPPS, but still got "Google Framework has stopped working" when trying to sign into Google Play. I'll let you know if I have any more success.
Hello,
Someone could help me to root my sm-j3110 of china please :crying: ?
Because the links above no longer work and I don't see anywhere a clean solution for root this model.
The solution above still works or a new solution is released please ?
Thanks a lot in advance
MobAndro said:
Hello,
Someone could help me to root my sm-j3110 of china please :crying: ?
Because the links above no longer work and I don't see anywhere a clean solution for root this model.
The solution above still works or a new solution is released please ?
Thanks a lot in advance
Click to expand...
Click to collapse
Yeah I figured it out in the other day, I'll try to gather the files you'll need and post them in a link. Just a note, the original solution mentioned in the first post didn't work for me.
Phalanxguard said:
Yeah I figured it out in the other day, I'll try to gather the files you'll need and post them in a link. Just a note, the original solution mentioned in the first post didn't work for me.
Click to expand...
Click to collapse
Nice and thank you
I have 3 questions please :
- a yellow triangle appears with a red and yellow message ?
- KNOX counter 0x1 ?
- OEM unlock to enable ?
It's only to know, anyway I can't live without root on all my Android products :laugh:
MobAndro said:
Nice and thank you
I have 3 questions please :
- a yellow triangle appears with a red and yellow message ?
- KNOX counter 0x1 ?
- OEM unlock to enable ?
It's only to know, anyway I can't live without root on all my Android products :laugh:
Click to expand...
Click to collapse
Yes a yellow triangle appears on the boot screen. I flashed TWRP, wiped the original ROM and installed a new one that comes with google play by default, google GPS services enabled and has the Chinese bloatware removed, didn't even need the phone rooted. I did however manage to root the phone before, although I can't remember the software I used. I left it unrooted in the end, just because I was happy enough with the system without.
Phalanxguard said:
Yes a yellow triangle appears on the boot screen. I flashed TWRP, wiped the original ROM and installed a new one that comes with google play by default, google GPS services enabled and has the Chinese bloatware removed, didn't even need the phone rooted. I did however manage to root the phone before, although I can't remember the software I used. I left it unrooted in the end, just because I was happy enough with the system without. I'm uploading the files to Mega now, but it's going to take a little while.
Click to expand...
Click to collapse
Thank for your answer.
Required files:
https://mega.nz/#!44QHhTpB!x2EVqIE4ZSZO1p_FYmqRCAxEr7j29gk3zYQF41kC4x0
Firstly, I'm going to assume you know how to boot your phone into download mode and that you know how to use ODIN. If not, watch a youtube video, it's fairly simple stuff.
You'll need a decent size of SD card to back up to. I think the original ROM itself is >4GB.
Steps:
1. Flash TWRP using ODIN.
2. BACK UP YOUR FILES (Including system files) USING TWRP TO YOUR SD.
3. Wipe everything except your external SD using TWRP.
4. Flash the new ROM using ODIN, there are four files, one for each section in ODIN.
5. (Optional) Reflash TWRP as the installation of the ROM removes it.
As always, I can't stress enough how important it is to back up beforehand, you are wiping everything that's not on your external SD.
Also note that you have to wipe the old ROM, it doesn't work if you just try to install the new one on top of the old one.
I found the default English keyboard in this ROM had a few mistakes (It's originally a Vietnamese ROM I believe, although it has an English language option), so I downloaded google keyboard from play and that fixed it.
Enjoy
Phalanxguard said:
Required files:
https://mega.nz/#!44QHhTpB!x2EVqIE4ZSZO1p_FYmqRCAxEr7j29gk3zYQF41kC4x0
Firstly, I'm going to assume you know how to boot your phone into download mode and that you know how to use ODIN. If not, watch a youtube video, it's fairly simple stuff.
You'll need a decent size of SD card to back up to. I think the original ROM itself is >4GB.
Steps:
1. Flash TWRP using ODIN.
2. BACK UP YOUR FILES (Including system files) USING TWRP TO YOUR SD.
3. Wipe everything except your external SD using TWRP.
4. Flash the new ROM using ODIN, there are four files, one for each section in ODIN.
5. (Optional) Reflash TWRP as the installation of the ROM removes it.
As always, I can't stress enough how important it is to back up beforehand, you are wiping everything that's not on your external SD.
Also note that you have to wipe the old ROM, it doesn't work if you just try to install the new one on top of the old one.
I found the default English keyboard in this ROM had a few mistakes (It's originally a Vietnamese ROM I believe, although it has an English language option), so I downloaded google keyboard from play and that fixed it.
Enjoy
Click to expand...
Click to collapse
Finally, I flashed TWRP using ODIN first.
Then I flashed SuperSU-v2.79-201612051815.zip using TWRP and installed SuperSU v2.79 after boot on my ROM original of China.
The root works fine but the GPS no longer works and it makes me angry
I used many gps fix and gps test without results :crying::crying::crying:
I'm french so I was afraid that the Vietnamese ROM don't have the French language
Maybe I'll buy a new model to see if root works without problems because I don't know if others have rooted the Chinese ROM Stock perfectly.
I so liked this phone :crying:
Very thanks a lots for your help :good:
MobAndro said:
Finally, I flashed TWRP using ODIN first.
Then I flashed SuperSU-v2.79-201612051815.zip using TWRP and installed SuperSU v2.79 after boot on my ROM original of China.
The root works fine but the GPS no longer works and it makes me angry
I used many gps fix and gps test without results :crying::crying::crying:
I'm french so I was afraid that the Vietnamese ROM don't have the French language
Maybe I'll buy a new model to see if root works without problems because I don't know if others have rooted the Chinese ROM Stock perfectly.
I so liked this phone :crying:
Very thanks a lots for your help :good:
Click to expand...
Click to collapse
No problem. Just so you know, it has all of the major languages. French, Italian etc. I scrolled past them when I was searching for the English option.
Phalanxguard said:
No problem. Just so you know, it has all of the major languages. French, Italian etc. I scrolled past them when I was searching for the English option.
Click to expand...
Click to collapse
OK
sethanon55 said:
I bought the Samsung J3 Pro from China and it doesn't come with Gapps.
The phone is not rooted and the bootloader is locked.
Here are the steps I took to resolve this and install Gapps, but my stock recovery cannot access external SD card and ADB push. But at least I can use GAPPS.
1. Unlocking Bootloader - You need to CROM to unlock the bootloader. Install this apk.
h double t p s: double-slashes 1drv.ms/u/s!AgNcMhBajz7DiS4U-ssG4pig6VYE
2. Install Root - Use ODIN （h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTE3Lp1mHOJnAr-r)
and flash this root file under AP (h double t p s: double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTCam_wn2LVf6X8C)
3. Install Super User - If you get boot up after flashing the root access, you are almost done. Install the Superuser.apk . (h double t p s : double-slashes 1drv.ms/u/s!AgNcMhBajz7DiS-44wy4I0c6UD4e)
4. Install GAPPS - As I can't flash gapps.zip using the OpenGapss due to no access to external SD Card using the stock recovery (no CWM or TWRP for this model) , I use this app from this website (h double t p :double-slashes world wide web.gugeanzhuangqi.com/)
or download apk here (h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTKheRRLQoimhO3a)
I apologise for inconvenient links as this is my first post . I hope the above can help someone ... but I still need some help to enable access to external SD card under the stock recovery, or wait for a proper CWM or TWRP recovery...:good:
Click to expand...
Click to collapse
Hi,brother,would you mind tell me how to create the flashable custom root file , which mentioned in your post? i have ever tried many times , to create a custom flashable boot.img, like what you done, but failed to flash it to my SM-j3110 via Odin, i suspect something wrong with the space address of the image file...
Appreciate if you can share with me how to make the flashable custom boot image !! Thanks in advance
JevonsDU said:
Hi,brother,would you mind tell me how to create the flashable custom root file , which mentioned in your post? i have ever tried many times , to create a custom flashable boot.img, like what you done, but failed to flash it to my SM-j3110 via Odin, i suspect something wrong with the space address of the image file...
Appreciate if you can share with me how to make the flashable custom boot image !! Thanks in advance
Click to expand...
Click to collapse
I'm sorry, I do not understand what you meant by creating a flashable custom root file. I just used the steps below to enable root so that I can install GAPPS using the 3rd party installer :
1. Unlock bootloader
2. Install the rooted ROM (check only the box "AP" in ODIN)
3. install Superuser
4. Install the apk for GAPPS installation.
You need to follow the sequence.
patonline85 said:
h double t p s :double-slashes 1drv.ms/u/s!AgNcMhBajz7DiTE3Lp1mHOJnAr-r
help !!! Link dead
Click to expand...
Click to collapse
tested the link and its still working.
Anyway here is the link to the folder :
https://onedrive.live.com/?authkey=!ADcunWYc4mcCv6s&id=C33E8F5A10325C03!1196&cid=C33E8F5A10325C03
Phalanxguard said:
Just a heads up, I managed to root using ODIN and installed TWRP and have access to external files during recovery. I then installed GAPPS, but still got "Google Framework has stopped working" when trying to sign into Google Play. I'll let you know if I have any more success.
Click to expand...
Click to collapse
Hi , you managed to find a TWRP recovery for this phone model ?
MobAndro said:
Finally, I flashed TWRP using ODIN first.
Then I flashed SuperSU-v2.79-201612051815.zip using TWRP and installed SuperSU v2.79 after boot on my ROM original of China.
The root works fine but the GPS no longer works and it makes me angry
I used many gps fix and gps test without results :crying::crying::crying:
I'm french so I was afraid that the Vietnamese ROM don't have the French language
Maybe I'll buy a new model to see if root works without problems because I don't know if others have rooted the Chinese ROM Stock perfectly.
I so liked this phone :crying:
Very thanks a lots for your help :good:
Click to expand...
Click to collapse
My GPS is working fine using the steps I had posted.
Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.
broderp said:
Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.
Click to expand...
Click to collapse
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
ebonit said:
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
Thanks. As simple as the process was, as a noob (first time attempting this) I was really concerned about screwing this up and bricking my tablet.
The one you linked to was one of the ones I was considering and hence my question regarding what works with what I have already done. The noob mind (mine anyways) finds a dozen questions at every turn. In this case I would ask the following:
Q-Do I have to use Kang TWRP?
Q-How is it different than the TWRP I used on my Tablet?
Q-Will I need to constantly change TWRP versions depending on what ROM I want to use?
Q-Is there a danger to switching TWRPs?
Q-Doesn't flashing SuperSU after I flash Gapps overright and erase SuperSU or is there some unique way to flash (push?) both at the same time?
Q-Many more I'm sure!
To the noob, almost all the instructions I read appear to be written for someone who as done this many times. The level of detail needed for the novice is just not there or lost between the jargon used, with many steps not fleshed out because the author assumes a certain level of expertise.
I will definitely read these threads as best I can, but in the interim, is there any ROM that are known to be able to be flashed via the TWRP I currently have? The author of the version I used certainly made it seem like it was that simple, load the ROM/ zip file onto the MicroSD card and when in Custom recovery simply use the INSTALL feature to navigate to the file and press a button to flash and ..."BAM!!" you are running a new ROM.
ebonit said:
...
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
broderp said:
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.
broderp said:
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.
ebonit said:
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.
Click to expand...
Click to collapse
Sorry, bad choice of words on my part. By dead I meant that the thread was closed and I'm concerned getting answers would be harder as the OP was no longer actively looking there for questions.
ebonit said:
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.
Click to expand...
Click to collapse
Ok, so if I read your comment correctly, I can copy the .img file to an SD card, boot into recovery and flash it from there OR I can fire up fastboot and the same steps I originally did to install custom recovery from my PC to accomplish the same thing... either way I should still have custom recovery, but with the KANG version. Right?
THANKS TO BOTH OF YOU FOR RESPONDING TO MY PREVIOUS POST. I appreciate the support.
Oh no....
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
EDIT: After I cleaned my pants, I used abd and fastboot to flash the original Blob file using my PC. This restored the custom recovery. I was freaking out for a few minutes.
I didn't change the file name of the kang .img file. Should I have done something different?
EDIT: Successful recovery to Kang2.8.7.2 !! :good::good: I used adb and my PC to send the .img file (renamed "twrpkang.img" for simplicity) and it worked great. I'm a pro..:silly:
broderp said:
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
Click to expand...
Click to collapse
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."
ebonit said:
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."
Click to expand...
Click to collapse
Not sure what I did wrong. I tried to do it within the old recovery menu and it hosed it. It found the file and mounted it successfully, but it seemed weird to be within the partition I was overwriting and writing to it. Kind of like you cant install windows while your using Windows...
The new version is much smoother.... Thanks, not to learn about this gapps super SU and how to flash all of these and in what order along with the ROM..as well as this wipe vs format thing...so confusing...