Hi guys. i've been searching and trying to solve this problem for the past two weeks. can't fcking deal with it anymore. $20 for anyone that can help me , PLEASE!
p5110 here. had cm10.1 working for more than 1 year. when i updated to cm.10.3-rc2 , problems appeared.
Tried flashing stock firmware via odin. Says successfull but still in cm10.3 after reboot. boots up , however, it reboots after 1-3 mins.
tried flashing different roms, error.
Please, how can i revert back to stock or any working state ???
thanks,
alex
Anyone ?!
Try installing Clockworkmod (newest version) and then flash the stock firmware with that. Be sure to clear cache and dalvik cache first, and also factory reset (all through clockwork mod)
Latest official CWM won't help as it's to old for anything (stopped at 6.0.2.7 if i am not wrong), better use latest TWRP.
But: it sounds like your emmc got read only because it reached end of lifetime.
Indicator for that:
- flashing a different recovery via Odin doesn't change the recovery - it still boots the old.
- factory reset inside recovery doesn't change anything
Only way i know to get back write access would be to update the emmc firmware via JTAG. If there's no one with a JTAG near your place, replacing the emmc will be the solution.
GT-P5110 16 GB or 32 GB?
What recovery (also recovery version) are you using?
Using a custom kernel?
Related
Helllo..
First i download and flashed a rom named MoonROM via ClockworkMod over the i9001XXKQB sofware. now i have reflashed the old XXKQB back (warranty reasons), and i have lost 3G connection and i am left with the all the sounds from the MoonRom v 4.0 rom
I have:
- Reflashed a billion times (via Odin MultiDownload v4.43 with the areisVE.ops ) - Pass every time..
- done a full reset many times (using the *2767*3855 factory reset)
- formated data and system via ClockWorkMod Recovery
Still this happens. i have even reflashed the stock rom (xxkpu) but still ive lost the 3g connection and the MoonRom sounds is still there..
Th thing is that every custom rom i install, and when i recover to stock using odin, the old rom is still left, if you get it. what should i do??
I dont know where to post this so......
If nothing works, then.....
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.
forgot to mention on the recovery 3e sceen at the bottom it says
installing package
E:failed to mount /system (invalid arguement)
E:main :: can't mount /systemE:failed to mount /system (invalid arguement)
what does this mean?
sinuuar said:
forgot to mention on the recovery 3e sceen at the bottom it says
installing package
E:failed to mount /system (invalid arguement)
E:main :: can't mount /systemE:failed to mount /system (invalid arguement)
what does this mean?
Click to expand...
Click to collapse
If you still have CWM as your recovery, then your attempts to flash stock ROM with ODIN failed.
Did you get an error?
What happens when you try to flash stock ROMs?
Have you tried Flashing the Stock ICS Rom with Odin?
sinuuar said:
hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.
Click to expand...
Click to collapse
Ur tab hardbrick and if u pro, then u can solve it using EMMC BRICK BUG GUIDE from ur post..like mine, im having that problem before..so what i do, i take my tab to service centre, and they change my MOTHERBOARD bcoz my MB faulty....lucky mine still under warranty..but u need to bluffing to them, not to tell them u root ur tab...
...~...~...~...~...~...~...~...~...~...~...~...~...~...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium
---------- Post added at 04:10 AM ---------- Previous post was at 04:07 AM ----------
After this, put this advice in ur mind...IF U ON ICS, DO NOT WIPE DATA OR CLEAR CACHE USING 3eRECOVERY OR TEMPORARY RECOVERY...but u safe if u using permenant CWM...chill
...~...~...~...~...~...~...~...~...~...~...~...~...~...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium
sinuuar said:
hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.
Click to expand...
Click to collapse
you made your life harder than it should have, to unroot, just install SuperSU, and use its "Full Unroot" function. Don't forget to uninstall Superuser. Note that for next time.
Have you tried flashing to any ICS stock rom through Odin/Heimdall? If you did, which one did you use? If not, you could try flashing this one from this thread http://forum.xda-developers.com/showthread.php?t=1777303 first and see how it goes.
the iniaouse
sorry i had to edit my links, not enough post count to enable outside links.....
i tried to odin stock hc from the gt6210 root guide and on reboot i got errors, see the HC pic attachment
couldn't get the stock recovery, so i flashed cwm 6.0.1.9 and no matter how many
tries or button pushes i couldn't get in the recovery screen (battery symbol flicker for a sec)
Am i flashing incorrectly? i load up the files under PDA.
i then tried flashing GT_P6210_ICS_Latest_Leak_Odin_Package.zip from the same root guide.
and got more errors see "ics reboot"attachment
i popped the cwm.zip file (temporary CWM as described in the root guide)
cwm temp pic
i ran the 120824-151927-emmc_find_brick_start.zip thru this twice and it finished its
scan and came back to the menu.
i found a another version on cwm that can be installed by sdcard
now only then under ics and this version of cwm can i use the vol+ and power to get into recovery.
ran the brick start file here as well same thing ran thru then came back to the menu.
i'm rereading the EMMC guide again since i don't feel out of wack like the last couple of days
****update, i figure i'd flash ics and cwm 6.0.1.9 again and it finally let me get into the menu, now running the EMMC start
if you can successfully flash stock ICS (just flash it and NOT the CWM first) and it boots. , Then you don't have EMMC bug issues. Otherwise it would fail.
DigitalMD said:
if you can successfully flash stock ICS (just flash it and NOT the CWM first) and it boots. , Then you don't have EMMC bug issues. Otherwise it would fail.
Click to expand...
Click to collapse
If I use Odin to flash stock HC or ICS it always says successful, on reboot that's when I get errors like in the attachment in my last post. eMMC files (start and end) they scan everything then says completed. It never froze at all.
If its not the bug what is it that gives those errors? Those stock files are from the gt6210 root guide and have used before.
So am I not flash correctly on Odin?
sinuuar said:
If I use Odin to flash stock HC or ICS it always says successful, on reboot that's when I get errors like in the attachment in my last post. eMMC files (start and end) they scan everything then says completed. It never froze at all.
If its not the bug what is it that gives those errors? Those stock files are from the gt6210 root guide and have used before.
So am I not flash correctly on Odin?
Click to expand...
Click to collapse
I still don;t understand what error you are getting.?
If you flash the stock rom in odin and nothing else, what happens?
IF you flash only the stock rom in ODIN and you still see what you show on the pictures when it boots, you have a corrupt update file on your SD card. Remove the SD card
Hi people I'm hoping someone can help I'm wanting to upgrade from my stock ICS to JB in hope of making use of the lower audio latency in CM10 (JB). But its all gone terribly wrong...
I must of done something stupid because I keep getting stuck at "Installing update" in CWM 5.5.0.4. I've tried many different CWM versions too.
First I did a factory reset, then wipe cache etc.
Is there any way to flash CM10 using Odin?
What else could I try? I can still flash any recoveries via Odin, and I can boot into CWM no problem.
I used this guide and revived my tablet:
http://forum.xda-developers.com/showthread.php?t=1862294
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
anoopgkris said:
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
Click to expand...
Click to collapse
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Will try this
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
Thanks, will try this tonight
I already took the Nandroid backup before flashing CM10 Beta 4. But was not able to go into it after my phone was soft-bricked.
Solved - booted into 2.3.6 !!!
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
A million thanks!! It somehow started now into the 2.3.6.
Flashing the recovery-clockwork-5.5.0.4-ariesve.tar.md5 did not solve the bootloop. Then i flashed the Boot_loader.tar. That too did not solve the bootloop. Tried Recovery mode again but the SAMSUNG logo kept coming and going until i released my fingers after a full two minutes. Then before the android-out-of-the-box icon came it went straightaway into Recovery .
Wiped Data and Cache and rebooted. After a very very long time it started and asked if im okay with the Google data collection policy asked in Polish language.
Wow, going to update to 4.1.2 Release 2.5 in some time.
Thanks again man. :good:
Got CM10 Beta 4 again !
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
anoopgkris said:
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
Click to expand...
Click to collapse
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
[SOLVED] Bootloop problem after soft-brick
parkourkarthik said:
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
Click to expand...
Click to collapse
Sure, thanks !!
Also pasting here an easter egg that i saw after loading Gingerbread 2.3.6 before this CM10.
Putting this because i tried this for the first time in GB (the seven times click on android version)