[Q] stuck, now what? looking for help/ideas - Samsung Galaxy Tab Plus

hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.

forgot to mention on the recovery 3e sceen at the bottom it says
installing package
E:failed to mount /system (invalid arguement)
E:main :: can't mount /systemE:failed to mount /system (invalid arguement)
what does this mean?

sinuuar said:
forgot to mention on the recovery 3e sceen at the bottom it says
installing package
E:failed to mount /system (invalid arguement)
E:main :: can't mount /systemE:failed to mount /system (invalid arguement)
what does this mean?
Click to expand...
Click to collapse
If you still have CWM as your recovery, then your attempts to flash stock ROM with ODIN failed.
Did you get an error?
What happens when you try to flash stock ROMs?
Have you tried Flashing the Stock ICS Rom with Odin?

sinuuar said:
hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.
Click to expand...
Click to collapse
Ur tab hardbrick and if u pro, then u can solve it using EMMC BRICK BUG GUIDE from ur post..like mine, im having that problem before..so what i do, i take my tab to service centre, and they change my MOTHERBOARD bcoz my MB faulty....lucky mine still under warranty..but u need to bluffing to them, not to tell them u root ur tab...
...~...~...~...~...~...~...~...~...~...~...~...~...~...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium
---------- Post added at 04:10 AM ---------- Previous post was at 04:07 AM ----------
After this, put this advice in ur mind...IF U ON ICS, DO NOT WIPE DATA OR CLEAR CACHE USING 3eRECOVERY OR TEMPORARY RECOVERY...but u safe if u using permenant CWM...chill
...~...~...~...~...~...~...~...~...~...~...~...~...~...
Xperia X8
Xperia Mini Pro
Xperia Neo
Galaxy W
Xperia Play
Xperia U
Galaxy SII G
Galaxy Tab 7 Plus
Sent from my GT-P6200 using XDA Premium

sinuuar said:
hello, let me explain what i did and maybe theres a solution one you pros can help with.....
gt6210
So one day i decided to root and eventually backup everything. So i went directly to this guide but didn't install the pernament cwm thru odin like the guide said.
I decided i didnt need root, and rather not have it on my tab and not knowing how to remove i decide just to flash back to stock HC the update
to ICS thru kies like i did before. so it just sat there in a endless boot loop for 30 mins going thru the samsung animation. so i figured i would
wipe cache and do a factory reset.
Now its locked at the samsung logo, flashed back to stock HC, same thing stuck, only download mode available wont go into recovery,
flash to leaked ICS that was in the guide above still stuck but i got the recovery 3e screen.
So i figured i just bricked it thru the EMMC bug when i reset/wiped thru the stock recovery.....
i went to this EMMC fix guide and from the recovery 3e i ran cwm.zip that was in the
root guide and ran emmc_find_brick_start.zip it scanned and never stopped just came back to cwm screen.
what next? ive been flashing different pit file, going back to hc and ics etc.........
i dont want to sound like a tool, although i feel like one ATM i really need my tablet. I'm on dialysis right now waiting
for a kidney transplant and i spend a lot of time at the hospital surfing on this thing and i can't afford to buy a new one
since i'm disability.
any ideas/suggestions? throw them on here, ill try anything.
Click to expand...
Click to collapse
you made your life harder than it should have, to unroot, just install SuperSU, and use its "Full Unroot" function. Don't forget to uninstall Superuser. Note that for next time.
Have you tried flashing to any ICS stock rom through Odin/Heimdall? If you did, which one did you use? If not, you could try flashing this one from this thread http://forum.xda-developers.com/showthread.php?t=1777303 first and see how it goes.

the iniaouse
sorry i had to edit my links, not enough post count to enable outside links.....
i tried to odin stock hc from the gt6210 root guide and on reboot i got errors, see the HC pic attachment
couldn't get the stock recovery, so i flashed cwm 6.0.1.9 and no matter how many
tries or button pushes i couldn't get in the recovery screen (battery symbol flicker for a sec)
Am i flashing incorrectly? i load up the files under PDA.
i then tried flashing GT_P6210_ICS_Latest_Leak_Odin_Package.zip from the same root guide.
and got more errors see "ics reboot"attachment
i popped the cwm.zip file (temporary CWM as described in the root guide)
cwm temp pic
i ran the 120824-151927-emmc_find_brick_start.zip thru this twice and it finished its
scan and came back to the menu.
i found a another version on cwm that can be installed by sdcard
now only then under ics and this version of cwm can i use the vol+ and power to get into recovery.
ran the brick start file here as well same thing ran thru then came back to the menu.
i'm rereading the EMMC guide again since i don't feel out of wack like the last couple of days
****update, i figure i'd flash ics and cwm 6.0.1.9 again and it finally let me get into the menu, now running the EMMC start

if you can successfully flash stock ICS (just flash it and NOT the CWM first) and it boots. , Then you don't have EMMC bug issues. Otherwise it would fail.

DigitalMD said:
if you can successfully flash stock ICS (just flash it and NOT the CWM first) and it boots. , Then you don't have EMMC bug issues. Otherwise it would fail.
Click to expand...
Click to collapse
If I use Odin to flash stock HC or ICS it always says successful, on reboot that's when I get errors like in the attachment in my last post. eMMC files (start and end) they scan everything then says completed. It never froze at all.
If its not the bug what is it that gives those errors? Those stock files are from the gt6210 root guide and have used before.
So am I not flash correctly on Odin?

sinuuar said:
If I use Odin to flash stock HC or ICS it always says successful, on reboot that's when I get errors like in the attachment in my last post. eMMC files (start and end) they scan everything then says completed. It never froze at all.
If its not the bug what is it that gives those errors? Those stock files are from the gt6210 root guide and have used before.
So am I not flash correctly on Odin?
Click to expand...
Click to collapse
I still don;t understand what error you are getting.?
If you flash the stock rom in odin and nothing else, what happens?
IF you flash only the stock rom in ODIN and you still see what you show on the pictures when it boots, you have a corrupt update file on your SD card. Remove the SD card

Related

Need serious help immediately

I tried to flash a aokp rom and before flashing made a back up. Now when I flashed the rom and rebooted the phone im stuck at samsung boot. I can get into recovery. At first it was a messed up recovery i tried to get to an old rom and reinstalled inimitable on reboot still stuck at samsung but can get into red recovery. Backup when reinstalling says cant mount system/! please help me asap I cant do anything I need my phone I am in panic mode.
Have tried reflashing The ROM again...or if you just want to go back to stock see my signature for links to the one click method
...btw your in the wrong section to post this...
The OP for aokp does state to flash twice...did you?...first time with wipes, then you can pull battery ...go back to cwm and reflash...again.
going back to stock is your way. clear all that crap out
http://forum.xda-developers.com/showthread.php?t=1524081
Post one to stock.....
Post two to put cwm back on....
Read with detail...the thread I provided....
Your probably going to need to go back to stock, but just so you know, flashing any ICS rom while on Gingerbread bootloaders will get you a "Messed up recovery" You'd have to flash ICS bootloaders, but doing that means you can't flash any non ICS roms, I personally still have a rainbowed recovery on the off chance I want to flash GB rom.
soulysephiroth said:
Your probably going to need to go back to stock, but just so you know, flashing any ICS rom while on Gingerbread bootloaders will get you a "Messed up recovery" You'd have to flash ICS bootloaders, but doing that means you can't flash any non ICS roms, I personally still have a rainbowed recovery on the off chance I want to flash GB rom.
Click to expand...
Click to collapse
We have no ics boot loaders...froyo boot loaders make the recovery look funky...gingerbread boot loaders fix that problem and can be used with froyo, gingerbread and ics ...not trying to be rude or a jerk just informing you
Sent from my SGH-I997 using XDA
Actually the "messed up" or rainbow recovery is from the lack of gingerbread boot loaders, just figured this out this morning when I attempted to flash aokp uniporn. Once I did the heimdall one click with bootloaders checked (gingerbread boot loaders) I was able to successfully flash the aokp rom and recovery works perfectly. Its really better not to reply when one does not know what they are talking about oh and I was still able to reflash a gingerbread rom as well although I probably won't go back to gingerbread again since aokp is the **** and runs super smooth
Sent from my SGH-I997 using xda premium
Please move this thread from the Development Section.
edit- Thanks for moving it.
Sorry about posting so quickly in wrong section. I just know the guys who post in here are pros. I used heimdall and everything is back to stock, no superuser. Should that be right, am I now not rooted? I havent tried to boot into recovery, but I think I have it still. Can I just follow root methods if I want to go back to root? Thanks again.
I my experiences, I've noticed our phones use a form of "Cumulative" Upgrade system, where You have to essentially go from Froyo to GB to ICS or things go haywire when you actually start using your ICS Rom..
I've tried using Heimdall to flash back to stock, but it doesn't seem to fix all my files from time to time, so I still use GTGs Ultimate Unbrick, and once it starts up as you're in Recovery Mode do a Factory Reset/Wipe Cache Partitions, it helps with not having the "Google Authentication Failed".
It's a long process from start to finish either way, so i figure save yourself the hassle for the long run and wipe it fresh...
I used heimdall without clicking the GB bootloaders checkbox. Upon reboot after sucessfully flashing everything, my phone shows the rainbow color thing then boots normally. I have no seen any issues other than that, however I only got it back up and running about an hour ago. I will see as the day progresses what happens. I just would like to know where I go from here to reacquire root priveleges. When I try to boot into recovery with the button combo I get a rainbow colored screen and nothing else showing, should I re-run heimdall with gb bootloaders box checked?
IME, one flash will lock on Samsung logo, 3 finger back to recovery, wipe everything, flash the rom again and flash the gapps and it would have been fine...
I have that happen everytime I have flashed an AOKP ics..it always works out fine..
Those instructions are in most of the OP's...
Its very important to read that and have an understanding of what exact steps there are before you just start flashing away...
drnecropolis said:
IME, one flash will lock on Samsung logo, 3 finger back to recovery, wipe everything, flash the rom again and flash the gapps and it would have been fine...
I have that happen everytime I have flashed an AOKP ics..it always works out fine..
Those instructions are in most of the OP's...
Its very important to read that and have an understanding of what exact steps there are before you just start flashing away...
Click to expand...
Click to collapse
Upon flashing the first time i did reboot into recovery but it was so buggy i couldnt see what to select. I am back to non rooted stock i believe now but when trying to get to recovery it just hangs on a rainbow like screen.
Sent from my SAMSUNG-SGH-I997 using XDA
Cjohns8792 said:
Upon flashing the first time i did reboot into recovery but it was so buggy i couldnt see what to select. I am back to non rooted stock i believe now but when trying to get to recovery it just hangs on a rainbow like screen.
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
I would use the one click heimell run it twice on the 2nd time check the box for bootloaders....
bigjoe2675 said:
I would use the one click heimell run it twice on the 2nd time check the box for bootloaders....
Click to expand...
Click to collapse
It actually doesnt allow me to select it. The box is "greyed" out yet says phone connected and ready.
Cjohns8792 said:
It actually doesnt allow me to select it. The box is "greyed" out yet says phone connected and ready.
Click to expand...
Click to collapse
Aft your 1st flash...dont close program...but put your phone back into download mode again and then it should allow you to check the box...then..
You probably can't mount until you format system, data, and cache. I had this issue before as well, Go to mounts and storage and Format system, data, and cache and then try mounting again.
Axiomkid said:
You probably can't mount until you format system, data, and cache. I had this issue before as well, Go to mounts and storage and Format system, data, and cache and then try mounting again.
Click to expand...
Click to collapse
Can't access recovery, it just shows a full rainbow screen.
Cjohns8792 said:
Can't access recovery, it just shows a full rainbow screen.
Click to expand...
Click to collapse
my suggestion is do the method i mentioned..

Soft Brick CM9 bootloop- CWM 5.8.4.3 semifail

Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727

I had root on GB, followed the new directions of gettting root on ICS, having a probl

Ok sorry if this has been coverd but Iv been looking and I cant find anything. I followed one of directions on how to root the phone again and went into odin and tried flashing the cwm recovery but when I click it, it comes back FAIL, then its stuck and wont let me do anything, Then I have to go into odin again and reflash my firmware cause it bricks the phone. What can I be doing wrong or is it because there stuff on the phone still from my present root when I had GB
geterdone18 said:
Ok sorry if this has been coverd but Iv been looking and I cant find anything. I followed one of directions on how to root the phone again and went into odin and tried flashing the cwm recovery but when I click it, it comes back FAIL, then its stuck and wont let me do anything, Then I have to go into odin again and reflash my firmware cause it bricks the phone. What can I be doing wrong or is it because there stuff on the phone still from my present root when I had GB
Click to expand...
Click to collapse
Post this in Q&A
Just trying to save you some abuse
thankyou but Im trying to delete it but wont let me for some reason
I would double check that the file downloaded correctly... And make sure you are mounting the file in pda when using Oden
Sent from my SAMSUNG-SGH-I727R running SKY-ICS 4.2F3-7
Lil troll. Lol
Try this bro
Flash phone with CWM use this one
Clockworkmod Touch 5.8.1.3 Odin tar http://forum.xda-developers.com/show....php?t=1566613
Then wipe data/factory reset, format- system, data and cache, and clear the partition and dalvik caches, do that to all of them 3 times each, using touch cwm.
Then odin ICS download it from here http://www.sammobile.com/firmware/
(make sure only Auto Reboot is checked nothing else)
Once the phone loads go through the setup then leave it alone, let it sit for about 20min then flash back the CWM. Then download Superuser from here and put it on the root of your SD card then flash it in CWM if it fails just keep doing it until it works, it worked the second time for me.
Once superuser is installed install busybox from the market and everything will work.
This method worked perfect for me. The key is to wait about 20min after you flashed ICS before you do anything else.
Hope this helps you.

Twrp boot loop

This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
lonoguge said:
This happened before but I can't remember how I fixed it.
1. Flashed TWRP (over codename if that helps)
Click to expand...
Click to collapse
Where did you get twrp?
lonoguge said:
2. it bootlooped back to recovery instead of starting the system
3. tried flashing another rom/ didn't work
Click to expand...
Click to collapse
What is "another rom"?
lonoguge said:
4. finished season 2 of the walking dead
5. reflashed TWRP didn't help (TWRP flashing failed even tho it was the same file I used to get TWRP in the first place)
6. Took the battery out but that didn't help either
I really don't want to odin or use one click any ideas??
Click to expand...
Click to collapse
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
bhundven said:
Where did you get twrp?
What is "another rom"?
Meh, lets start with the first two...
To stop the reboot to recovery, you must flash eollie's oneclick with bootloaders (so flash it twice, second time flash bootloaders) and go back to mtd.
Click to expand...
Click to collapse
I got it from what I thought was the official XDA TWRP thread but I'm not sure if it was official or not
at first I tried reinstalling codename but now I'm trying Beam (Tuk edition) and it seems to be working
TWRP Major Boot Loop
hey guys, im new here and i desperately need help with my phone!
the other day i was flashing a rom on my samsung galaxy s 4g. Things were turning out fine, until i had some complications on my phone.. so, i removed the rom. when i rebooted my phone, it went directly into the team win recovery project boot loop and every time i try to reboot my phone, it goes into the twrp. I also can't wipe anything and i can't delete anything! Does anybody know how I can solve this or is my phone basically bricked
more details would be helpful..
As in what rom, or what kernel.... etc... and make sure you have the corret phone.
Same problem with t959p
Looks like I'm not alone.......here's my story
the other day I wanted to switch from a stock rom to a custom, so I flashed redux 1.3 which was actually a froyo rom, and it started draining my batt like crazy so I flashed another rom on top of the froyo rom not realizing what I was doing and somehow messed it up cuz now it will only boot into recovery.
Now just to be clear I know this was my fault, I know I should have odin'd back to stock first, but I wasn't thinking at the time.....Ohh and just so you know I've flashed this sucker hundreds of times and was always able to get out of any mess I got in.
So here is the situation as it stands now, 3 button combo to enter download does not work. I can only get it into download with the jig I made. the problem is even in download mode none of my pc's will detect the device as a Samsung composite device, so odin will not see it. I've installed every possible 32 n 64 bit driver I could find including reinstalling kies. Kies wont even see it. I've tried flashing a few roms that I know worked and still it just boots into recovery. Now one thing I'll tell you is that depending on which rom I flash I can get recovery to switch from cwm to twrp. right now I left it with cwm 6.x.
what I need is a cwm flashable stock telus t959p rom complete with bootloaders or at the very least a cwm flashable zip file containing the bootloaders to see if I can recover the phone.
ohh and if your thinking about telling me to google search for the answer then don't bother.......I've spent the last 4 days reading posts and going to different websites and repositories trying to find something that would help me and so far nothing has.
the only thing that might work as a last resort is pushing the bootloaders as per one of raver's or whitehawks posts but it's a little more complicated for me as I would have to set up a laptop with Linux as I don't think i'll be able to pull it off with any of my windows pc's, win7 and win 8 only.
so if anyone has the files I need or can make them please let me know....or if you think you have another solution I could try i'm all ears err eyes.
thanks
Jedi
Have you tried heimdall one-clicks? Maybe it's showing up as gadget or something like that. I've had luck using zadig and heimdall to bring it back from the brink of death.
http://forum.xda-developers.com/showthread.php?t=1358498
EDIT
Woops replied to the wrong thread .
Nothing to see here, move along
Would like to revive a slightly dead thread.
I upgraded to a Galaxy S3 and no longer use my SGS4G for daily use. I had AOKP and disliked it, FC's and didn't like the feel. I have been trying to install a new rom ( old rom, VH Black Ed. ). Every time It loads into TWRP I have the ability to select the zip, install, it says complete, but reboots right back to TWRP menu. I've tried flashing CWM and it will install, flash the rom, reboot, and right back to this TWRP B.S... what am I doing wrong? I want to continue to use this SGS4g for music and internet duties.
How can I install CWM and have it stay even after a reboot? This TWRP is starting to me off
Did you happen to one click to stock before you went ham at the recovery?
Sent from my SGH-T959V using Tapatalk 4

[Q] Confused as to what to do next: un-bricked, but recovery is still a garbled mess

So I rooted my brother's infuse 4G because it was slow as sin and needed A. a data/cache wipe and B, I wanted to give him Jellybean
I followed all the instructions I could; rooted, installed the modded 3e (or thought I did), got a CWM installed afterwards, and then set about installing first CM9 (as the Jellybean ROM post says I should) followed by the actual ROM and its Gapps. Well, I installed CM9 (although it seemed to take all of 30 seconds, rather fast...) when I tried to wipe data/factory reset, CWM froze. I rebooted and from then on I had it softbricked. Stuck booting at the samsung logo, and when I tried to return to the recovery, the recovery was a garbled mess that looked like a scrambled TV channel. I used Heimdall and did the one-click reset to stock, and here I am. The phone boots to stock just fine, but my recovery is still completely boned.
Do I re-root? How do I install CWM again without being able to install 3e? (can't install 3e without a working recovery in the first place, after all..)
One anomaly of note - when I was going about all this, booting the phone into recovery always got me 3e, even after installing CWM. I had to manually install CWM by using an update.zip and "reinstall packages" every time I wanted to use CWM. ROM manager would boot me to CWM, but it took several reboots and a flashable CWM zip before I could even get CWM installed in the first place - ROM manager refused to do it the easy way.
What did I do wrong, and more importantly, how do I get back on track? What do I do to put a fixed recovery back on this thing? Odin? ADB?
Today was the first time I ever used Heimdall, I've been a fair weather flasher since the beginning, I've never had to ADB or Odin.
It sounds like you didn't install cwm recovery properly, but I'm not sure I've never ran into this problem before. If you go here
http://forum.xda-developers.com/showthread.php?t=1524081 and carefully read over the first and second post you should end up with gb and red cwm recovery. The way I've done it was to put the phone in dl mode and flash the first package (the stock gingerbread att rom). After it is installed and booted up, I then power it off and go back into dl mode. Then flash the second package, which is just the kernel and red cwm recovery, (be patient because it takes awhile). Once that is done then go into recovery and wipe data/factory reset, wipe dalvik cache, wipe system, and install cm9. I think it only installs the kernel and recovery the first installation after formatting and creating the partitions, but after its done you have to go through the menus and tell it to reboot. After it reboots it will be stuck at the cyanogenmod galaxy s logo, so you will have to go into recovery once more. When you're there you should have blue cwm (only continue if you do) and install jb, without actually having to install the full cm9. When you navigate to which ever jb rom you want to install, a prompt will appear stating that there is incompatible partition layout and to confirm installation you will have to reselect the jb zip again to install. It will flash pretty quick because at this point its doing the same thing as when you went from gb to cm9 and only installs the kernel, recovery, and reformat/creates the partitions, (I think). It will reboot on its own but it will take you back into recovery. At this point all you have to do is navigate to the same jb zip you want to install and flash it, followed by gapps, and then reboot system. This process has worked for me but I highly recommend reading and following the instructions given in the post above.
Use goo.I'm app. Also you need to flash GB bootloaders in Odin . is recovery all colorful? If you see recovery fine just get goo app on play store and install a recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I would go the ODIN route, I have bricked so many times because i try to make the impossible possible. Just search for a already rooted pda,mdr file. I skipped the cm9 part idk if that would make things better or not but as my post says im a risk-taker
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
UnhoIy said:
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
but if don't have any problems i'm good right or should i go back and do it
MajorLeagueROM said:
but if don't have any problems i'm good right or should i go back and do it
Click to expand...
Click to collapse
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
UnhoIy said:
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
MajorLeagueROM said:
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
Click to expand...
Click to collapse
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
UnhoIy said:
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
Click to expand...
Click to collapse
lol it happens to the best of us

Categories

Resources