ROOTING your Ubislate 7ci
DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void
I found this awesome guide in http://forum.xda-developers.com/member.php?u=517426, updated by baudi, I followed the steps to install the adb driver in my laptop and my Ubislate showed up in adb prompt
If windows cannot install driver automatically, choose the option to select it from a directory and point it to the Android SDK.
I did not use the unlockroot.com option though, I used the attached file, with instructions from http://forum.xda-developers.com/showthread.php?t=1929822
It worked for me and I have a rooted Ubislate 7ci. DO IT AT YOUR OWN RISK. You could brick your tablet and of course your guarantee will be void
ClockWorkMod recovery working
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Can you tell me the kernel version and other hardware of your device , i have 7c+ and looking for working CWM recovery so if same will work for me that would be great. Otherwise if you have any recovery detail about 7C+ then please share... I dont even know how to boot into recovery
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will it work on 7c+ ?
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
will this work on ubislate 7c+ ?"
utsav17 said:
will this work on ubislate 7c+ ?"
Click to expand...
Click to collapse
Anybody? Will this work for Ubislate 7C+?
nitin.chobhe said:
Anybody? Will this work for Ubislate 7C+?
Click to expand...
Click to collapse
There are lot of threads to root 7C+ (Gingerbread). I am not sure this will work, this is tested only in ICS.
Re: Successfully Rooted Ubislate 7ci
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion
nitin.chobhe said:
Can you please post links? I searched a lot but couldn't find even a single one.
Thanks in advance...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
srinivask82 said:
I got Ubislate 7+ and 7C+ confused. Sorry about that
Ubislate 7C+ shares the same specs as 7Ci other than the GPRS module, so this root should work, in theory. As always, use it at your discretion
Click to expand...
Click to collapse
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?
srinivask82 said:
That is a great tip. I heard few other generic Chinese devices coming as unlocked. Thanks for the info.
From your signature it seems that you are a pro, can you please start working on Jellybean for Ubislate 7C*?
Click to expand...
Click to collapse
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.
srinivask82 said:
I rooted my tab using the process which I have written above, so no way to know whether it was rooted before. Also, I have installed CWM recovery in my 7Ci, It worked with one major flaw, Cannot go back in menu (since the CWM designed was not for this tab and 7Ci does not have a physical back button). I used this CWM to take a backup and Since it cannot comeout, I kept on pressing Vol down and power key till my tab shutdown.
ClockWorkMod recovery working
FY - I should have stopped here, but went too far and installed CWM touch and screwed my TAB, now it is in bootloop. I have even tried draining the battery, still no luck.
Click to expand...
Click to collapse
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.
Cyber-Logic said:
Thanks for sharing.. sucks that you're stuck in a boot loop though. :-/
I have CWM working on my Ubislate 7C+ as of now.
Click to expand...
Click to collapse
What?
Really Can you give me the link of that CWM Recovery?
shubhdeep99 said:
What?
Really Can you give me the link of that CWM Recovery?
Click to expand...
Click to collapse
Lol, it's the same one which was posted here!
See my post here, I tried all this about an hour ago:
http://forum.xda-developers.com/showthread.php?t=2161965&page=4
I used the link posted by Utsav17.
shubhdeep99 said:
We can start bro but we dont have any backup for recover from bootloop and also over Boot loader is locked so we can not use CWM recovery... But we still can do maythings if Datawind provide us Firmware(Rom) of Ubislate 7C+ and also flashing tool of same firmware for backup for our device. As i heard somewhere that our device is based on allwinner (a chines mobile maker co.) and its chipset never bricked so we can do lots of thing if they support us...
So just push datawind to give us firmware of our tab ... just contact them by phone, mail and ask for this...
Edit:- Have you checked your tab is rooted or not?
Click to expand...
Click to collapse
Hi shubhdeep99,
What all things one needs to start working on JB for Ubislate 7C+? Now as CWM recovery is working with this tab can you please start working on it? Let us know if you need any help regarding this.
Thanks!
Nitin
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
shubhdeep99 said:
Guys If you dont mind can you please install SuperSu or Root Checker App from Play Store And check your Tab is already rooted... because i got 2 7C+ and both are rooted and overclocked...
Please check and confirm...
Click to expand...
Click to collapse
Installed SuperSu and it says that the tablet is rooted. You were right this tab is pre-rooted...
Multiple users reported success
I soft bricked my Ubislate 7Ci by installing incompatible recovery, got it fixed thru datawind tech support (They fixed and sent it in few days :victory
I rooted again using this procedure and it worked again. I have tested twice :good:
srinivask82 said:
I have used the attached file to install ClockWorkMod recovery. As always, DO IT AT YOUR OWN RISK. You could brick your tablet.
This is not custom written for Ubisate 7ci. This is CWM recovery provided for A13 tablets, which works in Ubislate, since the kernel is similar / same. PLEASE NOTE, since Ubisate 7ci does not have a hardware back button, we cannot use it effectively.
VOL INCREASE - UP
VOL DECREASE - DOWN
POWER - SELECT
After performing the required action, for example backup, press VOL DECREASE and POWER at the same time to shutdown the tablet.
Click to expand...
Click to collapse
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?
CWM Recovery
ahirwar said:
I have installed this recovery it works but there is no key combination to go recovery mode when tab is off.
We can go when tab is on.
Second thing we can't use backup if tab is not booted, we can use backup via cwm recovery only.
Right?
Click to expand...
Click to collapse
You can press the VOL UP button (keep on pressing) and press the power button. Keep on pressing both buttons till you enter recovery. If the CWM installation is not proper you will get the default recovery which is not working well in Ubislate.
The only thing which is not possible in CWM in 7Ci is going back thru the menu. I always long press the power button to shut the tablet down after I finish my work in CWM and turn the table ON in the usual way. It always works for me.
PS: Taking a backup should be the first thing you do, It had saved me quite a few times.
Dears
Recently I rooted my nexuys s GT -i9020 , and also installed touch clockwork mode recovery . today i was installed one software and I am granted superuser permission to him, the name of the software is forgotten from me, but when I opened that software my phone is restarted and hanged on Google's logo startup screen.
THEN I WIPED ANY THING ON MY NEXUS S, SUCH AS FACTORY DATA RESET, AND USB STORAGE AND FORMAT SYSTEM ETC
I also completely formatted all the data on my phone and
Now when I am pushing the power button it directly going to recovery mode and the option on my screen are.
FASTBOOT MODE - NO BOOT OR RECVOERY IMG
PRODUCT NAME - HERRING
HW VERSION - REV 11
BOOTLOADER VERSION - I9020XXLC2
BASEBAND VERSION - I9020XXKL1
CARRIE INFO - KIT
SERIAL NUMBER - 3035C767C6600EC
LOCK STATE - UNLOCKED
SELECT - VOLUME UP OR VOLUME DOWN
EXCUTE - POWER
Please help Me that how to solve this problem, and also tell me that if there is easiest method to install kitkat on my phone because this is my dream to see kitkat 4.4.2 on my nexus s GT -I9020
AND ALSO SHARE ME SPECIFIC USB DRIVERS OF THIS PHONE ,
THANKS
REGARDS!!!!!!!!!!!!!!!!!!!!!!!!
http://www.droidviews.com/nexus-s-guide-unlock-bootloader-root-install-custom-recovery-custom-roms/
I visited this site many times but this website is not helpful for me because there is no link to download custom roms, And also I dont know that what type of ROM is suitable for me please share a good custom Rom for me and also method of installing custom Rom .
I will be very thankful to you
Download Nexus Root Toolkit if you're too lazy
Please close this thread
My problem is Solved Thanks XDA Team
I was Installed CM10.2 And nice working for me
THANKS AND REGARDS
ALL CREDIT GOES TO XDA TEAM!!!!!!!!!!
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed
Hello All
I have been searching all over this forum, You Tube, the internet. I still can't find something to root my phone. I have it in developers mode. I have debugging on and unlocked boot. I have searched through all the root information I could find on here. I even started adding information to the section about the phone so others could get into developers mode at least.
My phone LG X power model lgls755 on boost mobile.
Please help me out. Every android I have owned since the original Motorola I have rooted. I'm not a stranger to the subject. LG has this phone locked good.
Wait how did you unlock the boot loader? Its hidden and you cant boot to bootloader or to fastboot from recovery mode. Tell me ur secrets!
GWARslave119 said:
Wait how did you unlock the boot loader? Its hidden and you cant boot to bootloader or to fastboot from recovery mode. Tell me ur secrets!
Click to expand...
Click to collapse
Perhaps they just meant they had the oem unlock switch on. If not, I second this question.
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
BoonmaC said:
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
Click to expand...
Click to collapse
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Venkata Lochan Nune said:
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Click to expand...
Click to collapse
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
BoonmaC said:
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
Click to expand...
Click to collapse
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Venkata Lochan Nune said:
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Click to expand...
Click to collapse
Or wait a sec, is your phone powered by mediatek? And is it booting to recovery? If yes, attach an image of the recovery.