Related
Hi Guys!
Just got my nexus 5, I was wondering as to which current ROM's available offer any of the following :
1) Halo
2) PIE control
Thanks in advance !
Not sure about ROMs but if you're happy with the stock ROM and just want those two features then you can install the Xposed Framework and download Gravity Box for PIE control and XHalo modules. I know the Gravity Box module is functional, not sure about Halo since I don't use it. Hope this helps.
Sent from my Nexus 5 using XDA Premium 4 mobile app
just go through the roms and read the op's, they list all the features
wkmyers62 said:
Not sure about ROMs but if you're happy with the stock ROM and just want those two features then you can install the Xposed Framework and download Gravity Box for PIE control and XHalo modules. I know the Gravity Box module is functional, not sure about Halo since I don't use it. Hope this helps.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you, i will look into Xposed Framework. One question though, does installing Xposed Framework require the device to be rooted ? I know i have to root the device to install a custom ROM but was just wondering if Xposed Framework can be installed without rooting.
TheAtheistOtaku said:
just go through the roms and read the op's, they list all the features
Click to expand...
Click to collapse
I looked through all the ROMs in the nexus 5 sections, only a few of them list change logs the rest just instructions on how to install the ROM. I believe there was just ROM thread that actually listed out all the features added to the ROM.
I understand that nexus 5 development is in its early stages and I do not expect to see full feature functionality for a while. Being kinda new to the android scene i am still trying to understand all the terminology used so change logs really dont elaborate on anything yet. Thank you though
fruitsalt said:
Thank you, i will look into Xposed Framework. One question though, does installing Xposed Framework require the device to be rooted ? I know i have to root the device to install a custom ROM but was just wondering if Xposed Framework can be installed without rooting.
Click to expand...
Click to collapse
1) you don't need root to flash custom ROMs. Only custom recovery. You do however, have to unlock your bootloader.#
2) Yes, Xposed needs root.
Just wanted to check if any folks here have tried installing Xposed framework on a non-developer edition Moto X (I have VZ) on Kitkat.
Any issues faced like force close etc? Also I read that MotoXposed does not work, what other extensions are people using on Xposed on 4.4? Does Gravitybox, Xprivacy etc work fine?
It works fine for me, you just need root and access to write to system. Two threads in original development have guides for this.
Sent from my XT1060 using XDA Premium 4 mobile app
tejaskary said:
Just wanted to check if any folks here have tried installing Xposed framework on a non-developer edition Moto X (I have VZ) on Kitkat.
Any issues faced like force close etc? Also I read that MotoXposed does not work, what other extensions are people using on Xposed on 4.4? Does Gravitybox, Xprivacy etc work fine?
Click to expand...
Click to collapse
Just use GravityBox [KK] from the modules section of XposedInstaller. Works perfectly and has tons more tweaks than MotoXposed.
bravesfan171 said:
Just use GravityBox [KK] from the modules section of XposedInstaller. Works perfectly and has tons more tweaks than MotoXposed.
Click to expand...
Click to collapse
I second that. Using GB KK and it has all the main interface tweaks that I need. No FC. MotoXposed doesn't even work in KK, so don't even bother trying it.
I rooted my phone I have twrp recovery "closed framework", "gravity box kk" And I want to know if I can use two different xposed modules at the same time the thing I listed above help me give my phone the knock knock feature and I want to use xposed installer to get more modules and features... is it safe to do this?
UnderstandFones said:
I rooted my phone I have twrp recovery "closed framework", "gravity box kk" And I want to know if I can use two different xposed modules at the same time the thing I listed above help me give my phone the knock knock feature and I want to use xposed installer to get more modules and features... is it safe to do this?
Click to expand...
Click to collapse
Sorry I mean xposed framework.
UnderstandFones said:
I rooted my phone I have twrp recovery "closed framework", "gravity box kk" And I want to know if I can use two different xposed modules at the same time the thing I listed above help me give my phone the knock knock feature and I want to use xposed installer to get more modules and features... is it safe to do this?
Click to expand...
Click to collapse
your kernel completely controls your phone, it ties the cpu to tbe os and to the rest of the hardware. its impossible to run two kernels. which would control your phone? it is literally the brains mass of your phone.
I use YouTube AdAway, Pandora Patcher, App Settings, Xposed Lockscreen Wallpaper, Play Store Fixer, MinMin Guard, 30 Volume Steps, Xposed GEL Settings, Alarm Clock Plus and a few more...
So, yes.
Sent from my Nexus 5 using Tapatalk
To give a more simple answer:
- You can't have 2 kernels at the same time
- You can have multiple Xposed modules at the same time
Also, questions belong in the Q&A section of the forums.
Thank you
Sent from my Nexus 5 using XDA Free mobile app
BTW kernels and Xposed are two completely different things. I assume by the title you're using a custom kernel, not Xposed, to use Double Tap to Wake feature. You can only install one kernel at a time. If you flash another kernel, the other one gets overwritten.
As far as Xposed goes, use as many modules as you want.
Sent from my Nexus 5 using Tapatalk
You can use multiple xposed modules. Just keep in mind xposed modules can conflict with each other if they both do the same thing.
After lots of tries i found there is a problem between Xposed and All other camera mods for our Z3 (i have no info about other phones like Z2). So we cant use Xposed + Pexocam or Cyberian or... in Marshmallow (there is no problem with LP!) and it gives u something like this message: "Camera is in use by another application, please close other apps..."
(Note i tested with both .575 and .570)
Anyone has a workaround or has both Xposed and camera mod without problem??
agent.47 said:
After lots of tries i found there is a problem between Xposed and All other camera mods for our Z3 (i have no info about other phones like Z2). So we cant use Xposed + Pexocam or Cyberian or... in Marshmallow (there is no problem with LP!) and it gives u something like this message: "Camera is in use by another application, please close other apps..."
(Note i tested with both .575 and .570)
Anyone has a workaround or has both Xposed and camera mod without problem??
Click to expand...
Click to collapse
I have xposed v85 and have used both of those mods. Likely it's a module than xposed as a whole as I have no trouble.
Have you confirmed it works without xposed installed? Maybe it's another mod?
Dobsgw said:
I have xposed v85 and have used both of those mods. Likely it's a module than xposed as a whole as I have no trouble.
Have you confirmed it works without xposed installed? Maybe it's another mod?
Click to expand...
Click to collapse
Yeah I confirm its Xposed, Without it everything works fine
I just had gravity box on xposed but i cleared its data so that must be a xposed problem
I confirm again
Tried once again with just xposed installed (all modules except greenify - which is inactive- were uninstalled) and camera mods not working.
I dont know how this could happen since you have both xposed and camera mods!
I did this:
flashed rom --> flashed Pexocam v8 --> Everything working fine --> Flashed latest Xposed --> Pexocam not working!!!
agent.47 said:
I confirm again
Tried once again with just xposed installed (all modules except greenify - which is inactive- were uninstalled) and camera mods not working.
I dont know how this could happen since you have both xposed and camera mods!
I did this:
flashed rom --> flashed Pexocam v8 --> Everything working fine --> Flashed latest Xposed --> Pexocam not working!!!
Click to expand...
Click to collapse
Flash xposed first.
I always flash ROM, Xposed, then mods.
Tbh it shouldn't make much difference but something to try.
I'm on MWA 5.0.0 by Pandemic.
If you use custom ROM perhaps something has been edited that the camera required to function?
There's a lot of variables here :/
Could try another ROM with xposed and camera mod and see if it works?
Troubleshooting is gonna suck on this one as it works for some and not others.
Well i tested flashing xposed then camera, makes no difference
I use stock pre-rooted .575, it mustn't be problem because i had that problem with .570 too but there wasn't any problem with LP roms with same xposed version!
I saw some other people had this problem, i used almost all of their solution like clearing data and cache, completely removing camera then installing new mod, etc, but non of them works. That's a xposed problem and idk what's wrong!
Note that I'm using D6633 variant
agent.47 said:
Well i tested flashing xposed then camera, makes no difference
I use stock pre-rooted .575, it mustn't be problem because i had that problem with .570 too but there wasn't any problem with LP roms with same xposed version!
I saw some other people had this problem, i used almost all of their solution like clearing data and cache, completely removing camera then installing new mod, etc, but non of them works. That's a xposed problem and idk what's wrong!
Note that I'm using D6633 variant
Click to expand...
Click to collapse
Its "not" an xposed problem, its quite easy to blaim xposed but i use it a long time and totally no issues with it, maybe is it just the camera mod or duplicated lines in the end of your build.prop !
Pandemic said:
Its "not" an xposed problem, its quite easy to blaim xposed but i use it a long time and totally no issues with it, maybe is it just the camera mod or duplicated lines in the end of your build.prop !
Click to expand...
Click to collapse
I use xposed for a long time too and I never had any issues with it - thanks to its creator - but whenever i uninstall xposed, camera mods work well. Idk if there is any problem with build.prop but it mustn't be camera mod problem since many users installed it successfully.
Do you have superuser mod?
Are you using the versión of MM?
latest versión?
Logs?
panchuckles said:
Do you have superuser mod?
Are you using the versión of MM?
latest versión?
Logs?
Click to expand...
Click to collapse
1. I had Rajeev's Superusermod for cyberian camera III since it was needed but for PexoCam i didn't flash it.
2. I use MM version
3. Everything is at latest version
4. No logs
Hello, sorry that I've dug out an old post. But yes, my Xposed is also conflicting with camera mods (both Cyberian & Pexocam). Camera mods worked when Xposed framework was not installed but once installed, crashed.
Have you found any workaround?
On stock pre-rooted .575 (D6653) as well.
Thanks!
I haven't found any workaround yet
Maybe professionals could help us if they see this thread
Just wanted to start a thread for people to report which exposed modules are working
I am using GavityBox. I have not tried many options in it yet. The circle battery, clock mods, and network traffic meter are working. Navbar mods do not seem to work. Was hoping to get rid of the nav bar and use LMT((pie controls).
Exposed
Working:
GravityBox (most options work)
Magisk
Not Working:
Dolby Atmos (LeEco Le Pro3)
Dolby Atmos Classic (Lenovo A7000)
nrage23 said:
Just wanted to start a thread for people to report which exposed modules are working
I am using GavityBox. I have not tried many options in it yet. The circle battery, clock mods, and network traffic meter are working. Navbar mods do not seem to work. Was hoping to get rid of the nav bar and use LMT((pie controls).
Click to expand...
Click to collapse
I'm using Pie, but I did have to bring my nav bar back. When I did the build prop edit I kept getting random, system FCs.
Amplify and adaway for YouTube working
I'm using Adblocker reborn, Gravitybox, and Greenify Xposed modules, along with the Magisk Greenify for proper implementation. As well as Magisk Busybox, and last but not least, injected YouTube background playback, black themed for Magisk. You can also apply the swipe to seek module from Xposed and they work great together. Zoom to fill screen works great too. Best module out there!
Sent from my PH-1 using Tapatalk
Airwolf79 said:
I'm using Adblocker reborn, Gravitybox, and Greenify Xposed modules, along with the Magisk Greenify for proper implementation. As well as Magisk Busybox, and last but not least, injected YouTube background playback, black themed for Magisk. You can also apply the swipe to seek module from Xposed and they work great together. Zoom to fill screen works great too. Best module out there!
Click to expand...
Click to collapse
Can't find zoom to fill screen is it labeled something else?
Under I for "Injected"
Sent from my PH-1 using Tapatalk
I know I'm gonna get blamed for this haha, but I can't find where to download Xposed. Anyone have a link??
mpetruzz said:
I know I'm gonna get blamed for this haha, but I can't find where to download Xposed. Anyone have a link??
Click to expand...
Click to collapse
https://www.xda-developers.com/official-xposed-framework-android-nougat/
Sent from my PH-1 using Tapatalk
Thanks! Which one do I use?? there are quite a few
mpetruzz said:
Thanks! Which one do I use?? there are quite a few
Click to expand...
Click to collapse
You need the SDK version 25, but I don't think flashing it in TWRP works. I just downloaded the installer and flashed SDK 25 from within the installer.
Sent from my ONEPLUS A3000 using Tapatalk
Airwolf79 said:
I'm using Adblocker reborn, Gravitybox, and Greenify Xposed modules, along with the Magisk Greenify for proper implementation. As well as Magisk Busybox, and last but not least, injected YouTube background playback, black themed for Magisk. You can also apply the swipe to seek module from Xposed and they work great together. Zoom to fill screen works great too. Best module out there!
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
could you please list them? I cant find any youtube background playback and zoom to fill screen.
elrosid said:
could you please list them? I cant find any youtube background playback and zoom to fill screen.
Click to expand...
Click to collapse
Read the thread. Someone already asked. Post #6.
Anyone know how to enable auto hide statusbar? I've been looking, no luck.
MistakenUtopia said:
Anyone know how to enable auto hide statusbar? I've been looking, no luck.
Click to expand...
Click to collapse
If ur running stock, even if u hide the status bar, it won't make use of the full screen. Only way to do this for now, is by running Lineage based ROMs.
Xposed isn't available on Beta 3 yet, right? I see there's one for B2, but I'm guessing it won't install on B3.
supervandy said:
Xposed isn't available on Beta 3 yet, right? I see there's one for B2, but I'm guessing it won't install on B3.
Click to expand...
Click to collapse
Hey so b2 and b3 for essential run the same Android 8.0.0 so Xposed works on all betas.
*Xposed
thehappydinoa said:
Hey so b2 and b3 for essential run the same Android 8.0.0 so Xposed works on all betas.
Click to expand...
Click to collapse
Yes. I believe Xposed currently supports all versions, including Oreo 8.1 (SDK 27)