Hi.
I'm trying to root my Galaxy Tab 2 10.1 (wi-fi)
I seem to have been able to root it however it seems busybox neither superuser is not detected by root checker app. As far as I'm aware busybox is needed to continue to install cwm right?
I have super user installed though...
Please understand this was gifted to me by a relative who lives in Australia i.e. origin of the product is Australian.
I can't seem to understand how to flash cwm onto this.
I followed a bunch of sites.
Links:
http://droidfirmwares.com/how-to-root-galaxy-tab-2-10-1-p5110-easy-tutorial.html/2 (mainly this but it seems I sort of followed mix advice of both)
http://forum.xda-developers.com/showthread.php?t=2203309
I used the PDA option in Odin however after that I can't make head or tail of how to proceed to install clockworkmod recovery.
It seems incredible that just 2 weeks back I had been able to mod my Sensation XE and Xperia Z but am utterly confused as to how to proceed in this case. Please help.
Continuation
Apparently every time I run Odin and install it always installs and in root checker app it shows rooted however superuser and busybox are not shown although superuser asks permission for using root checker which I grant??
Whats happening? :X
I hope I have made my position a little clear.
1. It shows rooted in root checker
2. I have supersu installed (althought root checker denies it)
3. How do I proceed to install CWM (I tried installing couple of times from playstore it downloads the update after I select my model no: and after that it gets stuck on flashing)
4. Please explain step by step
PRESENTING ROOT MASTER.APK MOODED VERSION ROOT YOUR FON EASILY WITH FEW STEPS WITHOUT PC & BEST FEATURE IS 1 CLICK UNROOT
GENERALLY NORMAL ROOT MASTER APP CUMS IN CHINESSE LANGUAGE SO USER FACE PROBLEM WHILE ROOTING THERE DEVICE & AFTER ROOTING THERE DEVICE ALSO BCOZ EVERY THING APPEAR IN CHINESSE LANGUAGE
ROOTING IS NOT A BIG PROBLEM IN CHINESSE LANGUAGE BUT AFTER ROOTING THE SUPERSU VERSION IS ALSO APPEARS IN CHINESSE NAMED AS PERIZUMA RUMAH WITH WHICH USER FACE PROBLEM TO THE TO GIVE PERMISSION TO SUPER SU
SO FROM NOW FORGET THE TENSION OF GETTING ALL THIS HEADACHE WITH THIS MODDED APP U WILL GET SUPERSU IN ENGLISH VERSION WHICH WILL BE EASY TO USER TO UNDERSTAND & GIVE PERMISSION
MODDED MINS JUST MODIFIED THIS APP REPLACED CHINESSE SUPERSU WITH ENGLISH SUPERSU
INSTALLATION PROCEDURE :-
DOWNLOAD & INSTALL AS NORMAL APK
MULAI ROOT
ROOT
RED OPTION THAN IT SHOWS NETWORK LINK FAILURE IT MINS U R ROOTING ENJOY
DOWNLOAD LINK MODDED ROOTMASTER.APK
http://www.mediafire.com/?ny7pv2dpztqdax1
NOTE:- IF U WANT TO UNROOT JUST OPEN SUPERSU
GOTO SETTING OPTION IT MUST BE ON RIGHT TOP CORNER
CLEANUP MENU
CLICK ON FULL UNROOT
YOUR FON WILL BE COMPLETELY UNROOT NOW
Thank u
HIT THANX IF U LIKE MY WORK IT WILL HELP ME TO POST & BRING MORE THING FOR U
Uploaded 2013
Not working on samsung GT7270
PS: on mediafire said uploaded 2013??
Working on thl A3
App's operation is confusing, as it appears to 'hang' with this on the screen: "The network links failure,please check"[sic].
But ... exit from that screen by clicking Home, then test by running (for example) Root Checker Basic, and see confirmation of Root:
Congratulations!
This device has root access!
SuperSU is now installed (in English as the docs said) and when run, it asks to update the binary (normal behavior).
Strange, ADB devices -l command failed, device restarted, failed again.
Full power off -> Reload OS, normal operation restored. Not sure what happened here, but it's back to normal. Just try everything, sometimes ...
What failed, with this model A3:
Framaroot, several different versions
Towelroot v3
System Information:
Android version: Jelly Bean 4.2.2
Build number: thl.A3.03. 163A. 140411. JB5.V1. WBGA.EN.COM.4P2_MTK6572_W
There is a report of Framaroot working on this phone, but I couldn't duplicate that, nor could discover which version was claimed to be working.
samsung galaxy tab2
It work for me.but I have not been able to boot into recovery . I no I'm doing something wrong. And yes I am rooted.
can i root NOTE 2 4.4.2 using this apk?
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
i looked around for some suggestions that might work, but sorry, i cant find any.
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
i need root too
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
I try but not work.
Can someone give me some advice or point me in the right direction please
M3tt said:
Someone help me to root this brand-new smartphone, i tryed framaroot, kingo root and mtk droid root but with no sucess... Someone help me please
Click to expand...
Click to collapse
Hi sir its been four months, did you find a way to root your blu neo 4.5? i desire to also, thanks in advance.
I'm also looking for help
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Could u possibly do a step by step walk through. That would really help .
Kingo Root instructions
mar_sm said:
Could u possibly do a step by step walk through. That would really help .
Click to expand...
Click to collapse
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Need4Sneed said:
Just picked up a Neo 4.5 as a gift for someone today. Rooted & installed SuperSU binary & App w/ Framaroot v1.9.4. Maybe the version you tried didn't have the correct strings for the MT6572 yet. I believe it worked with Boramir.
Click to expand...
Click to collapse
Any chance you could PM me or mirror the 1.9.4 apk? I can't find it from a reliable resource online, and 1.9.3 did not root my new Neo 4.5. Tried several other rooting tools, none of which worked, so I'd love to be able to get my hands on the apk you used to do the root.
Thanks!
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've tried Kingo Root, One Click Root, iRoot, towelroot, framaroot.... I tried lots of rooting methods
... Watched a lot of YouTube videos. I saw one in Spanish and the neo 4.5 is rooted, but I don't understand, and I'm sure its just a show n not a tutorial on how to root... Any help?
CVAngelo said:
I´'ve rooted several BLUs with Kingo Root (just Google search for it and install it on your laptop). The challenge if you are a noobie is that sometimes you miss a step OR people assume that you know the basics, so they forget to tell you about some important steps that you must take before you root.
Instructions:
1. Install Kingo Root.
2. On your BLU, open Settings (make sure you have allowed applications to be installed from Unknown Sources...you'll find this option under Security in the Settings)..
3. In Settings, go to About Phone and rapidly click on the "Build Number" as many times as it takes to say, "You are now a developer". This will open a new option in the Settings called Developer Options.
4. In Settings, now go to Developer Options and make sure it is ON and also turn on the USB Debugging. VERY IMPORTANT!
5. Now connect your BLU to your computer via a USB cable and wait till all the drivers are installed and the device is READY TO USE.
6. Disconnect your phone from the computer.
7. Run the Kingo Root software.
8. Connect your phone to the computer (Kingo will eventually connect to the phone and then will show you a big ROOT button.
9. Click the big ROOT button and sit back till it does its thing.
10. Wait till Kingo gives you the "ROOTED!" message and then you are done (so go ahead and unplug your phone from USB and close Kingo Root software).
11. Reboot your phone and confirm root (download Busy Box Checker from Play Store). You might also want to download Busy Box X and install the busybox binaries..
OPTIONAL SUPERUSER:
You don't have to do this next part if you're happy with Kingo User.
Note that these days, Kingo Root will install a superuser (su) binary that is controlled by their own app called Kingo User instead of the SuperSU app. If you want SuperSU by Chainfire, you have to search XDA for BETA SuperSU 2.49. You'll find a zip file with a beta version of SuperSU and a script that will eliminate Kingo User and replace it with SuperSU.
Install BUSY BOX X on your phone (download from Play Store).
Place the SuperSU v2.49 zip on your SD card in the phone (IT MUST BE THE VERSION 2.49 NOT THE OFFICIL 2.46 OR THIS IS NOT GOING TO WORK). Then boot into recovery (to do that you turn your phone off and then after it is off, you restart it with the power button while you are holding down the volume UP button). Then you use the menu you find there to "Install a zip from SD card". Select the zip you just put on the SD card, and it will flash the SuperSU program and binaries to your phone, while deleting the Kingo User app and it's binaries. Now select Reboot System at the top of the menu and you're all done.
Click to expand...
Click to collapse
I've attached a photo of my device info. Currently the device is locked to GT&T.
AgentNash said:
I've attached a photo of my device info. Currently the device is locked to GT&T.
Click to expand...
Click to collapse
I really hope that someone can show me how to root this phone
Stone Fist said:
I really hope that someone can show me how to root this phone
Click to expand...
Click to collapse
You still have not rooted your Neo 4.5? Can you give us a little more information? Respond to the following questions:
1. Have you turned on Developer Options on the phone?
2. Have you turned on USB Debugging in the Developer Options?
3. Have you installed the USB drivers for your phone?
4. Download and run MTK Droid Tools (as administrator). Just Google it and you will find lots of sources for the software (including here on XDA). Then connect your phone via USB cable. What message is shown on the bottom left corner of the MTK Droid window? Take a screenshot of your computer screen if possible and post it here.
Once you've answered these questions, we'll be able to help you.
Angelo
It is done
i root it
You have to use the latest version of Kingo root apk. and install it on your phone
Make sure u have the usual Debug mode on and to allow unknown apps ......it is simple and easy
try 360 Roo
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
---------- Post added at 04:36 PM ---------- Previous post was at 04:30 PM ----------
drmarc said:
Hi, for everyone trying to root blu neo 4.5, I have recently got my phone rooted and had tried all the other root apps out there, but the one that did the job is 360 Root, you can download it from google play store or just google it online and download. you should watch the video on youtube also, it's not in English but will still help you to understand the step by step process.
Click to expand...
Click to collapse
so I've got my blu neo 4.5 rooted but there is no custom ROMs online to download, especially lollipop. if anyone knows where I can get custom Rom for blu neo 4.5 please let me know.
I was able to root my Blu Neo 4.5 with KINGROOT
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Lol. I rooted my phone with 360 root. A Chinese app and soon after the phone died because of a faulty charger.
hey guys good news,i able to root my bro's Karbonn A52+ mobile.it is good except 3.5 inch screen & no 3g.so i'm telling u how i rooted this mobile.download the pc version of iroot (aka vroot) google it because i cant post link here
make sure u have installed adb & usb drivers in your pc & enable usb debugging by going in settings & about,then tap build number some times.install & open the software in your pc & connect a52+ it'll detect it,then click on root button.then it'll auto reboot.let it boot then u'll find some chinese apps installed.dont worry just press back button or home button if any app opened,give them grant by clicking on right hand side.open the app which have horse icon,click next.then close it.after that install chainfire supersu latest version from play store or from outside.open it & give it grant through chinese super su.it'll say su binary needs to be updated,click continue & select normal.it'll ask for grant several times,do that.after installation success.go in settings & select convert to system app.just continue with that.after that it'll reboot & u'll find only english chainfire supersu instead of chinese horse icon su.u can uninstall remaining chinese apps too.make a backup of imei & full system with mtk droid tools if u want (optional) enjoy :fingers-crossed:
you can join fb group too Karbonn A52+ Development.Thanks
When u root while in online english king user is installed but u have to connect pc and Mobile to in online
Sent from my A52+ using XDA Free mobile app
root karbonn a52+[4.4.2]
hi frd i successfully rooted my karbonn a52+ with android version 4.4.2 kitkat with using king root.apkwhich is found in afficial website of king root and the rooting process doesnot need any pc
I've been following this guide and well here are the steps.
"1) To get started, download Framaroot application and install it on your Lenovo IdeaTab. Once done, you will see the Framaroot app in the app’s menu in your device.
2) Once installed, open the Framaroot app and tap on any of the three root exploit options listed in the main screen: Boromir, Barahir or Faramir for the installation of “SuperSu” app.
3) Once you have tapped on any of the root exploit options, the rooting process will get started and in a while you will see “Success! Superuser and su binary installed” message. Now the Framaroot app will ask for rebooting your device. Just do it.
4) After rebooting, your device will show the “SuperSU” app in the app’s menu which confirms the rooting process is successfully finished.
That’s it. Now you have successfully finished rooting your Lenovo IdeaTab S6000 Android Tablet. If you have followed this tutorial and successfully rooted your Lenovo tablet, help spread the buzz by sharing this tutorial on popular social networking websites."
I've made it to step 3 but I'm stuck there. Once Framaroot told me to reboot, I wasn't sure how to. If that's just turning it off and on then I tried that and once I made it to the app menu I couldn't find the "SuperSU" app. I also tried a factory reset. That didn't work, so I downloaded Framaroot again and now I'm just on step 3, trying to make SuperSU appear. I know for a fact I have the right tablet. My Model Number - IdealTab S6000-F. Can anyone help me?
Hi
Thanks for writing to us at XDA Assist. The best idea is probably to ask your question in the thread that contains the guide that you're using.
No response in two days, thread closed.