My M8 is being goofy and I need some advice. For some reason the thing keeps randomly kicking over to docking mode, playing my ringtone, and the diskette defaults to speaker which is getting real hard on my hearing.
I tried wiping and restoring to a NAND backup but the issues persist. I'm thinking firmware or radios are the issue.
If im wrong, can someone suggest a fix? If updating the firmware sounds wise, could some kind soul post a link to the latest firmware for the Verizon M8?
loonatik78 said:
My M8 is being goofy and I need some advice. For some reason the thing keeps randomly kicking over to docking mode, playing my ringtone, and the diskette defaults to speaker which is getting real hard on my hearing.
I tried wiping and restoring to a NAND backup but the issues persist. I'm thinking firmware or radios are the issue.
If im wrong, can someone suggest a fix? If updating the firmware sounds wise, could some kind soul post a link to the latest firmware for the Verizon M8?
Click to expand...
Click to collapse
You aren't going to like my answer but this problem can be solved by replacing the flex cable inside the phone. I have had to do this for a few phones already. It's a $15 part plus you would be wise to buy the $11 speaker grill stickers to replace the ones you take off as they won't be reasonably reusable.
There are very small ic and smd on this cable that can break loose and cause this exact symptom.
Sent from my Nexus 6 using Tapatalk
dottat said:
You aren't going to like my answer but this problem can be solved by replacing the flex cable inside the phone. I have had to do this for a few phones already. It's a $15 part plus you would be wise to buy the $11 speaker grill stickers to replace the ones you take off as they won't be reasonably reusable.
There are very small ic and smd on this cable that can break loose and cause this exact symptom.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
You're right. I don't like that answer a whole lot. Then again, I do like that it can be fixed for a somewhat reasonable price. The phone spends a lot of time on the dashboard of a big rig and the harsh vibration made me wonder if something like that might be the case. Is is the flex cable for the USB port? I'm probably going to take it to a shop and have it done rather than try it myself.
loonatik78 said:
You're right. I don't like that answer a whole lot. Then again, I do like that it can be fixed for a somewhat reasonable price. The phone spends a lot of time on the dashboard of a big rig and the harsh vibration made me wonder if something like that might be the case. Is is the flex cable for the USB port? I'm probably going to take it to a shop and have it done rather than try it myself.
Click to expand...
Click to collapse
Yes that's exactly what it is. Make sure they get the 32g version as the other one is missing an antenna connector.
Sent from my Nexus 6 using Tapatalk
dottat said:
Yes that's exactly what it is. Make sure they get the 32g version as the other one is missing an antenna connector.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Im thinking of doing it myself. Where would you recommend getting the parts?
loonatik78 said:
Im thinking of doing it myself. Where would you recommend getting the parts?
Click to expand...
Click to collapse
Bought all of mine via eBay. I can look-up some links and send you them via pm when I'm not mobile.
Sent from my Nexus 6 using Tapatalk
dottat said:
Bought all of mine via eBay. I can look-up some links and send you them via pm when I'm not mobile.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
That would be awesome! Thank you, thank you very much for your help.
loonatik78 said:
The phone spends a lot of time on the dashboard of a big rig and the harsh vibration made me wonder if something like that might be the case.
Click to expand...
Click to collapse
The vibration is easily fixed, carry the phone in your shirt pocket or ?? Your body is as good a vibration insulator as you can find anywhere!
xs11e said:
The vibration is easily fixed, carry the phone in your shirt pocket or ?? Your body is as good a vibration insulator as you can find anywhere!
Click to expand...
Click to collapse
I keep my phone on my body as little as possible. Its real uncomfortable to have a phone this big stuffed in a pants pocket all day and I almost never wear shirts with pockets. Even when I do I don't put the phone in them because its fallen out too many times. I'll probably lay it on a towel up there or something.
Mege-thanks!
I wanted to take a moment to give many thanks and utmost appreciation for the help on this problem. I got the board today and just finished installing it a few minutes ago. It's working like charm! I'm VERY happy!
Related
I recently was able to repair a water Damaged TB that i bough from Ebay (good ESN +++) and i thought i share a picture of the motherboard, it did have some extensive water residue around the processors and ribbon connectors. All of it was cleaned off using some 91% Alcohol a fine brush and some Canned air.. all works again minus a bad Front facing camera (my fault some how i killed it).
why not just get another tbolt then?
smoother2010 said:
why not just get another tbolt then?
Click to expand...
Click to collapse
I don't think you understand the point of this thread. The man was able to take a broken (Water damaged) phone and bring it back to life.
Kudo's OP!
miketoasty said:
I don't think you understand the point of this thread. The man was able to take a broken (Water damaged) phone and bring it back to life.
Kudo's OP!
Click to expand...
Click to collapse
i know but its also not fully functional.
smoother2010 said:
i know but its also not fully functional.
Click to expand...
Click to collapse
I originally bought this phone to get parts for my TB, When i got the phone it was compleatly dead would not turn on or charge. I did a little cleaning and was able to get it turned but would shut off after a few minutes, that's how i found the front facing camera was working, when i swapped it out with my bad one it did not work but for some reason after a week my old one started working again. So i finished off cleaning the corrosion and checked other components once it was fully alive i tested with my Sim card and was able to get everything working except front camera(note the camera is bad not board i was able to get my other camera working on it). I used it for a full day playing games, browsing, calling peeps and it handled just like my non water damaged TB. So all in all the TB is one Tough Bitch
smoother2010 said:
i know but its also not fully functional.
Click to expand...
Click to collapse
I guess you're not cut out to be a hacker then. The point of doing it is for the challenge of doing it. There's a certain kind of person that likes to do things just for the sake of knowing it is possible.
yareally said:
I guess you're not cut out to be a hacker then. The point of doing it is for the challenge of doing it. There's a certain kind of person that likes to do things just for the sake of knowing it is possible.
Click to expand...
Click to collapse
hacker yes, pulling apart my phone, no your right. it is impressive he got it working but myself i would of just got a newer replacement. i wasn't bashing the guy, geez you guys are critical here.
smoother2010 said:
hacker yes, pulling apart my phone, no your right. it is impressive he got it working but myself i would of just got a newer replacement. i wasn't bashing the guy, geez you guys are critical here.
Click to expand...
Click to collapse
That wasn't criticism. That was explaining why you didn't understand why he would do it. Geeze some of you guys take everything personal
Yes to all , I take stuff apart and fix it because I need to know how it works. I could have bought a new one for 350 but were is the fun in that? I bought my TB with a broken screen,lcd and housing and replaced it all, I broke the first digitizer and lcd I bought my fault for over tinkering with it, anyways after a couple of weeks of selling junk on eBay I bought another digitizer and lcd to fix it again, yes I spent about the same or more as buying a TB that was newer but from what I learned so far to me it is greater then the newer one.
Sent from my ADR6400L using XDA App
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
hatchman16 said:
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
Click to expand...
Click to collapse
Welcome, search the forum. Long story short, call HTC and have them fix it for ~$220
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
still gonna cost 200$ to replace with AT&T with insurance. but maybe the person there will be nice who knows.
SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
Thanks for the quick responses, looks like im gonna have to bite the bullet and pay the $220 bucks. AT&T has terrible customer service and they had no interest in helping me.
still not fixed
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.
hatchman16 said:
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.
Click to expand...
Click to collapse
I`ve got the same problem. Have you found a solution?
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
no :-/
Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..
ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
XtR3m3R said:
no :-/
Click to expand...
Click to collapse
Ya, that slight pinch you felt during the install......that was your $500's last words
bondarun said:
Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..
Click to expand...
Click to collapse
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.
XtR3m3R said:
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.
Click to expand...
Click to collapse
May be its an Hardware issue...
Try plugging in the display alone not the digitizer cable..
Give a try..
18th.abn said:
Ya, that slight pinch you felt during the install......that was your $500's last words
Click to expand...
Click to collapse
Did he pretty much fry the whole thing?
No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2
18th.abn said:
No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Yeah i think the new LCD is broken. With a flashlight i can see Android on the screen
So i think the backlight is broken. So i will repair the phone with a new Display and Digitizer Unit. Right?
I tried the same thing, but mine was just the glass. Forget about trying to separate LCD from glass, really you are not that skilled (any of you!). anyway, It was about 45 days after receiving my HOX and I called ATT and just told them what happened and that my phone was in 1000 pieces, said I now have a contract and no phone (though I was much more miserable and depressed sounding at the time). She said "no problem, I will just toss out this old contract and we will start from scratch" It cost me another $99 but they sent me a brand new phone. I was shocked. First time a carrier ever made me smile (other than running LTE Speed Tests)
XtR3m3R said:
no :-/
Click to expand...
Click to collapse
i don't know i can't speak
I really have no idea how the hell it got inside...left it in my bedroom came back and saw it crawling. i assumed it was on the outside of my screen, but it was really inside :\ how the hell did it get in there? Its so disturbing...
I hope for your sake he manages to crawl out again and doesn't die there.
Speaker grille maybe?
he's already dead...sigh
yo blud7...im a Trini too! noticed your bmobile avatar
Avantiel said:
I really have no idea how the hell it got inside...left it in my bedroom came back and saw it crawling. i assumed it was on the outside of my screen, but it was really inside :\ how the hell did it get in there? Its so disturbing...
Click to expand...
Click to collapse
That's messed up... you should try low pressure blower.... btw this is mbetty.. have been that happen before and that solution worked a few times... different devices tho
Wow that's very disturbing. Hope you find a solution and now I have to stop leaving my note on the floor and onto a table or something.
Sent from my GT-N8013 using Tapatalk 2
There must be a hole between lcd screen which let an ant to go under it. Im sure that hole will cause some dirt to go inside as well which later can create something like a dust cloud inside. Those are common issue with htc device. Htc sensation exactly..but i never heard its happen to sammy product before..keep crossing finger..this is something to worry about
Sent from my GT-N8000 using xda app-developers app
Lol sorry it's kind of funny, but I do empathise for you. Had read a thread in the past with the exact same issue on a tablet. I wonder if warranty will cover ants
Sent from my GT-I9300 using Xparent Cyan Tapatalk 2
Buggy tablet
mano42 said:
Buggy tablet
Click to expand...
Click to collapse
It's a feature, not a bug.
Sent from my GT-I9300 using Xparent Cyan Tapatalk 2
Warranty covered
Have you been to the store to see if it is under warranty? And what they told you?
Supposedly the screen should be sealed. I think! Or not!
Just contact Samsung and ask them what you should do. Obviously this should not be possible.
Sent from my GT-N8013 using Tapatalk 2
I'll attempt blowing some can air into the speaker grill. If that fails ill contact Samsung cuz I bought this from amazon.
if it's still eligible to return, send it back to amazon and just say that it wasn't working properly and you'll get a replacement in a day or so.
ask me how i know....lol.
mgunthi said:
Have you been to the store to see if it is under warranty? And what they told you?
Supposedly the screen should be sealed. I think! Or not!
Click to expand...
Click to collapse
Could have got in the micro sd slot and crawled around. I worked in the field years ago for a cable company, a lady called in and said her cable box LED display was cutting off numbers so 8's looked like 3's and so on. I went to here house and noticed about 20 roaches inside her box!
rand33099 said:
Could have got in the micro sd slot and crawled around. I worked in the field years ago for a cable company, a lady called in and said her cable box LED display was cutting off numbers so 8's looked like 3's and so on. I went to here house and noticed about 20 roaches inside her box!
Click to expand...
Click to collapse
Wow that's bad. I would not want to touch anything in that house. Would have to disinfect like the biochemist do.
Hold a vacuum cleaner hose up to wherever you think he got in and maybe it will suck him out?
the memory card slot has always been covered...and i honestly cant see him crawling in through the speaker grill. its way too tiny
Maybe the charging port? Either way tablets are not air tight, and the ant got in.
Pretty sure Amazon can work with you as well, I have always had good customer service experiences with them.
Makes me feel better I paid for the best buy replacement plan
I've got some scratches on the back of my One S. Its a replacement I got from HTC last week and just two days later I managed to get two scratches on them without doing anything . I've looked at this forum http://forum.xda-developers.com/showthread.php?t=1589364 but the only solution there is to replacement the back cover, which I'm not too keen on doing as its risky. Is there any kind of polish I can use to get rid of these scratches. Also I'm not sure but it seems the actual housing is flawed because my original handset never managed to get any scratches whatsoever but this one seems to scratch way too easily. Maybe this replacement is from the earlier handsets.
It does appear that they've given you an awful handset. I've had mine for a year, never used a case and I have one little chip around the charger port, and that is it. I'm not sure if HTC will do anything, but it's best to get in contact first.
kylepont said:
It does appear that they've given you an awful handset. I've had mine for a year, never used a case and I have one little chip around the charger port, and that is it. I'm not sure if HTC will do anything, but it's best to get in contact first.
Click to expand...
Click to collapse
Yeah I agree and I did contact them and they said its not covered in the warranty and they'll charge me for a repair .
lonegunman0 said:
Yeah I agree and I did contact them and they said its not covered in the warranty and they'll charge me for a repair .
Click to expand...
Click to collapse
I've found in previous experiences with the HTC support team that you have to be very, very forceful with them. If I was in your situation, the right thing to respond would be to turn the blame on them for not electrocuting it properly. Just remember that the customer is always right, they normall let up after a good fifteen to twenty minutes.
kylepont said:
I've found in previous experiences with the HTC support team that you have to be very, very forceful with them. If I was in your situation, the right thing to respond would be to turn the blame on them for not electrocuting it properly. Just remember that the customer is always right, they normall let up after a good fifteen to twenty minutes.
Click to expand...
Click to collapse
Thanks mate I'll try that but I doubt I'll be given a replacement since I've gone through 7 repairs and 3 replacement handsets. HTC customer service really does suck!
Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.
kylepont said:
Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.
Click to expand...
Click to collapse
Yeah well all the problems started when tried doing a supercid on my phone which failed. I then sent it in for repair and ever since then its been a nightmare
kylepont said:
Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.
Click to expand...
Click to collapse
You do mean anyhow
kylepont said:
anywhore
Click to expand...
Click to collapse
usaff22 said:
You do mean anyhow
Click to expand...
Click to collapse
That's becoming an unhealthy habit of mine, I almost wrote that in my English exam in January...
Those don't look like MAO chips. I think it's just dust/powder that's stuck to the MAO. Have you tried wiping it with a soft damp cloth?
djsubtronic said:
Those don't look like MAO chips. I think it's just dust/powder that's stuck to the MAO. Have you tried wiping it with a soft damp cloth?
Click to expand...
Click to collapse
Yes I've tried wiping it with a damp cloth but it doesn't do anything
lonegunman0 said:
Yes I've tried wiping it with a damp cloth but it doesn't do anything
Click to expand...
Click to collapse
That sucks. From my experience your only solution is to buy a replacement housing and swap it. I can understand your reluctance though, as the phone is so new. You'll learn to live with it in time, I'm sure.
djsubtronic said:
That sucks. From my experience your only solution is to buy a replacement housing and swap it. I can understand your reluctance though, as the phone is so new. You'll learn to live with it in time, I'm sure.
Click to expand...
Click to collapse
This is only the minor issue. Ever since I got my original handset replaced by HTC it seems to show these large block pixels which are most visible when I'm watching videos on Youtube. Don't know whether anyone else has had this problem.
Hello everyone,
my Photon Q fell two days ago and since nothing really happened except that the slider mechanism feels more lose than before, I wanted to ask you guys if 1) with your phone it is the same or 2) do you have an idea how to make it "tight" again?
I opened the phone but couldn't really find out what causes this gap on the left side (when the phone is closed and you are looking at the front). Even it's cosmetic (for some ) it bugs me a lot
Thanks
I've got the same issue, but I thought it could be an issue caused by a fall of the Photon Q.
Loader009 said:
I've got the same issue, but I thought it could be an issue caused by a fall of the Photon Q.
Click to expand...
Click to collapse
So yours fell too? Its probably due to the fall
Sent from my XT897 using xda app-developers app
Mine has been like this since day one. Thought it was just crappy manufacturing. MUCH more loose compared to my old Epic4g
judogti said:
Mine has been like this since day one. Thought it was just crappy manufacturing. MUCH more loose compared to my old Epic4g
Click to expand...
Click to collapse
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Solust said:
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Click to expand...
Click to collapse
Yes, I think so too. Before the drop it fit nicely...Hmm...but noone knows what to do to get it like that again?
Sent from my XT897 using xda app-developers app
I'm not experienced in hardware repair or mods, but if you can separate the two parts of the phone it looks like it has a single hinge with two rails for the slide mechanism. I don't think those would be damaged based on your pictures but there are also two pieces of metal, one on each side of the display connector. My bet would be that one of those got dented. The two pieces seem to be used as a stopping point for the slide as well as distancing/orienting the display.
Solust said:
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Click to expand...
Click to collapse
Nah, Im less than thrilled with this phone, I hope it dies soon and I'll switch models. I love having a slider but there are too many disappointments with this one looks like I'll have to go with an S3 or S4.
judogti said:
Nah, Im less than thrilled with this phone, I hope it dies soon and I'll switch models. I love having a slider but there are too many disappointments with this one looks like I'll have to go with an S3 or S4.
Click to expand...
Click to collapse
Congratulations. You came to say that you don't like this phone and happened to bring nothing to this conversation. We won't miss you.
Solust said:
I'm not experienced in hardware repair or mods, but if you can separate the two parts of the phone it looks like it has a single hinge with two rails for the slide mechanism. I don't think those would be damaged based on your pictures but there are also two pieces of metal, one on each side of the display connector. My bet would be that one of those got dented. The two pieces seem to be used as a stopping point for the slide as well as distancing/orienting the display.
Click to expand...
Click to collapse
Thanks, Solust, for your ideas. I've been thinking the same. I inspected both of them, when I opened the phone and one felt a little lose. Not as lose as the upper part of the phone feels now, though. Can you confirm that it are those things you were mentioning?
oTToToTenTanz said:
Thanks, Solust, for your ideas. I've been thinking the same. I inspected both of them, when I opened the phone and one felt a little lose. Not as lose as the upper part of the phone feels now, though. Can you confirm that it are those things you were mentioning?
Click to expand...
Click to collapse
At this point I do think it is beyond me and I'm a bit surprised someone more familiar with hardware hasn't stepped in yet. Might be worth a try PMing someone involved in the SIM mod.
The two metal pieces I was thinking of are on the keyboard portion of the phone. On the back of the display portion they create a mild groove the same size as the groove for the rails. One groove is left halfway up the phone and the other between that groove and the top of the phone. When the phone is together the display cable fits perfectly between them.
I'm sorry, all I can really do is speculate. I really don't know enough about this sort of thing. I may be mistaken as to what these parts are.
Solust said:
At this point I do think it is beyond me and I'm a bit surprised someone more familiar with hardware hasn't stepped in yet. Might be worth a try PMing someone involved in the SIM mod.
The two metal pieces I was thinking of are on the keyboard portion of the phone. On the back of the display portion they create a mild groove the same size as the groove for the rails. One groove is left halfway up the phone and the other between that groove and the top of the phone. When the phone is together the display cable fits perfectly between them.
I'm sorry, all I can really do is speculate. I really don't know enough about this sort of thing. I may be mistaken as to what these parts are.
Click to expand...
Click to collapse
I think it is pretty impossible to fix a dent in the hinge, right? But would that http://www.ebay.com/itm/MOTOROLA-PH...e_Replacement_Parts_Tools&hash=item20d0b14dc6 fix my problems?
^ I'm pretty sure it wouldn't. My Q is suffering from the very same problem, though I got over it quite a while ago since it's kind of a 'minor' issue I actually have the same exact part sitting on my desk right now, my listing on eBay to sell it just ended haha. I could test it out for you, if you really would like to know.
Sent from my XT897 using Tapatalk 2
xLoveHateLegend said:
^ I'm pretty sure it wouldn't. My Q is suffering from the very same problem, though I got over it quite a while ago since it's kind of a 'minor' issue I actually have the same exact part sitting on my desk right now, my listing on eBay to sell it just ended haha. I could test it out for you, if you really would like to know.
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Haha, interesting I'm not so sure either, but I'm eager to do it lol. Hence I bought this yesterday night, although I'm not even sure how this hinge is fixed on the phone (glue etc?). I'd sure like to know how u fare, fella!^^
Sent from my XT897 using xda app-developers app
There's no glue, it just slides under these 3 little slots on the left side
Sent from my XT897 using Tapatalk 2
xLoveHateLegend said:
There's no glue, it just slides under these 3 little slots on the left side
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
So why didn't u try it?^^
Sent from my XT897 using xda app-developers app