Related
Hi guys , I just updated my honor 6 to android 5.1 and wanted to root it , but its very very dificult to do . I decided to downgrade to 4.4.2 and easily root by kingroot . The problem is hwauei site don't allow me to downlaod the downgrade package b500 . Anyone can upload it here ???? One more thing , after downgrading to b500 , can I downgrade to build b393?? Because I have it downloaded.
Anyone help me please!!!!!
@Soltane_Ghamha2000 is your build official? Mine IS (b510) and I cannot downgrade anymore!! Those b500 downgrade packages only work in beta builds.
This lollipop update is dud. More bloatware, heating up, lag etc.
If you know a way to get back to 4.4.2 (any build) please let me know. This emui 3.1 makes me want to go back to 2.3!
Same here. Would like to downgrade so i can use kingroot and go back to CM11.
Same here. I just installed B532 on my L02 and I have a lot of problems with this rom. I just want to return back to CM11.
Can't we simply install CM11? Will the phone brick? @codeworkx
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268
cheptii said:
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268
Click to expand...
Click to collapse
This wont work. You will end up bricking your device. Dont do this
---------- Post added at 06:50 AM ---------- Previous post was at 06:47 AM ----------
Understand that lollipop is fundamentally different from KK. So just a fastboot will render your phone bricked. Only way to do it is to use a downgrade package (try phantomath.xyz).
You can download the downgrade package here: http://consumer.huawei.com/ru/support/products/downloads/h60-l4-ru.htm
The downgrade works with local update when i place in in dload. But after downgrading i still have 5.1.1. and EMUI 3.1
kan_ranga said:
This wont work. You will end up bricking your device. Dont do this
---------- Post added at 06:50 AM ---------- Previous post was at 06:47 AM ----------
Understand that lollipop is fundamentally different from KK. So just a fastboot will render your phone bricked. Only way to do it is to use a downgrade package (try phantomath.xyz).
Click to expand...
Click to collapse
I already did it with the B521 the European version , i downgraded to the B374 and installed the B507 , so im sure it works
westlandmb said:
The downgrade works with local update when i place in in dload. But after downgrading i still have 5.1.1. and EMUI 3.1
Click to expand...
Click to collapse
after you install 4.4.2 with local update again
Update failure.
What i did:
- Local update "H60-L04C900B521" --> Succesfull
- Local update "H60_L04V100R001C900B500_Firmware_rollback_version_(EMUI3.1 to EMUI3.0)" --> Probaly succesful but after the update i had still EMUI 3.1. B500.
- Local update "H60-L04_EMUI3.0_V100R001C00B370" --> Update failure. Still have B500 rom.
If i get 4.4.2 i can use kingroot and honorTuner to unlock my bootloader, root and flash the phone. On 5.1.1. i'm unable to do it, because my unlock bootloader code will come in 14 days according to Huawei. But even after 14 days i still get the same message by asking for a unlocking code.
This worked for me.
http://forum.xda-developers.com/showpost.php?p=63150317&postcount=24
I recently upgrade my MT7 L09 from kk b120 to lollipop b324, but i didn´t like it for so many reasons, then i decided to downgrade to kk...
I had a stock screen grid 5x5 settings before and after up/downgrade... But to make sure that everything was ok i did a factory reset with volume up and power button... after that i got a big screen with only 4x5 screen grid, it is not anymore available 5x5 in settings...
someone knows what happened??? why does settings desapear??? or if i have installed the wrong firm??
I have tested lollipop 5.1 b324, kk b120 european region, kk b127 general version, kk b137... And no one of those firm has screen grid 5x5 available...
Everything is stock...
Or... How to get the code to unlock the bootloader without sending an email to huawei service, I'm still looking for some post abt it... i realized that they are not providing the code too easy anymore...
:::SOLVED:::
I just found this cust file (to fix cust fail when flashin, gesture control, and apparently to setup screen grid 5x5 *-* all what i did is to put the "cust file" in the same directory than update.app [dload folder] and flash them both at same time with 3 keys...
I will post the link but i am not sure if i am able to post link, if not be free to ask by MP...
https://www.dropbox.com/s/1zr2uuezxhts1hn/Huawei Mate 7 Rollback.zip?dl=0
Wilky03 said:
I recently upgrade my MT7 L09 from kk b120 to lollipop b324, but i didn´t like it for so many reasons, then i decided to downgrade to kk...
I had a stock screen grid 5x5 settings before and after up/downgrade... But to make sure that everything was ok i did a factory reset with volume up and power button... after that i got a big screen with only 4x5 screen grid, it is not anymore available 5x5 in settings...
someone knows what happened??? why does settings desapear??? or if i have installed the wrong firm??
I have tested lollipop 5.1 b324, kk b120 european region, kk b127 general version, kk b137... And no one of those firm has screen grid 5x5 available...
Everything is stock...
Or... How to get the code to unlock the bootloader without sending an email to huawei service, I'm still looking for some post abt it... i realized that they are not providing the code too easy anymore...
:::SOLVED:::
I just found this cust file (to fix cust fail when flashin, gesture control, and apparently to setup screen grid 5x5 *-* all what i did is to put the "cust file" in the same directory than update.app [dload folder] and flash them both at same time with 3 keys...
I will post the link but i am not sure if i am able to post link, if not be free to ask by MP...
https://www.dropbox.com/s/1zr2uuezxhts1hn/Huawei Mate 7 Rollback.zip?dl=0
Click to expand...
Click to collapse
hi Wilky, i have the same problems with my mate 7. did u flash it when u in lollipop or kitkat? and do u have any problem with the phone signal? tks mate
kakahoang said:
hi Wilky, i have the same problems with my mate 7. did u flash it when u in lollipop or kitkat? and do u have any problem with the phone signal? tks mate
Click to expand...
Click to collapse
Hi bro... i flash it with the update.app of 34mb and cust file at same time to downgrade so i got b300 on my m7... then i flash it with b120 and cust file at the same time then i got b120kk in my m7 and everything is working... even 4g signal...
can you post the link again ? i have mt-lt10 y buy it used and it have install firmware 4 mt7-l09 and i whant fixed. sorry 4 my english
To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.
How is it
omair.anwer said:
To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.
Click to expand...
Click to collapse
What about themes app is it work and are there a rollback package if you didn't like it
First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?
Mohammad.b said:
What about themes app is it work and are there a rollback package if you didn't like it
Click to expand...
Click to collapse
Theme app is working.
omair.anwer said:
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.
Click to expand...
Click to collapse
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk
talvigi said:
First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?
Click to expand...
Click to collapse
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
If you are on android 7 you need to first download the roll back package of the "version component version" showing in veneer info and flash it, then flash the same version android 6 latest package. Then use the firmware finder send to update method to get back to your real version either andoid 6 or android 7 as your prefer.
I have seen c185 is used used for middle east market.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.
omair.anwer said:
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.
Click to expand...
Click to collapse
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
omair.anwer said:
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk
Click to expand...
Click to collapse
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you should write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.
talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
Click to expand...
Click to collapse
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.
talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.
Click to expand...
Click to collapse
@talvigi its a second part flash file you need to flash in order to get full functionality on android 7. This file is only needed if android 7 update is made using dload. This will also give your correct version in about and updater app. If update is made using firmware finder sent to updater method than this file is automatically downloaded and flashed in updating process. I got this file from the updater folder.
omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
@Omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks
talvigi said:
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
Click to expand...
Click to collapse
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.
omair.anwer said:
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.
Click to expand...
Click to collapse
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? Thanks
talvigi said:
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks
Click to expand...
Click to collapse
Exactly that is very imp. Full OTA.
omair.anwer said:
Exactly that is very imp. Full OTA.
Click to expand...
Click to collapse
Thanks man, thanks a lot.
I will inform you guys, what happen to me and my lovely Honor 6xxxxxxx
Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )
omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Thank you for the link. I unzipped "update_data_full_BLN-L21_hw_meafnaf.zip" and dropped the content in dload folder on SD card. Flashed from Engineering mode menu and everything on the phone works correctly now.
I was trying to locate this file "update_data_full_BLN-L21_hw_meafnaf.zip" by myself with no success. i'm curious how did you find it and is there a link for this file somewhere on hicloud servers. I see that for EU version off the phone this file is available for direct download from there.
Anyways, you did amazing job and your post will help many people I guess. Thank you!
P.S. I noticed after I posted my remarks that you've got "update_data_full_BLN-L21_hw_meafnaf.zip" from your Updater App folder - great job and hopefully somebody will find the link for direct download from hicloud servers
Renaf2 said:
Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )
Click to expand...
Click to collapse
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.
omair.anwer said:
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.
Click to expand...
Click to collapse
Thank you very much but finally i resolved alone my problem
I'm now with my Stock Rom Debloated My Bank app convert to system app directly unrooted ... i'm ready when Nougat Final update is out
Can i relock my bootloader with this command prompt ? : fastboot oem relock "my 16 digit code" ???????? No can't relock bootloader with command prompt but if you reflash stock rom with update method you relock bootloader resolved
Any MHA-L29 user with C185 got oreo update as of yet ? Firmware finder showed some, but they are not approved for installation.
I updated my phone with update 110949 dated 31/12/2017.
OTA PUSHED for europeen L29 and L09 C432 release B363
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
OTA only for europeen region C432 and release B363
Yes, I have a Middle East unlocked variant of Mate9. Last night, I got tired og Huawei's lazy and slow updater, so I downloaded Firmware Finder and it offered me the update, as soon as I changed my DNS setings.
Right now, its downloading a 2.67 GB OTA update. Its version number is coming up as 8.0.0.370 (C185).
HTH
I have downloaded the system update thru the Huawei official update tool, and both times after it downloads the large file, it tries to verify and refuses to install it, saying that Authentication Failed. This package is unauthorised and will be deleted. Please download and install an authorised installation package.
Any ideas, how to update to Oreo 8.0 ?
Thanks.
Firmware finder can only install if your IMEI is approved for update.
B370 is most likely too new to be approved yet for anyone.
@bym007 you can use HWOTA, which requires unlocking bootloader (can be locked again, so it says Lock and not relocked).
If you are on Nougat: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
If you want to update Oreo - Oreo: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Or paid alternatives.
Thanks for your comment. I didn't how to check for eligibility. I have since found the latest Oreo update 8.0.0.360, and then updated my phone.
My phone was also showing strange lags and unpredictable behaviours here and there, so I used the opportunity to factory reset the phone after applying the update.
I've downloaded and installed Oreo build 371 with no issues on my Mate 9 MHA-L29C185.
Please I need help, last week I installed EMUI 9.0.1.158 on my MHA-L29 but I wasn't so impressed so I rolled back to 8.0.0.379 (by using HiSuite) and now I changed my mind but can't get to update anymore. No updates show up on System Update, HiSuite or HiCare. I deleted data & cache from System Update, even did a factory reset but nothing changed. How is it possible? I hope you guys can help me. Thank you.
I hv the same issue ,when I received the update notifications, I didn't update immediately and after few days it gone and I never get any notifications .please help.
mauromazzo said:
Please I need help, last week I installed EMUI 9.0.1.158 on my MHA-L29 but I wasn't so impressed so I rolled back to 8.0.0.379 (by using HiSuite) and now I changed my mind but can't get to update anymore. No updates show up on System Update, HiSuite or HiCare. I deleted data & cache from System Update, even did a factory reset but nothing changed. How is it possible? I hope you guys can help me. Thank you.
Click to expand...
Click to collapse
your make downgrade Oreo and now need Pie again??? why
aureliomilitao said:
your make downgrade Oreo and now need Pie again??? why
Click to expand...
Click to collapse
I got delayed push notifications but then I realized it was my routers fault, so I want to install it again.
Firmware Finder says 9.0.1.158(C432) is not approved for installation but I had installed it before... This is weird
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
---------- Post added at 12:35 AM ---------- Previous post was at 12:34 AM ----------
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
thanks
Necrodaemon said:
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
---------- Post added at 12:35 AM ---------- Previous post was at 12:34 AM ----------
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Click to expand...
Click to collapse
ıts work for me
same story as mine. no more update and noti about new software update.
lawong said:
same story as mine. no more update and noti about new software update.
Click to expand...
Click to collapse
9.0.1.158 is no longer approved (at least for me). I guess we have to wait until 9.0.1.179 full OTA comes out...
same story, cannot upgrade to A9
will try with FF and modded hisuite, cause I was successful with Honor 10 today upgrading to FW 222. It works, but sometimes says no internet connection. It requires many tries.
Already have new firmware android pie dun give up guys.
Ing.King said:
will try with FF and modded hisuite, cause I was successful with Honor 10 today upgrading to FW 222. It works, but sometimes says no internet connection. It requires many tries.
Click to expand...
Click to collapse
luck2ang said:
Already have new firmware android pie dun give up guys.
Click to expand...
Click to collapse
Hi...the part with moving files is unclear, or was it translated from russian by google? I have already HiSuite latest version installed , so should I uninstall it and install the one dowloaded (older version) ? thanks
luck2ang said:
Already have new firmware android pie dun give up guys.
Click to expand...
Click to collapse
You receive the OTA?
I'm stuck on 8.0.0.376, do I need to upgrade via the spoof method to "latest" 8.0.0.xxx THEN try a full/partial 9.0 OTA?
Ive tried partial OTAs from 9.0 that are approved = hisuite says update failed.
Ive tried 1 full OTA from 9.0 that is approved = hisuite downloads passes all ok, phone reboots = verification failed (I assume phone is NOT connecting to internet on eRecovery phase right? but you never know. Since I'm only spoofing on windows not on the router).
Norgesjam said:
Hi...the part with moving files is unclear, or was it translated from russian by google? I have already HiSuite latest version installed , so should I uninstall it and install the one dowloaded (older version) ? thanks
Click to expand...
Click to collapse
Yes uninstall old one (backups if any won't be deleted) and reinstall with instructions.
yes but i revert back. many bugs.after i revert all become normal still can update dun worry
Same here, i updated to 9 then hated the bugs so used hisuite to downgrade, then i got s10e, since the mate 9 is my secondary phone now, i need the butter like smoothness of emui 9
Sent from my MHA-L29 using Tapatalk
New regions for 9.0 on the Mate 9 has been released at the start of June 3rd. In the next week, I guess we'll see who gets it
9.0.1.191(C432) has been approved for installation on FF, so the update should arrive during the coming days/weeks.
9.0.1.191 (C432) is approved for installation, I tried install via the firmware finder eRecovery method but the udpate stuck at downloading 0%
---------- Post added at 17:59 ---------- Previous post was at 17:23 ----------
It's quite strange that Middle East variant i.e. C185 has received the update since March and the Europe region is still waiting for the update. Whereas previously it was totally opposite.
Update: After wasting an hour and download the approved 9.0.1.191 via eRecovery from Firmware Finder, the package gave "Package Authentication Failed Error" on 99%.