Couldn't boot in recovery...and stuck on LG Logo. Tried tot method, funny cuz al i did use this method to flash stock ROM several time (yes checked for corrupted download)somehow it's not working now it stuck on ready.No kdz file available for D800(at&t).Also tried short Circuit and qhusb btw all step cleared but last one where to push recovery fails if try to push openrecovery but stock does pass then it will not boot in recovery. Really fed up.No avail of any real help.
Sent from my LG-H818 using Tapatalk
try flashing again tot
Buglol said:
try flashing again tot
Click to expand...
Click to collapse
Yeah,, already tried atleast 10 times,,
Sent from my LG-H818 using Tapatalk
almass said:
Yeah,, already tried atleast 10 times,,
Sent from my LG-H818 using Tapatalk
Click to expand...
Click to collapse
lg flash tool stays at ready when you set com port of your lg device to 41~45 and browse to tot file and dll. if yes then only you have to unplug and plug in again while being in download mode (do not power off) to start flashing process. I think you are missing this.
Buglol said:
lg flash tool stays at ready when you set com port of your lg device to 41~45 and browse to tot file and dll. if yes then only you have to unplug and plug in again while being in download mode (do not power off) to start flashing process. I think you are missing this.
Click to expand...
Click to collapse
No. I have flashed stock ROM4-5 times before this but somehow this time it isn't working
Sent from my LG-H818 using Tapatalk
almass said:
No. I have flashed stock ROM4-5 times before this but somehow this time it isn't working
Sent from my LG-H818 using Tapatalk
Click to expand...
Click to collapse
I have carefully considered your steps.. Last resort was laf.img, aboot.img etc though i sailed through all step smoothly but last one where we push recovery fails, idk..., i put variant recovery files but no luck.
Sent from my LG-H818 using Tapatalk
Buglol said:
lg flash tool stays at ready when you set com port of your lg device to 41~45 and browse to tot file and dll. if yes then only you have to unplug and plug in again while being in download mode (do not power off) to start flashing process. I think you are missing this.
Click to expand...
Click to collapse
I have carefully considered your steps.. Last resort was laf.img, aboot.img etc though i sailed through all step smoothly but last one where we push recovery fails, idk..., i put variant recovery files but no luck.
almass said:
I have carefully considered your steps.. Last resort was laf.img, aboot.img etc though i sailed through all step smoothly but last one where we push recovery fails, idk..., i put variant recovery files but no luck.
Click to expand...
Click to collapse
Bro I can't help further, hope someone helps you.
Thanks man for keepin up.,,
almass said:
Thanks man for keepin up.,,
Click to expand...
Click to collapse
please try to solve this.
http://forum.xda-developers.com/att-g2/help/amaze-giving-problem-t3237374
Buglol said:
please try to solve this.
http://forum.xda-developers.com/att-g2/help/amaze-giving-problem-t3237374
Click to expand...
Click to collapse
I am out of town, have very limited data, be home on sunday will help you with this, i am little familar with this problem...
Related
Hello,
i am trying to install Custom Rom. For Ref. this Rom http://forum.xda-developers.com/showthread.php?t=1529777 but when i have Press Install it From SD Card than My phone Restarted and want Come back, its Stuck on LG Logo.
i have tried all the things Like Press Home+Power+Volume Down button Button but its not Working Please Help me to Solve this Problem.
Reflash stock rom using KDZ Updater
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Reflash stock rom using KDZ Updater
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Can you Tell me how to Do it?
Search for the method of flashing stock firmware using KDZ. I'm sure you'll find it. When you do it, try getting into emergency mode by pressing back+vol up+power, when the phone is switched off.
The issue has been discussed in so many threads, and I'm sure you'll find the solution if you search. All the best!
And next time you flash a ROM, make sure you wipe everything before flashing the zip file. Also make sure that your baseband is as per the ROM requirement.
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
IKnowIRock! said:
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
Click to expand...
Click to collapse
Try Factory Reset(volume up or volume down + home + power button)
Sohaard said:
Try Factory Reset(volume up or volume down + home + power button)
Click to expand...
Click to collapse
doesnt work i dont know whether my keys are broken..nothing works everything was fine before this happened
Try LGMDP
I suggest that you use KDZ once again, and if it's not helping, try this:http://forum.xda-developers.com/showthread.php?t=1324105
It uses LGMDP instead of KDZ to reflash the firmware. Please post the feedback if you do try out this method.
aravindsagar said:
I suggest that you use KDZ once again, and if it's not helping, try this:http://forum.xda-developers.com/showthread.php?t=1324105
It uses LGMDP instead of KDZ to reflash the firmware. Please post the feedback if you do try out this method.
Click to expand...
Click to collapse
Yes this method works! I tried everything but nothing worked.finally tried this and it worked!
Sent from my LG-P500 using XDA
IKnowIRock! said:
Yes this method works! I tried everything but nothing worked.finally tried this and it worked!
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Happy to help. Hope you've thanked the creators of that thread.
just wanna ask
IKnowIRock! said:
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
Click to expand...
Click to collapse
how did you use KDZ? please
mobilenews said:
Hello,
i am trying to install Custom Rom. For Ref. this Rom http://forum.xda-developers.com/showthread.php?t=1529777 but when i have Press Install it From SD Card than My phone Restarted and want Come back, its Stuck on LG Logo.
i have tried all the things Like Press Home+Power+Volume Down button Button but its not Working Please Help me to Solve this Problem.
Click to expand...
Click to collapse
Get another rom .. press vol up+ home+ power to go into recovery .. mount sd .. move rom zip file to it .. and install zip from sd via recovery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
im having a boot loop problem after flashing official ics for SU760. im stuck on boot animation.
To those who have tried updating thier SU760 to ICS. How did you do it.? what is the proper way to flash KDZ.?
My previous version was V20F and the ICS version is V29B, am I doing right.?
please advice.
Go to recovery and do factory reset.
Sent from my LG-P920 using xda app-developers app
iodak said:
Go to recovery and do factory reset.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
how.? i can't access it using volume down+3d button+power on only blank screen appears.
i've tried also volume down only, didn't work.
did you take some patience? my recovery sometimes shows up after 3 mins.
only do pwr + vol-
until you see lg logo. then let go. then just wait some time. it can take long.
Try (vol-up+3D+pwr) it can do directly factory reset.
paultje162 said:
did you take some patience? my recovery sometimes shows up after 3 mins.
only do pwr + vol-
until you see lg logo. then let go. then just wait some time. it can take long.
Click to expand...
Click to collapse
im not sure if I've waited long enough but i guess that was 5 mins or more. I will try it again.
I have found some info from other site. They say, they have a patch for V29B.
Posted by "bachcom" post number "2136"
http://translate.google.com/translate?hl=en&sl=vi&u=http://www.tinhte.vn/threads/1122939/page-107&prev=/search%3Fq%3D/swdata/RNDTESTSW/LGSU760/SKT/%26hl%3Den%26biw%3D1280%26bih%3D656%26prmd%3Dimvns&sa=X&ei=id5EUKP7EMHOrQeNkICwDg&ved=0CC4Q7gEwAQ
http://www.tinhte.vn/threads/1122939/page-107
Do not flash that! It is pached with CWM and if bootloader is locked it will not boot and it id posible that is not pathed right.
Sent from my LG-P920 using xda app-developers app
iodak said:
Do not flash that! It is pached with CWM and if bootloader is locked it will not boot and it id posible that is not pathed right.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
still stuck at boot animation of ICS. I can't even access recovery menu.
I've noticed when accessing recovery menu, sometimes a white screen appears with the LG logo and the word LG Service beside is a bidirectional arrow, i can't understand bec. it is in korean.
Similya said:
still stuck at boot animation of ICS. I can't even access recovery menu.
I've noticed when accessing recovery menu, sometimes a white screen appears with the LG logo and the word LG Service beside is a bidirectional arrow, i can't understand bec. it is in korean.
Click to expand...
Click to collapse
Sent pm
Sent from my LG-P925 using xda app-developers app
Similya said:
im having a boot loop problem after flashing official ics for SU760. im stuck on boot animation.
To those who have tried updating thier SU760 to ICS. How did you do it.? what is the proper way to flash KDZ.?
My previous version was V20F and the ICS version is V29B, am I doing right.?
please advice.
Click to expand...
Click to collapse
OK let me tell you how i flashed V29B to iTTi's SU760
Before flashing i told iTTi to get into CWM and fully erase cache, dalvik , data and system/factory reset.
After that i extracted KDZ file with lg extract tool and created BIN and FLS files.
I used LG Flashtool to flash these two files to iTTi's SU760
After flashing files the phone started and did some work on its own for 5-10 min and then after reboot it was ready. (i couldnt see iTTi told me that)
Similya said:
how.? i can't access it using volume down+3d button+power on only blank screen appears.
i've tried also volume down only, didn't work.
Click to expand...
Click to collapse
Yes iTTi also told me that he cant get into RECOVERY MENU.
If you need more help just ask.
xbsall said:
OK let me tell you how i flashed V29B to iTTi's SU760
Before flashing i told iTTi to get into CWM and fully erase cache, dalvik , data and system/factory reset.
After that i extracted KDZ file with lg extract tool and created BIN and FLS files.
I used LG Flashtool to flash these two files to iTTi's SU760
After flashing files the phone started and did some work on its own for 5-10 min and then after reboot it was ready. (i couldnt see iTTi told me that)
Yes iTTi also told me that he cant get into RECOVERY MENU.
If you need more help just ask.
Click to expand...
Click to collapse
Oh no I didn't erase and do a factory reset. I was thinking that flashing kdz will automatically erase and format everything.
How did you create Bin and FLS files.?
Can you upload the BIN and FLS files that you already created.?
Right now, I'm trying to go back to V20f, I hope it will work and it will boot.
Try to go back then do what xball told u
Sent from my LG-P925 using xda app-developers app
Similya said:
Oh no I didn't erase and do a factory reset. I was thinking that flashing kdz will automatically erase and format everything.
How did you create Bin and FLS files.?
Can you upload the BIN and FLS files that you already created.?
Right now, I'm trying to go back to V20f, I hope it will work and it will boot.
Click to expand...
Click to collapse
Check back here in 10minutes . I ll give you some files that you will need and a step by step guide.
---------- Post added at 05:45 AM ---------- Previous post was at 05:05 AM ----------
first download this http://d-h.st/V5U
extract it and you will find lg extract , lgflashtool (after you install lgflashtool replace the lgflashtool.exe with the one from rar file) and also copy su_110622.dll into lg flashtool directory
Guide for lgextract is here
http://forum.xda-developers.com/showpost.php?p=24164378&postcount=23
in order to use lg flashtool follow this guide (you dont need to change your cable)
http://forum.xda-developers.com/showthread.php?t=1244490
xbsall said:
Check back here in 10minutes . I ll give you some files that you will need and a step by step guide.
---------- Post added at 05:45 AM ---------- Previous post was at 05:05 AM ----------
first download this http://d-h.st/V5U
extract it and you will find lg extract , lgflashtool (after you install lgflashtool replace the lgflashtool.exe with the one from rar file) and also copy su_110622.dll into lg flashtool directory
Guide for lgextract is here
http://forum.xda-developers.com/showpost.php?p=24164378&postcount=23
in order to use lg flashtool follow this guide (you dont need to change your cable)
http://forum.xda-developers.com/showthread.php?t=1244490
Click to expand...
Click to collapse
thank you so much, now my phone is ok.
i will try to root and install CWM on it. Hope to have success.
Check partitions on phone you will probably have to mod cwm. Thay added some new partitions. Swap is one of them.
Sent from my LG-P920 using xda app-developers app
for rooting try goroh_kuns apk with the p880 script
more info here
http://forum.xda-developers.com/showthread.php?t=1818502
xbsall said:
for rooting try goroh_kuns apk with the p880 script
more info here
http://forum.xda-developers.com/showthread.php?t=1818502
Click to expand...
Click to collapse
it didn't work.
Take the batter out , chuck the battery back in
hold down power + 3d button and u wud reach android recovery mode not CWM and clear all data and factory reset wipe and u shud be good
For Su-760 the boot sequence is power +3d button , volume button is not required
BTW:--
I also have su-760 but when i try to do upgrade it says latest version , and also same problem over wifi , lg flash tool somehow cannot upgrade to ICS from gingerbread at all ..
suhailpuri said:
BTW:--
I also have su-760 but when i try to do upgrade it says latest version , and also same problem over wifi , lg flash tool somehow cannot upgrade to ICS from gingerbread at all ..
Click to expand...
Click to collapse
That's because it hasn't officially been released.
Sent from my LG-P920 using xda app-developers app
Below are the I.C.S. V29C AND V30G kdz's for the SU760.
https://www.dropbox.com/sh/5y40s26ox2outnp/xmaXKVR6r6
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Mohan211 said:
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Click to expand...
Click to collapse
wiping cache shall be helped you.
re-try to re-flash the cwm..maybe you do it wrong.
H.Style86 said:
re-try to re-flash the cwm..maybe you do it wrong.
Click to expand...
Click to collapse
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Mohan211 said:
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Click to expand...
Click to collapse
What android driver?
Sent from my SCH-I500 using Tapatalk 2
Nevermind I fixed it. Not too sure how but it worked.
Thanks anyway guys!
ndaryruro feudal
Sometimes it's just enough to take out the battery and put it in again
Stuck at boot logo
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
SumitBishnoi said:
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
Click to expand...
Click to collapse
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
No ,Only Auto Reboot and F. Reset Time were checked
SumitBishnoi said:
No ,Only Auto Reboot and F. Reset Time were checked
Click to expand...
Click to collapse
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Stuck at boot logo
bbrad said:
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot . I just flashed back after clearing cache and it worked fine. You people rocks.
Trying to load CM11 M1 and now in a boot loop. Haven't been able to copy the new image over yet. Unable to get into recovery mode, just the stock 'four circles' spinning. Can anyone help? Thanks
Can you get to Fastboot?
Sent from my Nexus 5 using xda app-developers app
Not fubar yet buddy. Get into fastboot and proceed from there. A quick search should provide ample answers. Give me 5 and I'll write you a step by step if need be.
On my phone. Limited with links and all.
Sent from my Nexus 5
Same things been happening to me all day trying to get it to load but it is always stuck on a loop on the load screen.
To get out from it ive been disconnecting from computer and holding power off, the cyanogenmod will auto start FOR SOME REASON but just keep powering off till its dead then start up recovery wipe cache/data etc and restore your backup.
There's another thread on this same issue
Edit, links all wonky
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=526
Click to expand...
Click to collapse
Link no worky.
Neurotica said:
Not fubar yet buddy. Get into fastboot and proceed from there. A quick search should provide ample answers. Give me 5 and I'll write you a step by step if need be.
On my phone. Limited with links and all.
Sent from my Nexus 5
Click to expand...
Click to collapse
Much obliged. I can get into CWM recovery now, just not sure next steps since I don't have a image on the sdcard yet...
jd1639 said:
There's another thread on this same issue
Edit, links all wonky
Click to expand...
Click to collapse
This link?
http://forum.xda-developers.com/showthread.php?t=2589940
Harry GT-S5830 said:
Can you get to Fastboot?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
In Fastboot... now not sure what's next. Can't adb push the new image....
theesotericone said:
This link?
http://forum.xda-developers.com/showthread.php?t=2589940
Click to expand...
Click to collapse
That link works, thanks. Don't know why I didn't see it in my search. Following steps....
argh, driver issue now. Installed the updated USB drivers from the SDK but when I'm in CWM recovery mode I had a banged out device. Had to install the naked drivers... Boy, this is fun. :silly:
Tried every build available aswell tried both manual root/Su and CF Auto root but no combination will it load, will also do a system restore on my main rig after messing around with all the random driver installations.
Try it on a spare laptop, you never know, might get lucky.
I did notice on the log file in CWM after installation there are 2 file that cannot be installed, I do not know if that has anything to do with it or not, looks like some sort of addon folder that cant be located. Only other thing I can think of is using a more stable version of CWM.
Try twrp and see if you have the same issues. http://d-h.st/YpG. Just flash it in cwm.
If all else fails, flash a factory system image and then format /data and the cache partitions.
This will get your device working while you learn more about how to flash it, and recover it if necessary.
Sent from my Nexus 5 using Tapatalk
rrsarge said:
In Fastboot... now not sure what's next. Can't adb push the new image....
Click to expand...
Click to collapse
You flash the stock image, try extract the files and execute the flash-all batch file.
Can someone point me to the right direction to downgrade from 20k to a version I can root?
My battery life is terrible.
Sent from my LG-H830 using Tapatalk
I downgraded from 20k to 20a using the thread below.
https://forum.xda-developers.com/tm...ock-h830-20a-rom-flashable-zips-imgs-t3511294
I followed these instructions in that thread:
LGUP Directions:
1. Download the following three(3) files on Windows PC (Windows only. Mac/Linux? Use a Windows Virtual Machine):
LGUP_Lab_Frame_Ver_1_14.msi
UPPERCUT
Latest LG Windows PC drivers
2. Download KDZ. Install LGUP 1.14 and LG USB drivers if not already installed.
3. Turn OFF device then place in Download Mode: Hold Volume Up while plugging in USB cable.
4. Double-click the UPPERCUT.exe to load LGUP...
How-to use LGUP and flash software:
Select device
Check BIN File box under File Type then select KDZ file
Check "Upgrade" box in center of program to keep data. Use "Refurbish" to run a factory reset and wipe all data.
Click START button to flash file to G5 (you may have to close and reopen LGUP before being able to hit Start)
Click to expand...
Click to collapse
HKSpeed said:
I downgraded from 20k to 20a using the thread below.
https://forum.xda-developers.com/tm...ock-h830-20a-rom-flashable-zips-imgs-t3511294
I followed these instructions in that thread:
Click to expand...
Click to collapse
Thank you so much! Will try when I get off work
Sent from my LG-H830 using Tapatalk
HKSpeed said:
I downgraded from 20k to 20a using the thread below.
https://forum.xda-developers.com/tm...ock-h830-20a-rom-flashable-zips-imgs-t3511294
I followed these instructions in that thread:
Click to expand...
Click to collapse
Is it pretty much straight forward?
Sent from my LG-H830 using Tapatalk
Godspeed123 said:
Is it pretty much straight forward?
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
Anyway to get rid of that splash screen at start about the boot loader been unlocked.Plus I don't know how to boot in recovery.
Sent from my LG-D851 using XDA-Developers Legacy app
HKSpeed said:
I downgraded from 20k to 20a using the thread below.
https://forum.xda-developers.com/tm...ock-h830-20a-rom-flashable-zips-imgs-t3511294
I followed these instructions in that thread:
Click to expand...
Click to collapse
Anyway to get rid of that splash screen at start about the boot loader been unlocked.Plus I don't know how to boot in recovery.
Sent from my LG-H830 using XDA-Developers Legacy app
AtrixHDMan said:
I don't know how to boot in recovery.
Click to expand...
Click to collapse
if you're rooted, install a reboot app like the one below:
https://play.google.com/store/apps/details?id=simple.reboot.com
Otherwise try holding volume down + power, or follow this site. You can also try rebooting to bootloader, then select recovery boot.
http://www.android.gs/reboot-recovery-mode-on-lg-g5/
HKSpeed said:
if you're rooted, install a reboot app like the one below:
https://play.google.com/store/apps/details?id=simple.reboot.com
Otherwise try holding volume down + power, or follow this site. You can also try rebooting to bootloader, then select recovery boot.
http://www.android.gs/reboot-recovery-mode-on-lg-g5/
Click to expand...
Click to collapse
I decided to unroot and go back to stock.Couldn't get into recovery with that boot loader splash screen at boot up.Thanks.
Sent from my LG-H830 using XDA-Developers Legacy app