im having a boot loop problem after flashing official ics for SU760. im stuck on boot animation.
To those who have tried updating thier SU760 to ICS. How did you do it.? what is the proper way to flash KDZ.?
My previous version was V20F and the ICS version is V29B, am I doing right.?
please advice.
Go to recovery and do factory reset.
Sent from my LG-P920 using xda app-developers app
iodak said:
Go to recovery and do factory reset.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
how.? i can't access it using volume down+3d button+power on only blank screen appears.
i've tried also volume down only, didn't work.
did you take some patience? my recovery sometimes shows up after 3 mins.
only do pwr + vol-
until you see lg logo. then let go. then just wait some time. it can take long.
Try (vol-up+3D+pwr) it can do directly factory reset.
paultje162 said:
did you take some patience? my recovery sometimes shows up after 3 mins.
only do pwr + vol-
until you see lg logo. then let go. then just wait some time. it can take long.
Click to expand...
Click to collapse
im not sure if I've waited long enough but i guess that was 5 mins or more. I will try it again.
I have found some info from other site. They say, they have a patch for V29B.
Posted by "bachcom" post number "2136"
http://translate.google.com/translate?hl=en&sl=vi&u=http://www.tinhte.vn/threads/1122939/page-107&prev=/search%3Fq%3D/swdata/RNDTESTSW/LGSU760/SKT/%26hl%3Den%26biw%3D1280%26bih%3D656%26prmd%3Dimvns&sa=X&ei=id5EUKP7EMHOrQeNkICwDg&ved=0CC4Q7gEwAQ
http://www.tinhte.vn/threads/1122939/page-107
Do not flash that! It is pached with CWM and if bootloader is locked it will not boot and it id posible that is not pathed right.
Sent from my LG-P920 using xda app-developers app
iodak said:
Do not flash that! It is pached with CWM and if bootloader is locked it will not boot and it id posible that is not pathed right.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
still stuck at boot animation of ICS. I can't even access recovery menu.
I've noticed when accessing recovery menu, sometimes a white screen appears with the LG logo and the word LG Service beside is a bidirectional arrow, i can't understand bec. it is in korean.
Similya said:
still stuck at boot animation of ICS. I can't even access recovery menu.
I've noticed when accessing recovery menu, sometimes a white screen appears with the LG logo and the word LG Service beside is a bidirectional arrow, i can't understand bec. it is in korean.
Click to expand...
Click to collapse
Sent pm
Sent from my LG-P925 using xda app-developers app
Similya said:
im having a boot loop problem after flashing official ics for SU760. im stuck on boot animation.
To those who have tried updating thier SU760 to ICS. How did you do it.? what is the proper way to flash KDZ.?
My previous version was V20F and the ICS version is V29B, am I doing right.?
please advice.
Click to expand...
Click to collapse
OK let me tell you how i flashed V29B to iTTi's SU760
Before flashing i told iTTi to get into CWM and fully erase cache, dalvik , data and system/factory reset.
After that i extracted KDZ file with lg extract tool and created BIN and FLS files.
I used LG Flashtool to flash these two files to iTTi's SU760
After flashing files the phone started and did some work on its own for 5-10 min and then after reboot it was ready. (i couldnt see iTTi told me that)
Similya said:
how.? i can't access it using volume down+3d button+power on only blank screen appears.
i've tried also volume down only, didn't work.
Click to expand...
Click to collapse
Yes iTTi also told me that he cant get into RECOVERY MENU.
If you need more help just ask.
xbsall said:
OK let me tell you how i flashed V29B to iTTi's SU760
Before flashing i told iTTi to get into CWM and fully erase cache, dalvik , data and system/factory reset.
After that i extracted KDZ file with lg extract tool and created BIN and FLS files.
I used LG Flashtool to flash these two files to iTTi's SU760
After flashing files the phone started and did some work on its own for 5-10 min and then after reboot it was ready. (i couldnt see iTTi told me that)
Yes iTTi also told me that he cant get into RECOVERY MENU.
If you need more help just ask.
Click to expand...
Click to collapse
Oh no I didn't erase and do a factory reset. I was thinking that flashing kdz will automatically erase and format everything.
How did you create Bin and FLS files.?
Can you upload the BIN and FLS files that you already created.?
Right now, I'm trying to go back to V20f, I hope it will work and it will boot.
Try to go back then do what xball told u
Sent from my LG-P925 using xda app-developers app
Similya said:
Oh no I didn't erase and do a factory reset. I was thinking that flashing kdz will automatically erase and format everything.
How did you create Bin and FLS files.?
Can you upload the BIN and FLS files that you already created.?
Right now, I'm trying to go back to V20f, I hope it will work and it will boot.
Click to expand...
Click to collapse
Check back here in 10minutes . I ll give you some files that you will need and a step by step guide.
---------- Post added at 05:45 AM ---------- Previous post was at 05:05 AM ----------
first download this http://d-h.st/V5U
extract it and you will find lg extract , lgflashtool (after you install lgflashtool replace the lgflashtool.exe with the one from rar file) and also copy su_110622.dll into lg flashtool directory
Guide for lgextract is here
http://forum.xda-developers.com/showpost.php?p=24164378&postcount=23
in order to use lg flashtool follow this guide (you dont need to change your cable)
http://forum.xda-developers.com/showthread.php?t=1244490
xbsall said:
Check back here in 10minutes . I ll give you some files that you will need and a step by step guide.
---------- Post added at 05:45 AM ---------- Previous post was at 05:05 AM ----------
first download this http://d-h.st/V5U
extract it and you will find lg extract , lgflashtool (after you install lgflashtool replace the lgflashtool.exe with the one from rar file) and also copy su_110622.dll into lg flashtool directory
Guide for lgextract is here
http://forum.xda-developers.com/showpost.php?p=24164378&postcount=23
in order to use lg flashtool follow this guide (you dont need to change your cable)
http://forum.xda-developers.com/showthread.php?t=1244490
Click to expand...
Click to collapse
thank you so much, now my phone is ok.
i will try to root and install CWM on it. Hope to have success.
Check partitions on phone you will probably have to mod cwm. Thay added some new partitions. Swap is one of them.
Sent from my LG-P920 using xda app-developers app
for rooting try goroh_kuns apk with the p880 script
more info here
http://forum.xda-developers.com/showthread.php?t=1818502
xbsall said:
for rooting try goroh_kuns apk with the p880 script
more info here
http://forum.xda-developers.com/showthread.php?t=1818502
Click to expand...
Click to collapse
it didn't work.
Take the batter out , chuck the battery back in
hold down power + 3d button and u wud reach android recovery mode not CWM and clear all data and factory reset wipe and u shud be good
For Su-760 the boot sequence is power +3d button , volume button is not required
BTW:--
I also have su-760 but when i try to do upgrade it says latest version , and also same problem over wifi , lg flash tool somehow cannot upgrade to ICS from gingerbread at all ..
suhailpuri said:
BTW:--
I also have su-760 but when i try to do upgrade it says latest version , and also same problem over wifi , lg flash tool somehow cannot upgrade to ICS from gingerbread at all ..
Click to expand...
Click to collapse
That's because it hasn't officially been released.
Sent from my LG-P920 using xda app-developers app
Below are the I.C.S. V29C AND V30G kdz's for the SU760.
https://www.dropbox.com/sh/5y40s26ox2outnp/xmaXKVR6r6
Related
Hello,
i am trying to install Custom Rom. For Ref. this Rom http://forum.xda-developers.com/showthread.php?t=1529777 but when i have Press Install it From SD Card than My phone Restarted and want Come back, its Stuck on LG Logo.
i have tried all the things Like Press Home+Power+Volume Down button Button but its not Working Please Help me to Solve this Problem.
Reflash stock rom using KDZ Updater
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Reflash stock rom using KDZ Updater
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Can you Tell me how to Do it?
Search for the method of flashing stock firmware using KDZ. I'm sure you'll find it. When you do it, try getting into emergency mode by pressing back+vol up+power, when the phone is switched off.
The issue has been discussed in so many threads, and I'm sure you'll find the solution if you search. All the best!
And next time you flash a ROM, make sure you wipe everything before flashing the zip file. Also make sure that your baseband is as per the ROM requirement.
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
IKnowIRock! said:
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
Click to expand...
Click to collapse
Try Factory Reset(volume up or volume down + home + power button)
Sohaard said:
Try Factory Reset(volume up or volume down + home + power button)
Click to expand...
Click to collapse
doesnt work i dont know whether my keys are broken..nothing works everything was fine before this happened
Try LGMDP
I suggest that you use KDZ once again, and if it's not helping, try this:http://forum.xda-developers.com/showthread.php?t=1324105
It uses LGMDP instead of KDZ to reflash the firmware. Please post the feedback if you do try out this method.
aravindsagar said:
I suggest that you use KDZ once again, and if it's not helping, try this:http://forum.xda-developers.com/showthread.php?t=1324105
It uses LGMDP instead of KDZ to reflash the firmware. Please post the feedback if you do try out this method.
Click to expand...
Click to collapse
Yes this method works! I tried everything but nothing worked.finally tried this and it worked!
Sent from my LG-P500 using XDA
IKnowIRock! said:
Yes this method works! I tried everything but nothing worked.finally tried this and it worked!
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
Happy to help. Hope you've thanked the creators of that thread.
just wanna ask
IKnowIRock! said:
i am having the same problem i flashed the original fw using kdz but then it is stuckked in the android logo please i really do need help
Click to expand...
Click to collapse
how did you use KDZ? please
mobilenews said:
Hello,
i am trying to install Custom Rom. For Ref. this Rom http://forum.xda-developers.com/showthread.php?t=1529777 but when i have Press Install it From SD Card than My phone Restarted and want Come back, its Stuck on LG Logo.
i have tried all the things Like Press Home+Power+Volume Down button Button but its not Working Please Help me to Solve this Problem.
Click to expand...
Click to collapse
Get another rom .. press vol up+ home+ power to go into recovery .. mount sd .. move rom zip file to it .. and install zip from sd via recovery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Check if this thread helps...
forum.xda-developers.com/showthread.php?t=1827723
ROM - Paranoid Android By ByteCode.
Sent via XDA App.
Hello Guyz!
I am again back with a NEW and LATEST and the biggest thing FULLY WORKING CLOCKWORKMOD RECOVERY v6.0.1.2.
THE PRE REQUISITES : 1. ROOTED OPTIMUS 3D MAX
2. TERMINAL EMULATOR ( CAN ALSO DOWNLOAD FROM HERE
Its easy to flash also. Just follow the following steps :
1. Download the cwm6.0.1.2recovery.img from HERE
2. Copy cwm6.0.1.2recovery.img on the ROOT OF THE SDCARD not the External SDCARD ( Root of SDCARD means not in any folder ).
3. Type the following commands in TERMINAL EMULATOR ( You Previously installed ) :-
su
dd if=/sdcard/cwm6.0.1.2recovery.img of=/dev/block/mmcblk0p6 bs=4096
BINGO ALL DONE :good:
Once complete.
Turn off your phone.
1st hold 3d key then volume down button and at last power button.
Keep holding till the LG LOGO appears and leave when it appears.
You will enter the CWM Recovery v6.0.1.2
SEE THE ATTATCHMENTS
touch version ?
Sent from my LG-SU760 using xda app-developers app
fabersantucci said:
touch version ?
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
i doubt he would be able to use the touch version as it has a cost at the app market and then it would be classed as piracy.
Question here....
can this be directly flashed via fastboot?....
://edit//
confirmed working by fastboot flashing.. but capacitive keys dont light up?..
---------- Post added at 03:49 PM ---------- Previous post was at 03:26 PM ----------
nvm
CptK said:
i doubt he would be able to use the touch version as it has a cost at the app market and then it would be classed as piracy.
Question here....
can this be directly flashed via fastboot?....
://edit//
confirmed working by fastboot flashing.. but capacitive keys dont light up?..
---------- Post added at 03:49 PM ---------- Previous post was at 03:26 PM ----------
nvm
Click to expand...
Click to collapse
Touch version will also be compiled in the near future.
And yes capacitive button don't light up.
Don't know why!!!
And fastboot flashing?
Does we have fastboot?
Which model do you have?
Sent from my LG-P725 using xda premium
I have LG p720.
I spoke to you on Facebook anyway nevermind =)
Sent from my GT-I9300 using xda app-developers app
Cust ROM
Am waiting for a custom ROM from you :fingers-crossed:
One question though. What base are you using? GB or ICS?
Sam3087 said:
Am waiting for a custom ROM from you :fingers-crossed:
One question though. What base are you using? GB or ICS?
Click to expand...
Click to collapse
As we have GB only i will work.on custom rom of GB and will also try to port ICS from 3D cube.
Sent from my LG-P725 using xda premium
Great problem
hi guiz i need help.
I have installed the modified cwm with success.
Then i have yhe insane idea to install rom manager from market and to set that i have installed the cwm manually.
Then i type rommanager to reboot into recovery.
Now there's no way to boot again normally, the recovery is shown at each boot.
So mi phone is stucked on "cwm-based Recoveru 6.0.1.2.
I have tried all wipe possibility.I've tried also to go in emergency mode but there's no way,
Is bricked?
suggestion?
EDIT " i succeed to install omap drivers in the second that the phone was recognaiz, than with fastboot i don't know why or how it goes to emergency recover, so i was able to recovery it. Now is ok
Thanks eklovya
How can I revert to stock recovery of LG?
Does this recovery need wkparks unlocked x-loader and u-boot?
saaqirajput said:
Does this recovery need wkparks unlocked x-loader and u-boot?
Click to expand...
Click to collapse
No.
Hi
I'm not sure it's the right place for my post, but I've got a question about your recovery image.
I tried all possible CWM recovery images on my P720 phone, no way to make it boot on it, I've got the LG logo that's all.
I'm nearly sure it's trying to access the recovery partition to boot, because in normal power up conditions it's working.
Is there a way to debug my situation (console ...) ?
Where can I find informations about the recovery booting process ?
How did you build your recovery image for p720, i would like to try to put some debugs ? I found a generic tutorial here http://forum.xda-developers.com/showthread.php?t=1935162 but is there specific changes t do ?
On some thread people are talking about the fastboot mode but I found nothing for p720, did I miss something ?
thanks for any answer
Marc
tybreizh29 said:
Hi
I'm not sure it's the right place for my post, but I've got a question about your recovery image.
I tried all possible CWM recovery images on my P720 phone, no way to make it boot on it, I've got the LG logo that's all.
I'm nearly sure it's trying to access the recovery partition to boot, because in normal power up conditions it's working.
Is there a way to debug my situation (console ...) ?
Where can I find informations about the recovery booting process ?
How did you build your recovery image for p720, i would like to try to put some debugs ? I found a generic tutorial here http://forum.xda-developers.com/showthread.php?t=1935162 but is there specific changes t do ?
On some thread people are talking about the fastboot mode but I found nothing for p720, did I miss something ?
thanks for any answer
Marc
Click to expand...
Click to collapse
no need to use any debug method.
1st make sure that the recovery is flashed successfully..
Please provide me some screenshots for my confirmation.
And as you can see the their is no problem in recoveries...
And please also let me know recovery you flashed.
Sent from my LG-P725 using xda premium
Eklovya said:
no need to use any debug method.
1st make sure that the recovery is flashed successfully..
Please provide me some screenshots for my confirmation.
And as you can see the their is no problem in recoveries...
And please also let me know recovery you flashed.
Sent from my LG-P725 using xda premium
Click to expand...
Click to collapse
I'm sure it's well flashed.
I flash the mtd then i dump back the mmcblk0p6 partition into a file and the data are in it (diff ok), plus the previous data over 0x4F5000.
I tried
cwm5.0.2.8.img from xda
cwm6.0.1.2recovery.img from xda
clockwork-6.0.2.3-p720.img from cwm site
On another LG, a p920, it worked flowless ! My p720 makes me crazy (the only other modification on it : rooted).
What kind of screenshot do you need ?
can it be used with SU870?
thyk888358 said:
can it be used with SU870?
Click to expand...
Click to collapse
you can give a try and report if it works.
Sent from my LG-P725 using xda premium
Hi, I have a problem with my LG O3D. I have root my phone with superoneclick and then i've installed rom manager. I click on "reboot into recovery", because i wanted backup the rom but when I reboot it gets stuck on the logo LG.I tried the key combination to hard reset but does nothing. What can i do? thanks to anyone who will answer me
It works great.
Thank you so much
Great! My phone is rooted and I now also have the CWM 6 recovery installed and working.
Thanks!
I am having Lg optimus one p500.. After flasing it using rom manager i used the option restart in recovery mode then the phone got stuck with the lg logo and not going beyond that, what should i do now?
Search button is your best friend, mate. Search for unbricking.
Or try this : http://forum.xda-developers.com/showthread.php?t=1318750
--
P>
Sent from my LG-P500 using xda app-developers app
if u still want to flash recovery use this its the safest method
http://forum.xda-developers.com/showthread.php?t=2003080
Hi Rocky,
Were u able to fix the issue ?
I mean...i faced the same problem but it took me couple of days & a whole lot of googling to fix it
ROM - Paranoid Android by Bytecode
Sent from my LG-P500 using xda app-developers app
Rockybala90 said:
I am having Lg optimus one p500.. After flasing it using rom manager i used the option restart in recovery mode then the phone got stuck with the lg logo and not going beyond that, what should i do now?
Click to expand...
Click to collapse
Pretty simple .. put to emergency ..attach to pc with usb .. flash stock with kdz ... after phone starts root with superoneclick and flash amon ra recovery with flash gui ... switch off phone .. press and hold home+volup+power to go into recovery
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Next time flash through recovery, flashing through rom manager can cause problems...
Sent from my LG-P500h using xda app-developers app
Just an advise, try to avoid using KDZ. Perhaps, KDZ already bricked by set thrice even If I followed everything carefully. Some errors cannot be resisted.
On the other note, using ROM manager to flash recovery is recommended only when you have a fast WI-FI or 3G connection. Your error was caused due to the flashing of corrupted recovery.
DJBhardwaj said:
Just an advise, try to avoid using KDZ. Perhaps, KDZ already bricked by set thrice even If I followed everything carefully. Some errors cannot be resisted.
On the other note, using ROM manager to flash recovery is recommended only when you have a fast WI-FI or 3G connection. Your error was caused due to the flashing of corrupted recovery.
Click to expand...
Click to collapse
For some reason CWM tends to give a lot of soft brick problems .. its better to flash amon-ra 3.xx via the FlashGUI app
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
anaknin said:
For some reason CWM tends to give a lot of soft brick problems .. its better to flash amon-ra 3.xx via the FlashGUI app
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Click to expand...
Click to collapse
The new BB version of the recovery; 5.0.2.7 is buggy while 5.0.2.0 is stable.
Sent from my Nexus S
DJBhardwaj said:
The new BB version of the recovery; 5.0.2.7 is buggy while 5.0.2.0 is stable.
Sent from my Nexus S
Click to expand...
Click to collapse
Correctly said .. amon ra for new bb is stable and works like a charm
pls hit thanks if I helped in any way
:: peace
Sent from Legendary o1
Fixed the problem of LG flashing logo.
downloaded the v10E_00.kdz file from the forum...LGMDP doesnt work .....KDZ_FW_UPD_EN worked for me.....
In the emergency mode (press return button+vol down+power button) connect the usb with the pc......pc will automatically find the mobile connected after some 2min or less......now go to the device manager and disable the lg modem from the modem option......then open the KDZ folder install the .msi package and start KDZ_FW_UPD.exe inside the folder the KDZ window opens in that select the option 3GQCT for Type and for the PhoneMode select cs_emergency then select the .kdz file from the folder where u placed it in ur pc.......Click Launch Software update it will start installing the rom after some minutes it will be completed......Thats it....then i installed the same rom manager and this time i flashed it with lg optimus one old bb(old baseband)(5.0.2.7)option.....then i installed jelly bean after successfully installed there too i got a problem with the network is not connecting the i searched and found the new baseband P500-v20G-baseband then installed it using LGDMP......
After u successfully solved the problem of flashing LG logo the other problems are easy to solve.....:good::good::good: I'll try to put those download links installation details......if not useful misses please pardon me......
download link
Download this...
((csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AINDBK/V10e_00/V10E_00.kdz)))
the threads are jumbled I can't get guide regarding flashing bernie's file to get CM10 working on V20P baseband,plz someone help?
eternal.sumit said:
the threads are jumbled I can't get guide regarding flashing bernie's file to get CM10 working on V20P baseband,plz someone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1942836
Get Xbsall's Rebooter Tool From Here.
Open the executable.
Select V21e and press enter.
Now take out the battery but be ready to plug it back in.
Connect the USB cable , now you should see a lot of details and at the end of the command line you should see this "Waiting for 5 seconds". That's when you plug the battery back in.
After that it should take care of the rest.
Cheers.
Sent from my LG-P920 using xda premium
still not clear
boltthrower56 said:
http://forum.xda-developers.com/showthread.php?t=1942836
Get Xbsall's Rebooter Tool From Here.
Open the executable.
Select V21e and press enter.
Now take out the battery but be ready to plug it back in.
Connect the USB cable , now you should see a lot of details and at the end of the command line you should see this "Waiting for 5 seconds". That's when you plug the battery back in.
After that it should take care of the rest.
Cheers.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I meant what are the bernie's files that i need to flash and how?so that i could run CM 10 on V20P baseband without problem
eternal.sumit said:
I meant what are the bernie's files that i need to flash and how?so that i could run CM 10 on V20P baseband without problem
Click to expand...
Click to collapse
Dude , do as i say and you won't have a problem. Think of the rebooter tool as "bernie's files flasher for newbs".
Edit ; Here is the link to the rebooter tool in case you can't find it;
http://d-h.st/24C
u dont actually need bernies files u need 2 be on a p920 fw n you are using a p925 so u cant flash cm10
just update to v21e and root install cwm and flash cm10
boltthrower56 said:
Dude , do as i say and you won't have a problem. Think of the rebooter tool as "bernie's files flasher for newbs".
Edit ; Here is the link to the rebooter tool in case you can't find it;
http://d-h.st/24C
Click to expand...
Click to collapse
i did as you said,after displaying long scripts it says:
**DONE**
<waiting for device>
and hangs on for long time.when i disconnect and open phone phone it doesn't show any network signals.what to do?
idriff said:
u dont actually need bernies files u need 2 be on a p920 fw n you are using a p925 so u cant flash cm10
just update to v21e and root install cwm and flash cm10
Click to expand...
Click to collapse
This is not true if you flash Bernie files it will work on the p925 with the v20 bb. I have tried and used all the cm10 ROMs and they all had good signal WiFi works data works phone works.
Sent my from nook tablet using android 4.2.1 jb /cm10.1 rom.
how to i fix that as i get a bootloop now with ics by which i mean will re flashing the bin and ap fix?
sorry not bootloop, it just sits at lg logo
Mozzytm said:
sorry not bootloop, it just sits at lg logo
Click to expand...
Click to collapse
I've flashed wkpark's v1.25a in v28b official ics and it's working fine...
if it helps anyone to help me figure out what the hell ive done,
the factory reset mode isnt there either when i press power and vol + or vol-
you have to flash kdz again,phone in downloadmode then flash with lg ofine tool
Sent from my LG-P920 using xda premium
MastaZz said:
you have to flash kdz again,phone in downloadmode then flash with lg ofine tool
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
smartflash. baseband only. do not check the Erase option. careful where yoy put the fls file - only in the CP field.
http://www.wuala.com/caroceiro/opti....fls/?lang=pt&id=1,1231361,11-1094,1639365,18