Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Not working for me:
DC - Unlocker 2 Client 1.00.1201
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM4
Found USB interface {3F966BD9-FA04-4EC5-991C-D326973B5128}
Found modem : HUAWEI G6-L11
IMEI : 864037024395912
Firmware : 8226C00B109
SIM Lock status : unknown(read failed)
modem not found !
Click to expand...
Click to collapse
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
What phone model do you have???? Dont work in L11 LTE ...
I have the l11 4G LTE
Dont foget to enable manufacturer mode, it is necessary for qualcom phones
and make sure that you have the correct drivers
bugggmenot said:
Not working for me:
Click to expand...
Click to collapse
That is because you have modem in the field, you must select HUAWEI PHONE and not HUAWEI MODEM, hope it helps
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
persona78 said:
Hi! I have the drivers, I try with debug mode on and off, I change the connection in engineering menu like you say, try all the usb types and nothing....
Click to expand...
Click to collapse
What error dc unlocker shows?
Thanks!!
Diogo Glória said:
What error dc unlocker shows?
Click to expand...
Click to collapse
no device.
but i think i need to reboot the phone when i choose Manufacturer mode, i dont try yet....
Do you have done any reboots?
Diogo Glória said:
Yesterday i sent an email to huawei asking for the bootloader codes to my huawei g6-l11 and today they reply that they dont have the codes for this phone. Looked deeper into google and find out that dc unlocker already supports reading bootloader codes for this phone instantly
Here are the steps:
1. Download the last DC Unlocker Software
2. Install ADB drivers or Hisuite ( search forum )
3. Enable Manufacturer Mode, This is done by entering in dial pad code *#*#2846579#*#*, select "Project Menu", "Background settings", "USB ports settings", "Manufacturer mode".
4. Connect Phone to usb and open DC UNLOCKER
5. Open DC UNLOCKER and select Huawei Phones in manufacturer and leave the model Auto detect
6. Click on the magnifing glass and wait for detection
7. Voilá, the bootloader code appears in the BOX
8. Download Unlock Huawei Device GUI ( I cant leave links here but google is you friend )
9. Put the code generated by DC UNLOCKER in The field and click unlock
10. TADAAAAAAAA Unlocked Instantly
Remember, you can use this method to get the unlock code and you can use other methods to unlock the boot loader, just search the forum :good:
Click to expand...
Click to collapse
When i open DC unlocker the Ports Section is always blank any solution?
Tutorial in next post works.
#HuaweiBootloaderUnlock
Hi! To Unlock the bootloader, first try this site, but if you don´t have you need to create a account ( free ):
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
Insert your data like this example for U10:
http://postimg.org/image/6kddvoboj/
U10-G6, huawei G6-U10, etc..., DON´T WORK! Insert it like image shows.
Example for L11 model:
http://postimg.org/image/wha6ixm85/
Be sure from the data you are inserting...
If the Huawei site don´t work than try the next tutorial...
About the DC - Unlocker client and how to get the bootloader code.
It WORKS and i found how it works.
Here are the steps:
1. Need a internet connection and don´t use a proxy server, download DC-Unlocker but only this version works, install it and reboot :
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
http://consumer.huawei.com/minisite/HiSuite_en/
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4.With the phone >>>> UNPLUGED<<<<:
Enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode"
"CORFIRME"
5. Connect the Phone to usb, check if PC is installing the phone, wait to finish to install it. It will pop up a window in phone to choose connection, DON´T DO ANY THING, let it be like it is, in charge mode.
6. Execute, OPEN DC- UNLOCKER FOLDER A EXECUTE THE EXE FILE WITH ADMINISTRATIVE PRIVILEGES, DC UNLOCKER and Select Huawei Phones in manufacturer and leave the model in Auto detect
7. Click on the magnifing glass and wait for detection. Ignore any advise that you are using a old version of dc-unlocker, in new version to use this option you need to pay.
8. You will see the bootloader code appears in the BOX bellow.
9. Use this software and the unlock bootloader option, 18 option:
https://mega.nz/#!WgoVWLjQ
Key:
!YV1JLOGvXX4rvYreDXP1Twwh-V5O65NjmMxBH_7unUI
Read this- BOOTLOADER Unlocking-Relocking Procedure:
https://www.facebook.com/download/1560613864260023/BOOTLOADER Unlocking-Relocking Procedure.docx
If still don´t work, go here:
https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
Hi, thanks for this tutorial. I have followed these steps:
persona78 said:
Hi!
This is how i made it:
Here are the steps:
1. Download DC-Unlocker but only this version works, install it and reboot :
2. Turn ON debug mode
Go to Settings -> About phone -> Press several times Build number it will say "you are a developer now" -> go back and open Developer options ->Turn ON USB debugging -> DONE
3. Install ADB drivers with Hisuite ( best way ):
The first time HiSuite try to connect with the phone, in the screen phone it will pop up a Windows requesting permissions for the connection with PC, MUST GIVE IT!
4. It need to enable USB Manufacturer Mode in phone:
In dial pad type code *#*#2846579#*#*
select "Project Menu"
"Background settings"
"USB ports settings"
"Manufacturer mode" (IF OPEN THE MENU TO CHOOSE THE USB CONNECTION PRESS RETURN TO GO BACK TO CONFIRME)
"CORFIRME"
And Reboot the phone,.
5. Connect Phone to usb (MY DEBUG MODE WAS ON AND USB FLASH DRIVE WAS SELECTED) and open DC UNLOCKER.
6. Select Huawei Phones in manufacturer and leave the model Auto detect
7. Click on the magnifing glass and wait for detection
8. You will see the bootloader code appears in the BOX bellow.
Click to expand...
Click to collapse
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
jjjuuann said:
Hi, thanks for this tutorial. I have followed these steps:
In step 8, I get some information about my phone but the bootloader code is not there. All the information I get is the following:
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM5
Found Diagnostics port COM7
Found Phone : HUAWEIG6-L11
Model : Huawei Qualcomm Android phone
IMEI : XXXXXXXXXXXXXXX
Serial NR. : T7L7N1XXXXXXXXXX
Firmware : MSM8226C00B119_AMSS Sep 15 201410:04:11
Hardware ver. : HL1G6L22M
Wi-Fi MAC : XX:XX:XX:XX:XX:XX
BlueTooth MAC : XX:XX:XX:XX:XX:XX
SIM Lock status : unlocked
I suppose that the bootloader unlock code should be there but it is not. Is it possible that this method doesn't work for my phone? Or have I done something wrong?
Thanks for your help.
Click to expand...
Click to collapse
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
https://mega.nz/#!ykxjiRia!ppWG22acgv35N5j1VMTsZlKMi0i0JQB9v8BVn5l98WI
DC-unlocker-client-software-V1_00_1201
persona78 said:
Your DC-Unlocker is this version V1_00_1201????? Only this one shows the code, the new versions dont!
The link i post is for V1_00_1201 version, the only one that works on G6!
-----
F...k the download link for that version is not there any more.... I think i have it, i will upload and post it!
--------------
This is the right version
DC-unlocker-client-software-V1_00_1201
Click to expand...
Click to collapse
As you said, the problem was the version of DC-Unlocker (I was trying with version 1.00.1214).
I finally got my bootloader code with version 1.00.1201
Thank you very much for your help!!!
The new versions have that option to but need to activate the paid version... to many downloads made a opportunity for the creator, I think.
WOW finally it worked!! Tnx persona :X
notice that after installing HiSuit and ADB drivers, you need to recheck "Manufacturer mode" again. that was the part that took a lot of time for me to realize. even no restart needed!!
I had "Debug mode" on , Mass Storage and used DC Unlocker V1_00_1201 .
it seems DC Unlocker gets BL code frome a server, so make sure your anti virus allows DC Unlocker to connect.
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
sleo38 said:
Hi personna78
It doesn't work with my device.
I use dc-unlocker v1.00.1201
I use debug mode and usb flash drive
I use manufacturer mode
I get this answer:
Found phone : huawei g6-l11
IMEI : xxxx xxxx
Firmware : g6-l11v100r001c900b370
Device may be in wrote mode
Can you help me ?
Click to expand...
Click to collapse
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
persona78 said:
Hmmmm, when you change to manufacture mode, confirm and don't reboot try dc unlocker than.
Click to expand...
Click to collapse
Hi personna78
OK, it is work non. Thank a lot
Hello,
I have a MediaPad x2 that after trying to upgrade to android 6.0've blocked, do not get into the system, the only thing a Chinese recovery that seems to be too bad.
I tried to follow this manual https://www.dc-unlocker.com/how-to-r...er-unlock-code, I have purchased 4 credits I have installed adb and fastboot but the problem is I can not get past the first step:
step 1
IMPORTANT: Before proceeding, enable "manufacturer mode" on your phone. This is done by entering in dial pad code * # * # 2846579 # * # *, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
I have spoken with DC UNLOCKER try this https://www.dc-unlocker.com/DC-Phoen...epair-tutorial.
I wonder if someone knows some other method, maybe is possible boot image ^live^ in sdcard external and change options for step1
Thanks in advance
Install huawei hisuite.
Enable developer options.
Check debugging modus.
Call the phone application, as if you what to call someone
Type this long number including # and *
which you find in dc-unlocker manual and press the green dial number.
Instead of a call, this will show a menu where you can enable the manufacture mode.
To boot in TWRP you must flash the English version twrp for 5.0 and unplug the usb cable.
Otherwise you get this pictures of EMUI dload OTA, which you have posted.
All links you find in the root thread.
My device: 701->703 Kang VIP B209
I can't able to flash with odin . I have tried all options like changing USB cable / USB port / other odin version .
Odin shows : Can't open the serial (COM) PORT
complete write failure
In download mode : SV .REV .Check fail (Bootloader ) Device 11, Binary 4.
My device is not in development mode - OEM / USB debugging - Disabled
VIJIKRISHNA said:
I can't able to flash with odin . I have tried all options like changing USB cable / USB port / other odin version .
Odin shows : Can't open the serial (COM) PORT
complete write failure
In download mode : SV .REV .Check fail (Bootloader ) Device 11, Binary 4.
My device is not in development mode - OEM / USB debugging - Disabled
Click to expand...
Click to collapse
Kindly help me to come out of this issues
You must complete the all four binary needed not only ap buat all of them