okay so I had no clue want I was doing and just rooted my Samsung s6 sm-g920i (optus), Worked like a charm went straight to get twerp also worked with no problems then i tried to get xposed now heres where the problem began, it said i needed to manually flash the frameware so i did and it 'failed' couldn't find what was wrong utill it tried the arm64 version ,at this point i had no idea what i was doing and still dont, and then tried to flash it. SUCCSESS twrp says, i got to start my phone and it just doesnt its stuck in a bootloop i try to get the stock framework couldnt find 5.1.1 so i tryed 5.0.2 and it just kept saying failed, then i went into twerp and tried to facory reset it and it didnt work so i went into advanced wipe and ticked everything hit restart 'you have no os on this phone' then tried stock firmware through odin and it didnt work again. So any advice
http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
Hi,
Thanks for writing to us at XDA Assist.
Download a stock firmware for your device: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387
And flash it through Odin.
Feel free to post your questions in the General Q&A thread of your device to get further assistance: http://forum.xda-developers.com/galaxy-s6/help/help-thread-question-s6-t3110220
BTW I do recommend you to read more before flashing stuff on your device.
Good luck!
Related
Okay So, I had rooted my s4 Active i537 using towel root and then installed safestrap to unlock the bootloader and get twrp recovery , everything went good till i decided to flash a stock lollipop rom then i remembered that i forgot to backup then i also had forgot to turn on debugging , so then i bricked the phone , i can get into download mode and twrp and stock recovery but everytime i try to flash to stock it flashes but when its booting up safestrap comes up and dont let even if i hit continue it either brings me to stock or twrp and need to know how to reset it back fully with no safestrap i cant sideload to even see if adb will work bc an error pops up and says "Libc.SO Needed
Please help me !:crying:
Hi, thank you for using XDA Assist. The purpose of XDA Assist is to point you in the right direction on XDA. I see you've posted this question in other threads of XDA which are the right areas to post. The only other suggestion I can give you is to flash the stock firmware in oding. Please see this, http://forum.xda-developers.com/galaxy-s4-active/general/galaxy-s4-active-firmware-guide-t2892445
Since you've already posted your question in the right areas of XDA I'm going to close this thread.
Hi, so I am on a Galaxy S5 16gb running lollipop 5.0 through sprint. Im not too in this scene but Ive known enough to successfully root and unroot several other phones without.any problems. I successfully rooted my S5 using Cf auto root and everything was perfect until I tried flashing a .zip file for xposed installer through recovery. Ever since my phone wont go.past the samsung logo on start up. I am able to still access download and recovery mode. Every time on odin I try to flash the stock firmware (ive tried three.different ones) it ends up saying " nand write start fail" then "complete write operation failed". This is stressimg me out hardcore and im completely unsure of what I need to do. Much help needed.
XDA Visitor said:
Hi, so I am on a Galaxy S5 16gb running lollipop 5.0 through sprint. Im not too in this scene but Ive known enough to successfully root and unroot several other phones without.any problems. I successfully rooted my S5 using Cf auto root and everything was perfect until I tried flashing a .zip file for xposed installer through recovery. Ever since my phone wont go.past the samsung logo on start up. I am able to still access download and recovery mode. Every time on odin I try to flash the stock firmware (ive tried three.different ones) it ends up saying " nand write start fail" then "complete write operation failed". This is stressimg me out hardcore and im completely unsure of what I need to do. Much help needed.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device main forum:
http://forum.xda-developers.com/galaxy-s5
Here is where you should post your question:
http://forum.xda-developers.com/showthread.php?t=2700073
The experts for your device are located there and will be able to help you.
Good luck!
GUYS!!! SOMEONE HELP ME PLEASE!!!! Okay i have a Galaxy S6 version 5.0.2 running AT&T G920AUC1AOE2. i had it rooted with ping pong root and everything was working alright. so i noticed i didnt have a custom recovery and i needed one to install other root items. I decided to try TWRP and followed the instructions from Techno buzz... just google s6 custom recovery and its the first one! and everything seemed to go fine until i tried to rebooted to get into my TWRP. and when i did all i got was a reboot and the normal start up screen that says Custom Binary Blocked by Reactivation Lock on the top left hand corner in red letters!! it doesnt go past here!!! ive had some experience with rooting and things like that but this time i dont know!!! i tried downloading the Stock Rom from an XDA forum but it was the OCE version... not the one im on which is OE2. so when i tried to install it would get stuck on NAND WRITE START!!! on odin!! i also didnt have USB Debugging on but i dont think thats the problem. the drivers are properly installed...i found a stock rom that is OE2 and i will try with that..PLEASE if anyone can help me i would really love your help!!! also please try to contact me at [email protected] PLEASE THIS IS MY LAST HOPE!!!!
Update
Okay so odin isnt gonna work.. so i found out i had a galaxy s2 lying around that wasnt running smoothly and i was trying to use odin to maybe flash a stock onto it. but i remember i had kies. so i went there and went to the firmware install. asked for the model number and it worked, asked for the serial number and it worked, then it downloaded and everything worked. so then with my s6 it isnt supported so i tried smart switch. i went to firmware install. model number was good, but when i type the serial number the whole program closes and i cant do anything. i would try to use odin to mess my phone up and try A emergency recovery but i cant even write with odin. im getting close so any ideas??
Hi there,
You'd be best served asking for help from the experts who own your device here:
AT&T Galaxy S6 Q&A, Help & Troubleshooting
Good luck
To the kind souls out there,
I just tried doing a factory reset on my phone. Now the phone boots into the setup wizard loop stating ''please wait while we prepare your phone''. It never seems to finish preparing so theres definitely something wrong.
The phone was running a pre-rooted g900v stock OE1 with an OD5 bootloader that I had flashed using the flashfire method months ago.
I am still able to get into recovery and download mode luckily but I really don't know how else to get passed this wizard loop.
The instructions I had followed when I had first flashed the rom that I factory reseted are in this link http://www.droidviews.com/install-lo...ifi-tethering/.
I removed sim and sdcard and did factory reset again from recovery with no help.
I attempted to flash both pre-rooted OE1 and OG5 but Odin keeps returning FAIL!
I also attempted to flash G900VVRU1ANCG_Full_Odin.tar ( a downgrade) but ODIN keeps returning a fail after ''Nand Write start'' step.
Please please please help me! Any feedback would be greatly appreciated!!!!!
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Verizon Galaxy S 5 Q&A, Help & Troubleshooting
Good luck!
Hi. I had cyanogenmod recovery installed when trying to update android to kitkat, and suddenly the phone wouldn't boot into recovery, instead i got a dead android icon and a CSC error msg, and commands would not respond. Able to boot phone, and after a factory reset I have a cyanogenmod version running, but with Playstore access errors (as described widely on forums, not responding to clearing cache, restart etc).
I want to start again.
I have latest USB driver, Odin dl'ed and ready to go.
My question: Can I flash a latest Cyanogenmod, or do I need to return to stock firmware?
(I read somewhere that if exact firmware for device not flashed, it will permanently brick the phone, and my model is GT-N1705, nearest version is GT-N1700)
Many thanks in advance
ann1e said:
Hi. I had cyanogenmod recovery installed when trying to update android to kitkat, and suddenly the phone wouldn't boot into recovery, instead i got a dead android icon and a CSC error msg, and commands would not respond. Able to boot phone, and after a factory reset I have a cyanogenmod version running, but with Playstore access errors (as described widely on forums, not responding to clearing cache, restart etc).
I want to start again.
I have latest USB driver, Odin dl'ed and ready to go.
My question: Can I flash a latest Cyanogenmod, or do I need to return to stock firmware?
(I read somewhere that if exact firmware for device not flashed, it will permanently brick the phone, and my model is GT-N1705, nearest version is GT-N1700)
Many thanks in advance
Click to expand...
Click to collapse
Greetings and welcome to xda, I would recommend using odin to flash stock and start over again just to be safe. Your model sounds like the lte variant which is the N7105 not the n1705. As long as you use odin to flash a N7105 firmware you will be fine. You can find your firmware here
http://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
Good luck
Sawdoctor
sawdoctor said:
Greetings and welcome to xda, I would recommend using odin to flash stock and start over again just to be safe. Your model sounds like the lte variant which is the N7105 not the n1705. As long as you use odin to flash a N7105 firmware you will be fine. You can find your firmware here
http://forum.xda-developers.com/galaxy-s7/how-to/updato-largest-online-firmware-archive-t3413785
Good luck
Sawdoctor
Click to expand...
Click to collapse
Thanks, Sawdoctor. I did exactly as you recommended (with the help ofsome youtube videos) and I'm laughing. Had a bit of fiddling with GApps to get the right one, but after a few tries & cache wipes it all booted up and is working a treat. Thankyou thankyou thankyou
Ann1e