Related
Hi just wondering if I can get a bit of advice regarding flashing my Samsung note 10.1 back to the original firmware.
Currently I have the tablet rooted with the ClockworkMod but I want to go back to stock as I am selling my 16GB wifi note 10.1 and upgrading to a note 10.1 32GB 3G model.
I have been reading up on how to flash it back to stock and I think I have most of it figured out,I found a video on the rootgalaxynote website called how to install stock recovery on your rooted galaxy note 10.1,but what my main question was is which is the right stock image to use.
In my about device in the note 10.1 settings it says build number is N8010XWALG4 and my note 10.1 is the Australian version so I did a search on sammobile and it came up with this firmware (Australia 2012 August N8010XWALG4 N8010XSAALG3) is that the right firmware for me,it's just that when I did the search and selected the country it only had Australia XSA for the Australian options,do you know what XSA means.
Anyway I really just wanted to check with someone here before I go ahead with flashing it back to stock.
Wish I could help but all I can contribute is this: questions don't belong here, they belong in the QA section...
As for your search, if it were mine, I'd be looking for stock n8010 firmware... I don't think you could go wrong with that
Sent from my GT-N8013 using xda app-developers app
Connect ta to PC. Run Kies and check out what your stock CSC code is that way. If it matches with XSA then go ahead and flash. I got mine through the net and my CSC is INU meaning it's an Indian tablet but I can still flash whatever I want on it.
Where'd you find the 32Gb tablet in Oz and for how much? I know a lot of places are selling 32Gb tablets but they're only 16Gb with a 16Gb microsd card or they're wifi only... I've been looking...
this is where you can get the stock firmware for N8010:
http://www.sammobile.com/firmware/?page=8&view=6580
then flash it using odin.
younix258 said:
Wish I could help but all I can contribute is this: questions don't belong here, they belong in the QA section...
As for your search, if it were mine, I'd be looking for stock n8010 firmware... I don't think you could go wrong with that
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
ok thanks for that I'll make sure I place my thread in the correct section next time,I am new to this forum so I am still getting to know my way around.
Thanks.
ultramag69 said:
Connect ta to PC. Run Kies and check out what your stock CSC code is that way. If it matches with XSA then go ahead and flash. I got mine through the net and my CSC is INU meaning it's an Indian tablet but I can still flash whatever I want on it.
Where'd you find the 32Gb tablet in Oz and for how much? I know a lot of places are selling 32Gb tablets but they're only 16Gb with a 16Gb microsd card or they're wifi only... I've been looking...
Click to expand...
Click to collapse
Thanks yeah I downloaded the Kies program and the numbers seemed to match up to the firmware on the sammobile website so I'll go ahead with that.
You know you mentioned the 32GB 3G version I went and had a look and last time I was at jbhi about a month ago they had the 32GB 3G models,but now looking at their website today they only seem to stock the 16GB wifi model,so it looks like I am going to have to track one down elewhere,I'll let you know if I manage to find them anyway.
darkthug420 said:
this is where you can get the stock firmware for N8010:
http://www.sammobile.com/firmware/?page=8&view=6580
then flash it using odin.
Click to expand...
Click to collapse
Thanks I am downloading it now,I'll do the firmware update when it downloads.
There was one other question I had,I read somewhere that when you root the note 10.1 samsungs has some sort of counter going on,and somehow I have to reset the triangles before I restore the original firmware,do you know how I go about doing this.
That counter is to show Samsung that you have flashed non stock firmware on your device. Triangle away on market fixes this.read thread on here about using it.
I have heard that Samsung does not void warranty for hardware issues even if your Device is not stock.so not sure how important it is to remove the troangle count. It would most likely prevent you from returning it to store if they check the device..only my best guess
erica_renee said:
That counter is to show Samsung that you have flashed non stock firmware on your device. Triangle away on market fixes this.read thread on here about using it.
I have heard that Samsung does not void warranty for hardware issues even if your Device is not stock.so not sure how important it is to remove the troangle count. It would most likely prevent you from returning it to store if they check the device..only my best guess
Click to expand...
Click to collapse
ok thanks for that,I will go and download that triangle away app on the market before going ahead,there is one other problem I have just noticed,I am having trouble trying to get the odin3 1.85 program to recognize the stock image I downloaded,like when I start up the odin3 1.85 and I press the pda button to browse for the stock image which is called N8010XWALG4_N8010XSAALG3_XSA.zip odin3 can't see the file for some reason,I noticed on the right side it seems to be looking for .tar images,but the problem is the stock image N8010XWALG4_N8010XSAALG3_XSA.zip I downloaded is a zip file.
Do you know what I am doing wrong here.
Extract the
Maybe the stock download was ziped to compress it.try unzipping. Unless you downloaded a cwm flashable zip.
Odin files are supposed to be TAR not ZIP
erica_renee said:
Extract the
Maybe the stock download was ziped to compress it.try unzipping. Unless you downloaded a cwm flashable zip.
Click to expand...
Click to collapse
yeah it was zipped so I went and extracted the original zip file and it extracted a file called KIES_HOME_N8010XWALG4_N8010XSAALG3_976376_REV00_user_low_ship.tar.md5 so I deleted the .md5 from the end of the file name and left the .tar to make it a tar again,don't know why samsung put .md5 at the end of a .tar file,anyway once I changed it to read as a tar file I loaded it up in odin3 and it started to flash the new image.
It took about 4 minutes to do the flash but now it's all good I am backj running the stock firmware,to make sure I held down the power and volume up buttons and it went to the stock recovery mode instead of the ClockworkMod recovery.
Also I got that triangles away program and reset the counter just in case.
Anyway thanks for your help.
garryrw said:
ok thanks for that,I will go and download that triangle away app on the market before going ahead,there is one other problem I have just noticed,I am having trouble trying to get the odin3 1.85 program to recognize the stock image I downloaded,like when I start up the odin3 1.85 and I press the pda button to browse for the stock image which is called N8010XWALG4_N8010XSAALG3_XSA.zip odin3 can't see the file for some reason,I noticed on the right side it seems to be looking for .tar images,but the problem is the stock image N8010XWALG4_N8010XSAALG3_XSA.zip I downloaded is a zip file.
Do you know what I am doing wrong here.
Click to expand...
Click to collapse
extract the zip 1st then select the extracred file you will see it has a ext of .tar.md5
Sent from my Galaxy Nexus using xda app-developers app
Thread Moved.
Hey everyone,
I need someone to pull up and post a .pit file for the Samsung Galaxy Note 10.1 GT-N8013 because I can't use OTG host, and the unit no longer charges on USB. This happened after the incorrect ROM was loaded on the device, which I thought was the correct ROM oops.
Thanks for any help
Might be found on sammobile.com .
jje
JJEgan said:
Might be found on sammobile.com .
jje
Click to expand...
Click to collapse
Hey,
I looked there and didn't find it. Also, maybe I don't need a pit file. The main issue is at when my system is restored USB does not work and the system will not charge through USB. This happened using teamwin recovery and installing the incorrect rom, AOKP P4wifi instead of P4notewifi as I had forgotten the correct name for the device. The next step is that I had to do a mke2fs on /efs to make /efs mount which is why I thought I needed a pit file to repartition the entire device and restore the software.
Any help at all to make the device work properly again would rock. I'll post a solution here and to my company knowledge base once a fix is found.
Thanks everyone
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
pit file download
Droiddevelopers a com site has the pit file. Hope this helps
marcusah123 said:
Hello,
I guess I need the 4.0.4 stock rom or something from samsung that I can write to the device that will blow away all customizations and return it to as if I pulled it out of the box originally. Something is REALLY FRELLED UP.
HELP ME I'M A MORN!!!! apparently...
Click to expand...
Click to collapse
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
stevessvt said:
You can find the latest stock 4.0.4 here, you must register to download.
http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=0&os=1&type=3#firmware
Click to expand...
Click to collapse
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Ive used it on my 10.1, no problems.
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Hack pit file..
marcusah123 said:
Hey
I didn't find a pit file on that website for my device no links.
Ideas?
Click to expand...
Click to collapse
I have the same problem.. Can we use the pit file of gt-8010?? WHo can hack it?
conan1600 said:
I dont find any downloads on that site for the usa n8013 ueclk8 wifi only. There is only a download for cellular south products and thats a cell phone company in my area.
Click to expand...
Click to collapse
The Cellular South file IS the 8013. I have no idea why it is labeled as that, but I have used both 4.0.4 & 4.1.2 from Sammobile for my 8013. Trust me, both work.
losguy said:
Droiddevelopers a com site has the pit file. Hope this helps
Click to expand...
Click to collapse
So are you going to provide a link to a file or even a valid website? Otherwise, no, this doesn't help, even a little.
Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.
Start by flashing stock rom through Odin .
JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk
JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse
JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?
That one flashed through Odin and hopefully its a later bootloader
JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.
Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA
Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you
Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead
Did you try using Smart Switch on pc and recover software that way?
Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..
I have run out of options. Sorry.
Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success
will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
It could be the internal memory fault. That's why it stops at 1/4 each time.
*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also
Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.
Hi guys, so i got the Pie update notification but at the end of the downloading, so before installing, it says that the file is invalid and i can't do pretty much anything else.. I also tried to install the update manually with odin but it got stucks at the middle of flashing doing nothing.
Also performed a factory reset and i've got the same problems..
I tried to update it like 50 times (?) in a month
I think i have to return it.. Nice Samsung as always ._.
alecaputo97 said:
Hi guys, so i got the Pie update notification but at the end of the downloading, so before installing, it says that the file is invalid and i can't do pretty much anything else.. I also tried to install the update manually with odin but it got stucks at the middle of flashing doing nothing.
Also performed a factory reset and i've got the same problems..
I tried to update it like 50 times (?) in a month
I think i have to return it.. Nice Samsung as always ._.
Click to expand...
Click to collapse
Download the firmware files and the latest Odin from updato.com flash pie through there, keep in mind you need to select the correct region for your firmware
rubenswing said:
Download the firmware files and the latest Odin from updato.com flash pie through there, keep in mind you need to select the correct region for your firmware
Click to expand...
Click to collapse
After starting the process it got stuck here..
alecaputo97 said:
After starting the process it got stuck here..
Click to expand...
Click to collapse
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Try to use the latest version of Odin (3.13.3) and do NOT put any pit file or re-partition
rubenswing said:
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Try to use the latest version of Odin (3.13.3) and do NOT put any pit file or re-partition
Click to expand...
Click to collapse
It worked! The problem was the outdated version of Odin, i was using 3.12 because it was the one listed on updato.com.. anyway thanks
alecaputo97 said:
It worked! The problem was the outdated version of Odin, i was using 3.12 because it was the one listed on updato.com.. anyway thanks
Click to expand...
Click to collapse
Glad to know it worked
Do not update to android pie. Many feature in your device will not run well. And you can't downgrade your android because the android pie lock the bootloader so you can't downgrade your version.. Trust me...