Database Info

[Q]Keep changes to audio hardware.

I need help reviewing my logs to find out what change I need to keep. I rooted my device(HTC One V) and for some reason the audio drivers were changed and now sound like crap. I have NEVER found a fix for this(if one could be suggested I'd be incredibly grateful). I did, however, while using the app "Sensor Music Player" notice that when I changed the app's settings to "pocket mode"(slapping pocket changes song) the audio drivers were changed and the music sounded waaay better(got my bass back!). Now every time the app closes the audio drivers are switched back and any other sound returns to sounding bad.
Long story short, I want to permanently change the audio hardware to use these settings; in turn making my sound better.
Here's my log, hopefully someone can find what its changing:
12-04 15:51:02.296 W/InputMethodManagerService(1721): Window already focused, ignoring focus gain of: [email protected] attribute=null
12-04 15:51:02.507 D/SensorDataHelper(30307): load ->id:2, prox(false), acc(true):{9999;9999;2350;30000}
12-04 15:51:02.507 D/ (30307): try to load preset while service is stopped
12-04 15:51:02.537 D/ (30307): SensorService onCreate()
12-04 15:51:02.557 D/ (30307): SensorService onStart()
12-04 15:51:02.557 D/ (30307): SensorService onStartCommand()
12-04 15:51:02.737 D/SensorDataHelper(30307): load ->id:2, prox(false), acc(true):{9999;9999;2350;30000}
12-04 15:51:02.777 D/SOUND_METER(30307): setAudioSource
12-04 15:51:02.777 E/AudioPolicyManagerBase(17539): profile found: device 400000, flags 0, samplingrate 8000, format 1, channelMask 16
12-04 15:51:02.777 D/AudioHardware7x30(17539): AudioHardware:penInputStream devices 400000 format 1 channels 16 samplerate 8000
12-04 15:51:02.777 I/AudioHardware7x30(17539): msm7x30_set_audpre_params not present
12-04 15:51:02.777 D/AudioHardware7x30(17539): AudioStreamInMSM7x30::standby()
12-04 15:51:02.787 D/AudioHardware7x30(17539): AudioStreamInMSM7x30::standby()
12-04 15:51:02.797 I/MPEG4Writer(17539): limits: 2147483647/0 bytes/us, bit rate: 12200 bps and the estimated moov size 3072 bytes
12-04 15:51:02.817 I/AudioHardware7x30(17539): do input routing device 400000
12-04 15:51:02.817 I/AudioHardware7x30(17539): Routing audio to Speakerphone
12-04 15:51:02.817 I/AudioHardware7x30(17539): msm7x30_set_audpre_params not present
12-04 15:51:02.817 D/AudioHardware7x30(17539): value of device and enable is 3 1 ALSA dev id:11
12-04 15:51:02.927 I/AudioHardware7x30(17539): do input routing device 400000
12-04 15:51:02.927 I/AudioHardware7x30(17539): Routing audio to Speakerphone
12-04 15:51:02.927 D/AudioHardware7x30(17539): new_rx = 6
12-04 15:51:02.927 D/AudioHardware7x30(17539): new_tx = 11
12-04 15:51:02.927 E/AudioHardware7x30(17539): updateDeviceInfo: E rx_device 2 and tx_device 3
12-04 15:51:02.927 D/AudioHardware7x30(17539): No active voicecall/playback, disabling cur_rx 2
12-04 15:51:02.927 D/AudioHardware7x30(17539): value of device and enable is 2 0 ALSA dev id:6
12-04 15:51:02.927 D/AudioHardware7x30(17539): case PCM_REC
12-04 15:51:02.927 E/AudioHardware7x30(17539): updateDeviceInfo: X cur_rx 2 cur_tx 3
12-04 15:51:03.457 I/MPEG4Writer(17539): setStartTimestampUs: 268525
12-04 15:51:03.457 I/MPEG4Writer(17539): Earliest track starting time: 268525
12-04 15:51:03.918 I/ActivityManager(1721): Start proc com.facebook.katana for service com.facebook.katana/.service.MediaUploadService: pid=30496 uid=10153 gids={3003, 1006, 1015, 1028}
12-04 15:51:03.948 I/dalvikvm(30496): Turning on JNI app bug workarounds for target SDK version 10...
also if someone can determine why my ROM and kernel are making my phone's audio sound like crap.... Put simply.... I'D PAY!
Phone Specs: build.board: primou
build.bootloader: 1.18.0000
build.brand: HTC
build.cpu_abi: armeabi-v7a
build.cpu_abi2: armeabi
build.device: primou
build.display: pa_primou-userdebug 4.1.2 JZO54K eng.icebox.20121018.083907 test-keys
build.fingerprint: htc_europe/htc_primou/primou:4.1.1/JRO03L/330937:user/release-keys
build.hardware: primou
build.host: icebox-desktop
build.id: JZO54K
build.manufacturer: unknown
build.model: One V
build.product: htc_primou
build.radio: unknown
build.serial: SH266TV05108
build.tags: test-keys
build.time: 1350538787000
build.type: userdebug
build.user: icebox
version.codename: REL
version.incremental: eng.icebox.20121018.083907
version.release: 4.1.2
version.sdk_int: 16

RK3066 device (Gemini Joytab) Custom rom?

After owning this tablet (to be specific the Gemini Joytab 9.7 duo 10313BK-rev2) for a number of months, I've kept my eyes peeled for custom rom development on this platform and seen nothing.
In the interest of kick starting something, I've noticed that there is development for numerous other RK3066 devices.
I'm knowledgeable in most things root related, but development is slightly beyond my knowledge at the moment.
Would roms such as this be compatible? Or maybe work after minor edits?:
http://forum.xda-developers.com/showthread.php?t=1922577
I can't be the only one who owns this device, and wants to improve it!
Specs Below:
Manufacturer: rockchip
Model: GEM10313BK
Android: 4.1.1; 20121122.163440; SDK16
Display: 1024 x 768; DPI: 160; Evaluated Size: 8.0"
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM: 1024 MB (926 MB available)
Flash: 16 GB Build-in (15.367 GB actual)
Processor: 2 cores; ARMv7 Processor rev 0 (v7l) rk30xx; Max: 1608.0 MHz; Min: 252.0 MHz
Communications
Phone: None
WiFi: wlan
USB Host: Yes
Bluetooth: Yes
GPS: No
Additional Features
Battery: Technology: Li-ion; Voltage: 3
Camera: Photo: 1.9 MP; Max: 1600x1200; Focus: fixed; No flash
Additional Camera: Photo: 0.3 MP; Max size: 640x480; Focus: fixed; No flash
Accelerometer: MMA8452Q 3-axis Accelerometer (Freescale Semiconductor); range: 0...39.24; resolution: 0.153 (0.391%); power: 0.2mA;
Magnetic field sensor: AK8975 3-axis Magnetic field sensor (Asahi Kasei); range: 0...2000; resolution: 0.062 (0.003%); power: 6.8mA;
Gyroscope: Corrected Gyroscope Sensor (Google Inc.); range: 0...34.907; resolution: 0.001 (0.004%); power: 13.1mA;
Proximity sensor: AL3006Proximity sensor (Dyna Image Corporation); range: 0...9; resolution: 9 (100%); power: 0.5mA;
Light sensor: AL3006 light sensor (Dyna Image Corporation); range: 0...10240; resolution: 1 (0.01%); power: 0.5mA;
Rotation vector sensor: Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 13.1mA;
Gravity sensor: Gravity Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Linear acceleration sensor: Linear Acceleration Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Vibrator: Yes
Supported languages: 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Auto Generated by: Spec Device (www.specdevice.com)

Stupidchavs said:
After owning this tablet (to be specific the Gemini Joytab 9.7 duo 10313BK-rev2) for a number of months, I've kept my eyes peeled for custom rom development on this platform and seen nothing.
In the interest of kick starting something, I've noticed that there is development for numerous other RK3066 devices.
I'm knowledgeable in most things root related, but development is slightly beyond my knowledge at the moment.
Would roms such as this be compatible? Or maybe work after minor edits?:
http://forum.xda-developers.com/showthread.php?t=1922577
I can't be the only one who owns this device, and wants to improve it!
Specs Below:
Manufacturer: rockchip
Model: GEM10313BK
Android: 4.1.1; 20121122.163440; SDK16
Display: 1024 x 768; DPI: 160; Evaluated Size: 8.0"
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM: 1024 MB (926 MB available)
Flash: 16 GB Build-in (15.367 GB actual)
Processor: 2 cores; ARMv7 Processor rev 0 (v7l) rk30xx; Max: 1608.0 MHz; Min: 252.0 MHz
Communications
Phone: None
WiFi: wlan
USB Host: Yes
Bluetooth: Yes
GPS: No
Additional Features
Battery: Technology: Li-ion; Voltage: 3
Camera: Photo: 1.9 MP; Max: 1600x1200; Focus: fixed; No flash
Additional Camera: Photo: 0.3 MP; Max size: 640x480; Focus: fixed; No flash
Accelerometer: MMA8452Q 3-axis Accelerometer (Freescale Semiconductor); range: 0...39.24; resolution: 0.153 (0.391%); power: 0.2mA;
Magnetic field sensor: AK8975 3-axis Magnetic field sensor (Asahi Kasei); range: 0...2000; resolution: 0.062 (0.003%); power: 6.8mA;
Gyroscope: Corrected Gyroscope Sensor (Google Inc.); range: 0...34.907; resolution: 0.001 (0.004%); power: 13.1mA;
Proximity sensor: AL3006Proximity sensor (Dyna Image Corporation); range: 0...9; resolution: 9 (100%); power: 0.5mA;
Light sensor: AL3006 light sensor (Dyna Image Corporation); range: 0...10240; resolution: 1 (0.01%); power: 0.5mA;
Rotation vector sensor: Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 13.1mA;
Gravity sensor: Gravity Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Linear acceleration sensor: Linear Acceleration Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Vibrator: Yes
Supported languages: 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Auto Generated by: Spec Device (www.specdevice.com)
Click to expand...
Click to collapse
i've got one of them too... great tablet but that's my problem with it as well that noone develops anything for it ...
i've managed to get CWM running on it... It came already rooted so no problems there if anyone could direct me to right location i might even be able to port something but that's a maybe...

sciux said:
i've got one of them too... great tablet but that's my problem with it as well that noone develops anything for it ...
i've managed to get CWM running on it... It came already rooted so no problems there if anyone could direct me to right location i might even be able to port something but that's a maybe...
Click to expand...
Click to collapse
It seems that there's work to move Cyanogenmod to RK30SDK/RK3066 devices
http://www.cm3066.com/
Custom recovery is a good start! Saw a thread which details CWM for our device, although I haven't flashed yet due to lack of custom roms to necessitate a custom recovery.
I'm unsure how compatible this particular project would be with our tablet though.
Any chance you could test, as you have a custom recovery installed?
Or has anyone else found a rom which might be easy to port?

help
Sir is there any custom rom for lava xtron plus etab
General Specifications
Manufacturer: rockchip
Model: JB7+
Android: 4.2.2; eng.dzy.20130506.194800; SDK17
Display: 1024 x 600; DPI: 160; Evaluated Size: 7.4"
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM: 1024 MB (928 MB available)
Flash: 8 GB Build-in (7.399 GB actual); 4 GB (3.680 GB actual)
Processor: 2 cores; ARMv7 Processor rev 0 (v7l) rk30xx; Max: 1608.0 MHz; Min: 252.0 MHz
Communications
Phone: None
WiFi: wlan
USB Host: Yes
Bluetooth: Yes
GPS: Yes
Additional Features
Battery: Technology: Li-ion; Voltage: 3
Camera: Photo: 1.9 MP; Max: 1600x1200; Focus: fixed; No flash
Camera 2: No
Accelerometer: Gravity sensor (Freescale Semiconductor); range: 0...39.24; resolution: 0.153 (0.391%); power: 0.2mA;
Magnetic field sensor: Compass Magnetic field sensor (Asahi Kasei); range: 0...2000; resolution: 0.062 (0.003%); power: 6.8mA;
Gyroscope: Corrected Gyroscope Sensor (Google Inc.); range: 0...34.907; resolution: 0.001 (0.004%); power: 13.1mA;
Proximity sensor: Proximity sensor (Dyna Image Corporation); range: 0...9; resolution: 9 (100%); power: 0.5mA;
Light sensor: Light sensor (Dyna Image Corporation); range: 0...10240; resolution: 1 (0.01%); power: 0.5mA;
Pressure sensor: Pressure sensor (ms5607); range: 0...110000; resolution: 1 (0.001%); power: 1mA;
Temperature sensor: Temperature sensor (ms5607); range: 0...110000; resolution: 1 (0.001%); power: 1mA;
Rotation vector sensor: Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 13.1mA;
Gravity sensor: Gravity Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Linear acceleration sensor: Linear Acceleration Sensor (Google Inc.); range: 0...19.613; resolution: 0.153 (0.782%); power: 13.1mA;
Vibrator: No
Supported languages: 51; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Icelandic; Italian; Japanese; Korean; Lithuanian; Latvian; Marathi; Malay; Norwegian; Dutch; Polish; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Thai; Filipino; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Auto Generated by: Spec Device (www.specdevice.com)

[Q] Help for another Android chinese phone

Hi all.
I've bought on Ebay a new Chinese Android 4.2 smartphone, it is identified as Alps X416 (I know that Alps it's a generic identification for something unknown/generic, not a real company...).
It's a strange but powerful phone (I choose it because it's cheap and Android 4.2): it has no SD internal card, but it can use a MicroSD as internal SD, so the space for app is really high...if link2sd could work at all, but it is not.
System appear S-ON, so apps are not really moved to SD, and system memory is very low, so I'm limited in using it and system became slow.
I Had no problem to root it and to install last busybox, but it's quite impossible to use ext2/3/4 filesystems for MicroSD, the original ROM doesn't support them.
I was searching for original ROM (as a backup), but specially a modified ROM (cyano seems not still supporting it, so I don't know what to choose for my phone).
This is Hardware Info' report:
Alps X416
System (Android 4.2.2)
Model X416
Manufacturer alps
Device hexing72_wet_lca
Product X416
Brand alps
Android Version 4.2.2 (Jelly Bean)
API Level 17
Build ID JDQ39
Fingerprint alps/hexing72_wet_lca/hexing72_wet_lca:4.2.2/JDQ39/1387451906:user/test-keys
Display (800x480)
Size 800x480
Refresh Rate 45 Hz
Default Orientation Portrait
Physical Size 5,83" (14,8 cm)
Logical Size Normal
Density 240 dpi (High)
Pixels Per Inch X: 160,42; Y: 160
Processor (ARMv7)
Processor ARMv7 Processor rev 3 (v7l)
Cores 2
Max Frequency 1001 Mhz
Instruction Sets armeabi-v7a, armeabi
SIMD Instructions NEON
Memory (217 MB)
System RAM 217 MB
JVM Max Memory 96 MB
Internal Storage 183 MB
External Storage 18422 MB (Removable)
Back Camera (1,9 megapixel)
Afeng Max Focus Step 0
Afeng Min Focus Step 0
Aflamp Mode Off
Aflamp Mode Values Off, On
Antibanding Off
Antibanding Values Off, 50hz, 60hz
Auto Exposure Lock Supported False
Auto Whitebalance Lock Supported False
Brightness_value 0
Burst Num 1
Cap Mode Normal
Cap Mode Values Normal, Face_beauty, Continuousshot
Capfname /sdcard/DCIM/cap00
Effect None
Effect Values None, Mono, Negative, Sepia, Sepiablue
Exposure Compensation 0
Exposure Compensation Step 1.0
Fb Sharp 0
Fb Sharp Max 4
Fb Sharp Min 4
Fb Skin Color 0
Fb Skin Color Max 4
Fb Skin Color Min 4
Fb Smooth Level 0
Fb Smooth Level Max 4
Fb Smooth Level Min 4
Flash Mode Off
Flash Mode Values Off, On, Auto, Torch
Focal Length 3.5
Focus Distances 0.95, 1.9, Infinity
Focus Mode Auto
Focus Mode Values Auto, Infinity, Continuous Picture, Continuous Video
Horizontal View Angle 55
Iso Speed Auto
Iso Speed Values Auto
Jpeg Quality 100
Jpeg Thumbnail Height 128
Jpeg Thumbnail Quality 100
Jpeg Thumbnail Size Values 0x0, 160x128, 320x240
Jpeg Thumbnail Width 160
Max Exposure Compensation 1
Max Num Detected Faces Hw 15
Max Num Detected Faces Sw 0
Max Num Focus Areas 0
Max Num Metering Areas 0
Max Zoom 10
Min Exposure Compensation 1
Mtk Cam Mode 0
Orientation 90
Picture Format Jpeg
Picture Format Values Jpeg
Picture Size 640x480
Picture Size Values 320x240, 640x480, 1024x768, 1280x720, 1280x768, 1280x960, 1600x1200
Preferred Preview Size For Video 1280x720
Preview Format Yuv420sp
Preview Format Values Yuv420sp, Yuv420p, Yuv420i Yyuvyy 3plane
Preview Fps Range 5000, 60000
Preview Fps Range Values (5000, 60000)
Preview Frame Rate 30
Preview Frame Rate Values 15, 30
Preview Size 640x480
Preview Size Values 176x144, 320x240, 352x288, 480x320, 480x368, 640x480, 720x480, 800x480, 800x600, 864x480, 960x540, 1280x720
Rotation 0
Scene Mode Auto
Scene Mode Values Auto, Night
Smooth Zoom Supported True
Vertical View Angle 49
Video Frame Format Yuv420i Yyuvyy 3plane
Video Size 640x480
Video Size Values 176x144, 480x320, 640x480, 864x480, 1280x720, 1920x1080
Video Stabilization False
Video Stabilization Supported False
Whitebalance Auto
Whitebalance Values Auto, Incandescent, Daylight, Cloudy Daylight, Fluorescent, Tungsten
Zoom 0
Zoom Ratios 100, 114, 132, 151, 174, 200, 229, 263, 303, 348, 400
Zoom Supported True
Zsd Mode Off
Zsd Mode Values Off
Front Camera (1,2 megapixel)
Afeng Max Focus Step 0
Afeng Min Focus Step 0
Antibanding Off
Antibanding Values Off, 50hz, 60hz
Auto Exposure Lock Supported False
Auto Whitebalance Lock Supported False
Brightness_value 0
Burst Num 1
Cap Mode Normal
Cap Mode Values Normal, Face_beauty, Continuousshot
Capfname /sdcard/DCIM/cap00
Effect None
Effect Values None, Mono, Negative, Sepia, Sepiablue
Exposure Compensation 0
Exposure Compensation Step 1.0
Fb Sharp 0
Fb Sharp Max 4
Fb Sharp Min 4
Fb Skin Color 0
Fb Skin Color Max 4
Fb Skin Color Min 4
Fb Smooth Level 0
Fb Smooth Level Max 4
Fb Smooth Level Min 4
Flash Mode Off
Flash Mode Values Off
Focal Length 3.5
Focus Distances 0.95, 1.9, Infinity
Focus Mode Auto
Focus Mode Values Auto, Infinity, Continuous Picture, Continuous Video
Horizontal View Angle 60
Iso Speed Auto
Iso Speed Values Auto
Jpeg Quality 100
Jpeg Thumbnail Height 128
Jpeg Thumbnail Quality 100
Jpeg Thumbnail Size Values 0x0, 160x128, 320x240
Jpeg Thumbnail Width 160
Max Exposure Compensation 1
Max Num Detected Faces Hw 15
Max Num Detected Faces Sw 0
Max Num Focus Areas 0
Max Num Metering Areas 0
Max Zoom 10
Min Exposure Compensation 1
Mtk Cam Mode 0
Orientation 270
Picture Format Jpeg
Picture Format Values Jpeg
Picture Size 640x480
Picture Size Values 320x240, 640x480, 1024x768, 1280x720, 1280x768, 1280x960
Preferred Preview Size For Video 1280x720
Preview Format Yuv420sp
Preview Format Values Yuv420sp, Yuv420p, Yuv420i Yyuvyy 3plane
Preview Fps Range 5000, 60000
Preview Fps Range Values (5000, 60000)
Preview Frame Rate 30
Preview Frame Rate Values 15, 30
Preview Size 640x480
Preview Size Values 176x144, 320x240, 352x288, 480x320, 480x368, 640x480, 720x480, 800x480, 800x600, 864x480, 960x540, 1280x720
Rotation 0
Scene Mode Auto
Scene Mode Values Auto, Night
Smooth Zoom Supported True
Vertical View Angle 40
Video Frame Format Yuv420i Yyuvyy 3plane
Video Size 640x480
Video Size Values 176x144, 480x320, 640x480, 864x480, 1280x720, 1920x1080
Video Stabilization False
Video Stabilization Supported False
Whitebalance Auto
Whitebalance Values Auto, Incandescent, Daylight, Cloudy Daylight, Fluorescent, Tungsten
Zoom 0
Zoom Ratios 100, 114, 132, 151, 174, 200, 229, 263, 303, 348, 400
Zoom Supported True
Zsd Mode Off
Zsd Mode Values Off
OpenGL 1.1 (Mali-400 MP)
General
Renderer Mali-400 MP
Version OpenGL ES-CM 1.1
Vendor ARM
Limits
Texture Size 4096x4096
Texture Units 8
Viewport Size 4096x4096
Modelview Stack Depth 32
Projection Stack Depth 32
Texture Stack Depth 32
Lights 8
Compressed Texture Formats
ETC1, Paletted
Extensions
GL_EXT_debug_marker GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_size_array GL_OES_point_sprite GL_OES_texture_npot GL_OES_query_matrix GL_OES_matrix_palette GL_OES_extended_matrix_palette GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_draw_texture GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_framebuffer_object GL_OES_stencil8 GL_OES_depth24 GL_ARM_rgba8 GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_OES_texture_cube_map GL_EXT_discard_framebuffer GL_EXT_robustness
OpenGL 2.0 (Mali-400 MP)
General
Renderer Mali-400 MP
Version OpenGL ES 2.0
Vendor ARM
GLSL Version OpenGL ES GLSL ES 1.00
Limits
Texture Size 4096x4096
Texture Units 8
Vertex Textures 0
Combined Textures 8
Viewport Size 4096x4096
Renderbuffer Size 4096x4096
Cubemap Size 1024x1024
Vertex Attributes 16
Vertex Uniforms 256
Varying Vectors 12
Fragment Uniforms 256
Vertex Numeric Precision
Int [-2^24, 2^24]
Float [-2^127, 2^127], 2^-23
Fragment Numeric Precision
Low Int [-2^11, 2^11]
Medium Int [-2^11, 2^11]
High Int Not available
Low Float [-2^15, 2^15], 2^-10
Medium Float [-2^15, 2^15], 2^-10
High Float Not available
Compressed Texture Formats
ETC1
Extensions
GL_EXT_debug_marker GL_OES_texture_npot GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness
Graphic Modes (RGBA 32bit)
RGB 16bit (565)
RGB 16bit (565), Depth 24bit, Stencil 8bit
RGB 16bit (565), Depth 24bit, Stencil 8bit, Samples x4
RGB 16bit (565), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
RGBA 16bit (5551), Depth 24bit, Stencil 8bit
RGBA 16bit (5551), Depth 24bit, Stencil 8bit, Samples x4
RGBA 16bit (5551), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
RGBA 16bit (4444), Depth 24bit, Stencil 8bit
RGBA 16bit (4444), Depth 24bit, Stencil 8bit, Samples x4
RGBA 16bit (4444), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
RGB 32bit (888)
RGB 32bit (888), Depth 24bit
RGB 32bit (888), Depth 24bit, Stencil 8bit
RGBA 32bit (8888)
RGBA 32bit (8888), Depth 24bit, Stencil 8bit
RGBA 32bit (8888), Depth 24bit, Stencil 8bit
RGBA 32bit (8888), Depth 24bit, Stencil 8bit
RGBA 32bit (8888), Depth 24bit, Stencil 8bit, Samples x4
RGBA 32bit (8888), Depth 24bit, Stencil 8bit, Samples x16, Non-Conformant
Sensors (3)
KXTJ2-1009 3-axis Accelerometer
Vendor Kionix
Range 32.0 m/s²
Resolution 0.00390625 m/s²
Power 0.13 mA
AKM8963 Orientation sensor
Vendor AKM
Range 360.0°
Resolution 1.0°
Power 0.25 mA
AKM8963 3-axis Magnetic Field sensor
Vendor AKM
Range 600.0 μT
Resolution 0.0016667 μT
Power 0.25 mA
Codecs (34)
OMX.MTK.AUDIO.DECODER.MP3
Media type: audio/mpeg
OMX.MTK.AUDIO.DECODER.AMR.NB
Media type: audio/3gpp
OMX.MTK.AUDIO.DECODER.AMR.WB
Media type: audio/amr-wb
OMX.MTK.AUDIO.DECODER.ADPCM
Media type: audio/x-adpcm-ms
OMX.MTK.AUDIO.DECODER.ADPCM
Media type: audio/x-adpcm-dvi-ima
OMX.MTK.AUDIO.DECODER.RAW
Media type: audio/raw
OMX.MTK.AUDIO.DECODER.AAC
Media type: audio/mp4a-latm
OMX.MTK.AUDIO.DECODER.G711
Media type: audio/g711-alaw
OMX.MTK.AUDIO.DECODER.G711
Media type: audio/g711-mlaw
OMX.MTK.AUDIO.DECODER.VORBIS
Media type: audio/vorbis
OMX.MTK.AUDIO.DECODER.FLAC
Media type: audio/flac
OMX.MTK.AUDIO.DECODER.APE
Media type: audio/ape
OMX.MTK.VIDEO.DECODER.MPEG4
Media type: video/mp4v-es
Color Formats: 0x7f000200
Profiles: Simple (0), Simple (0b), Simple (1), Simple (2), Simple (3), Simple (4), Simple (4a), Simple (5), AdvancedSimple (0), AdvancedSimple (0b), AdvancedSimple (1), AdvancedSimple (2), AdvancedSimple (3), AdvancedSimple (4), AdvancedSimple (4a), AdvancedSimple (5), Main (0), Main (0b), Main (1), Main (2), Main (3), Main (4)
OMX.MTK.VIDEO.DECODER.H263
Media type: video/3gpp
Color Formats: 0x7f000200
Profiles: Baseline (10), Baseline (20), Baseline (30), Baseline (40), Baseline (45), Baseline (50), Baseline (60), Baseline (70)
OMX.MTK.VIDEO.DECODER.AVC
Media type: video/avc
Color Formats: 0x7f000200
Profiles: Baseline (1), Baseline (1b), Baseline (11), Baseline (12), Baseline (13), Baseline (2), Baseline (21), Baseline (22), Baseline (3), Baseline (31), Baseline (32), Baseline (4), Baseline (41), Baseline (42), Baseline (5), Baseline (51), Main (1), Main (1b), Main (11), Main (12), Main (13), Main (2), Main (21), Main (22), Main (3), Main (31), Main (32), Main (4), Main (41), Main (42), Main (5), Main (51), High (1), High (1b), High (11), High (12), High (13), High (2), High (21), High (22), High (3), High (31), High (32), High (4), High (41), High (42), High (5), High (51)
OMX.MTK.VIDEO.DECODER.VPX
Media type: video/x-vnd.on2.vp8
Color Formats: 0x7f000200
OMX.MTK.VIDEO.DECODER.VC1
Media type: video/x-ms-wmv
Color Formats: 0x7f000200
OMX.MTK.VIDEO.DECODER.DIVX
Media type: video/divx
Color Formats: 0x7f000200
Profiles: 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8
OMX.MTK.VIDEO.DECODER.DIVX3
Media type: video/divx3
Color Formats: 0x7f000200
Profiles: 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8
OMX.MTK.VIDEO.DECODER.XVID
Media type: video/xvid
Color Formats: 0x7f000200
Profiles: 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8000, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8
OMX.google.aac.decoder
Media type: audio/mp4a-latm
OMX.MTK.VIDEO.DECODER.MJPEG
Media type: video/x-motion-jpeg
Color Formats: 32bitARGB8888
OMX.MTK.VIDEO.ENCODER.MPEG4
Media type: video/mp4v-es
Color Formats: YUV420Planar, Surface, 0x7f000200, YUV420Planar
Profiles: Simple (0), Simple (0b), Simple (1), Simple (2), Simple (3)
OMX.MTK.VIDEO.ENCODER.H263
Media type: video/3gpp
Color Formats: YUV420Planar, Surface, 0x7f000200, YUV420Planar
Profiles: Baseline (10)
OMX.MTK.VIDEO.ENCODER.AVC
Media type: video/avc
Color Formats: YUV420Planar, Surface, 0x7f000200, YUV420Planar
Profiles: Baseline (1), Baseline (1b), Baseline (11), Baseline (12), Baseline (13), Baseline (2), Baseline (21), Baseline (22), Baseline (3), Baseline (31), High (1), High (1b), High (11), High (12), High (13), High (2), High (21), High (22), High (3), High (31), High (32), High (4), High (41)
OMX.MTK.AUDIO.ENCODER.AMR
Media type: audio/3gpp
OMX.MTK.AUDIO.ENCODER.AWB
Media type: audio/amr-wb
OMX.MTK.AUDIO.ENCODER.AAC
Media type: audio/mp4a-latm
OMX.MTK.AUDIO.ENCODER.VORBIS
Media type: audio/vorbis
OMX.MTK.AUDIO.ENCODER.ADPCM
Media type: audio/x-adpcm-ms
OMX.MTK.AUDIO.ENCODER.ADPCM
Media type: audio/x-adpcm-dvi-ima
OMX.google.flac.encoder
Media type: audio/flac
AACEncoder
Media type: audio/mp4a-latm
OMX.google.raw.decoder
Media type: audio/raw
Features (26)
Graphics
OpenGL 2.0
Android Hardware
android.hardware.bluetooth
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.sensor.compass
android.hardware.telephony
android.hardware.telephony.gsm
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
Android Software
android.software.live_wallpaper
Phone has FM radio too..If anyone has some ideas about any ROM I could use instead of originial, I'll apprecaite a lot!
Thanks in advance.

i also have the exact same handset and i am also looking for firmware... have you had any success since may lol??

You could try and root the app and download busybox and you can have space for everything.
Sent from my Q1000 Opus2 using XDA Free mobile app

Faster Android Mobile
Getting suitable ROMs for china android mobiles are little bit difficult. If you flashed unsupported rom, your mobile will get bricked. Till you flash custom rom, make your device fine.
First you may root your device. For rooting china android mobiles first of all download Moboginie or pdanet on your pc, connect your device to pc it will install drivers automatically for your device. Then download and install "VRoot" latest version on pc, connect mobile, vroot will find your device. Click on root, after 5 to 10 seconds your mobile will be rooted.
Now download Minitool Partion Wizard for partition your sd you may search thread for partition sd. Create fat32 partition around 1gb. This will be your ext2 partition on sd card. Now download and install Link2sd on your mobile. Run Link2sd if 2nd partition will not detected by link2sd. Install and Open Root Explorer, go to system/etc/install-recovery.sh, if there is no such file then create it. In install-recovery.sh file type this lines.
#!/system/bin/sh
#added by link2sd
LOG=/data/link2sd-install-recovery.log
echo "$(date) mounting..." > $LOG
mount -t vfat -o rw /dev/block/vold/179:2 /data/sdext2 1>>$LOG 2>>$LOG
mount -t vfat -o rw /dev/block/mmcblk0p2 /data/sdext2 1>>$LOG 2>>$LOG
mount >> $LOG
echo "$(date) mount finished" >> $LOG
echo "$(date) mount finished" >> $LOG
For more details go here for solution. Now your mobile got sufficient internal storage. Now download Ram Expander and install, set swap file size as you wish and run swap, now you will get more ram on your device.
Enjoy faster android device.

[Completed] Need help optimising smart TV running android OS?

Hi
I have a JVC LT32N630S Smart Android TV. Its a budget smart TV and it runs slow.
There are apps on it that I don't use like Skype, Twitter and Facebook. I would like to disable them(to free up ram) but the settings app does have this feature (although it is android 4.0.4). I want to use YouTube but doesn't seem to load videos and sometimes doesn't start( I am connected to an ADSL line via WiFi ).
So I would like to know what I can do to optimize its performance and get to properly use YouTube app (preferably a no root option but root options welcome if someone can help with rooting the device). I'm interested in learning more about android customization and development.
I've used 'Spec Device' app to get these specification details
General Specifications
Manufacturer: MStar Semiconductor, Inc.
Model: 608p83
Android: 4.0.4; 1.0.0.2; SDK15
Display: 1280 x 720; DPI: 160; Evaluated Size: 9.2"
Touch Screen: NOT multitouch 1 point
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM: 367 MB
Flash: 4 GB (3.688 GB actual)
Processor: 1 core; ARMv7 Processor rev 0 (v7l) eagle
Communications
Phone: None
WiFi: mlan_8188eus; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB Host: Yes
Bluetooth: no
GPS: Yes
Additional Features
Battery: Technology: null; Voltage: 0
Camera: Photo: 0.3 MP; Max: 640x480; Video: 0.3 MP; Max: 640x480; Focus: auto; Flash modes: auto
Camera 2: No
Accelerometer: Accelerometer sensor (Accelerometer sensor); range: 0...10240; resolution: 1 (0.01%); power: 0.5mA;
Vibrator: No
Supported languages: 40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
Auto Generated by: Spec Device (www_specdevice_com)
Thanks in advance

Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the links bellow for more answers from the experts but first register an account on XDA:
[Ask Any Question][Newbie Friendly]
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

ViPER4Android Phone Speaker EQ Profile

This is an EQ profile for v4a's EQ bands from a moto g6 plus running Android Pie and Dolby audio in Music mode. Taken with a Dayton EMM6 with Room EQ Wizard. I have Impulse Responses (for convolution) for the same target curves but can't link to them because of XDA rules.
House curve target (1.8dB/octave rise from 100Hz to 20Hz, 1.8dB/octave fall from 1 kHz to 20 kHz):
The house curve sounds warmer than the flat curve.
Frequency Gain
31 Hz 12.0 dB
63 Hz 10.8 dB
125 Hz 8.5 dB
250 Hz -4.1 dB
500 Hz -2.3 dB
1 kHz -11.6 dB
2 kHz 2.8 dB
4 kHz -1.5 dB
8 kHz -9.3 dB
16 kHz 12.0 dB
Flat target:
Frequency Gain
31 Hz 12.0 dB
63 Hz 10.8 dB
125 Hz 8.5 dB
250 Hz -4.1 dB
500 Hz -2.2 dB
1 kHz -12.0 dB
2 kHz 4.4 dB
4 kHz -0.8 dB
8 kHz -1.4 dB
16 kHz 12.0 dB