CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM 13 for Jiayu S3 plus (not advanced or basic), with mt6753 soc
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose Arm64 and Android 6.0
boot to recovery
wipe data if you are not coming from CM13.0 already
install rom and gapps
reboot
XDA:DevDB Information
Cyanogenmod for Jiayu S3 plus, ROM for all devices (see above for details)
Contributors
DerTeufel1980, superdragonpt, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
Reserved
Reserved
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
Woot! Glad to see this up and running Thanks for all the support!
Full CM13 Android in Mediatek phone. Thank you
edit: fixedd
Hi, first of all I would like to say thank u for all your hardwork
I have came across on the specifications page for Mediatek's MT6753 well which was our chipset anyway.
http://www.mediatek.com/en/products/mobile-communications/smartphone1/mt6753/
The CPU clock speed stated on the page was 1.5ghz. Ours was max clocked at 1.3ghz?
Is there any possibility, (not sure if our mtk kernel source is open) that we could get a speedboost, a step up of 200mhz for our cpu?
Or was the 1.5ghz version is already stable and has a chance to boost it up to MT6572's 1.7ghz as well.
I would be glad if anyone can enlighten me about this. Thank you.
Thankyou!!!!
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
makona said:
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
Click to expand...
Click to collapse
1- Known issue, thanks for the BT unit details
2- already answered
3- seems you find the cause, FB apps sucks... Thank them
Sorry guys but what is this?
http://www.needrom.com/download/s3-cm13-0/
It's baptized CM13. 0 from JiaYu.de for S3plus.
Is it other Rom, or someone tries to play it "smart" to the community?
TapaTalk and JiaYu S3 with Android MM!
Having used this for a few days now I love it however I have discovered one bug and one suggestion for better quality of life.
Bug: The aeroplane mode in the power menu (press and hold power button) doesn't work. The tile in the drop down menu still works fine, just the power menu one doesn't.
Quality of Life: Currently there is no way of disabling both sims, one always has to be enabled. Not a big deal for most people, but as someone who travels between countries quite frequently, it would be nice to be able to switch one sim off before putting on the other to avoid any possible roaming charges.
Thanks again for all the support, I was also wondering what version of Xposed would work with CM13?
Regards,
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
DerTeufel1980 said:
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
Click to expand...
Click to collapse
No bother I only noticed the airplane mode thing when I was trying to activate it boarding my flight haha
Wow, so this is what you meant when you said
DerTeufel1980 said:
Yeah, I started working for a German section of Chinese smartphone manufacturer (jiayu.de). Didn't have time anymore....
Click to expand...
Click to collapse
Good job anyways!
Update:
https://www.facebook.com/MediatekAndroidDevelopers/
Build 2 : 20160810
Source Synced ( (including Security Updates )
Fixed: Bluetooth (headset , car-BT)
Fixed: Internal Android VPN Client (tested on PPPT protocol)
Fixed Wi-Fi (random connection drops)
Added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
Fixed FMRadio (merged previous patch)
Rom link on xda DevDB as well
cheers
Latest twrp recovery, compiled from source:
https://www.androidfilehost.com/?fid=24591000424954599
- fix: mounting adoptable storage
- fix: mounting encrypted devices
The M.A.D. Team
still hoping for an update for this rom Found bugs: Music playback lag and video playing lags.. can't play 1080p videos
Everything is perfect but the BT-CAR....
Its a Citroen C-Elysée 2014
Hi,
Here you can test my new app Android:
Title : Anti Mosquito
Anti Mosquito is a free application that allows mosquitoes to escape by emitting high frequency sounds inaudible to humans!
The application is very simple, you can activate or deactivate the anti mosquito with a simple On / Off button.
You have the choice of the frequencies among these:
- 8 kHz
- 10 kHz
- 12 kHz
- 14 kHz
- 15 kHz
- 16 kHz
- 17 kHz
- 18 kHz
- 19 kHz
- 20 kHz
- 21 kHz
- 22 kHz
It is normal that you will not hear certain frequencies, but the application emits a sound that is noticeable by mosquitoes.
✪✪ How does it work? ✪✪
1) Press the On / Off button to activate the mosquito repellent
2) Choose the frequency sound you want the application to emit by clicking on it
3) At this time, the anti mosquito is operational and will loop a high frequency sound
4) To stop the anti mosquito, simply click on the On / Off button
5) When you want to switch to another frequency, first press the frequency that is playing and then press another frequency
5a) Example: I pressed the 10 kHz frequency to activate it. If I want to test the frequency 12 kHz, I first press the frequency 10 kHz to stop it, then I press the 12 kHz frequency to activate it on it.
Google Play : https://play.google.com/store/apps/details?id=com.sospc95.Anti_Moustique
Install it and test it
Thanks
Nice icon! I think it made your app popular
Thanks
Sounds nice. I never knew that you can use a simple android app to fight against mosquitoes. I am living near the forest, and in the summer we are literally attacked by mosquitoes. My dad bought a Mosquito Magnet to deal with them, and this thing seems to help. By the way, I have an interesting question. What should I do if I have an iPhone? Are there similar apps on the IOS system, or you can use these apps only on android. I am really curious about this. I am waiting for your message.
I can sorta imagine Anti Mosquito 2.0 - an app that plays Scary Monsters and Nice Sprites from Youtube. /s