Can you run some benchmarks and post results?
I am interested in Antutu benchmark full results (not just overall number but numbers per tested components). Other benchmarks may be interesting too.
Antutu link: https://market.android.com/details?id=com.antutu.ABenchMark
memory 312
cpu integer 661
cpu float 282
2d 145
3d 198
DB IO 65
SDcard W 47
SDcard R 179
total 1889
Thank you.
Just for comparison, here are values on my HTC Desire (not S, up to date android 2.2 as provided by HTC updates; with original microSD card which is quite slow). First value is from the first run, the second value after slash is from second run:
memory 277 / 282
cpu integer 617 / 622
cpu float 265 / 266
2d 158 / 169
3d 121 / 123
DB IO 75 / 80
SDcard W 29 / 29
SDcard R 17 / 17
total 1559 / 1588
My Scores
memory 288
cpu integer 648
cpu float 272
2d 145
3d 198
DB IO 70
SDcard W -- (seemed to crash at that point)
SDcard R --
total ---
mem 304
cpu int 658
cpu float 280
2s graphics 145
3d graphics 197
database IO 60
sd write 44
sd read 180
total 1868
nexus one 2.3.3 miui rom benchmarks overclocked to 1113mhz....(tiamet 3.3.8 kernel)
mem 356
cpu int 702
cpu float 292
2d graphics 151
3d graphics 209
database IO 235
sd write 33 (dep on sd card)
sd read 56 (-do-)
total 2034
thus the desire s has still (in stock condition) great scores
scores are greater on nexus due to overclock and all kernel modules..
when desire s would be overclocked ,i guess it'll get greater scores than nexus one (obviously)...............
Memory 312
CPU Int 661
CPU Float 282
2D Graphics 145
3D Graphics 199
Database IO 75
SD Write 57
SD Read 93
Total 1824
My SD read seems slow.
CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of CM 13 for Jiayu S3 plus (not advanced or basic), with mt6753 soc
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download rom from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR from xda DevDB (DOWNLOAD Tab)
Download Gapps from OpenGapps: http://opengapps.org/, choose Arm64 and Android 6.0
boot to recovery
wipe data if you are not coming from CM13.0 already
install rom and gapps
reboot
XDA:DevDB Information
Cyanogenmod for Jiayu S3 plus, ROM for all devices (see above for details)
Contributors
DerTeufel1980, superdragonpt, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
Reserved
Reserved
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
Woot! Glad to see this up and running Thanks for all the support!
Full CM13 Android in Mediatek phone. Thank you
edit: fixedd
Hi, first of all I would like to say thank u for all your hardwork
I have came across on the specifications page for Mediatek's MT6753 well which was our chipset anyway.
http://www.mediatek.com/en/products/mobile-communications/smartphone1/mt6753/
The CPU clock speed stated on the page was 1.5ghz. Ours was max clocked at 1.3ghz?
Is there any possibility, (not sure if our mtk kernel source is open) that we could get a speedboost, a step up of 200mhz for our cpu?
Or was the 1.5ghz version is already stable and has a chance to boost it up to MT6572's 1.7ghz as well.
I would be glad if anyone can enlighten me about this. Thank you.
Thankyou!!!!
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
makona said:
@superdragonpt
Not sure if this is the right thread to report issues of the ROM.
1. Bluetooth not pairing with car. It can detect the headunit but when I try to pair after i enter the pin it fails. I am using the headunit for mitsubishi mirage 2013
Mirage CNE-6515-N HU Specs:
Main Amplifier:
Power Output: 20 Watts RMS x 4 channels into 4-ohms @ < 10 % THD+N
S/N Ratio: 70 dBA below reference. (Ref.: 1 Watt, 4-ohms)
Max Power: 40 x 4 watts into 4-ohms, all channels driven
Frequency Response: 20 Hz to 20 kHz -3dB Aux input used as source reference
3 Band Equalizer (Treble, Mid, Bass)
Reference Supply Voltage: 14.4 VDC
DVD/CD Player:
Compatible Formats: DVD-R, , DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, HDCD, SVCD,VCD, MPEG, JPEG, MP3/WMA burned into a DVD+RW or DVD-RW and CD-R/RW
S/N Ratio: 85 dBA
Dynamic Range: > 95 dB
Frequency Response: 20 Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 KHZ
D/A Converter(s): 6-channels high performance 24-bit, 192 kHz, multi-bit Sigma Delta modulation. DAC supports sample rates from 8-192 kHz.
Electronic Skip Protection (ESP): DVD: 2-3 sec, CD-DA: 10 sec., MP3: 100 sec., WMA: 200 sec. (ESP time approximate)
Mechanical vibration stability: 10-200Hz, X/Y/Z direction: 1.0G
Video Section:
Format: NTSC, PAL (auto-detect)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM Tuner Section:
Tuning Range: 87.5 MHz - 107.9 MHz
Mono Sensitivity (-30dB): 10 dBu
Quieting Sensitivity (-50dB): 15 dBu
Alternate Channel Sensitivity: 70 dB
S/N Ratio @ 1KHz: 58 dB
Image Rejection: 60 dB
Stereo Separation @ 1 KHz; 30dB
Frequency Response: 30Hz - 15 KHz, -3 dB
AM Tuner Section:
Tuning Range: 530 kHz - 1710 kHz
Sensitivity (-20dB): 20 dBu
S/N Ratio @ 1KHz: 50 dB
Image Rejection: 60 dB
Frequency Response: 50Hz - 2 KHz, -3 dB
Monitor Section:
Screen Size: 6.2" (Measured diagonally)
Screen Type: TFT Digital Display active matrix
Response Time: 30 ms rise time, 50 ms fall tim/Compositee resolution, DVD
Video in: 280,280 sub pixels, 1200 (W) x 234 (H)
Built-in Navigation (Via Micro SD Card)
SD Card: Micro SD
GPS
SiRF Prima 600MHZ CPU, Advanced ARM 11 Architecture
256 MB Nand Flash
256 MB DDR-400MHz RAM
Windows CE 6.0
USB
High-Speed USB 2.0
Bluetooth:
Hands-Free, Phonebook, Recent Calls (Dialed, Missed, Received) Synchronize, Caller ID and Audio Streaming, Mobile Phone
TPMS Ready (optional)
General:
Auxiliary Input impedance: 10 K-ohms
Power Supply: 10.5 to 16 VDC, negative ground
Fuse: 10-amp, mini ATm type
DN chassis dimensions : 7"x7"x 2" (178mm x 178mm x 100mm)
2. When SD card is used as "Internal Storage" and app is installed at SD card, every time I reboot all the shortcut icon disappears in Home Screen.
3. FB Messenger hangs when uploading pictures. Workaround grant permissions via Settings > App > Messenger
Click to expand...
Click to collapse
1- Known issue, thanks for the BT unit details
2- already answered
3- seems you find the cause, FB apps sucks... Thank them
Sorry guys but what is this?
http://www.needrom.com/download/s3-cm13-0/
It's baptized CM13. 0 from JiaYu.de for S3plus.
Is it other Rom, or someone tries to play it "smart" to the community?
TapaTalk and JiaYu S3 with Android MM!
Having used this for a few days now I love it however I have discovered one bug and one suggestion for better quality of life.
Bug: The aeroplane mode in the power menu (press and hold power button) doesn't work. The tile in the drop down menu still works fine, just the power menu one doesn't.
Quality of Life: Currently there is no way of disabling both sims, one always has to be enabled. Not a big deal for most people, but as someone who travels between countries quite frequently, it would be nice to be able to switch one sim off before putting on the other to avoid any possible roaming charges.
Thanks again for all the support, I was also wondering what version of Xposed would work with CM13?
Regards,
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
DerTeufel1980 said:
Hey, sorry, I missed your pm.
I need to check airplane mode.... Didn't notice yet.
The other thing isn't meant to be done this way in aosp. I may take a look at it as well, but I can't promise...
The M.A.D. Team
Click to expand...
Click to collapse
No bother I only noticed the airplane mode thing when I was trying to activate it boarding my flight haha
Wow, so this is what you meant when you said
DerTeufel1980 said:
Yeah, I started working for a German section of Chinese smartphone manufacturer (jiayu.de). Didn't have time anymore....
Click to expand...
Click to collapse
Good job anyways!
Update:
https://www.facebook.com/MediatekAndroidDevelopers/
Build 2 : 20160810
Source Synced ( (including Security Updates )
Fixed: Bluetooth (headset , car-BT)
Fixed: Internal Android VPN Client (tested on PPPT protocol)
Fixed Wi-Fi (random connection drops)
Added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
Fixed FMRadio (merged previous patch)
Rom link on xda DevDB as well
cheers
Latest twrp recovery, compiled from source:
https://www.androidfilehost.com/?fid=24591000424954599
- fix: mounting adoptable storage
- fix: mounting encrypted devices
The M.A.D. Team
still hoping for an update for this rom Found bugs: Music playback lag and video playing lags.. can't play 1080p videos
Everything is perfect but the BT-CAR....
Its a Citroen C-Elysée 2014