Flashback:
I rooted my Alcatel One Touch Pop C5 (5036D) using framaroot and it works fine and i encountered bootloop due to changing fonts. I fixed my phone by using hard reset (i have no CWM and TWRP installed) and there was an option of wipe dalvik cache so it fixed my phone by formatting my phone. Three months later when i woke up in the morning my phone is turned off idk why, so when i turned it on, it is in bootloop again ;-; . So i have to reset it again (i have no CWM and TWRP installed) but there was no dalvik cache option nor advance option so my phone is not fixed. The next day at school i asked my friend how to fix bootloop, he said i must flash my phone using odin. I searched my phone's stock rom and found none. I only found custom rom and it is a "GE kitkat alcatel pop c5 rom".
FYI
I don't know we have to install CWM recovery after rooting phone
Present:
So can you guys assist me how to flash Alcatel Pop C5 (5036D) using odin? and I have no odin software so can you guys tell me how to get odin?
P.S if you guys have Alcatel One Touch Pop C5 (5036D) stock rom can you guys upload it to me or share the website of the phone stock rom?
XDA Visitor said:
Flashback:
I rooted my Alcatel One Touch Pop C5 (5036D) using framaroot and it works fine and i encountered bootloop due to changing fonts. I fixed my phone by using hard reset (i have no CWM and TWRP installed) and there was an option of wipe dalvik cache so it fixed my phone by formatting my phone. Three months later when i woke up in the morning my phone is turned off idk why, so when i turned it on, it is in bootloop again ;-; . So i have to reset it again (i have no CWM and TWRP installed) but there was no dalvik cache option nor advance option so my phone is not fixed. The next day at school i asked my friend how to fix bootloop, he said i must flash my phone using odin. I searched my phone's stock rom and found none. I only found custom rom and it is a "GE kitkat alcatel pop c5 rom".
FYI
I don't know we have to install CWM recovery after rooting phone
Present:
So can you guys assist me how to flash Alcatel Pop C5 (5036D) using odin? and I have no odin software so can you guys tell me how to get odin?
P.S if you guys have Alcatel One Touch Pop C5 (5036D) stock rom can you guys upload it to me or share the website of the phone stock rom?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Your friend must be a Samsung fan. Unless I missed something, Odin is only an option for Samsung devices.
At any rate, this thread should be all you need in terms of stock:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] Alcatel One Touch Pop C5 soft brick
Hope this helps, and good luck!
Related
Hi all,
My zte v987 is rooted and got stuck on zte logo boot.
Before it got stuck i was playing around with an app called "freedom" that hacks in app purchases. I went into settings and turned on the "freecore" it rebooted itself after and got stuck on zte logo forever. I am able to go into recovery mode but i dont have custom recovery installed i also dont have a backup of my stock rom or any kind of backup. I am clueless about flashing so i will really need a step by step instruction. I also tried resseting my phone back to factory settings but nothing happened. I also read some threads about flashing recovery using adb and fastboot but since im a noob on android i turned off (I dont know if you need it)usb debugging mode before this all happened and i dont know what to do now. I need help
Thanks in advance
Buddy this guide may help u
Flash this custom rom may solve ur issue
http://romsforandroids.blogspot.com/2013/08/rom03-08-2013-zte-v987-mt6589-custom.html
[emoji41]
Sent from my GT-S5282 using Tapatalk
I own a ZTE Blade G 4.1.2 Android device , i recently installed a stock Belgium ROM from the ZTE official site .
I installed it straight from the phone it didnt require CWM , so I installed it straight from settings -> developer settings -> install update from SD Card . The installation went smoothly , i was very satisfied. I then rooted it. And then because i'm very smart of course , i decided that my speakers need a 'boost' so i downloaded an app called Beats Audio Installer . The app installed and then asked for a reboot. It rebooted and it's stuck on the ZTE Logo . From what i've heard i need to have a custom recovery so that i could do anything , which i don't . I can go in to the stock recovery fine , i tried installing the rom again from the stock one but it just says install /sdcard and then shuts off . Im guessing it's some sort of a verification process which this Rom isn't passing . Please Help , i'm a total noob at this.
Hi, thank you for using XDA Assist. You might have to start by bringing your device back to stock. See this, http://forum.xda-developers.com/showthread.php?t=2163493 And if you have further question you can hopefully find then here, http://forum.xda-developers.com/zte-blade
I resolved my issue by downloading the stock firmware that came with the phone from the ZTE website , installed it in the stock recovery , then after installed back to the belgium and installed the clockwork mod . Thank you for your response , even though my device is Zte Blade G , not Zte Blade , but still
I'm glad you got it fixed.
Thread closed.
So here's what I did:
My phone got kinda full of things so I wanted to reset it so I did it from the settings on the phone
it succeded but google play wasn't working so I had to mount R/W and blablablabla don't even know how I managed to do it but here's what happened:
My phone got stuck when powering up at ALLVIEW logo and when I try to wipe data/factory reset from CWM it succeds but when I press reboot system now it says I don't have root and the Yes option is replaced with Install Root. At this point whatever I press , either No , Go back or Install Root , it restarts and goes up to the logo.
Tried :
Almost everything , like I downloaded this Rooted Deodexed Primo S2 firmware and put it on my SD card but in the CWM recovery it won't detect it as it seems.
Any ideeas ? I really am in a dillema and I hope I didn't brick my phone. Please help me xda !
oh btw , the phone gets charged , if it matters.
bump- Sorry for fast bump but I dont want this to get lost and I really need help :/
bump..
bump...
Hi,
Thanks for using XDA Assist Please post here [FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers so that experts using your device may help you more accurately
Good luck!
Hey, i m new to xda.
I have a query that i tried to install custom recovery of samasung galaxy star in my xolo prime..... after the installation it jst rebooted and my touch is not responding..... the phone is going in all modes like recovery mode, fastboot mode, and even i hard reset my phone but the touch is still not responding.... i couldnt flash anything even stock rom in my phone... is this the touch problem or my software problem plz anybody help me its a real emergencyy.......
Hey guys! a friend of mine got an Alcatel Pixi3/4013D that was Rooted using Kingroot on PC. After uninstalling some system elements i think, the phone sticks to a white screen on boot.
Tried Factory reset right after but it didn't fix it.
Used Alcatel Mobile Upgrade 4.3.9 to reinstall: I can hear the boot up sound but the screen remains totally white (light)
and i can no longer boot in recovery.... Don't have custom recovery.
Not sure about it but i believe it was running on KitKat
That's it! Got some leads to fix this?
Thanks in advance!
Thread closed as youve found your way to the Alcatel One Touch Pixi 3 Official Thread
That is the best place for others to help you out with your problem
Thanks and good luck