Database Info

[Q] Bricked Kross GY-601 Chinese Tablet

Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..

Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel

I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..

I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:

Help me unbrick ZTE V987 rooted stuck on zte logo boot help!

Hi all,
My zte v987 is rooted and got stuck on zte logo boot.
Before it got stuck i was playing around with an app called "freedom" that hacks in app purchases. I went into settings and turned on the "freecore" it rebooted itself after and got stuck on zte logo forever. I am able to go into recovery mode but i dont have custom recovery installed i also dont have a backup of my stock rom or any kind of backup. I am clueless about flashing so i will really need a step by step instruction. I also tried resseting my phone back to factory settings but nothing happened. I also read some threads about flashing recovery using adb and fastboot but since im a noob on android i turned off usb debugging mode(I dont know if its needed) before this all happened and i dont know what to do now. I need help
Thanks in advance

[Completed] [Q] [Help]Walton Primo S2

So here's what I did:
My phone got kinda full of things so I wanted to reset it so I did it from the settings on the phone
it succeded but google play wasn't working so I had to mount R/W and blablablabla don't even know how I managed to do it but here's what happened:
My phone got stuck when powering up at ALLVIEW logo and when I try to wipe data/factory reset from CWM it succeds but when I press reboot system now it says I don't have root and the Yes option is replaced with Install Root. At this point whatever I press , either No , Go back or Install Root , it restarts and goes up to the logo.
Tried :
Almost everything , like I downloaded this Rooted Deodexed Primo S2 firmware and put it on my SD card but in the CWM recovery it won't detect it as it seems.
Any ideeas ? I really am in a dillema and I hope I didn't brick my phone. Please help me xda !
oh btw , the phone gets charged , if it matters.

bump- Sorry for fast bump but I dont want this to get lost and I really need help :/

bump..

bump...

Hi,
Thanks for using XDA Assist Please post here [FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers so that experts using your device may help you more accurately
Good luck!

[Completed] Huge mistake! Please help guys :(

Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English

Warlock-idlaasri said:
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try to head over here
Good luck!

[Completed] Help saving my Sonim XP7

Hey guys, I've been attempting to root my Sonim XP7 and everything seemed to be going well until I rebooted a couple days ago, now it is stuck at the sonim boot logo. I've tried wiping and factory resetting it from recovery and it gives a successful data wipe message but continues to get stuck at the boot scree. I have no idea what to do. I imagine I already lost all data on the phone but i'd really like to get this phone working again. Can anyone guide me? Thank you

Hi !
Unfortunately I couldn`t find anything helpfull for you here on XDA , next time you must search deeper before proceeding to modify your device , confirmed tools must be considered
Now , the only thing I can suggest is to either contact the seller or the manufacturer in order to get it back on track .
Good luck !