I own a ZTE Blade G 4.1.2 Android device , i recently installed a stock Belgium ROM from the ZTE official site .
I installed it straight from the phone it didnt require CWM , so I installed it straight from settings -> developer settings -> install update from SD Card . The installation went smoothly , i was very satisfied. I then rooted it. And then because i'm very smart of course , i decided that my speakers need a 'boost' so i downloaded an app called Beats Audio Installer . The app installed and then asked for a reboot. It rebooted and it's stuck on the ZTE Logo . From what i've heard i need to have a custom recovery so that i could do anything , which i don't . I can go in to the stock recovery fine , i tried installing the rom again from the stock one but it just says install /sdcard and then shuts off . Im guessing it's some sort of a verification process which this Rom isn't passing . Please Help , i'm a total noob at this.
Hi, thank you for using XDA Assist. You might have to start by bringing your device back to stock. See this, http://forum.xda-developers.com/showthread.php?t=2163493 And if you have further question you can hopefully find then here, http://forum.xda-developers.com/zte-blade
I resolved my issue by downloading the stock firmware that came with the phone from the ZTE website , installed it in the stock recovery , then after installed back to the belgium and installed the clockwork mod . Thank you for your response , even though my device is Zte Blade G , not Zte Blade , but still
I'm glad you got it fixed.
Thread closed.
Related
I own a ZTE Blade G 4.1.2 Android device , i recently installed a stock Belgium ROM from the ZTE official site .
I installed it straight from the phone it didnt require CWM , so I installed it straight from settings -> developer settings -> install update from SD Card . The installation went smoothly , i was very satisfied. I then rooted it. And then because i'm very smart of course , i decided that my speakers need a 'boost' so i downloaded an app called Beats Audio Installer . The app installed and then asked for a reboot. It rebooted and it's stuck on the ZTE Logo . From what i've heard i need to have a custom recovery so that i could do anything , which i don't . I can go in to the stock recovery fine , i tried installing the rom again from the stock one but it just says install /sdcard and then shuts off . Im guessing it's some sort of a verification process which this Rom isn't passing . Please Help , i'm a total noob at this.
hey guys! I really need help. Actually i have a LG L70 D325 phone and i rooted it few days ago. After that, i installed CMW recovery and i also instaled ROM Manager. I used ROM Manager to install CyanogenMod 12.1 and after that, i installed GApps. As I didnt like the CyanogenMod 12.1 apps, i installed "Cleanser Mod 2.0" . I ran this with ROM Manager and i removed all app in cyanogenMod 12.1. (well, there was a list and i just selected everything. After that, i reboot it and it got stuck on" Android is starting.. starting apps".. its not starting. I want to boot on CWM recovery again but its not working ! I read about volume keys and power button (I tried everything !!), but its not going on CWM recovery !!!. It just boot the "LG logo" again and again till i let go and it continues showing the cyanogen logo and eventually gets stuck on "Android is starting.. ".. i tried connecting it to pc by USB but my pc is not recognising cause the phone is switched off i guess !
Please help me ! I really need my mobile phone !!!
Hi there,
Please make sure you can access Download Mode by turning off your phone, then hold Volume Up and plugging in your USB cable.
After that please read carefully this tutorial and see if you can flash stock firmware thru that tool.
[TUTORIAL] How to flash LG phones with LG Flash Tool 2014
Good luck
Additional info: [Q] How to recover LG l70 D320N?
So here's what I did:
My phone got kinda full of things so I wanted to reset it so I did it from the settings on the phone
it succeded but google play wasn't working so I had to mount R/W and blablablabla don't even know how I managed to do it but here's what happened:
My phone got stuck when powering up at ALLVIEW logo and when I try to wipe data/factory reset from CWM it succeds but when I press reboot system now it says I don't have root and the Yes option is replaced with Install Root. At this point whatever I press , either No , Go back or Install Root , it restarts and goes up to the logo.
Tried :
Almost everything , like I downloaded this Rooted Deodexed Primo S2 firmware and put it on my SD card but in the CWM recovery it won't detect it as it seems.
Any ideeas ? I really am in a dillema and I hope I didn't brick my phone. Please help me xda !
oh btw , the phone gets charged , if it matters.
bump- Sorry for fast bump but I dont want this to get lost and I really need help :/
bump..
bump...
Hi,
Thanks for using XDA Assist Please post here [FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers so that experts using your device may help you more accurately
Good luck!
Hi ,
I have been reading a lot on xda developers about how to root,back up and flash a custom rom. I Successfully rooted my phone and got the supersu app too . I downloaded a few apps like greenify and fullscreen to test the waters of rooting . I also downloaded rom manager , TWRP & helium . Everything was going smooth when i was trying to make a back up from rom manager it wasnt letting me and phone would just reboot when i tried .
Then i was getting a little restless and tried to work on TWRP to install a recovery and an option that was on top of install a recovery . It gave me few options to which i said yes ( something related to back up in sd card ) . Then it asked me to press yes to reboot and since then my phone gets stuck at the samsung logo screen and if i press volume down + power + home then it gives me a screen where it says " downloading... do not turn off target !!" . On this screen the current binary is custom and so is the system status .
No other key combination that i know of is working .
PLEASE HELP .
Thanks in advance
Manik
XDA Visitor said:
Hi ,
I have been reading a lot on xda developers about how to root,back up and flash a custom rom. I Successfully rooted my phone and got the supersu app too . I downloaded a few apps like greenify and fullscreen to test the waters of rooting . I also downloaded rom manager , TWRP & helium . Everything was going smooth when i was trying to make a back up from rom manager it wasnt letting me and phone would just reboot when i tried .
Then i was getting a little restless and tried to work on TWRP to install a recovery and an option that was on top of install a recovery . It gave me few options to which i said yes ( something related to back up in sd card ) . Then it asked me to press yes to reboot and since then my phone gets stuck at the samsung logo screen and if i press volume down + power + home then it gives me a screen where it says " downloading... do not turn off target !!" . On this screen the current binary is custom and so is the system status .
No other key combination that i know of is working .
PLEASE HELP .
Thanks in advance
Manik
Click to expand...
Click to collapse
Hello, thank you for using XDA assist!
First, please create an account so you can post in other forums.
Here is the main forum area for your device:
(You should bookmark this)
http://forum.xda-developers.com/note-3-neo
After creating your account, please ask your question here:
http://forum.xda-developers.com/note-3-neo/help
The experts for your device are located there and will be able to help.
Good luck!
User has created an account and has asked for help in the link provided.
Thread closed.
Flashback:
I rooted my Alcatel One Touch Pop C5 (5036D) using framaroot and it works fine and i encountered bootloop due to changing fonts. I fixed my phone by using hard reset (i have no CWM and TWRP installed) and there was an option of wipe dalvik cache so it fixed my phone by formatting my phone. Three months later when i woke up in the morning my phone is turned off idk why, so when i turned it on, it is in bootloop again ;-; . So i have to reset it again (i have no CWM and TWRP installed) but there was no dalvik cache option nor advance option so my phone is not fixed. The next day at school i asked my friend how to fix bootloop, he said i must flash my phone using odin. I searched my phone's stock rom and found none. I only found custom rom and it is a "GE kitkat alcatel pop c5 rom".
FYI
I don't know we have to install CWM recovery after rooting phone
Present:
So can you guys assist me how to flash Alcatel Pop C5 (5036D) using odin? and I have no odin software so can you guys tell me how to get odin?
P.S if you guys have Alcatel One Touch Pop C5 (5036D) stock rom can you guys upload it to me or share the website of the phone stock rom?
XDA Visitor said:
Flashback:
I rooted my Alcatel One Touch Pop C5 (5036D) using framaroot and it works fine and i encountered bootloop due to changing fonts. I fixed my phone by using hard reset (i have no CWM and TWRP installed) and there was an option of wipe dalvik cache so it fixed my phone by formatting my phone. Three months later when i woke up in the morning my phone is turned off idk why, so when i turned it on, it is in bootloop again ;-; . So i have to reset it again (i have no CWM and TWRP installed) but there was no dalvik cache option nor advance option so my phone is not fixed. The next day at school i asked my friend how to fix bootloop, he said i must flash my phone using odin. I searched my phone's stock rom and found none. I only found custom rom and it is a "GE kitkat alcatel pop c5 rom".
FYI
I don't know we have to install CWM recovery after rooting phone
Present:
So can you guys assist me how to flash Alcatel Pop C5 (5036D) using odin? and I have no odin software so can you guys tell me how to get odin?
P.S if you guys have Alcatel One Touch Pop C5 (5036D) stock rom can you guys upload it to me or share the website of the phone stock rom?
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Your friend must be a Samsung fan. Unless I missed something, Odin is only an option for Samsung devices.
At any rate, this thread should be all you need in terms of stock:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] Alcatel One Touch Pop C5 soft brick
Hope this helps, and good luck!