Hello people nood here!
I have a stock Rom S5670JPKC1 (arabic) Froyo 2.2.1, I think there isn't any gingerbread update for my stock rom. Reading some post and comments about flashing a different firmware version or region will result to some issues like GPRS, WIFI and USB settings.
My questions is:
1) If I flash a different Stock Rom (gingerbread) and have some settings problems, can i flash back to my orginal Froyo firmware (stock rom) version? (from latest version to old version).
Thank you very much!
Yes, u can very easily revert back to your stock rom without any issues.
Follow the following procedure:
1.install clock world mod recovery (not from market or else ull brick your phone!,, instead use the post given in development section: http://forum.xda-developers.com/showthread.php?t=1277759)
2.before flashing the rom just do a backup in recovery mod. It will backup all your system files and apps on your sd card.
3. Now feel free to flash any rom.whenever u encounter any problem with current rom, just restore your phone in recovery mod.
Thats it!
yes you can flash back the orignal firmware..samfirmware has a 2.2.1 arabic firmware..
i am from india and am running an European firmware..no problems yet
Thank you guys for your reply.
I was able to flash XXKPL Gingerbread 2.3.4 in my phone. WIFI is working fine.
My problem now is the USB connection... no response from my PC and phone too. I want to root it using Super1Click and later found out that it won't work with gingerbread 2.3.4. I know i can use memory card adpter, but i want to make the usb connectivity work! I want to try it with Android Commander too.
Thanks again! I appreciate all your help!
Super1click wont work with our phone..You need to download the update.zip file and flash it in recovery to root
Sent from my GT-S5670 using Tapatalk
twistergear said:
Thank you guys for your reply.
I was able to flash XXKPL Gingerbread 2.3.4 in my phone. WIFI is working fine.
My problem now is the USB connection... no response from my PC and phone too. I want to root it using Super1Click and later found out that it won't work with gingerbread 2.3.4. I know i can use memory card adpter, but i want to make the usb connectivity work! I want to try it with Android Commander too.
Thanks again! I appreciate all your help!
Click to expand...
Click to collapse
Just reboot PC.. If that doesn't help then reinstall usb drivers for samsung !!
Hi Guys. I encounter a problem, a big one. I'm on DDLF2 CF Root+Deodex and my wifi won't connect to the internet. It works normally but it wont connect to the Internet. This problem starts when i flash Androman's S3 Style V.6, I follow the guide (no need flash prefix, using Jelly Bread before) and flash the data. After it boot, it wont connect to the internet :crying: . Clean install XXKPE then DDLF2 wont work at all, please help me, I'm a wifi user.
EDIT: Found the problem solver. Closed the thread kindly.
Which kernel do you use? I faced the same problem and fixed it flashing kernel CF root bam 14.fix. hope it help you.
Send from i9003 powered by JELLY BAM
Rich'Dawg' said:
Hi Guys. I encounter a problem, a big one. I'm on DDLF2 CF Root+Deodex and my wifi won't connect to the internet. It works normally but it wont connect to the Internet. This problem starts when i flash Androman's S3 Style V.6, I follow the guide (no need flash prefix, using Jelly Bread before) and flash the data. After it boot, it wont connect to the internet :crying: . Clean install XXKPE then DDLF2 wont work at all, please help me, I'm a wifi user.
EDIT: Found the problem solver. Closed the thread kindly.
Click to expand...
Click to collapse
i also have thae same problem but i have solved it. i just reflashed ddlf2 rom buy odin and my wifi is working perfect now
idk , if this could help , i have my phone GT-S7562 bootloop because i flashed Bravia Engine Uni MOD ,
and now i dont have any backup , just only my CWM , i know flashing New Firmware could help me out
but the problem is our Internet Connection are suffering from low download speed which causes me to download 500mb for Days! , and sometimes it fail's , now im looking for an easier way to have my phone revived back. so i was thinking if flashing System.IMG using Odin could help? if so , please upload the file for me , or give me some other suggestion.
(does flashable Build.prop works too?)
Thanks in advance
Hello! People please help. I'm not working WI FI and Bluetooth. He rarely worked after a successful restart on cyclic sink firmware 4.2.2. I'm sick of this, I decided to reboot and flash it on a stable firmware version 2.17. But why is the drain is not working 2.17 NFC WI fi Bluetooth. Then again I pierced it at 1.12, 1.14, 1.17. But there again repeated cyclic restart, but it is not working WI FI Bluetooth, NFC for work. I can not understand the smartphone fully working, why stop vayfay and bluetooth does not work? Read all forums and many of the same problem with not working Wifi and Bluetooth. Prompt, whether there is a solution?:смущенный: Smart SONY XPERIA L
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
got any solution?????
RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)
n78 shadow said:
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)
Click to expand...
Click to collapse
Model- C2104
At first everything was working fine in original firmware ,
Even after flashing cm12.1 everything was fine,
once updated to cm13 later there is a problem of wifi and bluetooth sometimes it works fine and at some point mobile will reboot by itself later on both wifi and bluetooth doesn't work (They cant be turned on)
I re flashed original firmware,
re flashed cm12.1,Even tried many roms (Thunderzap,Resurrection_Remix,Temasek) but still problem remains same.
sidbi said:
Model- C2104
At first everything was working fine in original firmware .
Click to expand...
Click to collapse
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal
n78 shadow said:
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal
Click to expand...
Click to collapse
Can you please provide link of all three please. (which kernels should i flash)
sidbi said:
Can you please provide link of all three please. (which kernels should i flash)
Click to expand...
Click to collapse
For boot.IMG click on this word with yellow color.
For the ftf
Http://www.mediafire.com/?yiak3ktb3m58iwd
Thanks to @Joel16 for the link
I mean by kernal the kernal in the ftf exclude everything while flashing in flashtool except the kernal and the fota kernal
I'm having the same issue. But it started out of nowhere, so I'm guessing its a hardware problem.
After it happened, I flashed almost every kind of ROM and Kernel around here. Nothing worked.
Also I flashed the official Sony's firmware for my country and it still not working.
Tried the PC Companion's repair function, didn't work too.
When I try to turn WIFI on, I get a "fail to load wifi driver" message at logcat.
I'm not new into flashing ROMs, so I'm almost sure it is not a system issue despite the error message I get.
Sprint GS6 Edge - Unlocked by Sprint - Android 6.0.1
I updated to Marshmallow earlier today and everything is great except for the fact that I am not getting signal on my phone. It keeps saying Searching for Service on the top left of the screen and the signal bars stay at 0.
I tried changing Network Mode but I get an "Emergency Calls only" if i switch to GSM/ UMTS and if I try to look for my network provider manually I get no results. With both LTE/ CDMA and CDMA it just keeps looking for Service.
I am not in the States but have been using this phone for the past year or so with no problems until I updated this morning (downloaded .tar file and flashed it with Odin).
I was rooted and had a custom rom before I updated but I made sure to clean the phone and do all the steps correctly to update. Also, the phone gets signal even without rooting/ custom rom in 5.0.2 (again, Sprint unlocked the phone when I first got it).
Any ideas on what to do/ how to fix this? If it is a problem with the update, is there a way for me to go back to 5.0.2?
Thanks for the help!
Same problem OTA update.
Did u find any solution to your problem I am also outside US, I got an OTA update of Marshmallow for GS6(unlocked by sprint), and it can't find the network anymore, I've been using the phone with the same regional carrier for months and now after the update can't find the network.
Same issue here... I have tried everything... and nada!
Also out of the country with a rooted and unlocked Sprint Samsung Galaxy S6 Edge SM-925P - I tried and searched everywhere, even went to a "GSM Phone Genius Store" and they could not do anything for me. I do get on my network (Orange), on automatic or LTE data works fine but I can't either receive nor make calls. At first I thought it had something to do with the Hands Free Activation pop up but after I could not find any solution I went back to 5.1.1 the Hands Free Activation popped again and of course would not register just like on 6.0.1 but... I had all my network connections working fine. I was able to make calls, receive them and LTE data as well. So that was not the issue. I then (rooted) took off the Hands Free Activation pop up by renaming the SprintDM.apk file to .bak just in case you guys want to remove the annoying notification... In all the searching I found that this was a glitch on Sprint's version of the Marshmallow update, since this is the only 6.0.1 for my SM-925P I could not use another country's 6.0.1 I tried jejeje, believe me I tried... So, it appears that we will have to wait until Sprint finds it in them to fix this but I am very hopeful the REAL Geniuses of XDA could come up with a patch for this issue. The guys at the store I went said that the cell's operating system was not getting the GSM network and that is why I could not make or receive any calls and the LTE was working fine. Hope this helps some and even more hopeful that any of the boyz/girlz of XDA take pitty on us and come up with a fix for this thanks in advance...
Mario Bello Samsung Galaxy S6 Edge SM-925P
Is it because you're out of the States has something to do with it?
A few of us did the same thing but didn't encounter any of the issues you're mentioning?!
So far everything is working smoothly. I just can't wait for a nice MM based ROM to come out for Sprint variants..
I guess but I went back to 5.1.1 and everything works fine... So, I do think so... Oh well, me too waiting on a MM Rom to see if something changes... But meanwhile still NOT able to make or receive calls ...
Possible Fix
I had this problem with a Sprint S6 Flat too, what I did to fix it was to download an older firmware where the S6 was gettin signal then extract the modem.bin from it and flashed it in odin, restart the phone and got signal
How did you extract de file to get the modem?
How did you extract to get the modem?
Extracted and flashed... still issues...
GTOFerrari said:
I had this problem with a Sprint S6 Flat too, what I did to fix it was to download an older firmware where the S6 was gettin signal then extract the modem.bin from it and flashed it in odin, restart the phone and got signal
Click to expand...
Click to collapse
Wow really thought this was gonna work, many thanks... I did as you said and was very hopeful... once I flashed the modem the phone did come up with a signal and I could make calls but now the phone does not switch from GSM to LTE back and forth. If I have it on (Automatic) LTE/Data works fine, as soon as I try to make a call it goes to 3g then just signal up but it does not make the call and then it wont bring back LTE, stays on 3g... I'm dying here with this! If I put it on GSM / UMTS I am able to make calls but no Data...
I did do it with the 6.0.1 as it was, I gonna try this, do a factory reset, flash a clean version of the 6.0.1 and then flash the modem to see what happens.
Again, many thanks GTOFerrari, by far the best option TO FIX this I have see to date.
Mario Bello
---------- Post added at 04:20 PM ---------- Previous post was at 04:09 PM ----------
Nanakwameampong said:
How did you extract to get the modem?
Click to expand...
Click to collapse
Yeah, I was curious as to how to do that as well, spent sometime in google but I found the way, and it is actually very simple. You download the firmware from which you would like to extract the modem. Then with WinRAP or any software like that you find the firmware and click extract on a folder cause about 5 files extract from it or so and you will see the modem.bin file there. Now, the issue was how to flash the bin file through Odin, it does not say "Phone" anymore like previous versions of Odin, so more google time spent and what I ended up doing was converting the .bin file to TAR and then flashed it through Odin clicking on AP like always. I found a software called PeaZip that converts the .bin file into TAR... There's probably a way to flash it through Odin as a .bin file clicking on one of the other options BL, CP (probably this one CP) or CSC but I don't know which represents "Phone" for sure so I converted the file as instructed on another XDA thread and that's how I did it.
Hope this helps, and again, the props on the solution goes to GTOFerrari...!
Mario Bello
mariobello said:
Wow really thought this was gonna work, many thanks... I did as you said and was very hopeful... once I flashed the modem the phone did come up with a signal and I could make calls but now the phone does not switch from GSM to LTE back and forth. If I have it on (Automatic) LTE/Data works fine, as soon as I try to make a call it goes to 3g then just signal up but it does not make the call and then it wont bring back LTE, stays on 3g... I'm dying here with this! If I put it on GSM / UMTS I am able to make calls but no Data...
I did do it with the 6.0.1 as it was, I gonna try this, do a factory reset, flash a clean version of the 6.0.1 and then flash the modem to see what happens.
Again, many thanks GTOFerrari, by far the best option TO FIX this I have see to date.
Mario Bello
---------- Post added at 04:20 PM ---------- Previous post was at 04:09 PM ----------
Yeah, I was curious as to how to do that as well, spent sometime in google but I found the way, and it is actually very simple. You download the firmware from which you would like to extract the modem. Then with WinRAP or any software like that you find the firmware and click extract on a folder cause about 5 files extract from it or so and you will see the modem.bin file there. Now, the issue was how to flash the bin file through Odin, it does not say "Phone" anymore like previous versions of Odin, so more google time spent and what I ended up doing was converting the .bin file to TAR and then flashed it through Odin clicking on AP like always. I found a software called PeaZip that converts the .bin file into TAR... There's probably a way to flash it through Odin as a .bin file clicking on one of the other options BL, CP (probably this one CP) or CSC but I don't know which represents "Phone" for sure so I converted the file as instructed on another XDA thread and that's how I did it.
Hope this helps, and again, the props on the solution goes to GTOFerrari...!
Mario Bello
Click to expand...
Click to collapse
In many forums that I've read, mentions that most sprint mobile works only on 3G outside the US
I'm from México and that's how we use it, sometimes get LTE, sometimes not
And the modem.bin is flashed in CP in the latest Odin
conversion of bin to tar?
can you please help with how to do the conversion of the bin file to a tar file using peazip?
Nanakwameampong said:
can you please help with how to do the conversion of the bin file to a tar file using peazip?
Click to expand...
Click to collapse
No need to convert .bin to .tar
Just flash modem.bin in latest Odin in CP
Forgot I had posted this here, too.
Tried what GTOFerrari said and it is working now.
Thanks for the help!
GTOFerrari said:
No need to convert .bin to .tar
Just flash modem.bin in latest Odin in CP
Click to expand...
Click to collapse
Yes, it is working now, many thanks GTOFerrari...!
Mario Bello
Like GTOFerrari said, just click on CP in Odin and put the modem.bin file there... Works fine like that. No need to convert to tar like I did before...
Mario Bello
Same issues
I have the same problem here. Where's the modem.bin located on
I have the new marshmallow in my note 4 sm-n910p used to have Lte network before fine but know I don't have signal. I did flashed the modem. Bin from the version 5.1.1 that used to work but still have the same issue. Any ideas?
Maybe simple but...
T8by said:
I have the new marshmallow in my note 4 sm-n910p used to have Lte network before fine but know I don't have signal. I did flashed the modem. Bin from the version 5.1.1 that used to work but still have the same issue. Any ideas?
Click to expand...
Click to collapse
You know, I did that and did not work but I took the SIM out and rebooted and it has worked ever since... you probably have already done this but still no harm in mention it, give it a try if you haven't yet, hope it works.
Best, Mario Bello :good:
Thank you for the reply. I tried that without success.. Still no signal. The modem version that I have now is N910PVPU4COG5. Which one are you using Mario, if it is not too much to ask?
Modem version...
T8by said:
Thank you for the reply. I tried that without success.. Still no signal. The modem version that I have now is N910PVPU4COG5. Which one are you using Mario, if it is not too much to ask?
Click to expand...
Click to collapse
I am on a Sprint Galaxy Edge SM-925P though, I see you are on a Note 4 - probably shouldn't matter but still worth mentioning... My modem version is on the 5.1.1 that worked fine: G925PSPT3BOL1
Hopefully one these great guys can help you better, there are real geniuses here :good:
Best, Mario Bello
Thank you Mario. I noticed that my network options used to included in the version 5.1.1 CDMA/EvDo/GSM/ O WCDMA , and my used to work fine in H+ in network mode gsm/wcdma. Now I only get the network options Cdma/Lte .. Gsm/Umts. I will keep trying and let you know if I get it to work.