Database Info

Unbrick honor 6

Hi guys,
I bricked my honor 6 and I don't know how fix it.
I was using developer ROM 6.2.1 not modded and not rooted
I decided to install stock rom B535 and I proceed as follow:
1 - I copyed stock rom in dload folder on my microsd card
2 - flash by fastboot stock recovery.img
3 - flash by fastboot system.img
after that i reboot the phone but it stay on Honor logo.
I tryed with 3 buttons method but the istallation start until 90% and then stop on 90%...
I tryed tho flash by fastboot also CUST, BOOT, USERDATA and CACHE (extracted by stock B535 ROM) but after 3 btn method the instalation stop again at 90%...
I don't know what I can do...
Any suggestion?
THANKS

My bootloader is unlocked

Is there any solution? I got the same problem.

The trouble I meet is similar to yours. I guess I will stay in EMUI3.1 forever
Sent from my XT1079 using XDA Free mobile app

I solved my problem, see my post: http://forum.xda-developers.com/hon...02-impossible-to-charge-t3329176#post65673722

Huawei ascend G6-L11 get in bootloop

Hi guys
Yesterday i tryed to upgrade my Huawei Ascend G6-L11 on KitKat 4.4 but i failed and now my phone is in bootloop and i can't do anything. I tryed with factory reset but again my mobilephone is in bootloop. I tryed to install android 4.2 from huawei site and tryed to install him with: apply update from external storage but when i do it i get message: update package's ext name error. Installation aborted.
Then I tryed to fix my phone with ADB, i download fastboot but i can't find CM11 for my device...
If someone know how to fix it please tell me and im really sorry bcs my bad english but im desperate

trulynho said:
Hi guys
Yesterday i tryed to upgrade my Huawei Ascend G6-L11 on KitKat 4.4 but i failed and now my phone is in bootloop and i can't do anything. I tryed with factory reset but again my mobilephone is in bootloop. I tryed to install android 4.2 from huawei site and tryed to install him with: apply update from external storage but when i do it i get message: update package's ext name error. Installation aborted.
Then I tryed to fix my phone with ADB, i download fastboot but i can't find CM11 for my device...
If someone know how to fix it please tell me and im really sorry bcs my bad english but im desperate
Click to expand...
Click to collapse
Try flashing a rom like slimstock, or anything that is a flashable .zip for your phone. Maybe an G6-u10 rom will boot fine (maybe it needs your original L11 boot.img).
It will fix your bootloop, dont worry about that.
If you have a unlocked bootloader and a phone that turn on (If it can boot to the bootloader/recovery), you can fix it easilly.

Mate 7 Gold Stuck at rescue mode after flashing a wrong update

Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently

Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy

Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk

Can't flash SuperSu by twrp

Device : FRD-AL00
EMUI ver 5.0 / Nougat
I'm using [TWRP][H8][3.1.0-2][EMUI 5.x / AOSP N][DECRYPTION SUPPORT] now and can't flash SuperSu. Also can't flash other ROMs.
If i flash SuperSu my phone goes restart during install and if I flash the ROMs, it said error code7
Well.. I think the problem is because of using wrong TWRP but can't find appropriate TWRP
-> I tried 7 different twrp but didn't work... maybe this is not the problem
I've tried to solve this my self but stuck at here for 2days....
Help me please.....

Solved! I just flash wrong supersu file.... But something worse comming. I think i'm in bootloop and can't use recovery. Whenever I turn the power with holding volume up key it goes to huawei e-recovery eventhough I install twrp! To make matters worse I try to debrand Al00 to AL09 so can't use e-recovery also..... Please kindly help me... This is my main only phone....

Bricked BLL-L22 need help

so the problem is i installed the beta EMUI 5.0 nougat and by tutorial and installed twrp and rooted my phone. but i got new update but cannot update so i tried with flashfire to flash new firmwire with it. but in that process i did something wrong it says
Error mode
Attention
please update system again
error
func no:11 recovery image
error no :2 load faild
now i need to flash the stock recovery
i know how to connect to bootloader mode by pressing vol - and power button while turning on and connect the pc usb cable
now i need recovery.img but i tried it do not flash the firmwire it says system failure.
i need stock recovery.img and which update.app version so that i can make the phone work again