I have rooted my phone using supersu by cwm
and after that the phone rooted and was working perfectly and yeterday i got an update from asus and a started dwonloading it but it not installed so i downloaded firmware from asus site and it not installed also so i started working using cwm and try to install using install update from zip and it not works also after that the phone didnt works the main problem that i just executed this command fastboot flash recovery 4.3.6_ww_recovery.img and 450cg doent have recovery mode and later i know that i have to disable/uninstall super su and thier require 1 gb space now i need to boot into cmw i think the recovery makes the problem after running fastboot flash update updateCWM_6.0.2.8_fix_wipe.zip this the phone restars and shows asus logo and nothing happens what will i do now?
extremezone said:
I have rooted my phone using supersu by cwm
and after that the phone rooted and was working perfectly and yeterday i got an update from asus and a started dwonloading it but it not installed so i downloaded firmware from asus site and it not installed also so i started working using cwm and try to install using install update from zip and it not works also after that the phone didnt works the main problem that i just executed this command fastboot flash recovery 4.3.6_ww_recovery.img and 450cg doent have recovery mode and later i know that i have to disable/uninstall super su and thier require 1 gb space now i need to boot into cmw i think the recovery makes the problem after running fastboot flash update updateCWM_6.0.2.8_fix_wipe.zip this the phone restars and shows asus logo and nothing happens what will i do now?
Click to expand...
Click to collapse
update after ruuing this command it not even loads droidboot
fastboot flash recovery droidboot.img
the img file is from the new firmware i have downloaded
Hi,
Thanks for writing to us at XDA Assist.
I didn't find anything that could help you out.
Try asking in the forum below where experts of your device may be able to give better assistance:
Zenfone 4 Q&A, Help & Troubleshooting
Good luck.
Related
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Double tread
Inviato dal mio LG-P500 con Tapatalk 2
??.. can u reply in english please.
problem solved.
CLOSE THREAD
help
clawsright said:
Hi.. I installed Rom Manager onto my friends p500,it was rooted earlier.. but it did not have a custom recovery ..so i flashed the latest cmw through the rom manager app.
After which i selected to create a back up.. The mobile restarted (to enter the cmw recovery for backup operation).. but soon after the restart the mobile got stuck at the LG Logo.. I waited for about 10mins and it did not respond. Then i removed the battery and then power it on.. but it is stuck at the LG logo.. I am unable to get into custom recovery.. (power+home+volumeup).
Also, Mobile is not detected when connected to pc.
How to resolve this issue?? Please help
(I am able to get into emergency mode)
Click to expand...
Click to collapse
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Vipuljain_in said:
I faced similar issue, and got it resolved by jtag.
now I am afraid to do custom recovery, can u tell me what went wrong and how to avoid.
I am on stock 2.3.3
thanks in advance.
Click to expand...
Click to collapse
Even though the the P500 is "supported" by ROM Manager, ROM manager is extremely wonky with that device. ROM Manager is not the only way to install a recovery and IMHO is the worst way to manage that device. ADB, Fastboot, and FlashImageGUI are much safer alternatives. FlashImageGUI requires the 'flash_image' binary to be installed on the device. I've never seen it on a stock ROM for any device but it is usually included with custom ROMs. 'flash_image' can be extracted from /system/bin of any custom ROM and pushed to the device. FlashImageGUI can be downloaded from Play Store. The other two alternatives are a little more cumbersome, but just as effective.
I have written a Windows front-end for the fastboot executable called Android Flash Recovery. Assuming that your device drivers are correctly installed and the device can be booted in to fastboot mode, Android Flash Recovery can make recovery installation much easier. The link for AFR is in my signature.
clawsright said:
problem solved.
CLOSE THREAD
Click to expand...
Click to collapse
Thread closed
Dear
I have rooted my phone using fastboot method using my PC...and flashed recovery twrp tomato 2.8.6.0 ....
But when every I go to bootloader it takes me to the cynoagen recovery...
Update cyanogen recovery is off
Checked whether my phone is rooted or not ....
But everything is fine except the bootloader loads the cyanogen recovery in place of twrp
vbharadwaj said:
Dear
I have rooted my phone using fastboot method using my PC...and flashed recovery twrp tomato 2.8.6.0 ....
But when every I go to bootloader it takes me to the cynoagen recovery...
Update cyanogen recovery is off
Checked whether my phone is rooted or not ....
But everything is fine except the bootloader loads the cyanogen recovery in place of twrp
Click to expand...
Click to collapse
Hello,
You may try flashing it again(maybe twice or thrice untill you get to TWRP) since YU devices are known to have this issue.
-Vatsal
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
I had a custom 5.1.1 carbon rom with a twrp recovery and well I wanted 6.0 + nethunter I have been trying to install cyogen or acip rom with no luck just hangs on NVidia log , I stupidly flashed recovery img fro cryogen and no cant boot in to recovery no more , if I open fast boot I get my tablet listed in fastboot devices and nothink in adb devices if I try to flash recovery back to twrp using
fastboot flash recovery twrp.zip it just does nothink no errors just sits there I don't know what to try so asking for some help , I'm using my laptop and work pc with no difference
hope some one can help thanks
craig
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Craigst1 said:
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Click to expand...
Click to collapse
Flash stock, reboot, than twrp+custom rom.
https://developer.nvidia.com/shield-open-source
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
georgemshaty said:
Good Evening,
I own a Samsung Grand Neo Plus (GT-I9060i) and I was running a dotOS v1.2, rooted and bootloader unlocked. I recently downloaded an app called Rashr from Play Store to flash a TWRP recovery because i couldn't flash the stock rom in my CWM recovery, after flashing the TWRP img file the phone rebooted and nothing more happened, I tried to go into recovery mode but nothing happen, even doesn't boot into the System, and when i try to flash the stocke frimware and the TWRP recovery with odin the windows says that the USB not recenized even i am allready have all drivers installed and updated and in bootloader mode .. i have another I9060i it works with no problems with Odin and Windows
Now I don't have recovery to flash a Rom and the Windows USB Problem and no System
I just want to fix the USB Problem or just a idea to install any recovery to flash any Rom to get the phone to life again
If anyone can help me i will be very happy,
Thank You
Click to expand...
Click to collapse
Samsung has download mode, not bootloader mode(kinda the same but not exactly because download mode is not fastboot compatible but devices with bootloader mode are fastboot compatible).
As for the issues you're having, try this thread for troubleshooting a failed Odin flash.
https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Sent from my LGL84VL using Tapatalk