Database Info

Ascend G6- Need Original boot.img For G6-U10

need original boot.img for g6-u10
hey
i was working on boot.img for add TWRP 2.7 Recovery
after i flashed boot.img from here
How to Install TWRP 2.7 Recovery:
TWRP 2.7 works only with the Android 4.4.2 KitKat powered Huawei Ascend P6.
You must have installed Android ADB & Fastboot drivers on your PC. Get the Fastboot folder using the guide.
Once done with the ADB and Fastboot installation, download TWRP 2.7 Recovery.img file.
Rename the downloaded file to boot.img.
Enable USB debugging mode on your Huawei Ascend P6 and connect it to your PC.
Now open the Fastboot folder that you created using our ADB & Fastboot guide.
Press and hold the shift key and then right click on an empty area inside the Fastboot folder, now click on “Open Command Window Here”.
Now in command prompt type “adb reboot bootloader”.
It should reboot your phone into the bootloader mode, now push this command in command window
“fastboot flash boot boot.img”
This will quickly flash the TWRP 2.7 recovery in your device.
Once done, reboot your device.
Boot into recovery by pressing Volume Up or Down Key as soon as you see the Red LED while booting up your phone.
You should see the TWRP recovery interface now.
That’s all with the recovery installation on the Huawei Ascend P6. In case you got any queries or your facing any problems regarding this post, feel free to stop by the comment box below and reach us. Thanks all.
Click to expand...
Click to collapse
phone wont start only fastboot mode
please help me guys to reinstall system again

finally i install cwm on my phone from other topic here
but now only 2 screen 1 the cwm and 2 screen for fastboot mode
now i need to reinstall system like it come from huawei then i try again to install cwm again or it just install once
sorry guys this frist time to edit huawei phones and i try before with samsung and it so easy with it not like huawei phone
im now download G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip
from huawei site to try install it
so guys this way to install G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip from cwm is corruct or need download another file to reinstall system?
hope guys help me fast becuze this frist time with huawei phones

any help guys

any help to rest my phone?

you can't install original firmware from cwm, you have to proceed with the included instruction (in zip)

can u give me the firmware to download and flash it
need help guys

Huawei g6 u10
Mount cache fail
Mount data fail
Help us solve this issue please....
---------- Post added at 07:27 PM ---------- Previous post was at 07:04 PM ----------
Need zip files or scatterfile to flash via sp flashtool..
Is it possible to flash p6 rom on g6 via sp flashtool???
Please help us solve this issue.....

bricked my huawei Mate 8 NXT-L29 after flash plzz HELP

bricked my huawei Mate 8 NXT-L29 after flash plzz HELP :crying:

[email protected] said:
bricked my huawei Mate 8 NXT-L29 after flash plzz HELP :crying:
Click to expand...
Click to collapse
Follow instructions here: http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526 you should be up and running after.

First check if u can enter into recovery with the vol-up+power combo

additional info would also be nice as to what exactly u did...
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

Hi all, I have a problem with my mate8 ... after I installed TWRP next rom (NXT-L29C432B170) can not just write anything in fastboot. I fastboot unlocked but not take any order. I can not do root. I can not flash custom recovery. I can not flash another rom. I can not change themes. Help me please.

I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?

muqaddas_dunyatv said:
I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?
Click to expand...
Click to collapse
Try the followings:
1) download the update.zip from: http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
2) Extract UPDATE.APP
3) Create a folder dload on a SD card and put it in the phone
4) Push the power+volume up+volume down at the same time
If it works the phone will run the UPDATE.APP and you will be back with the stock rom.
---------- Post added at 02:39 PM ---------- Previous post was at 02:36 PM ----------
muqaddas_dunyatv said:
I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?
Click to expand...
Click to collapse
In step 3 you need to put the UPDATE.APP in the dload folder.

[email protected] said:
Try the followings:
1) download the update.zip from: http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
2) Extract UPDATE.APP
3) Create a folder dload on a SD card and put it in the phone
4) Push the power+volume up+volume down at the same time
If it works the phone will run the UPDATE.APP and you will be back with the stock rom.
---------- Post added at 02:39 PM ---------- Previous post was at 02:36 PM ----------
In step 3 you need to put the UPDATE.APP in the dload folder.
Click to expand...
Click to collapse
I have try but still cannot done . I think I'm wrongly flash other version.
What can i do???

Raymondpop said:
I have try but still cannot done . I think I'm wrongly flash other version.
What can i do???
Click to expand...
Click to collapse
Try to dload the update.app from the rollback package from this website:
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399
Try all three to see which one works for you. If the rollback update.app works then you can dload the update.app for the firmware you used before.

Cant boot Mate 8

I cant boot my mate 8 after i stupidly tried to debrand it flashing the images of firmware with fastboot. Now i can only boot in erecovery (but it doesnt download and recover the phone) and in fastboot mode, i really need your help guys. My phone model is NXT-L29C432 and firmware preflash B320
DLOAD METHOD WASNT WORKING BECAUSE OF A PROBLEM OF MY MICROSD, THREAD CAN BE CLOSED.

I finally got to twrp with an insecure boot.img, if someone can help me now, i dont know what to flash to make my phone work again

Download last ROM you were on and extract and put update.app in your Sd card root directory in dload folder (create one if you dont have). Insert SD card in phone, boot into software update mode and it will start updating automatically
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
First lock your bootloader again....

Installation failed at 39%

any ideas? no one? also twrp doesnt work anymore, dload installation still fails at 39% (i used the file before the brick and it was working) and i cant restore via erecovery or hisuite

Bricked my Mate 8 Please Help me

So I've got a Mate 8 from the Alibaba website. Got it yesterday, did OTA upgrade. Latest one was NXTL-L29C432B180. I wanted to upgrade to the new EMUI 5.0. I've successfully unlocked the bootloader. Tried all bunch of Update.zip files. Most wouldn't work. One actually worked but whenever it finished install (i used manual update through the *#*# keypad sequence) it went back into original 6.0MM as if no update was finished. Tried that few more times with same results. They i saw on the forum a way to update with flashing SU fFirst, followed by the some EU_HW file then followed by the UPDATE.ZIP. Well that messed up my phone, Tried everything to unbrck it..
I then turn over my phone and I see that the model number is actually NXT-DL00. So I am assuming the seller flashed the EU Firmware on the Chinese version of the phone. I've tried Rayglove Knife Unbrick method, but it hasn't helped.
I've found a Nougat 7 update_data_full_dualcu_cn.zip file and flashed using TRWP. Instead going into Huawei Erecovery (which hasn't work either) it just sits in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now".
I am getting pretty desperate guys. I've never had this much issue with my Note 3 and Note 4 phones. Can somebody please suggest what I can do next?

You want the EU or China Firmware?

letschky said:
You want the EU or China Firmware?
Click to expand...
Click to collapse
At the point ill take whatever works. Also, I've never seen this before but my Touch functions on TWRP, eRecovery or any other thing no longer works.

Have you flash only update_data_full_dualcu_cn.zip without the Update.zip?There are 2 Files to flash

letschky said:
Have you flash only update_data_full_dualcu_cn.zip without the Update.zip?There are 2 Files to flash
Click to expand...
Click to collapse
At this point because my touch function is not working I can't use TWRP. How can I flash this now?

another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here

srdjmor said:
At this point because my touch function is not working I can't use TWRP. How can I flash this now?
Click to expand...
Click to collapse
Use Logitech Wireless Touch Keyboard K400 or any keyboard with touchpad built in via mirco port.

And you need not Touch to reboot in Bootloader and flash the img files.
Can you Power off the Phone?
If not,
Press 10 sec Power to reboot,after vibrate Press Volume - and hold and put in your USB Cable when comes the Huawei Logo release the Vol-.
And you booting in Bootloader
If Bootloader locked,unlock again
Flash the img files via Fastboot.

letschky said:
another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here
Click to expand...
Click to collapse
I haven't done anything myself. As soon as I got the phone i did 3 or 4 OTA updates. Final version was NXT-L29C432B180, but on the back of the phone its a DL00. What gave me the bootloop was when i flashed
these 3 files and then restarted the phone from this thread
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/d...ull/update.zip
1.2- http://update.hicloud.com:8180/TDS/d...full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/..._v2.79_sr2.zip
So I am not really sure on what EMUI I am on.
I will try your procedure above. How do I factory reset the phone after I flashed the img files?

srdjmor said:
I haven't done anything myself. As soon as I got the phone i did 3 or 4 OTA updates. Final version was NXT-L29C432B180, but on the back of the phone its a DL00. What gave me the bootloop was when i flashed
these 3 files and then restarted the phone from this thread
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/d...ull/update.zip
1.2- http://update.hicloud.com:8180/TDS/d...full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/..._v2.79_sr2.zip
So I am not really sure on what EMUI I am on.
I will try your procedure above. How do I factory reset the phone after I flashed the img files?
Click to expand...
Click to collapse
I flashed all 4 image files from the 180 FW, restarted the phone with reboot command. Phone boots once, restarts, boots second time and goes straight into eRecovery

letschky said:
another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here
Click to expand...
Click to collapse
I have also just tried flashing recovery.img from the EMUI 5 located at this thread . No change in behaviour.
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
What about the update_full_hw_eu.zip file?

On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy

letschky said:
On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy
Click to expand...
Click to collapse
How do I perform a factory reset? All I have done was just flashed the IMG files and rebooted the phone using the fastboot reboot command

letschky said:
On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy
Click to expand...
Click to collapse
I am in Canada. When I received the phone with the B180 it worked fine before i tried to upgrade to 5.0

Press Power 10 sec the Phone reboot,Hold Vol+ and Power Button at same Time so long to ser the Huawei Logo,this boot in Menu to Factory Reset
---------- Post added at 07:31 PM ---------- Previous post was at 07:25 PM ----------
I think you must be on B192 to Update to B560
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
Is there no Ota for you from 180 to 192?

letschky said:
Press Power 10 sec the Phone reboot,Hold Vol+ and Power Button at same Time so long to ser the Huawei Logo,this boot in Menu to Factory Reset
---------- Post added at 07:31 PM ---------- Previous post was at 07:25 PM ----------
I think you must be on B192 to Update to B560
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
Is there no Ota for you from 180 to 192?
Click to expand...
Click to collapse
the very last OTA was L29c43b180. I remember i wrote it down on a piece of paper infront of me just so I know in case this happened. EMUI was 4.0. There were no available updates after that.
Ive tried holding the Power key + VolUp...it just takes me to eRecovery

Ok boot to erecovery and shot down.
Press and hold at same time Volume up and Power Button and release when you see the Huawei Logo.
You are on B180 Stock Recovery.img and not on B560 Recovery?
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
Better first Volume up and then Power Button

letschky said:
Ok boot to erecovery and shot down.
Press and hold at same time Volume up and Power Button and release when you see the Huawei Logo.
You are on B180 Stock Recovery.img and not on B560 Recovery?
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
Better first Volume up and then Power Button
Click to expand...
Click to collapse
Came into Factory Reset. Selected Whipe data/Factory Reset. After half a second, it flashed failed and goes back to the Factory Reset menu with an ! ( a red exclamation mark). I've tried few times. Yes, i've just reflashed boot, recovery, cust, and system from 180 that I extracted from update.app file.
I dont understand what is happening. I've worked on Note 3 and Note 4 with roots and bootloops and was always able to reflash it with a stock rom very easily. but this .....

Ok,next,copy the UPDATE.APP from B180 on Sd Card in Folder named:dload
Power off the Phone
Press and hold Vol up,Vol down and Power Button at same time so long to see flash Flash Procedur.

in c432b180 you can upgrade from hisuite way, is simple.
your problem is unbrick...
try srk tool, (flash boot, recovery, system and cust img files)
Enviado desde mi HUAWEI NXT-L29 mediante Tapatalk

help I have been installing roms for 10 hours and nothing works

hi i just got a honor 6x and i have been following guides and at one point i had lineage os 13 on the phone but it would only boot to the password screen
so then i side loaded resurrection os 5.7 and it didnt have wifi so i tried upgrading emui and now i can't install any rom it just hangs at "patching ssytem unconditonally"
i have TWRP running on the phone. i just want to go back to stock OS. please help how do i do this?

unknown command [errno] update_huawei_pkg_from_ota_zip from zip failed
when i try to flash the stock huawei rom

i can run fastboot and twrp but nothing else works. i will paypal 15 dollars to someone who can help me

You can download the full firmware directly from honor, unzip it, and place the update.app file in a dload folder that you create on your sd card. Power of the phone then hold volume up, down, and power at the same time to initiate an automatic flash of the room you downloaded. This will erase everything, so be aware.

1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating

Rommco05 said:
Which is your model number and which twrp u have installed?
Click to expand...
Click to collapse
l24 and twrp-3.1.1-0-berlin.img

siddhrsh said:
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Click to expand...
Click to collapse
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw

juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder then reboot your device using 3 button

Rommco05 said:
BLN-L24C567? If yes flash via twrp this two zips, after make reboot recovery in twrp. Should by now in stock recovery and here tap factory reset and after reboot. Now you will be hopefully in emui. Follow only if is correct your fw number which is mentioned here
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
Click to expand...
Click to collapse
by flash, you mean press the top left install button?

Rommco05 said:
Yes, download them and put to sdcard or inter memory. Flash first region and after update zip
Click to expand...
Click to collapse
The region flashes sucessfully but update.zup fails on '32k crc check'

Rommco05 said:
Any news juicyapply ?
Click to expand...
Click to collapse
update_huawei_pkg_from_ota_zip: update pcakage from zip failed
updater process ended with ERROR: ?
Errror installinc zip file '/sdcard/update.zip'

3.1.0-2 is the twrp version

it just says your device is booting now forever

i put it on stock recovery, i can put it back on twrp though

juicyapply said:
i put it on stock recovery, i can put it back on twrp though
Click to expand...
Click to collapse
No, just do a reset in stock recovery.

venugopalu007 said:
No, just do a reset in stock recovery.
Click to expand...
Click to collapse
it doesn't boot to stock recovery, even when i hold down volume and power buttons
i got the recovery using the extractor using huawei

oh my god ok now it is stuck at blue honor screen for an hour after update installed automatically without pressing anything. i just pressed volume and power buttons and it started updating. no menu was provided

now it says your device failed verificitaion

so now the bootloader is locked again and the update installed, but it still doesn't boot and when i try to update again it says verification failed

juicyapply said:
now it says your device failed verificitaion
Click to expand...
Click to collapse
I had the same problem once.
You can try to flash the cust partition of your phone. The "device verification failed"-message should disappear then. It's not enough to only flash boot, system and recovery. If there is a problem with the cust partition of your phone you can also have problems with flashing stock roms via "dload"-method.
1. Download the right stock firmware via the huawei firmware finder. You usually have two .zip files (e.g. update.zip & update_full_BLN-L21_hw_eu.zip). The image file for the cust partition can be found in the update_full_BLN-L21_hw_eu.zip (choose the right one for your model).
2. Unpack update_full_BLN-L21_hw_eu.zip and extract the cust partition with the huawei firmware extractor.
3. Put your phone into fastboot mode
4. Use the following command: fastboot flash cust cust.img
5. Try to boot into your stock rom.