Hi i received today my screen protector that I ordered on aliexpress
http://www.aliexpress.com/item/2pcs...rotector-Full-Body-Explosion/32471481594.html
really nice fit, front and back, edges are nicely rounded.
I noticed that touch is a bit less sensitive
I've got a similar one but haven't noticed any reduction in sensitivity but it was fairly easy to apply and with a 0.33 screen protector like you say the egdes become really nice, almost like Sony designed the phone with that in mind
I went with a .3mm tempered glass protector too. Similar good fit, but I too have noticed a distinct reduction in senstivity. Guess I might have to change back to a more standard protector.
I've got this one and like I've said, no noticeable sensitivity reduction.
Not sure if the picture gives any guidance since most seem to be the same package (but mine was front only) just different paper covers. Also love the fact that it got a typo on compact (compzct) ^^ Chinese high-end :good: The stickers and wipe packages where more or less identical to the ones that was shown on the site for the first post.
I washed my screen with water and soap to remove grease more effectively, then did the normal steps for applying the glass.
I got this, which I had on the Z3C as well and it's perfect.:
http://www.amazon.co.uk/CaseBase%C2%AE-COMPACT-Premium-Tempered-Protector/dp/B0158PWRFM/ref=pd_cp_23_2?ie=UTF8&refRID=0GB0XHJV1NXMR6DV8DD9
I bought a similar Chinese screen protector, but it's way too small. Is there a tempered glass protector that fits perfectly?
Me these
http://www.amazon.it/gp/product/B015UHVPH4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Hispanico
Random Username said:
I bought a similar Chinese screen protector, but it's way too small. Is there a tempered glass protector that fits perfectly?
Click to expand...
Click to collapse
The one I got fits almost perfect, maybe 0.5 mm "gap" around the screen but since the egde is above the normal screen the phone feels more or less completely smooth. How small is your screen compared to the phone?
My tempered protector fits well but it feels like it's a little less responsive.
Sent from my E5823 using Tapatalk
I orderd mine from ebay for 2 euro and its awesome. Dont have any problems with responsiveness but you people that have that problem can try to turn on the handglove mode in dislplay settings so it responds more.
I've never used a tempered glass protector. (Usually use a SGP protector)
Do most of these use an adhesive to bond to the screen? Does it prevent clean removal?
I put this in this morning and it works great: http://www.mobilefun.co.uk/olixar-sony-xperia-z5-compact-tempered-glass-screen-protector-p55394.htm
I'm considering this one by PThink Seems to have alot of good reviews. I'm not sure how well it really works
Just added a Taggshield Tempered Glass 9H Film to my Compact. Fits nice, as mentioned before, almost as if Sony set the glass lower for this to be added. Easy to install, no glue etc.
I wonder how long it will last on, as static holds it on, hoping it will protect the glass from scratchs. Time will tell
I bought this one http://www.aliexpress.com/item/Ultr...ctor-Film-for-Sony-Xperia-Z5/32475934373.html
0.2mm thin, easy to apply
Aliexpress... tempered glass. Cheap but long time to deliver
I have used Orzly Tempered Glass Screen Protector on both my Z5C and Z3C
http://www.amazon.co.uk/gp/product/B0158V7WNI
I'm specifically looking for a protector that has no camera/sensor cutouts - bought one that the picture had none, but it has them (and they're horribly misaligned).
If anyone can link one they have that is cut-out-less I'd be very grateful.
Ultimate Shield?
I have one and this not have cut-outs...
Just to give you guys an update. I bought my glass screen protector a few weeks ago. So easy to install. Dropped my phone from a height of about 5ft onto a sharp edge of metal and then onto concrete. I have a silicon case too. Smashed the screen protector and got a nice dent on the side of my phone but otherwise it's perfect. Any other protector would have allowed my screen to break. Well impressed and new one arriving in a day or two.
Sent from my E5823 using Tapatalk
Related
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
i never bothered because they're so expensive and i screw up the screen anyways so the film type are more easily replaceable
ill probably end up buying 2 or 3 cases and end up using only screen protectors in most situations lol.
to me i rarely drop my phone but i have trouble keeping it out of my pocket with my keys and change, other things. ive been pretty good about it but not perfect.
First off my only problem with tempered glass on my S3 was that it messed with screen responsiveness... Now the ones for the S4 are mostly half the thickness of last years so that should help that problem a lot. The iLoome protector fort the S4 is fully clear and I assume it has adhesive over the entire surface. The sense of mind you get with glass is great. Plus the feel of glass is much better than that of other screen protectors. If you can find one that doesn't take away from screen sensitivity than i'd say it's definitely worth it if you care about your phone.
Sent from my GS3
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
KeithSr said:
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
Click to expand...
Click to collapse
What Brand did you use and how thick was it?
ichilouch said:
What Brand did you use and how thick was it?
Click to expand...
Click to collapse
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
KeithSr said:
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
Click to expand...
Click to collapse
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Spigen film is the way to go... $14 for two protectors and easy to install...
Just watched a review of the Spigen Glas.tR and it is also CLEAR!
Sent from my GS3
I had a glass protector on my GS3 (XGear Spectre, I think) and it worked fine - no loss of sensitivity. It did allow some tiny dust in, but it was easy to lift and wipe it out the couple of times it happened over 8 months. And the week before my S4 came in, I managed to drop the S3 on its face...the screen protector cracked, and the phone is still perfect. Looking at the Spigen one next week just because of that.
Asmodian3 said:
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Click to expand...
Click to collapse
Okay, I found the ad for the flexible glass protector. I ordered it on eBay, this one is very similar even though it is for the Note 2: http://www.ebay.com/itm/Samsung-Gal...193&pid=100040&prg=1011&rk=1&sd=230950051927&
I love this screen protector and am hoping that I will be able to get one for the new S4.
---------- Post added at 12:21 PM ---------- Previous post was at 12:08 PM ----------
I also had the one everyone was talking about at this thread: http://forum.xda-developers.com/showthread.php?t=1920757
But, like someone said previously, it had adhesive only on the outside edges and dust or dirt could get underneath the protector.
I ended up breaking it on the corner when I removed it to clean beneath it.
That does look like a nice one.
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
bobbydsiu said:
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
Click to expand...
Click to collapse
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
thacounty said:
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
Click to expand...
Click to collapse
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
spigen GLAS.tr for what phone?
bobbydsiu said:
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
Click to expand...
Click to collapse
Spigen GLAS.t SLIM = non-rounded borders - (0.23mm) - thinner
Spigen GLAS.tR SLIM = rounded borders (0.4mm)
You're correct the t is the thinner material. Either way it feels great and installs fairly easily.
I had the glas for the s2, I LOVED(easy to clean the screen of finger oils) it, however, it attracted dust underneath the screen protector due to adhesive being only at the edges, I took it off after a couple of months. With the full adhesive, i will definitely buy again for my soon to arrive S4. Especially since I just dropped my s2 face down on the ground and broke the screen a couple weeks back (without case), the glas would serve as a shield.
I wanted to gather some feedback after many of us have had the phone for several months.
In my second week of owning the phone, I put a simple screen protector on and have not taken it off. The bare screen was so smooth and so easy to clean, resisting fingerprints which the screen protector collects like there is glue on it.
Have any of you been running with the device sans a protector, and if so, how has your screen fared in terms of nicks and scratches? I would love to peel mine off if I can be reasonably confident it can live without it.
tebower said:
I wanted to gather some feedback after many of us have had the phone for several months.
In my second week of owning the phone, I put a simple screen protector on and have not taken it off. The bare screen was so smooth and so easy to clean, resisting fingerprints which the screen protector collects like there is glue on it.
Have any of you been running with the device sans a protector, and if so, how has your screen fared in terms of nicks and scratches? I would love to peel mine off if I can be reasonably confident it can live without it.
Click to expand...
Click to collapse
I just ordered my Moto X but I can speak from experience with other Gorilla Glass 3 screens. If you are careful with them you will most likely not get any easily visible scratches, but odds are you will get minor scratches that are only visible under sunlight/directly under a lightbulb. If that would bother you, keep a screen protector on it. If not, take it off.
I just ordered my motox, I was wondering what screen protector or tempered glass you would recommend (I'm from the UK)
varignet said:
I just ordered my motox, I was wondering what screen protector or tempered glass you would recommend (I'm from the UK)
Click to expand...
Click to collapse
Based on what I've read in the tempered glass screen protector thread, there don't seem to be any companies putting out a tempered glass screen protector that works perfectly with the Moto X 2. Because of the slightly curved screen, none of the glass screen protectors will stick properly around the edges.
I haven't used a screen protector in at least 3 years. I hate them, and think they are absolutely pointless. What's the point of protecting the glass if you are never going to actually USE the glass?
I'm using the matte screen protector from Moto's site. Actually really like it. It does degrade image quality when light colors are shown though. Regardless, the matte effect is pretty cool and just having a tiny bit of protection puts me at ease since we still don't have high quality tempered glass options.
You are using the glass, you're looking through it!!
I'm looking for a good screen protector for my Moto X.
I tried these, but they weren't good:
http://www.amazon.co.uk/gp/product/B00NU8CBBU?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Anybody tried a good one?
//nejo01
I have not used screen protector in a few years myself. They won't help if you drop your phone. Also with Gorilla glad it is very hard to get scratches, however I have gotten some micro scratches that can be seen with the lighting just right.
With this phone I have had it for a month now and no scratches.
I really think the screen on this new Moto X is great and I would not recommend a screen protector.
Sent from my XT1095 using Tapatalk
I've dropped mine two times, the second of which was from about 5 feet straight onto concrete. The phone bounced, landed on the screen and slid about a foot. There's not one scratch on it. No screen protector or case. Don't know if I'm extremely lucky or this thing is a tank.
I have dropped my Moto G (1st gen) 57 times. Yes, I keep count
The screen still looked perfect before I gave it to my dad when I got the Moto X. There was one small scratch on the plastic on the back, but it was pretty minuscule in size.
I love the feel of the glass too.
I really don't think screen protectors are necessary even if you are as clumsy as me. I could just be lucky too...
Bad Luck
I've dropped my Moto X 2nd Gen 3 times now and all 3 times the screen got a new crack. I'm getting it replaced since I got MotoCare. The curved glass adds some weakness and since these curved edges extend out past the frame that is the first thing that hits on front face falls. I'm looking for a screen protector, if one exist, that will be able to wrap around the edges.
divergens said:
I have dropped my Moto G (1st gen) 57 times. Yes, I keep count
The screen still looked perfect before I gave it to my dad when I got the Moto X. There was one small scratch on the plastic on the back, but it was pretty minuscule in size.
I love the feel of the glass too.
I really don't think screen protectors are necessary even if you are as clumsy as me. I could just be lucky too...
Click to expand...
Click to collapse
Here's the thing about screen protectors. The cheap (and not so cheap) plastic ones are mostly unnecessary. They won't protect against drops very much (maybe some of the wet apply ones) and give off a way worse feel to the finger than the pure glass. They do protect against scratches, but IMO it's not worth the effort nor the cost.
However, the new(ish) tempered glass screen protectors change a lot of that. Sure, they're kind of expensive, but they actually protect against drops, feel like the glass that's on the phone, and protect against scratches as well. However, it's incredibly apparent that due to the design of the Moto X, few companies are bothering to make this type of screen protector for the phone, and the few that are have made products that don't fit very well to the phone. So there's really no good option here in terms of screen protectors.
From what I've read, there isn't really a good tempered glass screen protector for this device yet. It seems like all of the decent ones still have issues with the sides lifting up due to the curved edges. Has anyone found that covers the entire screen and doesn't have this issue?
Hey guys, My Z3 took a nasty fall onto some tile floor from about 4 feet, flat onto the ground. picked it up and sure enough it's shattered and touch doesn't work now.
$175 replacement, more disappointed in myself than anything.
I want to make sure the new screen is more protected, but I hate most screen protectors. I don't like that they're visible, and I don't like if they affect the viewing.
The best screen protector I've ever had the pleasure of using was actually the one preapplied to the Z1/s I used to have. Never even would have known it was there if not for reading about it on the internet. Is there a similar aftermarket protector I can get for my Z3?
Been thinking of Spigen but not sure.
The glass ones are very nice. They don't affect the screen, however they're very thick compared to the more conventional screen protectors.
Nillkin glass protector is perfect! You don't even see it! For real, and also comes with a back protector (really useful).
lo97 said:
Nillkin glass protector is perfect! You don't even see it! For real, and also comes with a back protector (really useful).
Click to expand...
Click to collapse
+1^ I can confirm this
Sent from my Xperia Z3
Orzly is a bit thinner. its great
https://www.youtube.com/watch?v=sCUFOk9a01U
I have the nillkin as well, purchased the rear glass protector to go with it. The back definitely is not 'hard' as the front, I have several deep scratches that I can actually feel. The anti-finger print coating also sucks...
I wouldn't recommend getting the Nillkin back glass protector.
Glass protector FTW, it has saved my phone twice now. Defiantly recommend a case too, you won't even know it's there.
I have a nillkin glass protector but it's so thick that neither of my two gel cases fits properly over the area where it slightly wraps around the front of the phone.
I have a rhino shield on mine and I'm pretty happy with it.
went ahead with the niilkin, thanks for the advice guys.
msxghost said:
I have a rhino shield on mine and I'm pretty happy with it.
Click to expand...
Click to collapse
Jinxed it. Dropped my phone today and the screen shattered... but the screen protector is basically fine save from a couple puncture holes =/
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.
Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had
kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!
Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.
I managed to get some hair-like fine scratches. I think your full cover helps a lot
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk
kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?
Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress
Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn
crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?
ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.
My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.
Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.
I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.