I need help, i had cm12.1 working on my moto g 2014, and due to some problems i flashed it agian, it did not boot, so i had stock kitkat, i flashed it with twrp and it was working, now i had twrp, but due to my foolishness i flashed cm12.1 recovery, now i cant flash stock roms i don't know why in cm recovery, and my device doesn't boot, how can i install twrp again so that i can put stock?? Or is my phone done for? Is there any solution?
Hi there,
Thanks for using XDA Assist.
Do you have the Moto g 2014 or Moto g 2014 LTE?
Related
Hello
Im using CDMA Moto G XT1031.
I have tried every possible way to go back stock but the phone refuses. Even stock recovery will not show the red exclamation mark and continuous bootloops.
I have tried TWRP but no luck. Only Philz works, so I tapped Clean to install new ROM and flashed CM 11 Nightly via USB OTG (because sideload was not working however fastboot works)
Now even CM refuses to start and throws me back to recovery.
Please help
Thanks
ngr.hd said:
Hello
Im using CDMA Moto G XT1031.
I have tried every possible way to go back stock but the phone refuses. Even stock recovery will not show the red exclamation mark and continuous bootloops.
I have tried TWRP but no luck. Only Philz works, so I tapped Clean to install new ROM and flashed CM 11 Nightly via USB OTG (because sideload was not working however fastboot works)
Now even CM refuses to start and throws me back to recovery.
Please help
Thanks
Click to expand...
Click to collapse
i'm having same problems just like you...i'm on xt1032 o2 germany 4.4.2 with unlock bootloader when this problems begin,..
my problems solved when i'm flash my moto g with a sbf retail who has 4.4.4 kitkat update,..i'm flash my o2 german with germany retail 4.4.2 and then install philz recovery,and update with 4.4.4 german retail using sideload/usb otg and my moto g was back on the track..
but there's one problems,if i'm turn on my moto g normally he will booting to recovery..so i had go to bootloader mode and choose normal power up (option no.1) to normally booting.
mt021322 said:
i'm having same problems just like you...i'm on xt1032 o2 germany 4.4.2 with unlock bootloader when this problems begin,..
my problems solved when i'm flash my moto g with a sbf retail who has 4.4.4 kitkat update,..i'm flash my o2 german with germany retail 4.4.2 and then install philz recovery,and update with 4.4.4 german retail using sideload/usb otg and my moto g was back on the track..
but there's one problems,if i'm turn on my moto g normally he will booting to recovery..so i had go to bootloader mode and choose normal power up (option no.1) to normally booting.
Click to expand...
Click to collapse
But is it safe to flash a GSM image on CDMA just to revive it from virtually dead since factory recovery is also not working, only Philz works?
ngr.hd said:
But is it safe to flash a GSM image on CDMA just to revive it from virtually dead since factory recovery is also not working, only Philz works?
Click to expand...
Click to collapse
the point is that you must flash your moto g with a higher android version from what your moto g installed,...example if you have this problem on 4.3 so you must flash 4.4.2 or 4.4.4 and if on 4.4.2,so flash with 4.4.4..if for this time 4.4.4 update for cdma moto g was not yet available,i think u must wait until 4.4.4 update's coming.
i think cdma and gsm img is a different.
My Moto G is XT1033 varient. I didnt converted it into GPE. Its just normal XT1033 out of box. I unlocked the bootloader and then flash TWRP (2.8.0.1-xt1032) recovery to install CM12. But when i booted into recovery, i got flickering screen. Then i flashed Philz Touch (philz_touch_6.58.7-falcon) and installed CM 12 official by wiping data, system and cache. But i cant get pass through the boot logo. Is there any way to get latest TWRP for XT1033 varient. How can i flash CM 12 in my XT1033 varient without converting it into GPE.
Flash CM11 first. Then flash CM12 over it. Though dual sim is not working on XT1033.
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
I downloaded CM 11. But i cant copy that to my mobile, since it cant surpass the boot screen. i tried adb sideload and adb push. But permission denied. Please help me on this.
Y:cool: said:
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
Click to expand...
Click to collapse
1. No dual sim or just one sim in slot will not work
2. I used philz to flash cm12 and had no problems.
So you didnt convert XT1033 to GPE?
How long it will take to boot up for first time?
HI, Guys
My Moto G X1033 is currently running Brazil Lollipop 5.0.2. I have been looking for a successful way to covert to CM12. Is there any ways???
Thanks.
Convert what? You just flash the zip via custom recovery.
http://forum.xda-developers.com/moto-g/orig-development/rom-official-cyanogenmod-12-nightly-t2994749
elequent said:
HI, Guys
My Moto G X1033 is currently running Brazil Lollipop 5.0.2. I have been looking for a successful way to covert to CM12. Is there any ways???
Thanks.
Click to expand...
Click to collapse
Flah a custom recovery
& wipe /data /cache /Dalvik-cache
Install the CM12 ROm & install GApps
Reboot the phone
Hey, Thanks. But I don't think this applies for the X1033 with updated bootloader. I have tried TWRP recovery, but the screen is flickering and the system didn't boot up after I flash CM12.
Hello,
I decided to go back to stock. I have a backup of the OS, I just need to get TWRP back to Motorola so I can install Lollipop. I don't have the Motorola Recovery stuff. Please help.
Moto G 2013 US GSM Unlocked.
Thanks.
can you give us more details. what ROM are you on now. which stock ROM are you planning to install.
are you using a custom recovery, if so which one and version
Just flash stock firmware.
http://motofirmware.center/files/category/9-moto-g-1st-generation/
Sent from my XT1031
hi.
I have successfully unlocked the bootloader on my moto G 4G (LTE) or XT1039 that has been upgraded to android 5.1
But using old procedure to root it(for android 4.4.4), i doesn't work. I have tried with booting twrp (for the xt1032) and it gets stuck at the motorola logo it displays when shutting down. So it doesn't reboot.
I tried the twrp for xt1032. And it's the same.
I tried twrp for the moto titan but this time seems to become dead. But it's ok to reboot it
I tried the chainfire CAFR autoroot dot chainfire dot eu but the red android never show up and it jsut reboots as normal.
I don't want to flash a custom recovery or a custom rom. I just want to root it. That's why I have unlocked the booloader in the first place.
Anyone got a working solution ?
Is it garanteed it will work with a custom recovery ? and flash a custom rom ?
zebul666 said:
hi.
I have successfully unlocked the bootloader on my moto G 4G (LTE) or XT1039 that has been upgraded to android 5.1
But using old procedure to root it(for android 4.4.4), i doesn't work. I have tried with booting twrp (for the xt1032) and it gets stuck at the motorola logo it displays when shutting down. So it doesn't reboot.
I tried the twrp for xt1032. And it's the same.
I tried twrp for the moto titan but this time seems to become dead. But it's ok to reboot it
I tried the chainfire CAFR autoroot dot chainfire dot eu but the red android never show up and it jsut reboots as normal.
I don't want to flash a custom recovery or a custom rom. I just want to root it. That's why I have unlocked the booloader in the first place.
Anyone got a working solution ?
Is it garanteed it will work with a custom recovery ? and flash a custom rom ?
Click to expand...
Click to collapse
Sorry for the noise but one of these method in fact DID work because I have now root, as I have just discovered by surprise. Could someone delete this thread.