Hi,
I expose my problem , I made my z3 fell and I broke the front glass screen, the touch being out of order, so i got to a fix shop in order they repair my phone..
..1 month later I get my phone, ( they had antenna problem following the change of the screen and touch , .. )
here I am in possession since 2weeks and the screen starts to "take off" I guess cause there are no screws , and a "gap" be created everywhere around the frame , annoying, it is no longer water proof .. ^^
My question: have you a solution to pick the " self" that must t he use?
Sorry for my bad english.
Thank you to you, the community
Best regards.
Related
Hey folks. Over the last couple of weeks I have developed a dead spot on the lower left hand corner of my screen (right in the middle of the graffiti text box). It works fine for all functions except a single click (selecting something or making a period). To do so you have to press down quite hard. I am using a screen protector (and always have), so I am not sure what could be the problem other than a defective unit. I changed the screen protector to see if it made a difference, but it did not. Before I contact HTC, you guys got any ideas? I hate to lose my device for a repair period.
Have you tried a soft and hard reset? Other than these two, the way you described the condition of your unit, it seems you really have to send it back for repairs.
Hi there !
It is better to send your set back to Htc for repair or warranty claim , if you try something else you might just void your warranty which is worse . I 've heard before for laptop screen , some expert use some heavy duty magnet to suck out the black spot or white or blue spot , i think . Please check and ask properly before you use magnets or else again void warranty claim - ok ?
Thanks for reading - jimmunsw
Dead pixels
It looks like dead pixels. If you bought it within a year you can send it back and they will replace it for a new one at no charge.:good:
Hi xda-team and users...
recently i bought a real cheap i5800 on ebay. it works like a charme. there is only one problem (probably the reason of cheap selling):
there is some dirt under the display :-| i can live with it when i have to but when there is an opinion.
its there any way to open the cover and clean the display?
or can i get another cover (maybe the "dirt" is on the cover-side and not directly on the display)
someday i saw a replace cover for my old 5230. maybe there is one for the 5800 (tried google and ebay but i didnt found one).
another idea was to buy this:
xxxx://cgi.ebay.com/New-Samsung-I5800-Dummy-Display-Mobile-Phone-Toy-/200539469221?pt=LH_DefaultDomain_3&hash=item2eb11575a5
and try to open it and replace the original phone cover with the dummy parts. i know nothing about touchscreens (i am an electrician but in another sector) thats my problem.
maybe any1 here can help me with some information.
thx in advance.
Malte41
Just for you to know: i open the case/cover and cleand the touchscreen. It was not that hard as i expected. If any1 need some help with opening i do it again and make some pics for a guide. Just msg me.
Sent from my GT-I5800 using XDA App
yes please, I disasembled 6 screws and REAR (step 4 at service manual) I am affraid of point 5-8 , there are NO steps how to replace front cover what I need :-( ...
- Updated :
After 5+ hours I successfully replaced back cover and front cover too - As service manual is totally GAY and useless for this, I had to experiment - LCD and touch screen does hold to front cover by glue :-( ... and at grey plast what cover LCD and what is the last visible part at GAY useless service manual - you have tu use little force to make it out and dont be affraid of damage it ... .
Hello ,
two days ago this phone glass broke because it fell on the ground.
I want to know is it the glass that broke ( can repare for 15 euro ) or is it the whole LCD that broke ( 100+ euro to repare )
Everything works , the screen is responsive everywhere. The broken part is on the top right of the phone .
There are also vertical color bars now. When I just start phone they aren't here but after some milisecs they come and change everytime I do something too .
Here some pictures ( I can't post urls , those are just tinypic links no virus)
i58.tin ypic. com/15x2wj8.jpg
i60.tin ypic. com/4goyfl.jpg
i62.tin ypic. com/25tyg08.jpg
i58.tin ypic. com/27xdtg4.jpg
Is it the LCD or just the glass ?
Thanks in advance
dodolefou said:
Hello ,
two days ago this phone glass broke because it fell on the ground.
I want to know is it the glass that broke ( can repare for 15 euro ) or is it the whole LCD that broke ( 100+ euro to repare )
Everything works , the screen is responsive everywhere. The broken part is on the top right of the phone .
There are also vertical color bars now. When I just start phone they aren't here but after some milisecs they come and change everytime I do something too .
Here some pictures ( I can't post urls , those are just tinypic links no virus)
https://i58.tinypic.com/15x2wj8.jpg
https://i60.tinypic.com/4goyfl.jpg
https://i62.tinypic.com/25tyg08.jpg
https://i58.tinypic.com/27xdtg4.jpg
Is it the LCD or just the glass ?
Thanks in advance
Click to expand...
Click to collapse
Those lines are on the LCD, so its the LCD, it doesn't look broken really. Maybe the shock of the fall slightly disconnected something on the inside of your device, the ribbon maybe.
Sent from my U.S.S Enterprise NCC-1701-A
So what should I do to repair it? Just open the screen and see if smth is disconnected ? So Or...? it is sure I will need a new glass
You will need a new glass...!
As your lcd is damaged internally !!!
Sent from my GT-S5360 Using tapatalk 2
PreSS ThanKs If i HelPeD YoU ?!?
If I were you I'd take it to Samsung or a pro. But yes, that would be the 1st step
Sent from my U.S.S Enterprise NCC-1701-A
Ok thanks both of you .
I think I'll leave it like it is or take it to a pro like you said .
Thanks
Hello dear community, my dreadiest fear just realized today :
my X2 decided to make one with the concrete...
luckily, both with my heart, only the touchscreen shattered from this unholy union.
So now I want to replace only the broken thing (less expensive) with a replacement part I found on aliexpress (25 € for those wandering), BUT I was unable to find any clue about the separation of the LCD and the touchscreen :
Are they inextricably bound together as the galaxy S series are ?
Or are they just attached with some tape as any good reparable phone should be ?
I was also wandering whether the screen parts were the same between the X1 and the X2 !
If you have any material showing how to proceed with the separation, and care to share them, I'd be in your dept forever !!
Boujou bien !
kwenteen said:
Hello dear community, my dreadiest fear just realized today :
my X2 decided to make one with the concrete...
luckily, both with my heart, only the touchscreen shattered from this unholy union.
So now I want to replace only the broken thing (less expensive) with a replacement part I found on aliexpress (25 € for those wandering), BUT I was unable to find any clue about the separation of the LCD and the touchscreen :
Are they inextricably bound together as the galaxy S series are ?
Or are they just attached with some tape as any good reparable phone should be ?
I was also wandering whether the screen parts were the same between the X1 and the X2 !
If you have any material showing how to proceed with the separation, and care to share them, I'd be in your dept forever !!
Boujou bien !
Click to expand...
Click to collapse
The disassembly should be the same as the X1 video here:
https://www.youtube.com/watch?v=8NOG1SISbKw
Yes I have seen this video, but it is only showing the removing of the screen/touchscreen from the phone, not the separation of the LCD from the touchscreen (they are both broken in the video, hence no point to mess with them !)
kwenteen said:
Yes I have seen this video, but it is only showing the removing of the screen/touchscreen from the phone, not the separation of the LCD from the touchscreen (they are both broken in the video, hence no point to mess with them !)
Click to expand...
Click to collapse
They are fused together so it's not even worth trying to remove them. 99.99% of the time you won't be successful.
Good to know !
I almost succeeded once, with a heated bench, But I'm not willing to try that again…
Did you have to fix yours already ? Any clue about backward compatibility with the X1 assembly (20 % cheaper !) ?
kwenteen said:
Good to know !
I almost succeeded once, with a heated bench, But I'm not willing to try that again…
Did you have to fix yours already ? Any clue about backward compatibility with the X1 assembly (20 % cheaper !) ?
Click to expand...
Click to collapse
I imagine they would be the same display assembly but I'm not 100 percent sure.
I Sat on my Huawei honor X2 -Screen is not working Properly
Hello (posted this in wrong area a few weeks ago)
I sat on my X2 GEM-703L under several pillows - bend was 1/2 inch - the top & bottom were 1/2 inch lower than center . I carefully bent it straight (there is a small kink in metal frame right side just above center button. Everything else seems to work beside the screen. *** I will push "4" and the key adjacent character is recognized, also it will type on its own or type 3-5 characters when I only pushed one...
Questions:. Does this sound like touch screen Replacement will fix these issues??? Or is thier additional interface hardware attached with the touch screen, or both?
- I really like that phone - hoping it is not a lost cause...
Thanks for your help
Gary
Gary2017 said:
Hello
Questions:. Does this sound like touch screen Replacement will fix these issues??? Or is thier additional interface hardware attached with the touch screen, or both?
- I really like that phone - hoping it is not a lost cause...
Click to expand...
Click to collapse
Hello Gary, sorry just saw your post.
I Think this might be fixed by a change of screen, but the problem might also come from the bent frame too.
For the tactile to work properly, and not register wrong input, the screen needs to be grounded and I think also calibrated to the phone caracteristics. If you just replace the screen, it's environment would not be the same as it is suppose to be anymore (frame with a kink) hence there is a risk that the new screen might reacts weirdly, registering ghost input etc... Because the screen might not rest flat on the support frame, and the contacts used for grounding might not be working anymore.
I have a spare screen that I*just bought for mine, unfortunately my problem seems to come from the motherboard, so the screen is useless for me.
If you want to give it a try, and live in the US, pm me !
If you don't want to do it (the screen comes without a frame, so you have to use your old one)
I'm willing to buy your phone to try to save mine ! :angel:
Best,
Quentin.
my new D6633 Z3 dual ....i opened the package my self
turns out to have a speakers problems : sometimes it makes noise with notifications .... i never thought its a problem ...
anyhow .... my phone got splashed with water in a pool , IT DID NOT touch the pool , just a splash in the lower speaker ..
5 minutes later .... no screen and no touch response !!!!! .....
so in a maintenance center they opened the phone and found water coming from the lower speaker which turned out its NOT completely sealed , or broken sealed , which makes the noise also in sounds .....
my friend who bought also same phone with me Had EXACTLY the same issue ....
i had to replace screen with 115$ ..... SHAME ON YOU SONY !
BE CAREFUL FRIENDS ...
If they acknowledged that the water came from the speaker not properly sealed it's entirely a defect and you shall not pay anything (even out of warranty).
rommo_911 said:
my new D6633 Z3 dual ....i opened the package my self
turns out to have a speakers problems : sometimes it makes noise with notifications .... i never thought its a problem ...
anyhow .... my phone got splashed with water in a pool , IT DID NOT touch the pool , just a splash in the lower speaker ..
5 minutes later .... no screen and no touch response !!!!! .....
so in a maintenance center they opened the phone and found water coming from the lower speaker which turned out its NOT completely sealed , or broken sealed , which makes the noise also in sounds .....
my friend who bought also same phone with me Had EXACTLY the same issue ....
i had to replace screen with 115$ ..... SHAME ON YOU SONY !
BE CAREFUL FRIENDS ...
Click to expand...
Click to collapse
Not good 4 u
tiliarou said:
If they acknowledged that the water came from the speaker not properly sealed it's entirely a defect and you shall not pay anything (even out of warranty).
Click to expand...
Click to collapse
True, but in my country there is no sony service centre, so it was my friend who fixed it for me. ( commercial service center)