Has anyone found a case for the Moto X Pure (Style) that has a covered USB port?
I bring my phone into the shower with me to listen to music, and I want to do whatever I can to prevent water from getting into the USB port. I know that the phone is somewhat water-repellent with its coating, but I'm guessing that frequent exposure to steam & water droplets will eventually corrode the MicroUSB port.
kent1146 said:
Has anyone found a case for the Moto X Pure (Style) that has a covered USB port?
I bring my phone into the shower with me to listen to music, and I want to do whatever I can to prevent water from getting into the USB port. I know that the phone is somewhat water-repellent with its coating, but I'm guessing that frequent exposure to steam & water droplets will eventually corrode the MicroUSB port.
Click to expand...
Click to collapse
Maybe throw it in a ziplock bag? or a Bluetooth speaker thats water resistant?
Check out the i-blason armorbox. Amazon shows black and blue color choices, I thought I saw a white version too the other day
http://www.amazon.com/dp/B0153T7U00/ref=twister_B0153T7SUC?_encoding=UTF8&psc=1
Both ports are fully covered.
What about otterbox? I'm pretty sure they are making the Defender series for the MXPE.
Sent from my XT1575 using Tapatalk
chris23445 said:
http://www.amazon.com/dp/B0153T7U00/ref=twister_B0153T7SUC?_encoding=UTF8&psc=1
Both ports are fully covered.
Click to expand...
Click to collapse
countryfolk07 said:
What about otterbox? I'm pretty sure they are making the Defender series for the MXPE.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Neither are waterproof if the OP is taking his phone into the shower.
Either put in ziplock or why not just put the phone right outside of the shower on top of the sink, toilet bowl? Unless he's in like a locker room shower or dorm.
Thanks for the suggestions. I'm goign to keep looking for another solution, because I'm always stuck between the desire to get drop / water protection that a case provides, and the bulk that the case adds.
iazybandit said:
Neither are waterproof if the OP is taking his phone into the shower.
Click to expand...
Click to collapse
Well, to clarify, I don't need water*PROOF*. The phone isn't getting submerged in water, or exposed to direct streams of water. My phone would sit on a ledge / shelf in the shower stall, for purposes of either playing music or videos while I shower. The water danger would be from droplets of water splashing into the micro USB port, and eventually corroding the metal contacts over time.
I'm actually thinking of looking for small rubber Micro USB port covers or plugs, that would simply make it hard for splashed water to get into the phone. I think between that, and the water-resistant coating on the phone, that it would be enough for the level of water exposure I'm looking to protect against.
kent1146 said:
The water danger would be from droplets of water splashing into the micro USB port, and eventually corroding the metal contacts over time. I'm actually thinking of looking for small rubber Micro USB port covers or plugs, that would simply make it hard for splashed water to get into the phone.
Click to expand...
Click to collapse
Just as a follow-up, I ended up getting a bunch of rubber plugs for the Micro USB port. Paid about $1.75 for 25 of these things, and they do the job. It will probably be a pain to keep losing them, but at least it gives me the dust & water protection that I want.
Related
Lately I have been thinking of a DIY home waterproofing for my phone... I've been throwing around a couple of ideas after seeing the Liquipel website. Surely there must be something we can do to water-proof or water-resist our Cappy!?
I have a couple old phones which I am willing to experiment different processes on, and then dunk into water.
Does anyone have any ideas?
My first thought is covering the insides with some kind of varnish with the phone taken apart...
-SGA- said:
My first thought is covering the insides with some kind of varnish with the phone taken apart...
Click to expand...
Click to collapse
Varnish even if its less flamable when dry, may cause overheating. If you wait a few years this will surely become available to the public.
http://www.diginfo.tv/v/12-0065-r-en.php
IMHO, with today's technology you can only make the Captivate water resistant ,,,,to a point. Due to the open headphone jack, micro USB connector, volume keys, power button, and removable battery - all with metal contacts - water proofing will not work if the phone is completely soaked. A better solution would be a one piece case that allows full use of the screen, volume, and power buttons. Plugged in headphone and usb connection would only work with the case off. But I don't know how big the market would be for such a case..Good Luck
Not to mention if u coat cappy it would over heat because water proof phone are not made to dissipate heat the way the cappy is
Sent from my SGH-I897 using xda premium
Liquipel uses nano technology to coat the inside and outside from water. It repels liquid hence the name. I am not sure why I didn't follow through with sending my sgs2 to them when I first got it since they are only 5 minutes from my work. My next phone will get it for sure. Their technology coats it so well that even the liquid sensors will always stay white and not get wet. They showed how to at one of the electronic conventions when they completely dunked it under water and let it sit there. I think I read they even took pictures with a phone under water while it was dunked.
Sent from My SGH-I777 Running Red Reaper Rom
ThreeofNine said:
IMHO, with today's technology you can only make the Captivate water resistant ,,,,to a point. Due to the open headphone jack, micro USB connector, volume keys, power button, and removable battery - all with metal contacts - water proofing will not work if the phone is completely soaked. A better solution would be a one piece case that allows full use of the screen, volume, and power buttons. Plugged in headphone and usb connection would only work with the case off. But I don't know how big the market would be for such a case..Good Luck
Click to expand...
Click to collapse
Amazing how little you really know! There are many companies out there, that "waterproof" your electronic toy using nano technology! Google it and see for yourself!
G
p.s. not subscribed
Tell your tale!!
I personally wouldn't dare to do it. Knowing my luck, I'll probably have a faulty device lolol
Took the s8+ to the pool several times over the week. Was fine. Just need to wait for charging port to dry; but the s8 gives warning sign if you plug your phone with a wet port. No worries at all.
Washed mine under the tap , delicate flow, after eating greasy food.
Haven't dared since the day my Sony Xperia Z3 went in the bath with its IP68 rating and I was greeted with bubbles as the phone filled up!
I got a replacement but still, twitchy bum time
Had a bucket of water poured on mine by a young family member. It was in an otterbox defender and didn't have any issues at all.
I always take my S8+ with me, also under water.
I don't know why, but I feel much safer than with my old S7 edge.
Charging... I always user wireless charge at work and in my car, so my S8 is always full at home and I never need an cable .
jackdown said:
I always take my S8+ with me, also under water.
I don't know why, but I feel much safer than with my old S7 edge.
Charging... I always user wireless charge at work and in my car, so my S8 is always full at home and I never need an cable .
Click to expand...
Click to collapse
Is that in fresh water? Or salt water? I've heard salt water is no good to any of the water resistant devices. I just ordered my device so I'm doing some preliminary learning
jmckeejr said:
Is that in fresh water? Or salt water? I've heard salt water is no good to any of the water resistant devices. I just ordered my device so I'm doing some preliminary learning
Click to expand...
Click to collapse
It would have to be freshwater purely based off the fact tadpoles cannot survive in saltwater. Chlorinated or salt water can attack and erode the rubber gaskets and seals that protect your device from water. Overtime these could weaken, leaving your phone exposed to damage from moisture, not to mention salt water is a good conductor of electricity.
Here in Australia a screen replacement for this device is $700AUD so I've just got mine in a Lifeproof case regardless of any IP ratings.
Just in case anyone is wondering like I was, I cannot recommend the Lifeproof FRE for Galaxy S8 as there's such a big gap between the front plastic screen cover and the actual LCD itself. I basically have to hammer the screen to type and it makes these "clacking noises" as the screen comes in contact with the plastic.
ScoOby-Do0 said:
It would have to be freshwater purely based off the fact tadpoles cannot survive in saltwater. Chlorinated or salt water can attack and erode the rubber gaskets and seals that protect your device from water. Overtime these could weaken, leaving your phone exposed to damage from moisture, not to mention salt water is a good conductor of electricity.
Here in Australia a screen replacement for this device is $700AUD so I've just got mine in a Lifeproof case regardless of any IP ratings.
Just in case anyone is wondering like I was, I cannot recommend the Lifeproof FRE for Galaxy S8 as there's such a big gap between the front plastic screen cover and the actual LCD itself. I basically have to hammer the screen to type and it makes these "clacking noises" as the screen comes in contact with the plastic.
Click to expand...
Click to collapse
Since you're in Australia... Take the case to the place of purchase and ask for a full refund. According to Consumer Affairs, if a product does not work as advertised you're entitled for a replacement or a refund.
Lifeproof cases are very expensive (over $AU100). You expect them to be perfect at that price!
Well I had my first experience
Spilt warm coffee on my phone.
Ran to the hotel sink and washed off the phone.
Blow dried it to get rid of the moisture in the speaker grill and charging port. Good as new!!
Cheap waterproof case...
Last week I decided to take an image under water (fresh). Put her in at least three different times. Got a notification saying there was water detected in the charging port and to make sure it is dry before using. Today, my s8 is still working like new. Here's the image I got (unedited)!
So I've been keeping my S8 Plus as my backup to my Note 8 since the weekend the N8 came out. My kid sister dropped her iPhone and pretty much killed it so I lent her my S8 Plus until she got a new phone. Well, she only went and broke up the tip of an aux plug inside the headphone jack. It seems the aux cord was pretty old or just compromised somehow. She was in her car when she pulled the aux out of the phone but noticed the tip was stuck inside the phone. Lovely.
In the mean time, I've lent her my USB-C to Aux adapter until I can get the tip out of the headphone jack. I'm averse to using any kind of glue because I don't want to risk leaving any sticky residue inside (hold laughter). I have a smartphone repair kit with some very thin tweezers but they couldn't get a firm grip on the aux bit.
Have y'all seen this kind of issue firsthand and if so do you have any tips to getting this thing out? Thanks!
First check to see of the plug shaft that was broken, is attracted to a magnet.
If so, my first thought would be to take a nail the same diameter, or just slightly more thin as the plug shaft, cut the end off square to the nail shaft, or grind it off. Get a reasonably strong magnet. Insert the nail shaft into the headphone jack hole, and gently put it up against the broken off piece. Place the strong magnet on the nail shaft. Slowly and gently pull and twist as you remove the nail.
roaduardo said:
So I've been keeping my S8 Plus as my backup to my Note 8 since the weekend the N8 came out. My kid sister dropped her iPhone and pretty much killed it so I lent her my S8 Plus until she got a new phone. Well, she only went and broke up the tip of an aux plug inside the headphone jack. It seems the aux cord was pretty old or just compromised somehow. She was in her car when she pulled the aux out of the phone but noticed the tip was stuck inside the phone. Lovely.
In the mean time, I've lent her my USB-C to Aux adapter until I can get the tip out of the headphone jack. I'm averse to using any kind of glue because I don't want to risk leaving any sticky residue inside (hold laughter). I have a smartphone repair kit with some very thin tweezers but they couldn't get a firm grip on the aux bit.
Have y'all seen this kind of issue firsthand and if so do you have any tips to getting this thing out? Thanks!
Click to expand...
Click to collapse
What you need is super glue I know you said no glue but this is how I fixed my iPad when this happened and a cotton bud or que tip
You cut the cotton wool off the cotton bud so you are left with the hollow tube then apply a small ammount of super glue on the tip of the tube and I mean tiny amount and then put that in your headphone jack and let it set for 10-15 mins then you should be able to remove the aux tip by pulling the cotton bud out and if you done this correctly there should be no glue left inside the headphone port
---------- Post added at 11:41 PM ---------- Previous post was at 11:38 PM ----------
downloaderbyproxy93 said:
What you need is super glue I know you said no glue but this is how I fixed my iPad when this happened and a cotton bud or que tip
You cut the cotton wool off the cotton bud so you are left with the hollow tube then apply a small ammount of super glue on the tip of the tube and I mean tiny amount and then put that in your headphone jack and let it set for 10-15 mins then you should be able to remove the aux tip by pulling the cotton bud out and if you done this correctly there should be no glue left inside the headphone port
Click to expand...
Click to collapse
Edit here is a link for a laptop but it is the same principle https://www.google.co.uk/url?sa=t&s...QQwqsBCCgwAA&usg=AOvVaw0VTJzWxrN8ZFOD4xbU2nov
Hmm... In my experience super glue typically requires 24 hours to fully cure, right? I think I've heard of applicators you can spray on to speed it up but that's just more liquid being used around this phone which makes me uneasy.
I would second a drop of super glue one a tooth pick then with a light make sure it's centered. That little bit of glue will dry in a matter of 30 min to a hour.
roaduardo said:
Hmm... In my experience super glue typically requires 24 hours to fully cure, right? I think I've heard of applicators you can spray on to speed it up but that's just more liquid being used around this phone which makes me uneasy.
Click to expand...
Click to collapse
That's how I done it when I done this method when I broke the aux bit in my iPad and now it works fine
I sliced a straw from a juice box and put it around the outside of the broken aux plug then I hollowed out the inside of a pen and put a tiny dan of the gel style gorilla glue on the inside of the pen. slide it down inside the straw and wait for it to harden 5 min pull the whole thing out worked great
Sent from my [device_name] using XDA-Developers Legacy app
Is USB port in Oneplus 6 fully waterproof? On that video it looks like. It looks like it was filled with plastic behind the pins.
Today I wanted to clean USB port with isopropyl alcohol and I filled port with that (I used too much of isopropyl). Now I'm afraid if some of alcohol could get inside my phone. Is it possible? I don't think so because on video it looks like it is 100% waterproof but I would like to know what do you think about that.
the phone isn't IP Certified but OnePlus has already stated that the phone is resilient to the weather (in example the rain, etc wouldn't really screw over the phone). I don't think the alcohol will screw up your phone, i'd assume the phone will be okay at the end of the day
Isopropyl alcohol won't do anything to your phone. It evaporates too fast and is not electrically conductive. But this phone is not anything close to 100% waterproof.
Hi there, I want to know where I can find a replacement part for the N986U model for the charging port board... I have been trying to search on eBay, Amazon, with no luck... are parts interchangeable? meaning? could I just buy a charging port board from an G986U and use it instead, would this work fine?
Thanks
You need the exact part for that variant version.
Otherwise you may find it charges fine but has no internet connection. That happen on my 10+.
That silly PCB controls more than just charging...
blackhawk said:
You need the exact part for that variant version.
Otherwise you may find it charges fine but has no internet connection. That happen on my 10+.
That silly PCB controls more than just charging...
Click to expand...
Click to collapse
Oh crap, thanks for mentioning that, I would think and hope that just buying that part would be able to fix it, but it clearly don't as you mentions, that board handles other stuff too....
any recommendations of where to look for that specific part?
Samsung Galaxy Note 20 Ultra 5G Parts
High quality Samsung Galaxy Note 20 Ultra 5G repair parts include screen replacement, charging flex, sim tray are available in our website. We ship order in 24 hours. Contact us for wholesale price.
www.deviceparts.com
Only place I can see that carries the USB-C port.
This is only the port (it can be replaced independently from the board).
rjohnstone said:
Samsung Galaxy Note 20 Ultra 5G Parts
High quality Samsung Galaxy Note 20 Ultra 5G repair parts include screen replacement, charging flex, sim tray are available in our website. We ship order in 24 hours. Contact us for wholesale price.
www.deviceparts.com
Only place I can see that carries the USB-C port.
This is only the port (it can be replaced independently from the board).
Click to expand...
Click to collapse
dang. but I need that special soldering machine eh?
Get the part number off the PCB. It must be the exact same number. The last letter designates the variant version if it's like the 10+'s.
Fun times...
Replace the battery too if it's getting weak. Get the OEM seals too so you can seal it properly. Use anhydrous isopropyl to help free the adhesive strips when disassembling.
0xNOP said:
dang. but I need that special soldering machine eh?
Click to expand...
Click to collapse
It doesn't require soldering. It has a connector on the back side. Basically snap/press it on.
Here's a proper teardown.
Samsung Galaxy Note 20 and Note 20 Ultra Teardown
We’re on a mission to tear down all the Galaxy...
www.ifixit.com
0xNOP said:
dang. but I need that special soldering machine eh?
Click to expand...
Click to collapse
No, I don't think so. It's likely just a ribbon cable/micro connector.
Watch a tear down vid or two.
blackhawk said:
Get the part number off the PCB. It must be the exact same number. The last letter designates the variant version if it's like the 10+'s.
Fun times...
Replace the battery too if it's getting weak. Get the OEM seals too so you can seal it properly. Use anhydrous isopropyl to help free the adhesive strips when disassembling.
Click to expand...
Click to collapse
Sounds like an awesome adventure if you tell me
alrighty then! lets do it!
0xNOP said:
Sounds like an awesome adventure if you tell me
alrighty then! lets do it!
Click to expand...
Click to collapse
Remember to disconnect the battery first if you easily can. Take your time and don't force anything.
Follow ESD protocols if possible; at least have room humidity at 50% or higher and work on a bare wood table. No wool sweaters... cotton is best.
Out of circuit subassemblies are suspectable to ESD damage.
blackhawk said:
Remember to disconnect the battery first if you easily can. Take your time and don't force anything.
Follow ESD protocols if possible; at least have room humidity at 50% or higher and work on a bare wood table. No wool sweaters... cotton is best.
Out of circuit subassemblies are suspectable to ESD damage.
Click to expand...
Click to collapse
Gotcha , thank you so much for helping me out on this! Will give this a shot and will come back with the updates!!
0xNOP said:
Gotcha , thank you so much for helping me out on this! Will give this a shot and will come back with the updates!!
Click to expand...
Click to collapse
I am wondering how this went? We’re you successful? I have a N20U and i am starting to think it would be good to have a new battery. Wondering whether i can do this and still maintain reasonable water resistance? Any advice will be most helpful
william-johnson said:
I am wondering how this went? We’re you successful? I have a N20U and i am starting to think it would be good to have a new battery. Wondering whether i can do this and still maintain reasonable water resistance? Any advice will be most helpful
Click to expand...
Click to collapse
Watch vids on it.
Have the battery level at 30% or less. Disconnect as soon as reasonibly possible during disassembly. Do Not use force more force than is needed. Slow and steady.
Take your time, don't force anything. No rush.
Use only plastic for prying and wedging.
You need a temp controlled hot plate used for things like this or a hot air gun.
You need the right sized drivers, tweezers and picks.
Use a syringe with anhydrous isopropyl alcohol to help break the seal adhesive on the rear and the battery.
You need a OEM rear cover seal or aftermarket equivalent.
Best to raise room humidity to 50%. If you have a ESD mat and wrist strap, use them. Otherwise use a cotton cloth on a bare wood surface. Wear all cotton clothing. The mobo and display are suspectable to ESD damage when out of circuit.
Be careful not to damage the connectors use a suitable pair of tweezers.
Do not over torque the screws; they will strip out ie inch/pounds not foot/pounds.
Reassemble exactly as it was.
Thanks
blackhawk said:
Watch vids on it.
Have the battery level at 30% or less. Disconnect as soon as reasonibly possible during disassembly. Do Not use force more force than is needed. Slow and steady.
Take your time, don't force anything. No rush.
Use only plastic for prying and wedging.
You need a temp controlled hot plate used for things like this or a hot air gun.
You need the right sized drivers, tweezers and picks.
Use a syringe with anhydrous isopropyl alcohol to help break the seal adhesive on the rear and the battery.
You need a OEM rear cover seal or aftermarket equivalent.
Best to raise room humidity to 50%. If you have a ESD mat and wrist strap, use them. Otherwise use a cotton cloth on a bare wood surface. Wear all cotton clothing. The mobo and display are suspectable to ESD damage when out of circuit.
Be careful not to damage the connectors use a suitable pair of tweezers.
Do not over torque the screws; they will strip out ie inch/pounds not foot/pounds.
Reassemble exactly as it was.
Click to expand...
Click to collapse
Thanks
william-johnson said:
Thanks
Thanks
Click to expand...
Click to collapse
You're welcome.
Labor rates may not be as bad as you think.
Might get it done for $50-70. It's not near as difficult as some claim it to be if you have the skillset and tools. The 20U is likely similar in construction to the N10+.
After watching my N10+'s battery replaced I learned the tricks and realized it wasn't that hard. I already have most of the tools I need. So next the one I will do myself. I've done a lot of electronic assembly work and have replaced 2 Canon cameras LCD displays including a pro cam... successfully.
The parts you don't want to damage; the mobo, the display (battery sits on top of it, attached with double sided adhesive tape), the camera module as these are expensive parts.
The rear cover is cheap to replace; avoid excessive bending or it will shatter. The ribbon cables and such are cheap but harder perhaps to find.