hello guys . im new about the phone, i live in colombia but i bought my phone from amazon is imported from europe, is new but what i found is that the phone is rooted and from what i read in here and i just check download mode i saw taht know warranty is void 0x1, is not a problem really i wasnt expecting to have full warranty, rigth now the phone is using firmware N9005XXUBMJ1, i can updated from kies to the last one, i wanted to aks, if this gonna give me some problems ? am i gonna lost the root, or region sim unclock
javi3k said:
hello guys . im new about the phone, i live in colombia but i bought my phone from amazon is imported from europe, is new but what i found is that the phone is rooted and from what i read in here and i just check download mode i saw taht know warranty is void 0x1, is not a problem really i wasnt expecting to have full warranty, rigth now the phone is using firmware N9005XXUBMJ1, i can updated from kies to the last one, i wanted to aks, if this gonna give me some problems ? am i gonna lost the root, or region sim unclock
Click to expand...
Click to collapse
You bought the phone used I assume? hence it being already rooted and 0x1?
If you update to MJ7 (latest) yes you will lose root because it comes with a new bootloader, but since you are 0x1 already you can re-root without worrying about your warranty.
You may need to be careful regarding REGION Lock though... Not sure if updating reactivates it or not. So read up loads before you do anything to it!
thanks i see, mmmm but how this region lock work i mean this phone is from europe that mean i can only put oficial rom from there ? or it will work whit all other rom whitout a problem
REGION Lock is where the phone is locked to a certain region aka Europe / USA / Latin America etc, If your phone is the European model in theory it won't work where you are presently, Unless the region lock has been disabled via the method Samsung require (country of purchase - one 5 minute phone call made to release the lock, so an EU simcard used first)
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
MaximusDacicus said:
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
Click to expand...
Click to collapse
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
LS.xD said:
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
Click to expand...
Click to collapse
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
MaximusDacicus said:
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
Click to expand...
Click to collapse
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
LS.xD said:
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
Click to expand...
Click to collapse
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
MaximusDacicus said:
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
Click to expand...
Click to collapse
what region is the leaked fw for?
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
MaximusDacicus said:
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
Click to expand...
Click to collapse
Thats due to its a branded rom you tried to install (COA = cosmote branded).
Here is the unbranded version you need (ROM = unbranded for your country):
--> http://samsung-updates.com/details/24878/Galaxy_S_4_Snapdragon/GT-I9505/ROM/I9505XXUFNB9.html
Evening,
Getting back in the Android game (havent had a droid since a sg3) and i ordered a SM-G955F turns out the device is from panama (TPA csc)?
I want to use samsung pay on it, from what i am reading i need to flash it with a UK version of the firmware.
Just a couple questions to put my mind at ease
A. Will I need a UK sim card available after the flashing (im in the US and only have my ATT one available)
B . Will this cause my knox to be tripped (aka rooted) as i cannot be rooted and use this for work. I think the answer is no from what ive read here....
Thanks for any and all help
asjeep
https://www.sammobile.com/forum/showthread.php?t=39155use this tutorial !!! It helped me !!! Change my csc from rom to: btu,phn,xeo and now i'm on dbt*? status : official ; knox 0x0 !!!
amosolidu said:
https://www.sammobile.com/forum/showthread.php?t=39155use this tutorial !!! It helped me !!! Change my csc from rom to: btu,phn,xeo and now i'm on dbt* status : official ; knox 0x0 !!!
Click to expand...
Click to collapse
i tried it and got a "pit"error... must be incorrect files?
Seach with Google:
COMBINATION_FA70_G955FDXU1AQD1_CL11075180_QB130870 97_REV00_user_mid_noship.tar if your phone is unbranded s8+
amosolidu said:
Seach with Google:
COMBINATION_FA70_G955FDXU1AQD1_CL11075180_QB130870 97_REV00_user_mid_noship.tar if your phone is unbranded s8+
Click to expand...
Click to collapse
I tried that file and got further, when i tried to flash it and the ap only it runs very fast then stops at nad_refer and goes no further.
Any thoughts?
Thanks for your help
NVM i wasnt using the home csc file... all is working...
thanks so much!!!!
Hello guys,
so some months ago my aunt approached me asking me to "repair" her phone which didn't boot anymore after she installled an OTA update.
Now she is been greeted by the Samsung Logo and the message "Custom binary locked by frp lock" and that in an ongoing loop.
What I tried:
> flashing several stock roms (Android 6, Android 7 oldest version and newest versions)
> flashing roms from other countries in EU (UK, Austria, CH)
> flashing with ODIN and KIES (Kies didn't really work tho)
but all of it didn't work.
I fear that I might didn't check if "Re-Partition" was checked in Odion because after several tries and downloading thos Stock Roms with 20 Kb/s I was kinda frustrated when it didn't work..
currently the phone is still boot-looping with the same message as before.
It doesn't matter if I loose every data, as my aunt has a new phone by now!
If the phone has be re-partitioned by Odin is there anyway to fix it or better what are the signs for a Re-Partition?
Thank you in advance!
Paachan said:
Hello guys,
so some months ago my aunt approached me asking me to "repair" her phone which didn't boot anymore after she installled an OTA update.
Now she is been greeted by the Samsung Logo and the message "Custom binary locked by frp lock" and that in an ongoing loop.
What I tried:
> flashing several stock roms (Android 6, Android 7 oldest version and newest versions)
> flashing roms from other countries in EU (UK, Austria, CH)
> flashing with ODIN and KIES (Kies didn't really work tho)
but all of it didn't work.
I fear that I might didn't check if "Re-Partition" was checked in Odion because after several tries and downloading thos Stock Roms with 20 Kb/s I was kinda frustrated when it didn't work..
currently the phone is still boot-looping with the same message as before.
It doesn't matter if I loose every data, as my aunt has a new phone by now!
If the phone has be re-partitioned by Odin is there anyway to fix it or better what are the signs for a Re-Partition?
Thank you in advance!
Click to expand...
Click to collapse
I am a noob in this, but logicaly reasoning i would say you bricked it bad by flashing away with all kind of csc and firmware down and upgrades.
Your aunt will not be happy.
Jopponius said:
I am a noob in this, but logicaly reasoning i would say you bricked it bad by flashing away with all kind of csc and firmware down and upgrades.
Your aunt will not be happy.
Click to expand...
Click to collapse
Well this reply isn't really that helpful...
1st she doesn't care anymore because as mentioned she already has a new phone and said I can just keep it or throw it away.
2nd even if it's bricked there are ways to get it back to working, I soft bricked my old HTC M8 once and restored it.
3rd If you're a noob with this just don't reply, I've never had experience with Samsung phones before thats why I'm seeking for help, if it comes to HTC or LG phones I usually get things done myself. Not in this case tho.
Jopponius said:
I am a noob in this, but logicaly reasoning i would say you bricked it bad by flashing away with all kind of csc and firmware down and upgrades.
Your aunt will not be happy.
Click to expand...
Click to collapse
No, as was already stated, it bricked with an OTA, flashing different stock ROMs & CSCs would not brick it
---
Try using Samsung SmartSwitch emergency firmware recovery, I think you'll need the phones serial number (Box / back of phone)
Other than that, using ODIN 3.12.3 or newer with the correct stock ROM & CSC the phone originally came with (newest available release), using CSC and not HOME_CSC to force a reset after the flash should work, then you'll need her google account login to get past the FRP lock
*Detection* said:
No, as was already stated, it bricked with an OTA, flashing different stock ROMs & CSCs would not brick it
---
Try using Samsung SmartSwitch emergency firmware recovery, I think you'll need the phones serial number (Box / back of phone)
Other than that, using ODIN 3.12.3 or newer with the correct stock ROM & CSC the phone originally came with (newest available release), using CSC and not HOME_CSC to force a reset after the flash should work, then you'll need her google account login to get past the FRP lock
Click to expand...
Click to collapse
These kind of replies is what I need, thank you! Sadly when trying to use Smart Switch it instructs me to use some kind of "Backup Code" from another PC, I know for a fact my aunt doesn't do any backups and she doesn't even have a proper privat PC. I have a the original packaging IME and such at my hands!
You said flashing with Odin after a flash should work, but should I first use the "HOME_CSC" to flash and then the normal "CSC" to reset it afterwards?
The CSC file is a carrier customization file.: https://forum.xda-developers.com/s7-edge/help/csc-home-csc-simple-t3464835
audit13 said:
The CSC file is a carrier customization file.: https://forum.xda-developers.com/s7-edge/help/csc-home-csc-simple-t3464835
Click to expand...
Click to collapse
so in this case with the DBT version it's just the default customization file from Samsung, am I right?
Flashing either Home_CSC or CSC didn't had any effect on the S7 tho, it's still stuck in Boot loop with FRP Lock.
Let's say the phone is soft bricked, is there any way to get it back working, so I can flash the stock firmware afterwards`?
Paachan said:
These kind of replies is what I need, thank you! Sadly when trying to use Smart Switch it instructs me to use some kind of "Backup Code" from another PC, I know for a fact my aunt doesn't do any backups and she doesn't even have a proper privat PC. I have a the original packaging IME and such at my hands!
You said flashing with Odin after a flash should work, but should I first use the "HOME_CSC" to flash and then the normal "CSC" to reset it afterwards?
Click to expand...
Click to collapse
SmartSwitch Windows version shouldn't ask for any backup codes, only maybe the phone serial number
And no, just forget about HOME_CSC, use CSC instead, this will initiate a factory reset after the flash
AP
BL
CP
CSC
Add all 4 parts to ODIN, put the phone in Download Mode (Volume Down & Home & Power) connect to PC USB and hit start on ODIN (3.12.3 or newer)
It "Should" flash the firmware and factory reset, and so long as there is no hardware fault, it should boot into Android and ask for the Google Login that was connected to the phone before it bricked, once you enter that it will allow the rest of the setup to continue and finally to homescreen
It is possible that there is a hardware fault that caused the OTA to brick in the first place, or that the phone is not what it claims to be (Check in download mode which model it says it is, some are faked to look like International G930F when they are actually Snapdragon US models and require different firmware
If it is G930F, then flashing the latest DBT should work fine so long as it is not hardware related
*Detection* said:
SmartSwitch Windows version shouldn't ask for any backup codes, only maybe the phone serial number
And no, just forget about HOME_CSC, use CSC instead, this will initiate a factory reset after the flash
AP
BL
CP
CSC
Add all 4 parts to ODIN, put the phone in Download Mode (Volume Down & Home & Power) connect to PC USB and hit start on ODIN (3.12.3 or newer)
It "Should" flash the firmware and factory reset, and so long as there is no hardware fault, it should boot into Android and ask for the Google Login that was connected to the phone before it bricked, once you enter that it will allow the rest of the setup to continue and finally to homescreen
It is possible that there is a hardware fault that caused the OTA to brick in the first place, or that the phone is not what it claims to be (Check in download mode which model it says it is, some are faked to look like International G930F when they are actually Snapdragon US models and require different firmware
If it is G930F, then flashing the latest DBT should work fine so long as it is not hardware related
Click to expand...
Click to collapse
That actually helps me a ton, the Product name is fine it says it's a SM-930F so non US, I guess?
After flashing it with the newest available Stock Android 6 firmware (on which it was shipped originally) doesn't lead to anything it's still stucked in boot loop.
I guess it's a hardware fault then and not recoverable in the first place, thank you very much for your help!
I'm gonna try one last time with an older Version of Odin, maybe this leads to something!
Have a great day
I recommend flashing the same firmware onto the phone. Trying to flash an older bootloader may cause the flash process to stop as downgrading the bootloader is usually not permitted.
Do you know if oem unlock was enabled in the ROM settings? I'm not 100% but this may contribute to the issues with factory resetting and getting the phone to work.
Partitioning is not usually required if the computer is able to read he phone's partition table information. If a re-partition is required, you need to use the correct pit file for the phone when flashing a stock ROM in Odin.
audit13 said:
I recommend flashing the same firmware onto the phone. Trying to flash an older bootloader may cause the flash process to stop as downgrading the bootloader is usually not permitted.
Do you know if oem unlock was enabled in the ROM settings? I'm not 100% but this may contribute to the issues with factory resetting and getting the phone to work.
Partitioning is not usually required if the computer is able to read he phone's partition table information. If a re-partition is required, you need to use the correct pit file for the phone when flashing a stock ROM in Odin.
Click to expand...
Click to collapse
the OEM unlock setting was on default, so off I guess? It was just a regular OTA update and then the phone was stuck in a boot loop.
As *Detection* said it's probably is a hardware related issue I just now noticed that the status LED doesn't even light up if you charge the device (maybe this is an idicator)
I would've gladly used it as a backup device but I think it's just an expensive paperweight by now.
Still thank you for your help, appreciate it!
Sounds like you have tried all you can on your own. Maybe take it to a cell repair shop and have them try to force flash the phone using hardware such as an octopusbox?
Paachan said:
That actually helps me a ton, the Product name is fine it says it's a SM-930F so non US, I guess?
After flashing it with the newest available Stock Android 6 firmware (on which it was shipped originally) doesn't lead to anything it's still stucked in boot loop.
I guess it's a hardware fault then and not recoverable in the first place, thank you very much for your help!
I'm gonna try one last time with an older Version of Odin, maybe this leads to something!
Have a great day
Click to expand...
Click to collapse
Yep G930F is International Exynos so you should be good
Some people have problems downgrading from 7.0 to 6.0, what I meant was flash the latest available firmware for DBT, which is 7.0
2018-04-23
Germany
7.0
G930FXXS2DRDI
As above, the bootloader can be a pain to downgrade, so always try unbricking with the latest firmware available
Same process as I posted above, only using the firmware in this post ^^
Good luck
---------- Post added at 19:59 ---------- Previous post was at 19:50 ----------
Paachan said:
I just now noticed that the status LED doesn't even light up if you charge the device (maybe this is an indicator)
Click to expand...
Click to collapse
Yea that doesn't sound good, possibly a faulty motherboard, they seem to be quite a high % of hardware faults of the S7 on XDA, at least that is the outcome of sending them in for repair, but also could be the repair centres way of making the most £
Paachan said:
the OEM unlock setting was on default, so off I guess? It was just a regular OTA update and then the phone was stuck in a boot loop.
As *Detection* said it's probably is a hardware related issue I just now noticed that the status LED doesn't even light up if you charge the device (maybe this is an idicator)
I would've gladly used it as a backup device but I think it's just an expensive paperweight by now.
Still thank you for your help, appreciate it!
Click to expand...
Click to collapse
What version bootloader is it running go to download mode to find out top left corner last line of writing will be AP SWREV B:? what number is next to the B you will need to match this to the firmware you are trying to flash for example i use unbranded australian G930FXXU2DRBE firmware and in download mode my AP SWREV is B:2 the number signifies the bootloader its running some exapmes are below for you
AP SWREV B:1 = G930FXX "U1" DRBE
AP SWREV B:2 = G930FXX "U2" DRBE
AP SWREV B:3 = G930FXX "U3" DRBE
You need to match the number next to AP SWREV B:? with the firmware number "U?" For it to work even if it is the same marshmallow or nougat OS it must use the correct bootloader and firmware appropriate to be able to boot i have encountered this problem on numerous occasions if you try to flash a U1 to a U2 binary it will not boot it will not even write it to the memory and you will end uo with a bricked device until the appropriate firmware has been flashed using odin.
You need to also make sure you are using the latest version of odin and have all the drivers installed to your pc for the phone also the status led will not illuminate either while its bricked like this either you will not get this until the OS has been repaired.
If none of this works you could always flash TWRP to it with odin in the AP tab download linage 15.1 oreo 8.1 custom rom for G930F exynos and a gapps .ZIP files move them to an sd card and insert into phone boot into twrp swipe to allow modifications first tap back up and select EFS & BASEBAND and backup this contains your imei number you always should have a back up before flashing a custom rom just incase something goes wrong now after that go to wipe tap the format button on the right and select everything exept otg this will wipe everything and i mean everything OS related which is really want you want to do and also remove the DM verity encryption from the device to be able to boot no after that go to install and select the .ZIP rom and gapps and install after boot you can then re flash stock rom with odin and it should boot however warranty will be void and samsung KNOX will be triggered which means secure file cannot be used nor samsung health app however there is a simple solution i have found to get samsung health running on a rooted device i hope this helps its always worked for me ive purposly bricked my dev G930F so many times on purpose even lost the imei number before and gotten it back without flashing the backup they are really quite hard phones to break software wise.
Thanks
Matty1993
Matty1993 said:
What version bootloader is it running go to download mode to find out top left corner last line of writing will be AP SWREV B:? what number is next to the B you will need to match this to the firmware you are trying to flash for example i use unbranded australian G930FXXU2DRBE firmware and in download mode my AP SWREV is B:2 the number signifies the bootloader its running some exapmes are below for you
AP SWREV B:1 = G930FXX "U1" DRBE
AP SWREV B:2 = G930FXX "U2" DRBE
AP SWREV B:3 = G930FXX "U3" DRBE
You need to match the number next to AP SWREV B:? with the firmware number "U?" For it to work even if it is the same marshmallow or nougat OS it must use the correct bootloader and firmware appropriate to be able to boot i have encountered this problem on numerous occasions if you try to flash a U1 to a U2 binary it will not boot it will not even write it to the memory and you will end uo with a bricked device until the appropriate firmware has been flashed using odin.
You need to also make sure you are using the latest version of odin and have all the drivers installed to your pc for the phone also the status led will not illuminate either while its bricked like this either you will not get this until the OS has been repaired.
If none of this works you could always flash TWRP to it with odin in the AP tab download linage 15.1 oreo 8.1 custom rom for G930F exynos and a gapps .ZIP files move them to an sd card and insert into phone boot into twrp swipe to allow modifications first tap back up and select EFS & BASEBAND and backup this contains your imei number you always should have a back up before flashing a custom rom just incase something goes wrong now after that go to wipe tap the format button on the right and select everything exept otg this will wipe everything and i mean everything OS related which is really want you want to do and also remove the DM verity encryption from the device to be able to boot no after that go to install and select the .ZIP rom and gapps and install after boot you can then re flash stock rom with odin and it should boot however warranty will be void and samsung KNOX will be triggered which means secure file cannot be used nor samsung health app however there is a simple solution i have found to get samsung health running on a rooted device i hope this helps its always worked for me ive purposly bricked my dev G930F so many times on purpose even lost the imei number before and gotten it back without flashing the backup they are really quite hard phones to break software wise.
Thanks
Matty1993
Click to expand...
Click to collapse
Holy, this is a pretty explicit answer, thank you!
Judging by that I seem to have the right firmware for my Boatloader:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for my late reply!
Paachan said:
Holy, this is a pretty explicit answer, thank you!
Judging by that I seem to have the right firmware for my Boatloader:
Sorry for my late reply!
Click to expand...
Click to collapse
No problem for the late reply yep firmware looks good matches to the BL however i noticed its says your binary and OS are custom when it should say official in donload mode was it previously rooted at some point ? Also have you downloaded the firmware from sammobile ? I would suggest using them for full original firmware packages as they have not been altered and will not apprear as custom when you try to flash with odin, does it complete the flash process and say pass or does it say fail ? Youll also notice when you flash on the screen of the phone it will have a progress bar in sync with odin does it complete the process and reboot or does it say blocked by frp lock if it says blocked by frp lock the firmware your trying to flash is not official you will need official firmware also as it already says custom find a twrp recovery.tar from the twrp website open odin place it in the AP section as soon as it reboots hold the power home ans volume up buttons until twrp appears swipe to allow modifications now go to wipe instead of factory resetting there will be a button saying format on the right tap that and type yes this will erase everything including the custom os it has on it i want you to do this step first before trying to flash the original firmware package as it will wipe everything for a fresh clean install.
Paachan said:
Holy, this is a pretty explicit answer, thank you!
Judging by that I seem to have the right firmware for my Boatloader:
Sorry for my late reply!
Click to expand...
Click to collapse
I'm not 100% sure about this, but that firmware states S2 not U2
See here, my BL is B:2 but all of the firmware files I can successfully flash are U2
Matty1993 said:
No problem for the late reply yep firmware looks good matches to the BL however i noticed its says your binary and OS are custom when it should say official in donload mode was it previously rooted at some point ? Also have you downloaded the firmware from sammobile ? I would suggest using them for full original firmware packages as they have not been altered and will not apprear as custom when you try to flash with odin, does it complete the flash process and say pass or does it say fail ? Youll also notice when you flash on the screen of the phone it will have a progress bar in sync with odin does it complete the process and reboot or does it say blocked by frp lock if it says blocked by frp lock the firmware your trying to flash is not official you will need official firmware also as it already says custom find a twrp recovery.tar from the twrp website open odin place it in the AP section as soon as it reboots hold the power home ans volume up buttons until twrp appears swipe to allow modifications now go to wipe instead of factory resetting there will be a button saying format on the right tap that and type yes this will erase everything including the custom os it has on it i want you to do this step first before trying to flash the original firmware package as it will wipe everything for a fresh clean install.
Click to expand...
Click to collapse
Actually scratch that frp lock is on you cannot flash anything custom to it while it is on just download your firmware from sammobile they have every country and are 100% official i will only download my firmwarw from there it is completely free to make an account and download the only thing is download speeds are slow so will take 2-3 hours to download is the only downfall but gauranteed to be official once downloaded place The files in corresponding slots in odin but with CSC just use CSC & not HOME_CSC this will perform a full wipe
Also maybe download U2 firmware aswell as S2 firmware
Matty1993 said:
Actually scratch that frp lock is on you cannot flash anything custom to it while it is on just download your firmware from sammobile they have every country and are 100% official i will only download my firmwarw from there it is completely free to make an account and download the only thing is download speeds are slow so will take 2-3 hours to download is the only downfall but gauranteed to be official once downloaded place The files in corresponding slots in odin but with CSC just use CSC & not HOME_CSC this will perform a full wipe
Click to expand...
Click to collapse
samfirm tool on XDA is full speed and downloads the latest stock ROM for whichever device you enter, direct from samsung servers
*Detection* said:
samfirm tool on XDA is full speed and downloads the latest stock ROM for whichever device you enter, direct from samsung servers
Click to expand...
Click to collapse
Or that also maybe yeah try U2 firmware instead of S2 as far as im aware S2 is the first of the B:2 binary updates