Related
just did a clean install v20d via lgmdp and then rooted it, thus loosing all the custom recovery (CR)
now here the problem arises...
installed ROM manager and found that it isn't showing the CR for new baseband (BB), just shows for the old one
installed goo manager and found that it still isn't compatible with our device
i found a file "twrp-thunderg-2.0.0alpha1.img" on internet while searching for device compatibility
now what should I do to install custom recovery?
all i have is .img files for both clockwork and twrp. I don't trust twrp coz they still aren't showing official status for our device
update -
i flashed recovery via lgmdp tool
but still, whats with the recovery mess?
Not sure. Possibly not supported anymore.
You can also use shinobisofts recovery flash tool.
I had done same as you and used it to flash cwm.
savagephoenix said:
Not sure. Possibly not supported anymore.
You can also use shinobisofts recovery flash tool.
I had done same as you and used it to flash cwm.
Click to expand...
Click to collapse
He figured out he could also flash a recovery with LGMDP.
---------- Post added at 11:46 PM ---------- Previous post was at 11:41 PM ----------
van_helsing_80 said:
update -
i flashed recovery via lgmdp tool
but still, whats with the recovery mess?
Click to expand...
Click to collapse
The recovery is a mechanism to repair or restore the devices OS. It is also utilized to install ROMs and updates.
sorry, what I meant was regarding the incompatibilities with the recovery. That was kind of you to explain what recovery is.
hello all, I'm a noobie. I'd very much appreciate any help... I want to backup my rom . no custom rom is installed, yet.
I'm rooted. have trwp on sprint samsung s5. build number kot49h.g900pvpu1ane5 .
I boot manually to recovery. the green android drops dead with a (!).
the choices are:
reboot device now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cach partition
apply update from cache
no option for backing up. any guidance would be helpful. thanks,
hal
That sounds like stock recovery. You need to get a custom recovery on there. You said you have twrp, how did you try to install it?
metalfan78 said:
That sounds like stock recovery. You need to get a custom recovery on there. You said you have twrp, how did you try to install it?
Click to expand...
Click to collapse
,
Thanks for responding. I used TWRP manager root when I tried to install twrp recovery. But I never actually booted into twrp.
I have philz_touch_6.41.6-klte
Will it work, and if so, how do I install it?
Have you ever used Odin? That's the best way.
---------- Post added at 04:25 PM ---------- Previous post was at 04:25 PM ----------
Philz has been the most reliable for backup and restore.
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2737724
Root Sprint S5....Step-by-Step
metalfan78 said:
Have you ever used Odin? That's the best way.
---------- Post added at 04:25 PM ---------- Previous post was at 04:25 PM ----------
Philz has been the most reliable for backup and restore.
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
http://forum.xda-developers.com/showthread.php?t=2737724
Root Sprint S5....Step-by-Step
Click to expand...
Click to collapse
here's what I did to get to where I was when I started the thread:
1. followed instructions in the qbking video that's mentioned in the step-by-step root thread here http://forum.xda-developers.com/show....php?t=2737724
2. that method uses odin. it seems to have worked. I verified root using root checker basic.
3. installed TWRP manager root.
4. could not boot into recovery using twrp manager or manually. could not back up to ext sd card from twrp mangr. . applied nextapp kitkat sd card fix.
5. using titanium root, backed up apps and data to external sd. no problem.
6. changed ext storage in twrp manager to ext sd. still won't back up rom to ext sd. tried "live backup" with changed storage location to ext sd. nope, the backup went into internal storage.
I am still rooted. can I switch from twrp to phiz? how would I do that? thanks for any help.
I never use 'manager' apps, I don't trust them. You can switch recoveries anytime you want to. I would use Odin since you can't get to recovery. Do you have the recovery tar file for Odin?
---------- Post added at 07:46 AM ---------- Previous post was at 07:45 AM ----------
http://forum.xda-developers.com/showthread.php?t=2783571
[RECOVERY][CWM][ODIN] Custom Recovery Repository (SM-G900P)
following the qbking video, I rooted with Odin using CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5
I'm not sure that answers your question. if not, please clarify, and I'll try again
That doesn't install your recovery. Download Philz from the link I posted.
metalfan78 said:
That doesn't install your recovery. Download Philz from the link I posted.
Click to expand...
Click to collapse
it worked. I booted into recovery, and am waiting for my first backup to finish.
thanks very much for your help and patience.
Right on man, glad I could help
After a Long Time Of Disappoinment Without a Custom Recovery To Our Beloved GPro2.. Im Thrilled To Announce That Now We Have a Unlocked BL+Custom Recovery To Our GPRO2 LOLLIPOP!!
CWM RECOVERY FOR GPRO2-F350SLK AND D838!!
Here You Go..
HOW TO INSTALL..
First..You Need To Be In 4.4.2 KitKat With a Custom Recovery Installed.
And You Must Have a Lollipop Custom Or Stock Version In a CWM Flashble Format. KDZ WILL NOT WORK.
And Then.. Download The Recovery Pack For The Corresponding Model.
Extract Both Recovery Pack and Your ROM. (Extract Means,Double Click and Open)
COPY THE SYSTEM.IMG FROM YOUR ROM TO RECOVERY ZIP FILE.
Finally You Need Have YourModel_5.0_Recovery_BY_YKLS Porject.zip File With System.img In It!! (Clear Enough Right? )
Boot Into Recovery.. Flash YourModel_5.0_Recovery_BY_YKLS Porject.zip
Wipe Data and Cache If You Want To. (Recommended)
Reboot and You Will Have a Lollipop With CWM Pre Installed!! *YAY!!*
NOTE-Press VolUp and Power Button Both At The Power OFF State and When The Black Screen Appears,Release Them.You'll Be On Recovery.
BUG-Recovery Is In Chinease.I Will Try To Build a English One ASAP.
Recovery Is In Chinease and Its Ugly...*Eww* How Do I Change That To English?
Download The RECOVERY APK (See The Attachment)
Install It As a Normal Apk and Open It!
Click On Flash Recovery,Grand Superuser Permission.
When Its Done,Click Reboot To Recovery.
BAM!! NOW YOU HAVE A OFFICIAL LOLLIPOP,WITH UNLOCKED BOOTLOADER PLUS ENGLISH PHILZ RECOVERY!!!
DOWNLOADS!!
FOR D838
FOR F350K
FOR F350L
FOR F350S
You Wanted Screenshots.. Here You Go With a PROOF VIDEO.
Click Here
Just Hit Thanks To Share Your Happiness With Me.
Thanks for the news, we've been waiting for this! However, I've a question. I've installed another recovery that works with the phone and a bit easier to install and works both on 350 and 838. Here's the link:
http://pan.baidu.com/s/1mgHZuLM
Should I switch over to this since for some reasons I'm not able to activate Xposed after flashing through recovery.
glasseffects said:
Thanks for the news, we've been waiting for this! However, I've a question. I've installed another recovery that works with the phone and a bit easier to install and works both on 350 and 838. Here's the link:
http://pan.baidu.com/s/1mgHZuLM
Should I switch over to this since for some reasons I'm not able to activate Xposed after flashing through recovery.
Click to expand...
Click to collapse
If you read the Xposed thread you will see many discussion about this. Apparently you need the app for Xposed user interface and also need to add a module and then reboot.
Sent from my LG-D838 using XDA Free mobile app
pereradileepa said:
After a Long Time Of Disappoinment Without a Custom Recovery To Our Beloved GPro2.. Im Thrilled To Announce That Now We Have a Unlocked BL+Custom Recovery To Our GPRO2!!
CWM RECOVERY FOR GPRO2-F350SLK AND D838!!
Here You Go..
HOW TO INSTALL..
First..You Need To Be In 4.4.2 KitKat With a Custom Recovery Installed.
And You Must Have a Lollipop Custom Or Stock Version In a CWM Flashble Format. KDZ WILL NOT WORK.
And Then.. Download The Recovery Pack For The Corresponding Model.
Extract Both Recovery Pack and Your ROM. (Extract Means,Double Click and Open)
COPY THE SYSTEM.IMG FROM YOUR ROM TO RECOVERY ZIP FILE.
Finally You Need Have YourModel_5.0_Recovery_BY_YKLS Porject.zip File With System.img In It!! (Clear Enough Right? )
Boot Into Recovery.. Flash YourModel_5.0_Recovery_BY_YKLS Porject.zip
Wipe Data and Cache If You Want To. (Recommended)
Reboot and You Will Have a Lollipop With CWM Pre Installed!! *YAY!!*
NOTE-Press VolUp and Power Button Both At The Power OFF State and When The Black Screen Appears,Release Them.You'll Be On Recovery.
BUG-Recovery Is In Chinease.I Will Try To Build a English One ASAP.
DOWNLOADS!!
FOR D838
FOR F350K
FOR F350L
FOR F350S
Just Hit Thanks To Share Your Happiness With Me.
Click to expand...
Click to collapse
Thanks for your work mate
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
glasseffects said:
Thanks for the news, we've been waiting for this! However, I've a question. I've installed another recovery that works with the phone and a bit easier to install and works both on 350 and 838. Here's the link:
http://pan.baidu.com/s/1mgHZuLM
Should I switch over to this since for some reasons I'm not able to activate Xposed after flashing through recovery.
Click to expand...
Click to collapse
May i know how you flashed this recovery? I've tried using adb , fastboot , flashify but have'nt been able to flash this recovery
F350s on Future 3.1 rooted. Any help would be appreciated.
Ahmed Xperia p said:
Thanks for your work mate
---------- Post added at 06:42 PM ---------- Previous post was at 06:37 PM ----------
May i know how you flashed this recovery? I've tried using adb , fastboot , flashify but have'nt been able to flash this recovery
F350s on Future 3.1 rooted. Any help would be appreciated.
Click to expand...
Click to collapse
I do not wish to overahadow this thread with another issue. Though, for the sake of information:
1. Uncompress the file and change the name of the folder in which you have the recovery files to anything you like.
2. Move that folder to your desktop
3. Now on your phone, enable USB Debugging and Unknown Sources.
4. Connect your device to computer and run the .bat file in the extracted folder on your computer.
5. Press any key when prompted. The phone will reboot into recovery if successful.
6. You Now have CWM based Recovery on phone.
First two steps aren't necessary, but the folder contains special characters that may interfere with ADB. At least it happened in my case, thus the precaution.
---------- Post added at 03:55 PM ---------- Previous post was at 03:46 PM ----------
JohnnyInBriz said:
If you read the Xposed thread you will see many discussion about this. Apparently you need the app for Xposed user interface and also need to add a module and then reboot.
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
Johnny, I've tried every possible combination to no avail. The bridge is installed but not activated. It simply refuses to work with or without modules, or no matter how many times I flash before or after installing the Xposed interface apk.
Any suggestion would be great!
@glasseffects will try this now. Thanks for your help.
Changing folders name was indeed essential . I changed folder names and voila. Thanks for guidance
Sent from my LG-F350L using XDA Free mobile app
COPY THE SYSTEM.IMG FROM YOUR ROM TO RECOVERY ZIP FILE.
Click to expand...
Click to collapse
Copy and Zip again ?
---------- Post added at 02:27 PM ---------- Previous post was at 02:23 PM ----------
The system.img is 3.4GB, right?
Just put it into the root of Recovery folder, and zip it again, right?
The Recovery.zip is only 50MB.
---------- Post added at 02:51 PM ---------- Previous post was at 02:27 PM ----------
Do I need to create a folder "rom" and put the system.img into it?
yplim2300 said:
Copy and Zip again ?
---------- Post added at 02:27 PM ---------- Previous post was at 02:23 PM ----------
The system.img is 3.4GB, right?
Just put it into the root of Recovery folder, and zip it again, right?
The Recovery.zip is only 50MB.
---------- Post added at 02:51 PM ---------- Previous post was at 02:27 PM ----------
Do I need to create a folder "rom" and put the system.img into it?
Click to expand...
Click to collapse
nop.just copy the system.img into 50mb zip file’s root directory. like you said in first. then install it via recovery like a rom.
Sent from my LG-D838 using XDA Free mobile app
so if i am already on the 5.0.1 without a recovery but with root
what should i do ??
madsatan said:
so if i am already on the 5.0.1 without a recovery but with root
what should i do ??
Click to expand...
Click to collapse
Hope that someone develops an apk or a batch file to install it via ADB. The only other option is to revert to KK
Sent from my LG-D838 using XDA Free mobile app
JohnnyInBriz said:
Hope that someone develops an apk or a batch file to install it via ADB. The only other option is to revert to KK
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
Not meaning to sound rude but that is incorrect - there is a way to flash recovery once you have Lollipop using adb. see Post #2 in this thread.
madsatan said:
so if i am already on the 5.0.1 without a recovery but with root
what should i do ??
Click to expand...
Click to collapse
Use the recovery on second post.
samtheman said:
Not meaning to sound rude but that is incorrect - there is a way to flash recovery once you have Lollipop using adb. see Post #2 in this thread.
Click to expand...
Click to collapse
Thought I mentioned ADB
Sent from my LG-D838 using XDA Free mobile app
samtheman said:
Not meaning to sound rude but that is incorrect - there is a way to flash recovery once you have Lollipop using adb. see Post #2 in this thread.
Click to expand...
Click to collapse
Hello, i have update mu G pro 2 to official TWN lollipop via KDZ and i have no root, can i install custom recovery via adb? And get root from flashing the supersu zip?
Im sorry if i asking a rude question, im too afraid to try, afraid of brick my phone
Sent from my LG-D838 using XDA Premium 4 mobile app
JohnnyInBriz said:
Hope that someone develops an apk or a batch file to install it via ADB. The only other option is to revert to KK
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
im gonna give a try but im not sure about replacing bootloader via adb will work. will see.
Sent from my LG-D838 using XDA Free mobile app
pereradileepa said:
After a Long Time Of Disappoinment Without a Custom Recovery To Our Beloved GPro2.. Im Thrilled To Announce That Now We Have a Unlocked BL+Custom Recovery To Our GPRO2 LOLLIPOP!!
CWM RECOVERY FOR GPRO2-F350SLK AND D838!!
Here You Go..
HOW TO INSTALL..
First..You Need To Be In 4.4.2 KitKat With a Custom Recovery Installed.
And You Must Have a Lollipop Custom Or Stock Version In a CWM Flashble Format. KDZ WILL NOT WORK.
And Then.. Download The Recovery Pack For The Corresponding Model.
Extract Both Recovery Pack and Your ROM. (Extract Means,Double Click and Open)
COPY THE SYSTEM.IMG FROM YOUR ROM TO RECOVERY ZIP FILE.
Finally You Need Have YourModel_5.0_Recovery_BY_YKLS Porject.zip File With System.img In It!! (Clear Enough Right? )
Boot Into Recovery.. Flash YourModel_5.0_Recovery_BY_YKLS Porject.zip
Wipe Data and Cache If You Want To. (Recommended)
Reboot and You Will Have a Lollipop With CWM Pre Installed!! *YAY!!*
NOTE-Press VolUp and Power Button Both At The Power OFF State and When The Black Screen Appears,Release Them.You'll Be On Recovery.
BUG-Recovery Is In Chinease.I Will Try To Build a English One ASAP.
Recovery Is In Chinease and Its Ugly...*Eww* How Do I Change That To English?
Download The RECOVERY APK (See The Attachment)
Install It As a Normal Apk and Open It!
Click On Flash Recovery,Grand Superuser Permission.
When Its Done,Click Reboot To Recovery.
BAM!! NOW YOU HAVE A OFFICIAL LOLLIPOP,WITH UNLOCKED BOOTLOADER PLUS ENGLISH PHILZ RECOVERY!!!
DOWNLOADS!!
FOR D838
FOR F350K
FOR F350L
FOR F350S
Just Hit Thanks To Share Your Happiness With Me.
Click to expand...
Click to collapse
The apk file, can it be used on Lollipop G Pro 2?
Or do I need to go back to KitKat?
---------- Post added 22nd February 2015 at 12:55 AM ---------- Previous post was 21st February 2015 at 11:55 PM ----------
xb360 said:
The apk file, can it be used on Lollipop G Pro 2?
Or do I need to go back to KitKat?
Click to expand...
Click to collapse
I have tried to use the apk and flash the recovery on Lollipop, then reboot recovery, but nothing happen, it just stuck at LG logo.
xb360 said:
The apk file, can it be used on Lollipop G Pro 2?
Or do I need to go back to KitKat?
---------- Post added 22nd February 2015 at 12:55 AM ---------- Previous post was 21st February 2015 at 11:55 PM ----------
I have tried to use the apk and flash the recovery on Lollipop, then reboot recovery, but nothing happen, it just stuck at LG logo.
Click to expand...
Click to collapse
Same thing happened. Even cop system.img into recovery zip also same thing.
JohnnyInBriz said:
Thought I mentioned ADB
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
the recovery wont mount on my external sd card....
Can I confirm that by following the instructions in post one, do I get recovery in Lollipop?
@pereradileepa does it work on your device? Can you share the screenshot?
Hey there.... a lot of people are asking for the ftf file for the dual sim version and it wasn't available online.... So here you go this is customized Indian version.....
link ------------------> https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
Flash via flashtool...
Thanks.
It just saved my stucked phone.
Can you say what was customized?
The ROM is running 100% fine in the brazilian version of the E3 D2212.
I did the root thing, and installed a custom kernel for memory swap.
Thank you for posting the ROM link.
henridoug said:
It just saved my stucked phone.
Can you say what was customized?
The ROM is running 100% fine in the brazilian version of the E3 D2212.
I did the root thing, and installed a custom kernel for memory swap.
Thank you for posting the ROM link.
Click to expand...
Click to collapse
It's customized because it has got those Indian apps such as sony liv and everything like that which I don't see on the other versions...But anyways.. as long as it helped you it's good... You're welcome.
Thank you so much for this great stuff
I downloaded this firmware for my phone d2212...i hope it will save my phone....i have some problem in my sony xperia E3dual (d2212)after rooting my phone ....i tried to add mx player pro as a system app just after restarting my phone...with the help of lucky patcher... i tried this process so many times for other apps too...but this this i was not good time...because sd card take some time to prepair to load apps to run on phone after restarting app...and between making mxplayer as a sustem app my phone got a big problem...it was unable to switch on...only cwm recovery is opening .......i will try to flash this firmware giver by you here to flash this from my lapton soon ...but i have a little cunfusion about flashing custom rom ....my problem is that....what is boot.img and kernal.img and clockwork mode recovery and busybox and supersu..........as i know little bit and learn from here only that...these are used and nessasary for rooted device (supersu and busybox) ..i downloaded latest firmware tool and java runtime and firmware ftf file to for my phone already...now i wanna know that i i flash this rom from flashtool then weather i loose my root access or not and it contain boot and kernal img already or not ....or i have to flash kernal img in fastboot mode first.....sorry for my some spelling mistakes ...i hope any one of you can helo me .....because now today i can't even open my cwm recovery too.. it stop on black screen with sony logo...i use power butoon and volume up key upto continous three vibrate to switch of my phone now....any help please i wanna only flash this file (D2212 18.5.B.0.26 Customized IN FTF )to ge my phone work
again
Thanks thank f9r giving time to read my this long msg ....waiting for response :crying:
CMPATIL said:
I downloaded this firmware for my phone d2212...i hope it will save my phone....i have some problem in my sony xperia E3dual (d2212)after rooting my phone ....i tried to add mx player pro as a system app just after restarting my phone...with the help of lucky patcher... i tried this process so many times for other apps too...but this this i was not good time...because sd card take some time to prepair to load apps to run on phone after restarting app...and between making mxplayer as a sustem app my phone got a big problem...it was unable to switch on...only cwm recovery is opening .......i will try to flash this firmware giver by you here to flash this from my lapton soon ...but i have a little cunfusion about flashing custom rom ....my problem is that....what is boot.img and kernal.img and clockwork mode recovery and busybox and supersu..........as i know little bit and learn from here only that...these are used and nessasary for rooted device (supersu and busybox) ..i downloaded latest firmware tool and java runtime and firmware ftf file to for my phone already...now i wanna know that i i flash this rom from flashtool then weather i loose my root access or not and it contain boot and kernal img already or not ....or i have to flash kernal img in fastboot mode first.....sorry for my some spelling mistakes ...i hope any one of you can helo me .....because now today i can't even open my cwm recovery too.. it stop on black screen with sony logo...i use power butoon and volume up key upto continous three vibrate to switch of my phone now....any help please i wanna only flash this file (D2212 18.5.B.0.26 Customized IN FTF )to ge my phone work
again
Thanks thank f9r giving time to read my this long msg ....waiting for response :crying:
Click to expand...
Click to collapse
you have to flash it with flashtool (I suppose you know how to do that) and yes it will take away all the root access so you will have to root your phone again(I suppose you know how to do that as well)... and you can make mx player your system app by using link2sd app though i don't understand why do u want to make it a system app???
ShanePunk123 said:
you have to flash it with flashtool (I suppose you know how to do that) and yes it will take away all the root access so you will have to root your phone again(I suppose you know how to do that as well)... and you can make mx player your system app by using link2sd app though i don't understand why do u want to make it a system app???
Click to expand...
Click to collapse
Thank you so much for your help... i think we can move apps to either in phone or in sd card from app to sd bro...and i am telling about making app as asystem app so thattmy those apps stay as usual even after factory reset ...thanks for your great help about flashing rom bro :highfive::good:
CMPATIL said:
Thank you so much for your help... i think we can move apps to either in phone or in sd card from app to sd bro...and i am telling about making app as asystem app so thattmy those apps stay as usual even after factory reset ...thanks for your great help about flashing rom bro :highfive::good:
Click to expand...
Click to collapse
you're welcome... thought link2sd app has an option of changing user apps to system apps.... see in the screenshot which i have attached... It's a better and secure way than using lucky patcher...
flashing error
ShanePunk123 said:
you're welcome... thought link2sd app has an option of changing user apps to system apps.... see in the screenshot which i have attached... It's a better and secure way than using lucky patcher...
Click to expand...
Click to collapse
hello bro thanks bro for your screen shot .... I am still unable to flash this custom ROM in my Android phone I can open only cwm Recovery....but can't boot to system,it stuck on sony logo when i try to start it normally...and when i tried to flash this above given rom on my D2212(sony Xperia E3 dual)i got an error msg that you have to keep check on
unknown app source and usb debug on,,, which is not possible for me because now i can't enter to that location,,,sorry for my weak English...i will try to add the screen shot of my flashing process soon so you can help me .......thanks once again i will be so happy if i can recover my phone back in good working condition
CMPATIL said:
hello bro thanks bro for your screen shot .... I am still unable to flash this custom ROM in my Android phone I can open only cwm Recovery....but can't boot to system,it stuck on sony logo when i try to start it normally...and when i tried to flash this above given rom on my D2212(sony Xperia E3 dual)i got an error msg that you have to keep check on
unknown app source and usb debug on,,, which is not possible for me because now i can't enter to that location,,,sorry for my weak English...i will try to add the screen shot of my flashing process soon so you can help me .......thanks once again i will be so happy if i can recover my phone back in good working condition
Click to expand...
Click to collapse
You don't have to worry about getting the usb debugging on.... just make sure you connect the phone in flash mode... to do so press the volume down button and connect to your pc while the volume button is pressed... a green led will flash once stating that it has been connected in flash mode to the pc... make sure your pc has drivers installed for sony and flashmode and fastboot mode... to do so install flashtool and it will install the important drivers even if it doesn't then you can go to the installation directory of flash tool on your pc and install the flashmode drivers manually. after that it's an easy process to flash the firmware and this is not a custom rom this is the stock 4.4.4 firmware customized india version. PS don't use windows 8 use windows 7.
Thanks bro finally I got my working phinr back?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source ?
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,,????? and my phone is on my hand in working condition with stock rom ? I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source) ?????????
---------- Post added at 12:56 PM ---------- Previous post was at 12:46 PM ----------
CMPATIL said:
Thanks bro finally I got my working phinr back?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source ?
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,,????? and my phone is on my hand in working condition with stock rom ? I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source) ?????????
Click to expand...
Click to collapse
CMPATIL said:
Thanks bro finally I got my working phinr back
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,, and my phone is on my hand in working condition with stock rom I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source)
---------- Post added at 12:56 PM ---------- Previous post was at 12:46 PM ----------
Click to expand...
Click to collapse
Great...this happened to me once and turned out my windows didn't have proper drivers installed. Glad your phone is back to normal. Just keep it that way.
Good morning bro thanks???????????
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
8 don't know how to attach screenshot here
---------- Post added at 02:50 AM ---------- Previous post was at 02:48 AM ----------
CMPATIL said:
Good morning bro thanks???????????
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
i don't know how to attach screenshot here
Click to expand...
Click to collapse
how to attach photo herebro 8 wanna attach screenshot here for helping other too ?
CMPATIL said:
Good morning bro thanks
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
8 don't know how to attach screenshot here
---------- Post added at 02:50 AM ---------- Previous post was at 02:48 AM ----------
how to attach photo herebro 8 wanna attach screenshot here for helping other too
Click to expand...
Click to collapse
See in the screen shot...this is the option for attaching a screen shot.
I got it now bro...actually I was...using my phone that's why I don't know......thank you bro for helping me every time:highfive::highfive::highfive::highfive:
[HELP]
I flashed this ROM on my phone, it does work.
But, when I go in CWM Recovery and format system, data, cache, etc. then flash this ROM, my phone gets stuck at the Sony logo screen.
Got any ideas why?
And, where can I get the stock ROM (which includes everything obviously, it must be more than 1 GB I guess)
Here is link bro it is( Indian ftf firmware)for Sony xperia E3 Dual[D2212] https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
---------- Post added at 05:30 AM ---------- Previous post was at 05:23 AM ----------
You just need to flash boot.img in fastboot mode first to get yours working cwm recovery again, then you can flash this rom bro,I will attach working boot_D2212.img for you with cwm recovey,..
CMPATIL said:
Here is link bro it is( Indian ftf firmware)for Sony xperia E3 Dual[D2212] https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
---------- Post added at 05:30 AM ---------- Previous post was at 05:23 AM ----------
You just need to flash boot.img in fastboot mode first to get yours working cwm recovery again, then you can flash this rom bro,I will attach working boot_D2212.img for you with cwm recovey,..
Click to expand...
Click to collapse
This link is from first page (OPs first page link post)
Already tried this, doesn't solve my problem but nvm.
It works for me bro,that's why I am sure about this firmware, you have downloaded D2212 boot img file first from net and then flash it,then you can get your cwm recovery back,and after that only you can flash this this rom,
My net slow now to can't attach d2212 boot imag flie here, may ne next time bro,the size of boot img is 15,326kb and 15326kb
CMPATIL said:
My net slow now to can't attach d2212 boot imag flie here, may ne next time bro,the size of boot img is 15,326kb and 15326kb
Click to expand...
Click to collapse
That doesn't make sense really.
As long as we can get to fastboot mode and necessary drivers are installed, we can flash ROMs via fastboot.
And, if we can get to flash mode and drivers are installed then we can flash ROMs via flashmode.
Flashing boot.img only gets us to CWM Recovery.
But, I'll do as you said and post back
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
kuky6789 said:
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
Click to expand...
Click to collapse
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
so u can not go in download mode?
asadnow2k said:
so u can not go in download mode?
Click to expand...
Click to collapse
I can get into download mode yes, but not into recovery?
yasteellutch said:
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
Click to expand...
Click to collapse
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
kuky6789 said:
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
Click to expand...
Click to collapse
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
yasteellutch said:
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
Click to expand...
Click to collapse
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
kuky6789 said:
I can get into download mode yes, but not into recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24459283995310257
flash with this firmware and post results.
kuky6789 said:
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
Click to expand...
Click to collapse
Np
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
yasteellutch said:
Np
Click to expand...
Click to collapse
Be careful next time