Related
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
bweN diorD said:
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
Click to expand...
Click to collapse
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
ajh305 said:
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
Click to expand...
Click to collapse
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
bjoostema said:
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
Click to expand...
Click to collapse
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
EDIT: I tried another 4.3 rom and booted it up. Set some things up then updated su binaries and restarted and let it sit there at the unlocked bootloader warning for 15 minutes with no changes.
bweN diorD said:
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
Click to expand...
Click to collapse
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
ajh305 said:
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
Click to expand...
Click to collapse
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
bjoostema said:
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
Click to expand...
Click to collapse
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
ajh305 said:
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
bjoostema said:
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
Click to expand...
Click to collapse
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
ajh305 said:
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
Click to expand...
Click to collapse
Awesome man! I'm glad it booted up for you welcome to the 4.3 side!
ajh305 said:
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
Click to expand...
Click to collapse
glad you got it fixed but i have to ask, in the sequence above why are you restoring a backup? you should be going right from stock to 4.3. also, some people have issues with twrp and 4.3, thats why i suggested cwm.
I'm not sure why I restored the backup. I didn't think coming from stock would work for some reason.
Sent from my XT926 using xda app-developers app
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
sgtslaughter64 said:
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
Click to expand...
Click to collapse
This was the only thing that worked for me. You could maybe try updating to the most current recovery instead of the one listed.
the only 2 issues i have seen to cause this problem are covered in the post a few below, and fixed it every time. my only suggestion would be to install cwm after rooting, then reboot, then continue with the steps. just my preference, it may not matter.
So my cousin had the this tablet she hadn't us for a while and she asked to to fix it up. Root it put some apps on it blah blah blah. So i rooted it using this: http://forum.xda-developers.com/showthread.php?t=1681155/
Everything was fine and it went smoothly, I had root access, TWRP recovery that it came with and it was working fine.
I wanted to put a ROM on it for my cousin to match her phone so I found this: http://forum.xda-developers.com/showthread.php?t=2584265
So, I flashed the Rom and it was fine. Then I flashed the Gapps and it said that the system partion didn't have enough space.
Here is where I screwed up (I think). TWRP said that I lost root access and i had to fix it BUT i had to swipe a bar at the bottom to fix it. My dumbass pressed the button in the middle of the screen which was to ignore it. I didn't see what i was doing and i messed up
So I lost root or something and when i turn on the device and try to boot into recovery by holding the Power + Vol Down keys it does not work!
Now I have a tablet with android 4.4.3, no Gapps, no root, no recovery. I have tried to factory reset it but the one in settings do not work.
I'm stuck and I need help from someone smarter. Thank you for anything.
Id start again, sounds like something in recovery got messed up if it thinks the system partition is not big enough for gapps
Flash TWRP with Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012
Download ROM & Gapps to MicroSD Card
I suggest KatKiss #29 & Gapps from this link
http://forum.xda-developers.com/showthread.php?t=2592890
Factory reset & Wipe everything except External Storage from TWRP
Flash ROM
Flash Gapps
Wipe Cache & Dalvik Cache
Reboot
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
ok so i installed the drivers it easyflasher was asking for and now it asks whether the device is SBK1 or SBK2, how do i find out whether the device is B70 or above... I feel dumb again... It also asks if its in APX mode... i need help again
ok i figured out the easyflasher and i get the recovery but, when im done flashing all the files and boot the device it says that i have to repair root, like before and even if i say to do so i lose the recovery every time meaning i have to go and put the recovery back onto it and do everything again.....
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
RoughRunner said:
alrighty so ive got the recovery to stick, and i got the KitKatKiss rom which is actually really nice, however i don't have root, i keep trying to flash the supersu file but it does not work. thanks for everything already. it would be nice to have it rooted.......
Click to expand...
Click to collapse
QUOTE:
Nothing more nothing less is needed, so if it doesn't work by doing the above, there are other problems
--
As Tim says, and as I said, if you had just followed my instructions and not tried adding your own section of the process, you would have had no problems
timduru said:
KatKiss is already rooted by default, you should not flash an additionnal supersu zip.
Just Flash the rom then gapps from the KatKiss thread
wipe cache + dalvik-cache
then reboot.
If you're coming from another rom version, a full wipe / factory reset is recommended before flashing too.
Click to expand...
Click to collapse
ok thanks theres the problem all fixed thanks
I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus
Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom
Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk
Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).
Very exited, good job
so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)
coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk
unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.
Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!
Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
wahlmat said:
Hi!
A while back I had some issues with the phone, it was when I was supposed to boot it, it always took 2 tries. It always got stuck, then had to long press the lock key to hard reboot it, then it worked fine. This prevented me from doing a factory reset (in hope to fix (what I later found out was) a media rescan etc). Tried to root it, something happened and it wouldn't boot anymore. Yiti yata and the phone wouldn't boot. Finally I got it back to life with some guide on here and I used whatever 4.4.4 I downloaded.
The software wouldn't find any "normal" update phone updates, so I figured I would try Resurrection Remix 7.1.x (.2 I think it was). At first I got just that it failed with some 2.x twrp version. Updated to TWRP 3.1.x.x (3.1.1.0 if I guess). Now I got to know that it was a TZ error (ERROR 7) from TWRP. This happened to my "RR-N-v5.8.3-20170718-bacon-Official.zip" file. I managed to get around it by doing this: https://forum.xda-developers.com/showthread.php?t=2522762. So I could get this installed, sort of I think. The problem now was that it would show the very first oneplus boot screen for around 20 ish seconds, before it would reboot in a boot loop.
So I tried to install some other CM Lineage Os nightly thing (they said install that and then RR), but that didn't work either. This post was the one I donwloaded from (install this first, then RR should work).
I tried doing this both on TWRP 2.8.6.0 and 3.1.1.0 since I saw some post about the modem not being right from versions newer than 2.8.6.0.
Looking around a bit more I saw in some post someone talking about firmware..? Does this matter anything, also how is this different from the recovery or ROM? (new to this stuff)
In short, last working version of Android I had on there was 4.4.4 (think I followed this post). Using a Mac currently and have no problem with flashing, entering fastboot or recovery.
My procedure when I tried to install RR was:
Install the TWRP 3.1.1.0 or 2.8.6.0 (since I did it several times).
Wipe everything (Have nothing of value on the phone) cache, system, internal storage, dalvik and data. Also did a factory reset (from TWRP) before if that matters.
Copied RR and Gapps 7.1 ARM (not arm64) over.
Installed RR, wiped cache/dalvik. (or linear/cm (post above^^) when I tried that)
Installed Gapps, wiped cache/dalvik.
Boot loop.
Also tried with/without emptying cache/dalvik also chose to install both zips at once.
So can anyone clue in how I can proceed to get RR 7.1 onto my OPO? Any help is very much appreciated
I'm sorry if this wasn't the best post. Have an immense headache at the moment
Click to expand...
Click to collapse
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(https://dl.twrp.me/bacon/).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware: https://drive.google.com/file/d/0BxysuRdzsJeWeW9JbTNwaUJKb1E/view?usp=drivesdk
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(opengapps.org)(optional).
Reboot.It should boot fine now.
Good luck!
Mr.Ak said:
Calm down.
You're right about that firmware thing,that is the one causing issue when you're trying to flash RR 5.8.3 over KitKat.
This is because the firmware that kitkat comes with,is old and don't support newer android versions,that's because it is made for KitKat only.
Always use latest Twrp(Can't post links withing 10 posts apparently...).
Make sure you don't edit any zip like what you did with the Rom zip earlier(devs don't post non-working zips),I'm sure you've a backup of your non-edited zip,if not,re-download the zip.
Now boot into latest twrp,wipe everything except internal storage.
Firmware:
Flash the above zip,then without wiping anything flash rom zip(unedited) then flash google apps package(Can't post links withing 10 posts apparently...)(optional).
Reboot.It should boot fine now.
Good luck!
Click to expand...
Click to collapse
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
wahlmat said:
Thank you so much! Got it working on 1st try with what you provided! Seems like the firmware thing was the bad guy in this scenario. A little interest, what specifically is the firmware in this case? Either way, rocking RR now and I'm really grateful
Click to expand...
Click to collapse
I'm glad you got it up and running.
Here are some FAQs:
What is a Firmware? What is Modem?
- Firmware is the whole package of proprietary partitions of your device, modem itself is a NON-HLOS file responsible for your device's communications over Wi-Fi, Mobile Networks and other such stuff.
So what is the difference between firmware and ROM then?
- Firmware is the responsible partition for IMEIs, the modemst partitions hold your IMEI, persist holds your Mac addresses etc.
ROM is only a combination​ of system.img and boot.img (kernel)
What to restore if I loose my IMEI?
- Both the modemst partitions (IMP: considering you took a backup of them before)
What is the default firmware? (default= firmware which comes with the latest CM/ LineageOS 14.1 weeklies)
- c6-00241
Thanks a lot, once again
Help!
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
HisMuse said:
I'm not sure of all the specifics on my oneplus one but I accidentally updated the wrong update from my nightly bacon.. it now is stuck in Boot Loop I can get to the fastboot screen (it gets stuck there too) and I can get to the recovery, etc (but it is not the usual screen with all the folders (it was rooted).. it is now just four options in Cyanogenmod recovery.. none work. I do not want to lose my data :crying: .. Sadly my techy is not available to save me! Please help this untechy Cali Girl! I've googled and researched and its still like a foreign language.. Thank you!!
Click to expand...
Click to collapse
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
wahlmat said:
I am not 100% sure, but I would say, boot into fastboot, flash something like TWRP recovery, then you will be able to access the device files from the recovery. Just reflashing the boot shouldn't mess up anything as far as I am concerned. After that (when you've grabbed all the files you want), flash the newest firmware the guy linked above and install your latest 7.0 ROM
Click to expand...
Click to collapse
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
HisMuse said:
I can get phone to fastboot but it just stays on the screen that says fastboot.. do I need a computer?
Click to expand...
Click to collapse
Yes you do. You need that + some software. Check out some "install custom recovery oneplus one" guides, you should be able to find something. Are you on Mac or Windows?
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
HisMuse said:
Yes I'm on Windows 10.. I tried removing battery overnight as well .. its not boiling hot anymore but still stuck in bootloop.
Click to expand...
Click to collapse
Download the Samsung ADB driver or whatever it was called, then flash a new recovery for it. There are multiple guides for doing that. After that you should be able to transfer your files to your pc while being in recovery mode
Hello everyone,
I don't know much about partitions but I know something is not right with mine
So, A few days ago my phone got bricked because I flashed crDroid rom. (I did something wrong)
So, after a lot of research, I found an solution to unbrick my phone. So it worked, I booted into software again and I was free to use.
So later, I decided to install an custom rom again (Havoc OS). I installed the rom but after I clean flashed the rom, I got stuck on booting logo.
So, I thought lets see what partition B does. So I booted into partition B and I got stuck on the logo of TWRP. Not sure why.
I really wanna know why this happend and how to fix my device.
(Btw, now my phone is working again and I am on stock os with rooted using Magisk 16,7.)
But just wanna know what I did wrong
I used the instruction in this thread: https://forum.xda-developers.com/oneplus-6/development/enchilada-romcrdroid-t3827070. And after I did that it got bricked.
I hope anyone knows what happend and how to fix my partition!
Friendly regards,
Crewz
Hi, why you get stuck and what not is because you simply do not follow the instructions 100%
After rom install and twrp install did you reboot? When you reboot at that point it will change partition.
If you get stuck on boot again, try reflash rom (without wipes), flash twrp, reboot to recovery, flash gapps and start the device. Apply root after setup this time just to be sure. Another thing could also be magisk, some roms require a later magisk version. But like I said, root after setup just to be sure where the issue is . Happy flashing mate!
whizeguy said:
Hi, why you get stuck and what not is because you simply do not follow the instructions 100%
After rom install and twrp install did you reboot? When you reboot at that point it will change partition.
If you get stuck on boot again, try reflash rom (without wipes), flash twrp, reboot to recovery, flash gapps and start the device. Apply root after setup this time just to be sure. Another thing could also be magisk, some roms require a later magisk version. But like I said, root after setup just to be sure where the issue is . Happy flashing mate!
Click to expand...
Click to collapse
I did the exact steps as in the thread.
ItsCrewz said:
I did the exact steps as in the thread.
Click to expand...
Click to collapse
If you're booted up and stable there's nothing wrong with your partitions.
What version of twrp are you using?
iElvis said:
If you're booted up and stable there's nothing wrong with your partitions.
What version of twrp are you using?
Click to expand...
Click to collapse
The newest one.
Look when I boot into TWRP and switch to partition B. I am stuck at logo of twrp
ItsCrewz said:
The newest one.
Look when I boot into TWRP and switch to partition B. I am stuck at logo of twrp
Click to expand...
Click to collapse
Which version? There are multiple "newest" ones.
Just because you have two slots doesn't mean both are bootable. The intent of the A/B arrangement is to allow seamless updates, not create a dual-boot phone. The inactive slot is often not bootable or will boot up with things broken. It's inactive because it's not suppose to be booted.
Switching slots manually is rarely necessary anyway. Why do you need to do it?
iElvis said:
Which version? There are multiple "newest" ones.
Just because you have two slots doesn't mean both are bootable. The intent of the A/B arrangement is to allow seamless updates, not create a dual-boot phone. The inactive slot is often not bootable or will boot up with things broken. It's inactive because it's not suppose to be booted.
Switching slots manually is rarely necessary anyway. Why do you need to do it?
Click to expand...
Click to collapse
Yes I know what it means. But it isn't normal that it boots into twrp and get stuck on the logo