Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
bweN diorD said:
you tried 6.0.3.5 cwm also?
i had the same problem and this was the only one i could get to work.
Click to expand...
Click to collapse
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
ajh305 said:
Ya i tried every cwm including 6.0.3.6 and twrp 2.0.6.1
Click to expand...
Click to collapse
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
ajh305 said:
Every 4.3 rom I install after the first reboot it hangs at unlocked bootlaoder screen. I have tried every recovery out there but everytime I have to fastboot to be able to restore a 4.2.2 rom and get it to boot. Does anyone know how to fix this because it is very frustrating. I wipe everything when I install to. I follow the standard procedure and I am not new to rooting or flashing.
Click to expand...
Click to collapse
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
bjoostema said:
keep in mind the second boot on 4.3 roms seems to take a while, how long is it hanging on the boot screen? I remember the first 4.3 I flashed hung for about 5-8 minutes before it booted up. it seems to be the second one that hangs consistently for me, but it does always boot. All following reboots after the 2nd are normal with no hangs.
Click to expand...
Click to collapse
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
EDIT: I tried another 4.3 rom and booted it up. Set some things up then updated su binaries and restarted and let it sit there at the unlocked bootloader warning for 15 minutes with no changes.
bweN diorD said:
not sure if it will help but this is the exact process i used:
-rts using matts utility found here http://batakang.com/dr_utility.php
-put stock recovery back on using the above utility
-root with the above utility and protect with voodoo
-take the ota to get the latest baseband back (will likely fail but still update the bb)
-restore root
-install cwm 6.0.3.5 from this utility http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
-flash your 4.3 rom of choice
-profit (hopefully lol)
Click to expand...
Click to collapse
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
ajh305 said:
I think I have waited for about 10 minutes before. I'll try again and see if it does actually boot. Does your hang on the bootloader unlocked screen or the boot animation screen?
Click to expand...
Click to collapse
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
bjoostema said:
Yeah, mine hangs at the bl unlocked screen on that second boot, though I flashed a different logo to get rid of that annoying message 10 minutes seems a bit excessive but not unheard of-longest I clocked was around 8. Does yours ever make it to the boot animation? If so, it should go into a full boot eventually. I think the hang has something to do with the rom building cache on that second boot Also, whichever 4.3 your using, I would make sure it's a more recent release as they have come a very far since the early releases which hung for longer periods of time. I'm currently running pa rc2 by cj and it went smoothly using cwm 6.0.3.2.
Click to expand...
Click to collapse
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
ajh305 said:
It never reaches the boot animation just sits at that screen. I have tried several 4.3 roms within the last few days so they are the newest versions I can find. Could I clear the cache to get it to boot?
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
bjoostema said:
http://www.droidrzr.com/index.php/topic/27682-having-issues-with-43-roms-is-it-me/ check out the last post on the page in that link. It seems to have worked for that guy. If you don't mind, try that and let me know if it works. In the meantime, I'm going to try and find some more solutions. I'm assuming his method worked, as he hasn't posted back.
Click to expand...
Click to collapse
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
ajh305 said:
By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot
Click to expand...
Click to collapse
Awesome man! I'm glad it booted up for you welcome to the 4.3 side!
ajh305 said:
I did actually restore it back to completely stock, recovery and everything. I downloaded the OTA after rooting and using voodoo. The update failed but I installed cwm 6.0.3.6 and then restored my backup. Then I flashed twrp 2.0.6.1 to try that and flashed a 4.3 rom and same issue came up.
Click to expand...
Click to collapse
glad you got it fixed but i have to ask, in the sequence above why are you restoring a backup? you should be going right from stock to 4.3. also, some people have issues with twrp and 4.3, thats why i suggested cwm.
I'm not sure why I restored the backup. I didn't think coming from stock would work for some reason.
Sent from my XT926 using xda app-developers app
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
sgtslaughter64 said:
I am having the same problem. I have followed the steps but still no joy . Any thoughts?
Click to expand...
Click to collapse
This was the only thing that worked for me. You could maybe try updating to the most current recovery instead of the one listed.
the only 2 issues i have seen to cause this problem are covered in the post a few below, and fixed it every time. my only suggestion would be to install cwm after rooting, then reboot, then continue with the steps. just my preference, it may not matter.
Related
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!
elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.
Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.
Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?
famac! said:
Flashed several ROMS in my life and have not always wiped all data. Mainly i do dalvik and cache. My phones have always work. Now i have a Razr HD with an unlocked BL with TWRP loaded. I cant seem to get past the initial bootup screen no matter what ROM i flash. What am i missing here guys? Do i need to check the "factory reset" in TWRP along with Dalvik, system and cache?
Click to expand...
Click to collapse
answered here http://forum.xda-developers.com/showthread.php?t=2465695
bweN diorD said:
answered here http://forum.xda-developers.com/showthread.php?t=2465695
Click to expand...
Click to collapse
Not really. The majority of ROMS in question have been 4.2.2 based....
famac! said:
Not really. The majority of ROMS in question have been 4.2.2 based....
Click to expand...
Click to collapse
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"
bweN diorD said:
quote from post 11
"By golly that worked! It booted up fast as well. It must lie with the formatting your internal storage before flashing the 4.3 rom. I tried something similiar to this but I was already on a 4.3 rom that wouldn't boot and I formatted the sd card then tried flashing it again and it booted again for the first time but wouldn't the second. So if your having trouble do this:
Restored stock 4.1.2 using Matt's utility
Rooted with Matt's utility
Put 4.3 rom and GAPPS on external SD
Fastboot flash CWM 6.0.3.5 (or install via Matt's utility if you like)
Wipe data/factory reset
Wipe Cache/Dalvik
Go to mounts/storage and format /data and /data/media (/sdcard) **Back up anything in your internal SD you want to keep before doing this!**
Flash 4.3 rom
Wipe Cache/dalvik
Flash GAPPS
Wipe Cache/dalvik
Boot up and setup rom
Reboot"
Click to expand...
Click to collapse
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.
famac! said:
Please explain this further to me. My problem is with 4.2.2 ROMS. The fix above is for folks having issues with 4.3 ROMS. Are you suggesting that doing this will also fix my 4.2.2 problems? This is also CWM while i run TWRP. I did a quick look and the two are setup a little difference. I played around with those highlighted instructions and almost accidentally wiped my only backup of my previous state. I actually thought i was toast but somehow i reloaded and went back to my old backup state.
Click to expand...
Click to collapse
i could be wrong, but in my opinion having the exact same issue even though its a different version, one of the 2 fixes in that thread should work.
the first fix likely doesn't directly apply although i suggest you ensure you have the latest version of your recovery of choice found here http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar
second fix (backup ALL data you don't want to loose first as noted above), then do a full wipe as listed above, not just a fdr that doesn't wipe everything on the internal card.
the problem at this point is, you are assuming it wont work because of version differences, i am assuming it will. until you try it, i don't see any point in exploring other options, if there are any.
Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.
RikRong said:
Dirty flashing when you go to different ROMs is generally not a good idea. Even on 4.2.2, it leaves residual data behind. There's a reason that the devs talk about doing complete wipes in their ROM threads, and there's a reason that they tell you not to talk about bugs unless you use their install directions.
Click to expand...
Click to collapse
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.
famac! said:
Yeah, i am straight now. Did a full wipe and sailed right past the startup animation. Thanks all.
Click to expand...
Click to collapse
Nice! Glad to see you got it working.
Hi There,
So, I have a Samsung Galax S2 Telus SGH-T989D phone and I decided to root it using the 4.4 KitKat and it went well and everything was great.
However, afterwards to resolve some other issues I was having I decided to make the mistake of loading the gapps which was for another
package into my phone and that messed everything up!
So, I have been struggling with the phone and first it wouldn't let me install another ROM from recovery and kept on giving me error 7 and 6
But, I fixed that and now I can install any ROM from the recovery or Odin (download mode) without any errors.
However:
The phone vibrates , brings up the galaxy logo and then the Koodo logo appears and a bar fills up quickly under it but it never goes away!!!
Phone freezes there and that's that!! Even after taking out the battery I noticed the logo was still stuck on the screen where as normally
it goes blank!!
So, at this point I am not sure what else to do! This is annoying and I'm tired of experimenting. I went through some XDA foroums here and
tried the Super Vipe (taking out the battery has been tried, factory reset and wiping the cache all have been tried)
So, please please please help me out here. I used to have a MyTouch4G which I rooted with CyanogenMod back in the day and it's the most
stable thing ever and all I wanted to do was to perform the same thing on my Galaxy S2 and boom not this time!!!
Awaiting your response and thanks in advance
King-2012 said:
Hi There,
So, I have a Samsung Galax S2 Telus SGH-T989D phone and I decided to root it using the 4.4 KitKat and it went well and everything was great.
However, afterwards to resolve some other issues I was having I decided to make the mistake of loading the gapps which was for another
package into my phone and that messed everything up!
So, I have been struggling with the phone and first it wouldn't let me install another ROM from recovery and kept on giving me error 7 and 6
But, I fixed that and now I can install any ROM from the recovery or Odin (download mode) without any errors.
However:
The phone vibrates , brings up the galaxy logo and then the Koodo logo appears and a bar fills up quickly under it but it never goes away!!!
Phone freezes there and that's that!! Even after taking out the battery I noticed the logo was still stuck on the screen where as normally
it goes blank!!
So, at this point I am not sure what else to do! This is annoying and I'm tired of experimenting. I went through some XDA foroums here and
tried the Super Vipe (taking out the battery has been tried, factory reset and wiping the cache all have been tried)
So, please please please help me out here. I used to have a MyTouch4G which I rooted with CyanogenMod back in the day and it's the most
stable thing ever and all I wanted to do was to perform the same thing on my Galaxy S2 and boom not this time!!!
Awaiting your response and thanks in advance
Click to expand...
Click to collapse
Clean solution: Flash stock firmware via Odin or install custom rom via recovery
LS.xD said:
Clean solution: Flash stock firmware via Odin or install custom rom via recovery
Click to expand...
Click to collapse
Thank you for your reply. However, as I've mentioned before, I've already tried those (from ODIN and through RECOVERY) with multiple different
ROMS and it's not doing anything which is why I am posting this here.
King-2012 said:
Thank you for your reply. However, as I've mentioned before, I've already tried those (from ODIN and through RECOVERY) with multiple different
ROMS and it's not doing anything which is why I am posting this here.
Click to expand...
Click to collapse
Did you perform a FULL wipe? Custom recovery -> format ALL partitions except EFS?
I have tried the Super Vipe off the SD card through the recovery mode and also from recovery I've tried the wipe cache,
factory reset and wipe cache partitions.
I am not sure about "format ALL partitions except EFS" nor am I aware of the procedure.
How would I perform that?
Have you installed a working custom recovery?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
LS.xD said:
Have you installed a working custom recovery?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
Yes I'm able to successfully install recovery-clockwork-5.0.2.7-hercules or CWM_Root_Superuser_3.1.3_Busybox_1.20.2
from the recovery without any errors (same if rooted through Odin)
If there's a specific ROM you are thinking about please let me know and I will be more than glad to give it a shot.
You really should use a newer recovery version. But for now go to mounts and storage and format all partitions except EFS. Then try flashing stock firmware via Odin
Here you can get the latest recovery for your device --> TWRP for hercules
LS.xD said:
You really should use a newer recovery version. But for now go to mounts and storage and format all partitions except EFS. Then try flashing stock firmware via Odin
Here you can get the latest recovery for your device --> TWRP for hercules
Click to expand...
Click to collapse
Under mounts and storage and format all partitions except EFS > Don't even see ESF there to begin with..
Do you have a working link for downloading the stock firmware? I have downloaded few and none of them even let me install them (status 0 error)
Any ideas?
Odin is already being used v3.0.7
Format System Data Cache dalvik. Realy... Then flash stock firmware using ODIN!
Sent from my beloved HTC One S using (most time buggy) Tapatalk
LS.xD said:
Format System Data Cache dalvik. Realy... Then flash stock firmware using ODIN!
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I was able to finally bring it up!!
Basically I looked for a stock firmware for T-Mobile and after formatting the phones multiple times I tried this ROM
using ODIN and it got rid of the Koodo logo and replaced it with a T-Mobile logo and then it BOOM loaded to start screen finally!! :laugh:
I was about to hammer the phone. So, trust me I was very happy to see it work.
Thank you for your quick and helpful response :good:
Cheers :victory:
Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:
TheHelplessGuy said:
Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:
Click to expand...
Click to collapse
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989
The same
jrc2 said:
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?
TheHelplessGuy said:
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?
Click to expand...
Click to collapse
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989
jrc2 said:
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989
Click to expand...
Click to collapse
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?
TheHelplessGuy said:
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?
Click to expand...
Click to collapse
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989
jrc2 said:
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989
Click to expand...
Click to collapse
The one with Android 4.1 my guess is Nature UX
TheHelplessGuy said:
The one with Android 4.1 my guess is Nature UX
Click to expand...
Click to collapse
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989
jrc2 said:
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989
Click to expand...
Click to collapse
What do you suggest ?
TheHelplessGuy said:
What do you suggest ?
Click to expand...
Click to collapse
I don't know, sadly. Maybe someone else will know and we'll both learn something.
Sent from my SGH-T989
Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck
150208 said:
Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck
Click to expand...
Click to collapse
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?
TheHelplessGuy said:
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?
Click to expand...
Click to collapse
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:
150208 said:
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:
Click to expand...
Click to collapse
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
TheHelplessGuy said:
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
Click to expand...
Click to collapse
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.
150208 said:
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.
Click to expand...
Click to collapse
re-rooted as you said still the same loading screen , you can give me a link to the part of the forum where I can speak with developers as you said few comments ago
I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus
Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom
Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk
Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).
Very exited, good job
so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)
coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk
unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.
Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!