This Stock kernel is Only for N910U 5.1.1 users.
STOCK: Suemax-kernel-v1.1 (new)
Change log :
1) Auto root + Busybox
2) init.d
3) knox disabled from ramdisk + kernel
4) SELUNIX : permissive
5) Enabled CPU Gov : Conservative +Ondemand
6) Build from new kernel dtb from scratch
7) Made from Opensource-N910UXXU1COI2
Requirements : 5.1.1 Bootloader + Modem + 5.1.1 firmware + Any Custom recovery
Suemax-kernel-v1.1 : Download recovery flashable
Suemax-kernel-v1.1 : Download Odin flashable md5
Kernel source : Github
Previous Versions
STOCK: Suemax-kernel-v1
Change log :
1) Auto root + Busybox
2) init.d
3) knox disabled from ramdisk + kernel
4) SELUNIX : permissive
5) Enabled CPU Gov : Conservative +Ondemand
recovery flashable .zip Download : https://www.dropbox.com/s/pi1m6ty78ajno0v/Suemax-kernel_N910U_5.1.1_Autoroot.zip?dl=0
Odin flashable .tar md5 Download : https://www.dropbox.com/s/d5obwbyh1mb2ei6/boot.tar.md5?dl=0 (link Fixed)
Kernel source : Stock N910CXXU1COH4
Read this for My Custom kernel thread for N910C/H/U : http://forum.xda-developers.com/showthread.php?p=63225582
djmax81 said:
This Stock kernel is Only for N910U 5.1.1 users.
Change log :
1) Auto root + Busybox
2) init.d
3) knox disabled from ramdisk + kernel
4) SELUNIX : permissive
Requirements : 5.1.1 Bootloader + Modem + Stock 5.1.1 firmware + Any Custom recovery
Download link : https://www.dropbox.com/s/pi1m6ty78ajno0v/Suemax-kernel_N910U_5.1.1_Autoroot.zip?dl=0
Kernel source : Stock N910CXXU1COH4 (will upload github link soon after my Main kernel thread for N910C +N910H+N910U)
Click to expand...
Click to collapse
Sir are we going to have the pleasure of your kernel in n910c variant in the future or just n910u? Thank you and welcome to the exynos party
Konskl said:
Sir are we going to have the pleasure of your kernel in n910c variant in the future or just n910u? Thank you and welcome to the exynos party
Click to expand...
Click to collapse
For sure.!!!! I own N910H but just tried to help N910U users coz some users were disappointed with delay of 5.1.1 update .But soon will Support N910H/N910C +N910U with my up coming Kernel thread .
Good news! !
tristan_1022 said:
Good news! !
Click to expand...
Click to collapse
Good to see Suemax kernel users from N900 times
So hot
Gà super said:
So hot
Click to expand...
Click to collapse
So hot ????
For me
djmax81 said:
So hot ????
Click to expand...
Click to collapse
Stock rom 5.1 link for me
I think Amplify dont work with wanam xposed ! Damn
truenitos said:
I think Amplify dont work with wanam xposed ! Damn
Click to expand...
Click to collapse
Probably !!! Coz i use Wolson Audio control in my Custom kernel
Here is screenshot from my Current kernel which release Soon !!!
Dont know, seems dont work for anyone ! And Amplify is my number 1 Xposed app ! Dammkt
truenitos said:
Dont know, seems dont work for anyone ! And Amplify is my number 1 Xposed app ! Dammkt
Click to expand...
Click to collapse
Nvr mind .!!! Mate forget Amplify for a while and enjoy 5.1.1 + your favourite Custom rom on ya N910U .
Are you happy now hehe .!!!!Finally
Im happy ! ALOT !
---------- Post added at 02:03 AM ---------- Previous post was at 01:47 AM ----------
I made it work !!! After reading posts everywhere ! There is a workaround to make it work ! Im happy 200%
truenitos said:
Im happy ! ALOT !
---------- Post added at 02:03 AM ---------- Previous post was at 01:47 AM ----------
I made it work !!! After reading posts everywhere ! There is a workaround to make it work ! Im happy 200%
Click to expand...
Click to collapse
Hola, entiendo que el Kernel ya funciona en nuestro Note U??.
Hello, I understand the Kernel longer works in our Note U ??.
Si, en 5.1.1! Para root y demas !
Yes for 5.1.1 , for root and etc
truenitos said:
Si, en 5.1.1! Para root y demas !
Yes for 5.1.1 , for root and etc
Click to expand...
Click to collapse
Truenitos, ¿cómo instalo la sixperience 2.0?. Gracias.
Truenitos, how do I install the sixperience 2.0 ?. Thank you.
Enviado desde mi SM-G925F mediante Tapatalk
@digitos69 ve al post de la SixPerience ! Acabo de poner todo alli !
Go to SixPerience N5 Port Thread ! I put the steps there!
Thank you
I love you
Related
SpaceX Lollipop 5.0.1 - BETA for G906S/L/K available !
Download now: http://choimobile.vn/threads/49119/
Source: http://choimobile.vn/threads/48981/
download link?
Download link is here http://choimobile.vn/threads/project-rom-spacex-lollipop-5-0-1-galaxy-s5-lte-a-g906s-l-k.48981/
Audioboxer said:
Download link is here http://choimobile.vn/threads/project-rom-spacex-lollipop-5-0-1-galaxy-s5-lte-a-g906s-l-k.48981/
Click to expand...
Click to collapse
not released yet
SpaceX Lollipop 5.0.1 - BETA for G906S/L/K available !
Download now: http://choimobile.vn/threads/49119/
Manh_IT said:
SpaceX Lollipop 5.0.1 - BETA for G906S/L/K available !
Download now: http://choimobile.vn/threads/49119/
Click to expand...
Click to collapse
good ,thanks
Manh_IT said:
SpaceX Lollipop 5.0.1 - BETA for G906S/L/K available !
Download now: http://choimobile.vn/threads/49119/
Click to expand...
Click to collapse
Just thought I'd chip in and say this works really well. Rids of all the default bloat.
SpaceX Lollipop 5.0.1 for G906S available ,G906k not available whats the problem
SpaceX Lollipop 5.0.1 for G906S available ,G906k not available whats the problem
now available
nice update, downloading...
can you make CSC file for INU (India)...plz
any release for L?
Please release a version for L.
I'm stuck at Samsung boot screen. Anyone has the same problem?
kennytung said:
I'm stuck at Samsung boot screen. Anyone has the same problem?
Click to expand...
Click to collapse
You have to do a clean install, first stock lollipop > recovery >Space X.Good luck
Thanks. But I just reverted back to stock again. Maybe wait for the next version then.
G906L available!
#1
can you upload bootloader and baseband for g906k so i can directly upgrade to your rom?
S6 rom on g906s/k/l
May I ask if your planning to port s6 rom to s5 prime? I mean the whole rom. Someone from choimobile made a port for note 4 only. I think it's easy for you.
Same
b l h f said:
May I ask if your planning to port s6 rom to s5 prime? I mean the whole rom. Someone from choimobile made a port for note 4 only. I think it's easy for you.
Click to expand...
Click to collapse
Same question
using space X rom from more than a month. its a stable ROM and everything is working fine.
---------- Post added at 06:52 AM ---------- Previous post was at 06:51 AM ----------
no need to, this rom is perfectly fine for me. i think you should Factory reset your phone to avoid bootloop. Same thing happen for me then i factory reset my phone and wolaaaah !
SAMSUNG S5 PRIME (G906 L/S/K)
EVERYTHING IS HERE NOW
STOCK ROMS | Custom ROMS | Recoveries | ROOT | Kernels | Hello Everyone.
I hope everybody is fine and doing well
I am making this thread because many of us couldn't find the best ROMs for our Korean phone. As Samsung S5 Prime (G906) is a Korean Variant, that's why we couldn't find its custom ROM easily. I am not the developer but always love to test new ROM's.
NOTE: All the credits goes to the original developers, Specially Vietnamese developers who are working hard to make out best from our S5 Prime.
What you are going to find in this thread?
>Stock ROMs.
>All working Custom ROMS.
>Recoveries.
>Root.
>Working Xposed.
Stock Lollipop ROMs:
Model name: G906L
Country: Korea (LG UPlus)
Version: Android 5.0.1
Changelist: 4192068
Build date: Wed, 25 Feb 2015 10:48:54 +0000
Product code: LUC
PDA: G906LKLU1BOB8
CSC: G906LLUC1BOB8
Link download: http://www.sammobile.com/firmwares/download/43976/G906LKLU1BOB8_G906LLUC1BOB8_LUC/
Link Fshare: http://www.fshare.vn/file/JPO1QEI2J75U
Link 4share: http://up.4share.vn/f/32010a0602060404 Big thank aachiaa
Update 12-5-2015.
Google
SM-G906S:
Model name: G906S
Country: Korea (SK Telecom)
Version: Android 5.0.1
Changelist: 4192068
Build date: Wed, 25 Feb 2015 10:49:32 +0000
Product code: SKC
PDA: G906SKSU1BOB8
CSC: G906SKSU1BOB8
Link download: http://www.sammobile.com/firmwares/download/43981/G906SKSU1BOB8_G906SSKC1BOB8_SKC/
Link Fshare: http://www.fshare.vn/file/QTPUS69EZH8B
Update:
12-5-2015: .
Link
Update: 12-5-2015
Google
SM-G906K:
Model name: G906K
Country: Korea (KT Corporation)
Version: Android 5.0.1
Changelist: 4192068
Build date: Wed, 25 Feb 2015 10:45:54 +0000
Product code: CI
PDA: G906KKTU1BOB8
CSC: G906KKTC1BOB8
Link download: http://www.sammobile.com/firmwares/download/43983/G906KKTU1BOB8_G906KKTC1BOB8_KTC/
Link Fshare: http://www.fshare.vn/file/2NRMJL16GHQ2
Update 12-5-2015
Google
Flash relevant file via ODIN.
Recoveries:
TWRP:
Links:
Mega Link
Fshare Link
Pass: cmb2015
Philz
Mediafire Philz
Extract this and flash (.tar) TWRP recovery file with ODIN.
Root:
Flash this file using TWRP
Custom ROMS:
Note: All the ROMS given below are without korean apps and fixed SMS issue and other korean stock ROMs issues.
SpaceX ROM:
BY: MANHIT
Download Links.
G906L:
Google
Android File Host
G906S
Google
Android File Host
G906K
Google
Android File Host
Flash using TWRP Rec.
VN-ROM
ROM Edited from (4:13 G906_5.0.1_B3) China by *lelong3010* from Vietnam.
Features:
Dedoxed (Xposed is working on this ROM)
I am using this ROM too
Remember!!!! This ROM is without Kernel, SO Flash Kernel After Flashing ROM.
Link:
Google
Kernel:
Link:
Please flash kernel carefully matched with your phone model, otherwise don't blame on me!!
This ROM has full screen calling so if you want Stock Calling App then flash this after flashing ROM.
Stock Calling App.
Redonmaya ROM:
Its a Backup ROM!!!
Based on G906S so this model does not need to flash kernel after restoring Rom but other models must have to flash Kernels.
Link:
Google
Kernels:
G906L
G906K
Method:
>Download Rom file, unzip the file and copy the folder (ClockworkMod) in Ext. SD card.
> Go into Recovery Mode (Power off: press "power" + "home" + "vol up" ) then select Clean to install a new ROM.
>Choose Backup and Restore -> Restore from / sdcard (or where you put the file) -> select files
- Flash
Then L and K version has to flash kernels given above.
New Rom.
XT-ROM V1 (Made by the VN-ROM developer)
Based on G901 5.0.2
*found it stable*
Links:
Google
Mega
Kernel R7 (LSK):
Link
Kernels:
Lolliwiz kernels
Stock Kernel:
G906L
G906K
Working Xposed
Xposed for TW lollipop is not more a dream now.
For Xposed you need Dedoxed ROM. (The 2nd One/VN-ROM)
Xposed APK + Gravity BOX. (Flash this file first using Recovery)
Then Flash THIS File.
ALL credit goes to the developer who work really very hard to make it work Xposed on TW Lollipop. (Thanks MAN)
That's all for today I will update this thread in future. Hit like if you like this little effort Suggest me if i can do anything better.
Thanks
Stay Blessed
Nice. It's great to have all the information in one place:good:
---------- Post added at 10:12 PM ---------- Previous post was at 10:08 PM ----------
Nice. It's great to have all the information in one place:good:
Maybe add link to CM & Dokdo ROM as well (if you have permission).
thanxxx
thanks for posting this. this is just what we need
all info in one place for our "S5 G906S/K/L fones
ps u have missed a few ROMS.
like" CM12 & 12.1 " + "Dokdo ROM" plus theres some others i have missed out, which i wil add later on sometime :
heres the link for anyone who has not got it :0 http://fsrv1.sayanogen.com/S5LTEAX3/NIGHTLY/
zac
Can you add the link to the original (Rom) threads?
and add more Roms an Kernels too
But thanks for your work
edit:
you can add Blisspop and Boeffla Kernel
please tell me which rom i have missed?
phoberus said:
Can you add the link to the original (Rom) threads?
and add more Roms an Kernels too
But thanks for your work
edit:
you can add Blissrom and Boeffla Kernel
Click to expand...
Click to collapse
please give me the link of blissrom and Boeffla kernel? did you tried boeffla kernel on G906?
tookie015 said:
Nice. It's great to have all the information in one place:good:
---------- Post added at 10:12 PM ---------- Previous post was at 10:08 PM ----------
Nice. It's great to have all the information in one place:good:
Maybe add link to CM & Dokdo ROM as well (if you have permission).
Click to expand...
Click to collapse
give me the link.
xxaqib said:
give me the link.
Click to expand...
Click to collapse
Boeffla Kernel:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062078
Blisspop:
http://forum.xda-developers.com/galaxy-s5/unified-development/rom-wip-27-9-14-t2889474
phoberus said:
Boeffla Kernel:
http://forum.xda-developers.com/gal...ernel-boeffla-kernel-1-0-beta1-23-03-t3062078
Blisspop:
http://forum.xda-developers.com/galaxy-s5/unified-development/rom-wip-27-9-14-t2889474
Click to expand...
Click to collapse
sorry to say... this thread is totally about G906 (s5 prime) not the simple S5 version
Hi, I have a G906L, which rom do you recommend?
VN-ROM
weedlucho said:
Hi, I have a G906L, which rom do you recommend?
Click to expand...
Click to collapse
hello, try VN-ROM for sure. just go for it. i have used all of G906 ROMs and found VN-ROM most stable and xposed is working on this rom.
Turkish
thx for your work.
which of these roms contains multi language package including Turkish.
Apperciate your help.
xxaqib said:
hello, try VN-ROM for sure. just go for it. i have used all of G906 ROMs and found VN-ROM most stable and xposed is working on this rom.
Click to expand...
Click to collapse
Thanks! And what's the process for the installation? I'm using de miscom rom (4.4.2)... I'm rooted, and have custom recovery... Full wipe? No wipe? Upgrade first with a stock 5.0?? Please link everything I need... Thanks again!,
Hopefully one of the devs can create a new odexed verion of the latest update so we can use Xposed.
Hi, thank you for this Tried VN-ROM, it's stable and there are many mods inside the rom, i like it. but he dialer screen when calling and when ringing is a little bit ugly, the car's image, the black font....not good, i think that the original one is better.
---------- Post added at 11:54 PM ---------- Previous post was at 11:53 PM ----------
Is there a way get back the original one? I mean the orignal dialer
Audioboxer said:
Hopefully one of the devs can create a new odexed verion of the latest update so we can use Xposed.
Click to expand...
Click to collapse
why dont you use dedoxed ROM i have mentioned above in thread so that you can use xposed
as i am using xposed flawlessly
xxaqib said:
why dont you use dedoxed ROM i have mentioned above in thread so that you can use xposed
as i am using xposed flawlessly
Click to expand...
Click to collapse
Excuse me, but how is the process for the installation of that rom? I have the custom rom from miscom (4.4.2)... What do I need to do first?
weedlucho said:
Thanks! And what's the process for the installation? I'm using de miscom rom (4.4.2)... I'm rooted, and have custom recovery... Full wipe? No wipe? Upgrade first with a stock 5.0?? Please link everything I need... Thanks again!,
Click to expand...
Click to collapse
MAN! i have mentioned every link above
1. Flash 5.0 from ODIN (use stock roms from thread)
2.Flash TWRP via ODIN.
3. full wipe > Flash VN-ROM > Flash Kernel given in thread with VN-ROM box.
4.Reboot.
its soooo simple
xxaqib said:
MAN! i have mentioned every link above
1. Flash 5.0 from ODIN (use stock roms from thread)
2.Flash TWRP via ODIN.
3. full wipe > Flash VN-ROM > Flash Kernel given in thread with VN-ROM box.
4.Reboot.
its soooo simple
Click to expand...
Click to collapse
Sorry, and thanks!!
shabbat said:
Hi, thank you for this Tried VN-ROM, it's stable and there are many mods inside the rom, i like it. but he dialer screen when calling and when ringing is a little bit ugly, the car's image, the black font....not good, i think that the original one is better.
---------- Post added at 11:54 PM ---------- Previous post was at 11:53 PM ----------
Is there a way get back the original one? I mean the orignal dialer
Click to expand...
Click to collapse
YES!!!
i have mentioned in the thread that this rom has full screen calling app if you want to use stock dialer app then flash this.
here is the link> just flash this via recovery and reboot.
LINK STOCK Calling APP
New Pyrana Lenovo YT3-X90L base S200307_170614 6.0.1
Base: YT3-X90L 4G Androïde 6.0.1
. Déodex
. Zipaligne
. Root
. Busybox
. Titanium Root free
. Transparent Weather Clock free
. BlueMail free
. Quick Boot free
. Titanium Root free
. New Pyrana Wallpaper
. Magisk root thanks to @topjohnwu
. All the apk in the days
Screen:
Download Rom Pyrana Tab3 Yoga YT3-X90L TWRP Backup update 07-2017
https://mega.nz/#!c5Ix0Lwa!58zjD5H3AuLzJi0cOBYOmd1ZTu4jZH2zxSrWxcYsea4
Installation:
*** bootloader unlock to ADB***
1- Make a backup above all!
2- Copy the folder TWRP to the card SD or internal storage (extract from my zip)
3- With fastboot lauche twrp-2.8.7.0(6)-x90-data-enabled.img.zip
4- Install backup TWRP 2017-07-12--12-51-33_YT3-X90L_USR_S200307_1706140050_WW17_BP_ROW
5- Reboot . . . .
NB: This backup has neither a recovery nor a boot..
The bootloader will not be give up and the recovery either
You can always restore your backup in case of problems.
Installation under your responsibility..
*** As there is not to bootloader unlock, I have of pass by a backup ***
---------------------------------------------------------------------------------------
OLD ROM:
New Pyrana Lenovo YT3-X90L base S10139_160128
Base: YT3-X90L 4G Androïde 5.1.1
. Déodex
. Zipaligne
. Root
. Busybox
. Titanium Root free
. VLC free
. AccuWeatherTablet free
. New Pyrana Wallpaper
. Settings+ Pyrana
. SuperSU 2.78 thanks to @Chainfire
. All the apk in the days
Screen:
Download Rom Pyrana Tab3 Yoga YT3-X90L: update 04-2017
https://mega.nz/#!Upo3WB7a!HJ81RCWfeuORNQNyxSo-tCILp6VXDrS4cMjw5Imsyfk
Installation:
1- Make a backup above all!
2- Copy the folder TWRP to the card SD (extract from the zip)
3- With fastboot lauche twrp-2.8.7.0(6)-x90-data-enabled.img.zip
4- Install backup 2017-04-11--15-12-09_YT3-X90L_USR_S100139_1601281130_WW24_ROW
5- Reboot . . . .
NB: This backup has neither a recovery nor a boot..
The bootloader will not be give up and the recovery either
You can always restore your backup in case of problems.
Installation under your responsibility..
*** As there is not to bootloader unlock, I have of pass by a backup ***
First! This ROM is stable in beta version? Bugs?
On which version of Android is based? Android 5.1 Lollipop? Thanks you very much!
pickandrew said:
First! This ROM is stable in beta version? Bugs?
On which version of Android is based? Android 5.1 Lollipop? Thanks you very much!
Click to expand...
Click to collapse
Hi,
It is a version 5.1.1 (not of 6 available)
Stable and no met bugs.
Boot is not in this backup, we can always restore a stock
Performances improved with the déodex and zip aligns.
All the app is up to date in 17/10
@+
Alan-B said:
Hi,
It is a version 5.1.1 (not of 6 available)
Stable and no met bugs.
Boot is not in this backup, we can always restore a stock
Performances improved with the déodex and zip aligns.
All the app is up to date in 17/10
@+
Click to expand...
Click to collapse
hi there,
would the twrp recovery included in here also work for the lenovo yoga book?
i'm searching for a way to obtain root.
thanks for your help
Hi,
There are many YOGA TAB 3 PRO versions
My Roma is just for the model YT3-X90L which is LTE 2 Giga of Ram.
Others I do not know
NB: I have make another piece of news), but I wait to see if Lenovo takes out a version 6.x ??
Alan-B said:
NB: I have make another piece of news), but I wait to see if Lenovo takes out a version 6.x ??
Click to expand...
Click to collapse
Hi, i am very interesting about that news
Lenovo is still making version 6.0 but they have good and working Beta version.
Look here: https://forums.lenovo.com/t5/Androi...3-Pro-and-Android-6-update/m-p/3609021#M16671
It could be great if you have Pyrana for Yoga Tab3 pro, there is so many frustrated people.
hegemnon said:
Hi, i am very interesting about that news
Lenovo is still making version 6.0 but they have good and working Beta version.
Look here: https://forums.lenovo.com/t5/Androi...3-Pro-and-Android-6-update/m-p/3609021#M16671
It could be great if you have Pyrana for Yoga Tab3 pro, there is so many frustrated people.
Click to expand...
Click to collapse
Hi,
At present there is just one Stupid man for me model WIFI not the LTE 4G
For the LTE they are not going to be fast!!
NB: Temporarily, as not of Android 6, the link is updated.
Of this day 5.1.1 déodex complete with all the updates.
NB: new to player music and files Manager
@+
Pyrana
Sounds good, I will try. Is there multiwindow mode available on pyrana Rom?
hegemnon said:
Sounds good, I will try. Is there multiwindow mode available on pyrana Rom?
Click to expand...
Click to collapse
Hi,
Yes multiwidow work.
Will this work on yoga tab 3 10.1" Model: ZA0H0064US Thanks
Alan-B said:
New Pyrana Lenovo YT3-X90L base S10139_160128
Base: YT3-X90L 4G Androïde 5.1.1
. Déodex
. Zipaligne
. Root
. Busybox
. Titanium Root free
. VLC free
. AccuWeatherTablet free
. New Pyrana Wallpaper
. Settings+ Pyrana
. SuperSU 2.78 thanks to @Chainfire
. All the apk in the days
Screen:
Download Rom Pyrana Tab3 Yoga YT3-X90L: update 04-2017
https://mega.nz/#!Upo3WB7a!HJ81RCWfeuORNQNyxSo-tCILp6VXDrS4cMjw5Imsyfk
Installation:
1- Make a backup above all!
2- Copy the folder TWRP to the card SD (extract from the zip)
3- With fastboot lauche twrp-2.8.7.0(6)-x90-data-enabled.img.zip
4- Install backup 2017-04-11--15-12-09_YT3-X90L_USR_S100139_1601281130_WW24_ROW
5- Reboot . . . .
NB: This backup has neither a recovery nor a boot..
The bootloader will not be give up and the recovery either
You can always restore your backup in case of problems.
Installation under your responsibility..
*** As there is not to bootloader unlock, I have of pass by a backup ***
Click to expand...
Click to collapse
sdemun said:
Will this work on yoga tab 3 10.1" Model: ZA0H0064US Thanks
Click to expand...
Click to collapse
Hi,
Normally no ... This version is (5.0.1) for the YT3-X90L (LTE) But for a few days there is Android 6.0.1 for this version....
Can Someone point me to instructions to root and ROM/TWRP for yoga tab 3 10.1" Model: ZA0H0064US Thanks
Alan-B said:
Hi,
Normally no ... This version is (5.0.1) for the YT3-X90L (LTE) But for a few days there is Android 6.0.1 for this version....
Click to expand...
Click to collapse
sdemun said:
Can Someone point me to instructions to root and ROM/TWRP for yoga tab 3 10.1" Model: ZA0H0064US Thanks
Click to expand...
Click to collapse
Hi,
Have you tested with Magisk?
Used on version 6.0.1 of the YT3-X90L without problems
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
PS: I will post a custom 6.0.1 YT3-X90L 2Giga LTE, root and deodexed in a few days
I have not I will look into it. Thanks
Alan-B said:
Hi,
Have you tested with Magisk?
Used on version 6.0.1 of the YT3-X90L without problems
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
PS: I will post a custom 6.0.1 YT3-X90L 2Giga LTE, root and deodexed in a few days
Click to expand...
Click to collapse
---------- Post added at 09:28 PM ---------- Previous post was at 09:16 PM ----------
Hi Again. This post says to use a customer recovery to install magisk.. Anyone happen to know how ot put a customer recovery onto the yoga tab 3 10.1" Model: ZA0H0064US
Alan-B said:
Hi,
Have you tested with Magisk?
Used on version 6.0.1 of the YT3-X90L without problems
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
PS: I will post a custom 6.0.1 YT3-X90L 2Giga LTE, root and deodexed in a few days
Click to expand...
Click to collapse
sdemun said:
I have not I will look into it. Thanks
---------- Post added at 09:28 PM ---------- Previous post was at 09:16 PM ----------
Hi Again. This post says to use a customer recovery to install magisk.. Anyone happen to know how ot put a customer recovery onto the yoga tab 3 10.1" Model: ZA0H0064US
Click to expand...
Click to collapse
Re Hi,
It has a Snapdragon processor! I do not know which TWRP is compatible? You must post in question answers
Hi,
New version 6.0.1 optimized and root.Stable and faster.For YT3-X90L LTE (2 giga ram)
Alan-B said:
Hi,
New version 6.0.1 optimized and root.Stable and faster.For YT3-X90L LTE (2 giga ram)
Click to expand...
Click to collapse
Hi Alan, does this rom work on YT3-X90L LTE with 4GB ram?
skiah said:
Hi Alan, does this rom work on YT3-X90L LTE with 4GB ram?
Click to expand...
Click to collapse
Hi,
In my opinion no, it is not the same Intel processor, so not the same files!
And since there is no Lenovo patched bootloader it's risky!
Alan-B said:
Hi,
In my opinion no, it is not the same Intel processor, so not the same files!
And since there is no Lenovo patched bootloader it's risky!
Click to expand...
Click to collapse
ok, Thank you Alan,
Do you think the only way to anable phone call on Yoga Tab3 Pro is a custom Rom?
skiah said:
ok, Thank you Alan,
Do you think the only way to anable phone call on Yoga Tab3 Pro is a custom Rom?
Click to expand...
Click to collapse
Hi,
This tablet has the 4G but can not make a phone call! Lenovo has blocked this feature.
PS: Lenovo is not very present on the forum with this tablet! No developer has made a totally unblocked booteloader! because I do not know how to make a rom to flash in .zip and go through a backup
Hi,
This is a MIUI 8 PORT for Wiko Getaway, based on MIUI 8 for MT6582 (the initial version was shared by VK Group : https://vk.com/ldroms )
original ROMS: http://www.customromlist.com/micromax/a106-unite-2/list-of-all-custom-roms
Disclaimer:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Compatible Devices: Possible works on Wiko Getaway Clones, like:
- Explay Neo
- Qmobile i12
- Myphone Ocean ELITE
- Casper via v5 (maybe)
MIUI 8 Wiko Getaway Status:
limitations (Not Working / Needs Improvements):
? tell me
Backup your IMEI/NVRAM (IMPORTANT):
Backup IMEI/NVRAM from full functional ROM (KK 21 or CM12.1).
The best way (only way for me) to recover IMEI (to get properly GSM) is using "MTK Nvram Tool (Backup & Restore)".
See "[TOOL][AROMA] MTK Nvram Tool (Backup & Restore)" thread here: http://forum.xda-developers.com/showthread.php?t=2594364
You can use others tools to backup & recover your IMEI
Flash Instructions:
Backup your ROM, if you want go back (because next steps clean all your data)
Put the original ROM on external SDCard (see post #2 Downloads & Changelogs)
Put the BOOT image FIX MIUI_8_x.x.x_su_kk4.4.2_WikoGetaway_BOOT_Vx_jasousa.zip on external SDCard (see post #2 Downloads & Changelogs)
Put the BLOBS FIX MIUI_8_x.x.x_su_kk4.4.2_WikoGetaway_BLOBS_Vx_jasousa.zip on external SDCard (see post #2 Downloads & Changelogs)
Flash the new CWM Recovery for MT6582 (https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0). If can't flash this recovery (maybe on getaway clones), try flash PhilZ Touch Recovery for Casper Via V5 (https://yadi.sk/d/662_32KQiDL5T). Download original Getaway KK 21 Scatter file from here: https://www.dropbox.com/sh/sgqpo41v...d/WikoGetaway/MT6582_Android_scatter.txt?dl=0
Full Wipes (use option "Clean to install a New ROM")
Flash origina ROM
Flash BOOT image FIX
Flash BLOBS FIX
Recover your IMEI/NVRAM (with "MTK Nvram Tool" )
Enjoy
Credits:
lenovoved - Ported MIUI 8 to MT6582
Wiko getaway PORT/FIX Contributors:
@jasousa
ROM OS Version: MIUI 8 - KitKat 4.4.2
ROM Kernel: Linux 3.4.x
Created: 2016-11-04
Downloads & Changelogs
MIUI 8 6.12.18 - (23 January 2017), based on "Custom ROMs for Micromax A106 Unite 2"
ROM: Original ROM ldroms_v4.4.2_Vega_6.12.18.zip for Micromax A106 Unite 2: https://yadi.sk/d/DDdw_ND133yPWU (http://www.customromlist.com/micromax/a106-unite-2/list-of-all-custom-roms)
PhilZ Touch Recovery for WikoGetaway (changes by @jasousa): https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0
Ports/Patches/Fixs
BOOT image FIX V01 (and build.prop) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v...u_kk4.4_WikoGetaway_BOOT_V01_jasousa.zip?dl=0
BLOBS FIX V01 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v..._kk4.4_WikoGetaway_BLOBS_V01_jasousa.zip?dl=0
MIUI 8 6.11.10 - (16 November 2016), based on "Custom ROMs for Micromax A106 Unite 2"
ROM: Original ROM ldroms_v4.4.2_vega_6.11.7_www.ldroms.h1n.ru.zip for Micromax A106 Unite 2: https://cloud.mail.ru/public/6B1H/QksrCbowe/ldroms_v4.4.2_vega_6.11.10_www.ldroms.h1n.ru.zip (http://www.customromlist.com/micromax/a106-unite-2/list-of-all-custom-roms)
PhilZ Touch Recovery for WikoGetaway (changes by @jasousa): https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0
Ports/Patches/Fixs
BOOT image FIX V01 (and build.prop) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v...u_kk4.4_WikoGetaway_BOOT_V01_jasousa.zip?dl=0
BLOBS FIX V01 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v..._kk4.4_WikoGetaway_BLOBS_V01_jasousa.zip?dl=0
MIUI 8 6.10.27 - (04 November 2016), based on "Custom ROMs for Micromax A106 Unite 2"
ROM: Original ROM MIUISU_V4.4.2_VEGA_6.10.27_WWW.LDROMS.H1N.RU.ZIP for Micromax A106 Unite 2: https://megadysk.pl/miui8.6.10.27 (http://www.customromlist.com/micromax/a106-unite-2/list-of-all-custom-roms)
PhilZ Touch Recovery for WikoGetaway (changes by @jasousa): https://www.dropbox.com/sh/sgqpo41v...3_RR/PHILZ_recovery_WikoGetawayKK_ok.img?dl=0
Ports/Patches/Fixs
BOOT image FIX V01 (and build.prop) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v...kk4.4.2_WikoGetaway_BOOT_V01_jasousa.zip?dl=0
BLOBS FIX V01 (for wiko Getaway) - changes and tests by @jasousa - Download: https://www.dropbox.com/sh/sgqpo41v...k4.4.2_WikoGetaway_BLOBS_V01_jasousa.zip?dl=0
Screenshots:
soon
Rede
Boas,
Segui todos os passos, mas em relação à rede, não funciona muito bem. A ROM deteta como se tivesse dois card sim, eu estou a usar o meu no sim 1. E nas definições se desativar o Sim 2, o Sim 1 automaticamente deixa de funcionar e não da para fazer chamadas nem mandar mensagens.
Quando coloco em modo voo, e desativo depois o modo voo, a ROM não deteta nenhum Sim, tem de se reiniciar o telemóvel.
E aparece os dois ícones como se tivesse duas redes, uma a detectar rede e outro icon com um "x".
E outra coisa, em relação ao volume, quando o coloco no mínimo para silenciar, ele silencia mas não aparece aquele icon que está sem som.
How to get Xposed for this Rom?
Will try to test as soon as I get my gf phone available.
Obrigado!
Sent from my MI 5 using Tapatalk
soffskeys said:
How to get Xposed for this Rom?
Click to expand...
Click to collapse
Hi,
Follow this link: http://en.miui.com/thread-78894-1-1.html, section "MIUI 6/7/8 ONLY: Android 4.0 - 4.4.4 only".
Works well for me!
But, if you want install WSM tools, be careful... because "FIX: WSM_XPOSED_5.9.25FIX.zip" causes a bootloop. Do not install this fix.
Regards
Can i update to latest version?
Hey Thanks for this amazing post miui v8 6.11.7 is available can i update to it
Aliahmed3129 said:
Hey Thanks for this amazing post miui v8 6.11.7 is available can i update to it
Click to expand...
Click to collapse
I will test.
But you can try with my 6.10.27 fixes. Works if 6.11.7 have no changes on boot.img... I think.
Download ROM 6.11.7 for Vega in the same link list Roms.
Regards
Sent from my Vega/Unite 2 using Tapatalk
Hi, the minimum volume is high , there is somehow a way to make the minimum volume low? (Fix or some Xposed module maybe?)
Thank you
soffskeys said:
Hi, the minimum volume is high , there is somehow a way to make the minimum volume low? (Fix or some Xposed module maybe?)
Thank you
Click to expand...
Click to collapse
Yes, it's true, the minimum volume is very high.
You can change this in Engineer Mode MTK.
To get this options install Mobileuncle Tools, fom google play.. or use/dial this code: *#*#3646633#*#*
Regards
3g and camera problem
jasousa said:
I will test.
But you can try with my 6.10.27 fixes. Works if 6.11.7 have no changes on boot.img... I think.
Download ROM 6.11.7 for Vega in the same link list Roms.
Regards
Thanks. I already installed the latest version its working Fine But there is problem that 3g is working only on sim 1 and also camera is 8mp but my device camera is 13 QMobile Noir i12. Thank you for your Amazing work
Click to expand...
Click to collapse
3G..Fix...
HEY Ali Ahmad.....Flashed 6.10.7 for Qmobilei12.... Only One Bug....2g is working but 3G is not working....Plz Need HELP.....I don't want to Revert back To stock....this Rom Is Amazing.... Hoping for a Helpful Reply
Annas Ahmad00 said:
HEY Ali Ahmad.....Flashed 6.10.7 for Qmobilei12.... Only One Bug....2g is working but 3G is not working....Plz Need HELP.....I don't want to Revert back To stock....this Rom Is Amazing.... Hoping for a Helpful Reply
Click to expand...
Click to collapse
I am already using v6.10.27 with no bugs only 3g not working on 2nd sim . Is your camera is working at 13mp or 8mp?
MIUI 8 6.11.10 - (16 November 2016)
Hi,
PORT MIUI 8 6.11.10, updated on post #2
- News as changelog MIUI 8 6.11.10 (Turn off alarm notifications in the Clock settings; Save alarm automatically; turn on/off Plug in charger sound )
- Solved 3G network.
- Some tweaks
- Camera 8mp (trying put 13mp)
Aliahmed3129 said:
jasousa said:
I will test.
But you can try with my 6.10.27 fixes. Works if 6.11.7 have no changes on boot.img... I think.
Download ROM 6.11.7 for Vega in the same link list Roms.
Regards
Thanks. I already installed the latest version its working Fine But there is problem that 3g is working only on sim 1 and also camera is 8mp but my device camera is 13 QMobile Noir i12. Thank you for your Amazing work
Click to expand...
Click to collapse
Annas Ahmad00 said:
HEY Ali Ahmad.....Flashed 6.10.7 for Qmobilei12.... Only One Bug....2g is working but 3G is not working....Plz Need HELP.....I don't want to Revert back To stock....this Rom Is Amazing.... Hoping for a Helpful Reply
Click to expand...
Click to collapse
Aliahmed3129 said:
I am already using v6.10.27 with no bugs only 3g not working on 2nd sim . Is your camera is working at 13mp or 8mp?
Click to expand...
Click to collapse
3G working on 2nd SIM.
See MIUI 8 6.11.10, on post #2
Click to expand...
Click to collapse
jasousa said:
Aliahmed3129 said:
3G working on 2nd SIM.
See MIUI 8 6.11.10, on post #2
Click to expand...
Click to collapse
Can i update to this version from previous version without clearing data or formatting data?
Click to expand...
Click to collapse
Aliahmed3129 said:
jasousa said:
Can i update to this version from previous version without clearing data or formatting data?
Click to expand...
Click to collapse
Yes, you can.
Not sure if break anything, but I tested and don't find any problem.
I suggest Wipe Cache in recovery.
Regards
Sent from my Vega/Unite 2 using Tapatalk
Click to expand...
Click to collapse
jasousa said:
Aliahmed3129 said:
Yes, you can.
Not sure if break anything, but I tested and don't find any problem.
I suggest Wipe Cache in recovery.
Regards
Click to expand...
Click to collapse
Thanks i already updated to latest version. Thank you for your amazing work
Click to expand...
Click to collapse
Aliahmed3129 said:
jasousa said:
Thanks i already updated to latest version. Thank you for your amazing work
Click to expand...
Click to collapse
Unfortunately whenever i install Xposed my device stuck at boot logo
Click to expand...
Click to collapse
Aliahmed3129 said:
Aliahmed3129 said:
Unfortunately whenever i install Xposed my device stuck at boot logo
Click to expand...
Click to collapse
Do you read post #6? And follow the link?
Dou you avoid FIX step? Because this cause bootloop.
Regards
Click to expand...
Click to collapse
MIUI 8 for Samsung Galaxy Ace 3 GT-S7270
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
remember this rom ported by @uhes :victory: not by me
so say thanks to @uhes
About MIUI
http://en.miui.com/
Features
- Of course, all amazing MIUI features.
- remove stock browser and change it to GELO browser
- remove MIUI camera
What not works?
like an CM13
root
Tell Me If You Find It
Installation Insturaction
- Install a custom recovery with SELinux support
- Download the latest build
- Download GApps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using your custom recovery, its take more time so please wait
- Flash GApps
- Reboot.
- Enjoy!
Download
ROM
MIUI 8
GApps
OpenGApps
Big thanks to:
XDA developers
MIUI
GOOGLE
CM team
ZIM555, jenkins.sandpox.org
nian0114(xda name:jing95916) Dev Samsung Galaxy SIII
mahameru @fb group for all solution
all user Samsung Galaxy ACE3 GT-S7270 Indonesia , and S7270/2 devs
Source Port Rom: http://forum.xda-developers.com/galaxy-s3/development/rom-miui-8-gt-t3496731
Source Base Rom: jenkins.sandpox.org/
If you like it, use it and don't forget to press the "Thanks" button [/center]
XDA:DevDB Information
MIUI 8 M, ROM for the Samsung Galaxy Ace 3
Contributors
andii_nr, andii_nr, uhes
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: MIUI 8
Version Information
Status: Beta
Created 2016-12-03
Last Updated 2016-12-03
Reserved
Screenshot
Reserved
Hello, this ROM is also compatible with the model Galaxy Ace 3 GT-S7272?
pickandrew said:
Hello, this ROM is also compatible with the model Galaxy Ace 3 GT-S7272?
Click to expand...
Click to collapse
Sorry it's not support
Hey, after flash ROM, GApps and reboot system. In setup wizard, after choose the language I've got an FC notification saying the "Settings" proccess has stopped. Is there a way to bypass the setup wizard in the first boot? So I bet this error don't occur...
after install rom gaps do not directly install it let the home screen after the first sign that a new entry twrp again install its gaps
Adakah tutorial cara installnya pake bahasa indo bang?
Thanks
yudiapasayonara said:
Adakah tutorial cara installnya pake bahasa indo bang?
Thanks
Click to expand...
Click to collapse
Tinggal instal om romnya sebelum instal wipe chace n dalvik wipe data wipe system trs instal romnya tunggu sampe selesai instalasinya stlah selesai instal romnya wipe cache n dalvik trs reboot system masuk dulu ke homescreen terus balik lagi ke twrp buat instal gapsnya om itu ja recomended pke twrp 3.0.2 om
Manteb om ROM anda.. tapi agak sedikit kurang smooth di Ace 3 ane tapi dah joss bgt :laugh:!!
roar58 said:
Manteb om ROM anda.. tapi agak sedikit kurang smooth di Ace 3 ane tapi dah joss bgt :laugh:!!
Click to expand...
Click to collapse
Terimakasih seblumnya sudah coba pakai rom ini
Memang agak lag karna basenya cm13 dan rom nya masih versi beta memang belum stabil
uhes said:
after install rom gaps do not directly install it let the home screen after the first sign that a new entry twrp again install its gaps
Click to expand...
Click to collapse
yes bro , first flash the rom , reboot device , finish setup wizard , turn off phone and go to recovery again and just flash gapps and reboot it ... this worked for me
---------- Post added at 04:43 PM ---------- Previous post was at 04:36 PM ----------
Dr.BassPao said:
Hey, after flash ROM, GApps and reboot system. In setup wizard, after choose the language I've got an FC notification saying the "Settings" proccess has stopped. Is there a way to bypass the setup wizard in the first boot? So I bet this error don't occur...
Click to expand...
Click to collapse
yes bro , first flash the rom , reboot device , finish setup wizard , turn off phone and go to recovery again and just flash gapps and reboot it ... this worked for me
Dr.BassPao said:
Hey, after flash ROM, GApps and reboot system. In setup wizard, after choose the language I've got an FC notification saying the "Settings" proccess has stopped. Is there a way to bypass the setup wizard in the first boot? So I bet this error don't occur...
Click to expand...
Click to collapse
Dr.BassPao
for I've got an FC notification saying the "Settings" proccess has stopped already split right please if you want to try a flash via cwm or twrp zip file below
https://drive.google.com/file/d/0BzgSxgahyY6zOEhXOU1ZZVp6RlE/view?usp=drivesdk
mr.ademmi said:
yes bro , first flash the rom , reboot device , finish setup wizard , turn off phone and go to recovery again and just flash gapps and reboot it ... this worked for me
---------- Post added at 04:43 PM ---------- Previous post was at 04:36 PM ----------
yes bro , first flash the rom , reboot device , finish setup wizard , turn off phone and go to recovery again and just flash gapps and reboot it ... this worked for me
Click to expand...
Click to collapse
for I've got an FC notification saying the "Settings" proccess has stopped already split right please if you want to try a flash via cwm or twrp zip file below
https://drive.google.com/file/d/0Bzg...w?usp=drivesdk
how to get root access?? -,- i cant install busybox .. *flashed supersu.zip but not work
priatnaadnyana said:
how to get root access?? -,- i cant install busybox .. *flashed supersu.zip but not work
Click to expand...
Click to collapse
i have tried every way to get the root access but its impossible , this rom is designed as non-rootable for now , i guess they will launch an update for root access ...
For mt6582?
is this rom working on 3.4.67? i am having mt6582 device and i am a dev of mediatek and i tries to port mini marshmallow which is available for other mt6582 device? but its going on boot loop....Can you tell me what extra u did to get it working on 3.4.67 kernel as the one i am trying to port runs on kernel 3.10.72 to my device which runs on 3.4.67....Can u help me?
Chinese remove applications that you somehow?
Kalo dari rom odex bisa ga om instal rom ini?
thanks bro. cobain minggu dpan deh. btw twrpnya bisa didownload dimana ya? cantumin juga dong biar enakan hahahaha