Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
My rom version is G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME
Answer seen on this forum to solve the problem is
1) delete the .md5 from the. tar.md5 and open it using winrar
2) extract the firmware..than delete the file from the folder use the new multitool in development thread to make a new tar for Odin..and flash
Can someone please give me step by step direction to do this, please i urgently need help
Related
I thought going back to stock everything would be easy enough, but not.
I've been having issues with my phone and my only blame I can put is at the custom roms feet.
I'm trying to go back to stock. I have the correct drivers installed, I have odin ready and downloaded the firmware.
I first tried G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar which failed
Comes up on the screen of the phone as: SW REV, CHECK FAIL, DEVICE: 3, BINARY: 1
With odin displaying:
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with another firmware: G920FXXU2BOFJ_G920FBTU2BOFJ_G920FXXU2BOFJ_HOME.tar which also failed exactly like the above.
I am in the process of downloading a third, one from sammobile. I don't hold up much hope for that either.
Any thoughts?
Hope did you changed the different USB port and original USB cable.
If still same problem , please install smart switch
put it in download mode
open smart switch.
choose the emergency software recovery option.
if the smart switchsays it can t recognize ur device..
Then you have an option there to pick the device manually.
write the model(SM-G920F)
Write the S/N (SERIALNUMBER) which you can find on the back
Download link : http://www.samsung.com/us/smart-switch/assets/downloads/smart-switch-pc_4_0_15113_12.exe
Thanks to Atntpt that opened my mind. I've unpacked .Tar odin package of 5.1.1 and flashed something like modem,boot and recovery (adding .tar in the file names before flash them) one per time, then a custom kernel and last twrp, and the phone stops to reboot. Samsung Switch done the rest of the work. Hi guys, please help me, i'm working no stop on my phone from yesterday without a solution. Yesterday i've tryed to flash mm(Coming from noblerom installed without tripping knox with modified bootloader of 5.0) from the post in general. Flash of mm has fail with an error of a bootloader. then i've tryed to flash latest stock rom(not of my country), and gave me an error in flashing hidden.img, i've tryed to flash in odin, seems fine and phone boots but have no charge. attacched to charger the phone boots and shut down after 5 seconds.
Both recovery and download mode, works
in official recovery and twrp can't mount system
in official says
failed to mount '/system (invalid argument
If you know something about, please help me.
Log of odin flash
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Atntpt said:
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Click to expand...
Click to collapse
can you send me a link?
I'm glad I could help
I have successfully installed TWRP without a hitch, and I can roll that back to stock recovery if I need to. Now, I have tried every available Sprint friendly rom I can find including stock ROMs. MOAR, etc. Every time I try to install a zip I encounter the same error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/sdcard/customROMfile.zip'
Not sure if this helps but the only zip file it ever successfully installed was Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms (https://forum.xda-developers.com/sp...galaxy-note-5-ogd-deodexed-stock-rom-t3191065) That installed correctly but when rebooting the phone is exactly the same - hangs on boot flash SAMSUNG logo screen as soon as you turn it on.
I did try to roll back to the stock firmware using Odin but when I try to choose the file within Odin to push to the phone Odin freezes. I have spent 3 days on this now and I really don't know what to do. I hope I didn't brick this $400 phone. Any help is surely appreciated as I have already had to buy a cheap replacement for the time being.
These are the errors I receive when trying to flash a .tar (stock recovery, custom rom,) within Odin (every version I have tried...... so many different versions its crazy)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> param.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
Try to use some different Odin versions and also be sure you flash the proper firmware file for your device
Here's what I did from start
Installed TWRP
installed lineage 17.1 with gapps and magisk
Removed everything and installed pixel experience 10 herolte
Volte was not working in both
So I downloaded the stock firmware (latest) according to my model - G930FD INS and tried to flash it through odin as per steps
But
The log gets stuck on 'SYSTEM.IMG' and after a while fails to flash the phone.
I just want to get my stock firmware back so I can start my calls and msgs.
Please help.
I didn't used anything different just clean flashed my phone.
I have the latest firmware for stock
log file
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
As the problem was, while flashing with Odin it wasn't showing any error and was only giving out output as Fail, turns out it was a port problem, I changed my USB port and cable and it worked fine. My friend also gave me advice to try it on another laptop because this happens sometimes and sometimes it works.
So if your log is something similar to what I have posted try downloading the latest Odin and changing ports or PCs, if nothing then create an id here and start a thread somebody will help you out for sure.
Peace
I have a samsung 12f7, and i am having some really bad problems
i tried flashing twrp (must have been the wrong ver) and i bricked my phone
i am getting SVB fail in odin mode, and when i try flash firmware with odin i get the following logs:
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5491 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i need help!
thanks in advance
Can you try?
While the phone is off, hold the power on and off simultaneously and connect the usb cable to the phone.
Then try to restore with odin the stock firmware.
Is your bootloader unlocked? Cant put custom stuff on till it is.
Uses csc not home csc. Stick to your binary version