Related
Just a quick question for anyone. I am looking for a tempered glass screen protector that actually fits. The 3 that I have ordered do not cover the screen completely. If anyone uses one that actually covers the display edge to edge could you please tell me what brand. Thanks all
Sent from my SM-N910T using Tapatalk
butchieboy said:
Just a quick question for anyone. I am looking for a tempered glass screen protector that actually fits. The 3 that I have ordered do not cover the screen completely. If anyone uses one that actually covers the display edge to edge could you please tell me what brand. Thanks all
Click to expand...
Click to collapse
I have been using a Moshi iVisor edge-to-edge for about 4 months and have had no problems with it. I have used it in conjunction with a UAG case and it fits perfectly. Note that it only has adhesive around the edges, and not on the screen itself. Others have reported the edges lifting and allowing dust in over time, but I have not yet experienced this (it is supposed to be fully washable and reusable, should this happen). Also it is one of those protectors with the 'grid of dots' on the glass (something to do with the way the glass is hardened, or touch sensitivity or something). This is only visible in direct sunlight when the screen is off, and I never really notice it.
http://www.mobilefun.co.uk/moshi-iv...ote-4-glass-screen-protector-black-p51561.htm
There are other edge-to-edge protectors, if you check out this thread (especially toward the end) you'll find others who have used them:
http://forum.xda-developers.com/note-4/accessories/tempered-glass-screen-protectors-t2878038
I'm thinking particularly of this one, which is similar to the Moshi:
http://www.amazon.co.uk/Tech-Armor-Samsung-Ballistic-Protector/dp/B00STN7SQY
Both edge-to-edge and those with a gap around have their pluses and minuses - but I, for one, can't stand the gap around the screen protector that the non-edge-to-edge protectors have, sorry but I think it looks dreadful. :/
butchieboy said:
Just a quick question for anyone. I am looking for a tempered glass screen protector that actually fits. The 3 that I have ordered do not cover the screen completely. If anyone uses one that actually covers the display edge to edge could you please tell me what brand. Thanks all
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Why start a new thread? Question has been covered so many times in the actual tempered glass thread.
Kinsman-UK said:
I have been using a Moshi iVisor edge-to-edge for about 4 months and have had no problems with it. I have used it in conjunction with a UAG case and it fits perfectly. Note that it only has adhesive around the edges, and not on the screen itself. Others have reported the edges lifting and allowing dust in over time, but I have not yet experienced this (it is supposed to be fully washable and reusable, should this happen). Also it is one of those protectors with the 'grid of dots' on the glass (something to do with the way the glass is hardened, or touch sensitivity or something). This is only visible in direct sunlight when the screen is off, and I never really notice it.
http://www.mobilefun.co.uk/moshi-iv...ote-4-glass-screen-protector-black-p51561.htm
There are other edge-to-edge protectors, if you check out this thread (especially toward the end) you'll find others who have used them:
http://forum.xda-developers.com/note-4/accessories/tempered-glass-screen-protectors-t2878038
I'm thinking particularly of this one, which is similar to the Moshi:
http://www.amazon.co.uk/Tech-Armor-Samsung-Ballistic-Protector/dp/B00STN7SQY
Both edge-to-edge and those with a gap around have their pluses and minuses - but I, for one, can't stand the gap around the screen protector that the non-edge-to-edge protectors have, sorry but I think it looks dreadful. :/
Click to expand...
Click to collapse
Thanks for your reply. I started the thread because I just got this device and when I attempted to check accessories it would loop me back to a blank page. This is the main reason I usually stick to one thread on XDA. People that just sit and wait to jump on someone for a simple question without bothering to send a PM but would rather say what they think they need to for everyone to see...so they can get a thumbs up. I really appreciate your reply . You would fit in well with the thread Im always on...respectful..fun..all around good time...so heres a ?up for you for acting like an adult. Im not new to this game...I just understand the respectful way to go about something?
FirekatV19N3..(FireGearV20)
So I got my second nuglas from eBay. Just like my first one it's cut small. But IMO it's the best for phone's that can't get rid of the halo. It has a very good oleophobic screen and very smooth. Mine has very little halo on sides and around home button. It still looks great with the minimal halo I can deal with.
Does it come with one already applied to the screen or is it just a plastic wrap around the phone?
It is just thin plastic.
Dozenboy0012 said:
It is just thin plastic.
Click to expand...
Click to collapse
Mine came with a protector already applied front and rear. the plastic that was on the phone had to be taken off to put the SIM in and much to my surprise there was a screen protector already on the screen.
There's a screen protector on it under the plastic sleeve. You can tell it's there by running your hand over the front facing camera area. It's a finger print magnet tho so I took it off.
Sent from my LG-H830 using Tapatalk
Same with mine. I didn't realize it was there until I noticed the seam around the prox sensor.
I left mine on, no problem with touch responsiveness.
So?
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.
[email protected] said:
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.
Click to expand...
Click to collapse
Seems like it's just cheap, generic shipping-protection plastic, yeah. I had a screen protector that shipped with my case, but it also didn't stick at the top where it curves... So, it's a good thing I was just buying for the case. Now I just have to never, ever, ever drop it on that spot at the top where it curves...
so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John
Bigjohn_S said:
so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John
Click to expand...
Click to collapse
I imagine it's gonna be a pain. With that light curve at the top, you'll have to be sure you get the right protector, and even so, it might just not cover the curved part at the top. The screen protector I got wasn't glass (harder plastic) and didn't have a curve to fit, so I think it was a G4 (didn't have one, myself, just assuming it didn't have a curved top) protector that was trying to be passed off... Research, research, research first!
The protector I ordered stops just past the top edge of the 'screen, below the speaker. we'll see how that goes. It's scheduled to arrive Friday...
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Yes. It's not good.
808phoneaddict said:
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Click to expand...
Click to collapse
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
tech_head said:
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
Click to expand...
Click to collapse
Which 2 brands have you tried?
808phoneaddict said:
Which 2 brands have you tried?
Click to expand...
Click to collapse
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
tech_head said:
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
Click to expand...
Click to collapse
Thank you for pointing it out. I (and other probably) appreciate the info. Ill definitely spread the word if I find one that works, or doesn't!
I returned these based on the reviews. No phone yet so didnt test myself, but why wait to be even further disappointed
https://www.amazon.com/gp/product/B071XHTLGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
heyitsrj said:
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
Click to expand...
Click to collapse
If any part of a screen protector doesn't stick then all manner of stuff will get stuck in between. For those w/ colored borders, that's not much of an issue but completely clear ones will eventually show all the dust and stuff on it.
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
benshoes said:
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
Click to expand...
Click to collapse
I don't like the feel of this stuff on the screen. It doesn't feel smooth.
It's 3M Urethane film. I have it on the front of my cars.
Ok don't try this one
Definite halo on this one
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_cp_apa_fHJUzb4M12ED5
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
foodplz said:
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
Click to expand...
Click to collapse
Actually much like the iPhone, it's flat until you get to the edge.
If the current round of protectors was 2mm smaller they would fit.
But for me, it doesn't matter.
I'm returning the phone.
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
gqukyo said:
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
Click to expand...
Click to collapse
Jus wait for the accessories to start coming out. Sounds like essential is open to 3rd parties making cases and screen protectors... So just got to hold on...this is what it sounded like from the reddit AMA
I have a Sopi 3M matte skin on the back and it helps with the grip a little but not by much... definitely helps w/ the fingerprints though... lol since it's matte, there can be visible smudges from time to time depending on how dirty/sweaty your paws are... I did read the AMA and they should've worked w/ case manufacturers long before release. I understand they want to keep it close to their vest until release (as to not tip off the competition) but they didn't ship the phone until much later than they said they would so in that time they could've sent out the outside schematics/dimensions to case manufacturers. No excuse!
The situation is the same for any devices that have curved edges. I'm not sure why companies just don't apply adhesive to the whole screen protector. A solution is using UV glue on a glass screen protector that isn't fully covered with adhesive. I've used the Whitedome on my Galaxy S8+ and it works really well. You should be able to buy the UV glue and UV lamp from Amazon and apply it to any glass screen protector. https://www.youtube.com/watch?v=8KZmF8uQESI
Hi,
I've ordered last week a NGP Pure Case for my white PH1 last week. Question is : I saw on Amazon that it won't fit with tempered glasss like orzero. I don't have orzero tempered glass, I have this one : https://www.amazon.com/Essential-Sc...74582&sr=1-1&keywords=lamshaw+essential+phone that NOT covers edges.
So do you think Pure Case will be fine for me ?
Thanks for your future answers.
I think you will be fine. The case only covers a very tiny area of the screen, enough to protect it but also to lift most screen protectors. From the amazon image and the fact that I use that incipio case I am like 90% sure that screen protector wont lift
TheDethEgineer said:
I think you will be fine. The case only covers a very tiny area of the screen, enough to protect it but also to lift most screen protectors. From the amazon image and the fact that I use that incipio case I am like 90% sure that screen protector wont lift
Click to expand...
Click to collapse
You have it ? Can I have a pic plz ?
EDIT : If u want a pic of my tempered
http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg
There you go
thanks, u have a tempered ?
EDIT : Check my tempered on the link and tell me
When using this case i recommend a "Case Friendly" screen protector, tempered glass ones I have pop up around the top of the device. Just about to order https://www.amazon.com/dp/B075P1FSDX/_encoding=UTF8?coliid=I1IR0821FMR2TC&colid=3IFPSSR1GMYZN
basongwe said:
thanks, u have a tempered ?
EDIT : Check my tempered on the link and tell me
Click to expand...
Click to collapse
No, I have a skinomi screen protector
Okay, so i'm worried again... :/
Cause i've a tempered (even if it doesn't fit the corners as u can see here : http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg )
basongwe said:
Okay, so i'm worried again... :/
Cause i've a tempered (even if it doesn't fit the corners as u can see here : http://reho.st/view/self/5f8cd6acb097dc6cf027725f7aabba1752b9e6de.jpg )
Click to expand...
Click to collapse
looks like you got an all area adhesive screen protector which lifts off at the curved screen edges. Since it's already slighty lifted off at the edges I think there is no problem putting the Incipio on. The Incipio case is a problem for screen protectors which only have adhesive at the very edge, specifically at the top of the screen where the camera cutout is located. It will push and lift the adhesive off and since there is no other adhesive further down, the screen protector pretty much lifts all the way up. You then have a "clicking" sound when you tap onto that area (the adhesive will temporarily stick and then pop off when you let go).
Your screen protector is not perfectly centered and you may have small issues at the top and the bottom right where it comes close to the edge. Maybe you can re-center it.
derausgewanderte said:
looks like you got an all area adhesive screen protector which lifts off at the curved screen edges. Since it's already slighty lifted off at the edges I think there is no problem putting the Incipio on. The Incipio case is a problem for screen protectors which only have adhesive at the very edge, specifically at the top of the screen where the camera cutout is located. It will push and lift the adhesive off and since there is no other adhesive further down, the screen protector pretty much lifts all the way up. You then have a "clicking" sound when you tap onto that area (the adhesive will temporarily stick and then pop off when you let go).
Your screen protector is not perfectly centered and you may have small issues at the top and the bottom right where it comes close to the edge. Maybe you can re-center it.
Click to expand...
Click to collapse
Small issues are not a big deal, if u think I can use both ?
andril said:
When using this case i recommend a "Case Friendly" screen protector, tempered glass ones I have pop up around the top of the device. Just about to order https://www.amazon.com/dp/B075P1FSDX/_encoding=UTF8?coliid=I1IR0821FMR2TC&colid=3IFPSSR1GMYZN
Click to expand...
Click to collapse
I can vouch for this one. It fits great with my Tudia TAMM case. It's a TPU just like the Skinomi and IQ but a dry install. You peel off a small horizontal strip at the top to expose the adhesive. Position it starting at the top and then bend it a little to start separating the rest of the backing and start pushing your way down the screen so the backing comes off completely at the end. It's really grippy at first but that will pass as you use your phone. Since it is a TPU it will develop marks on it over time if you're not careful so be careful installing when trying to push out bubbles or whatever. I used a credit card wrapped in microfiber cloth and pushed out the bubbles before removing the top protective film. If you have bubbles that won't easily work out they will disappear after a few hours.
Best option so far IMO. I had the Delta Shield TPU before and the TAMM case push up the corners and edges.
Sent from my PH-1 using Tapatalk
So with my tempered, it will pop out or no ? :/
basongwe said:
So with my tempered, it will pop out or no ? :/
Click to expand...
Click to collapse
If you look at your picture your screen is already lifted off at the edges (read my previous post). So it is probably not a big deal
Hope you're right
But what do you mean by lifted ? My tempered should put off by itself with time ?
Tikerz said:
I can vouch for this one. It fits great with my Tudia TAMM case. It's a TPU just like the Skinomi and IQ but a dry install. You peel off a small horizontal strip at the top to expose the adhesive. Position it starting at the top and then bend it a little to start separating the rest of the backing and start pushing your way down the screen so the backing comes off completely at the end. It's really grippy at first but that will pass as you use your phone. Since it is a TPU it will develop marks on it over time if you're not careful so be careful installing when trying to push out bubbles or whatever. I used a credit card wrapped in microfiber cloth and pushed out the bubbles before removing the top protective film. If you have bubbles that won't easily work out they will disappear after a few hours.
Best option so far IMO. I had the Delta Shield TPU before and the TAMM case push up the corners and edges.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Looks like availability its after xmas..
Sent from my PH-1 using Tapatalk
basongwe said:
But what do you mean by lifted ? My tempered should put off by itself with time ?
Click to expand...
Click to collapse
look carefully at the picture you took. I had this with all my curved screen phones. the lighter edge you see is where the screen protector is not attached. If you have not noticed it yet then I'm afraid I just ruined your enjoyment with it.
sorry
Mine lift the tempered glass. Unless they make one a little smaller I don't think it will work.
I think I am going to just go with the Incipio case and nothing more. The screen seems more responsive.
Sent from my PH-1 using Tapatalk
Should've went with the DualPro from Incipio. I just got a black one and not only is it the highest quality case I've seen for the device but it fits just fine with Orzero TGP on.
EDIT: Felt as though I should add a caveat that applied to me, likely applies to a lot of folks having issues trying to use a case and screen protector simultaneously. You really need to nail the placement of the screen protector in order to prevent case interference, when centered as perfectly as is reasonable I have not encountered any issues with lifting but it did take two attempts to hit the sweet spot. You're much more likely to encounter lifting if the screen protector is favoring one side even slightly, so those guide stickers that you tend to want to chuck actually come in very handy when trying to get the placement just right.