Database Info

[VIDEO] Spigen GLAS.t SLIM Screen Protector Install for Samsung Galaxy S4

Since this was my first install of a glass screen protector, I didn't know what to expect. I was glad to find out that the install process seemed easier than any InvisibleSHIELD I've done in the past. The results are great so far. No bubbles and the screen is beautiful.
I have tons of cases laying around so I'll add to this post and give a run down of how things go.
Verified OKAY
Spigen Slim Armor
Incipio DualPro SHINE (a little tight... place 1st layer on perfectly before slipping into outer layer)
Speck CandyShell
Trident Aegis Series (doesn't fit 100% perfectly on top edges... still okay)
Not Working
Seidio SURFACE (aka Platinum / PT Best Buy Case) - Will not close completely.
EDIT:
Reply to member questions...

Thanks! Great video...I may have to pick one up.
Sent from my Nexus 10 using xda app-developers app

Just picked up the Spider GLAS. Trying screen protector which is thinner than the GLAS. t. Couldn't be happier with the case, plus it doesn't interfere with my incipio case. Perfect solution for anyone looking for a screen protector.

By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?

flu13 said:
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
Click to expand...
Click to collapse
You are correct sir!

Thanks for the video, I'm waiting for my Mime glass screen protector to come in. I'll try to add the aluminium button in before the screen install.

levaryw thought
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.

Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?

Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.

vdanasto said:
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Click to expand...
Click to collapse
Oops. Before making another video, I must have just skimmed over your question. It appears to work fine on the lock screen. Which version did he have? GLAS.t or GLAS.tr?
flu13 said:
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Click to expand...
Click to collapse
It was actually the supplied jelly bean button. It only took some time because I used the alignment around the home button to determine where to drop the GLAS onto the surface pretty much. That and focusing on the sides more than the top. Also, I thought there was a huge bubble down there initially as well. It was the plastic protector though.
screwdestiny said:
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
Click to expand...
Click to collapse
I looked at the product quickly and it appears to have a larger opening up top. Since this case really hugs the device, that becomes an issue for the Spigen GLAS.

you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.

galaxy808 said:
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
Click to expand...
Click to collapse
Oops. Usually I give the video a quick one time over. Must have missed it.
Since I pay for 99% of the stuff seen, and it is my phone, I have to make a choice. Do I make a video and sacrifice a lousy install, or do I poke my head in the shot .
I think they might leave those areas open to ensure they function correctly. It does cover the front facing camera though. If you look at the protector the poster a few above was talking about.... It doesn't appear to cover much of the top at all.
As long as you're rocking something, it's better than nothing. I thousand knives can't damage Gorilla glass, but 1 penny sharing space in the same pocket sure can lol.

yeah I think I prefer the glas.t over the TR just because it's thinner can looks more like nothing's on than the TR with the beveled edges.
I may get it eventually maybe if they have a father's day sale lol, like the 20% off memorial day.

I'm still digging this product. I have some Chinese glass screen protectors, but I'm going to have to give them away for user submitted reviews.
I can't get myself to take the Spigen off the S4.

With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?

Great video. Thanks for sharing! I love SPIGEN products.

Thx for your video. It will help me so much

Ryukouki said:
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Click to expand...
Click to collapse
Not really. I use a case on it always though.
You can feel the edges of the glass if you're moving it around, but if you just place the phone directly up to your ear, you won't notice anything.
It is my pleasure to provide the videos. Thanks for watching.

Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....

eyecon82 said:
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
Click to expand...
Click to collapse
The phone hasn't been put through a lot of use to date, however as of this weekend my wife is giving up her iPhone 5 and using this regularly. We have a newborn baby and she will be carrying that thing in her purse and back pocket most of the time.
If there are issues, she should be able to get them to appear! I'll report back if anything happens.

Does the T-mobile version come with a screen protector applied?

Does it come with one already applied to the screen or is it just a plastic wrap around the phone?

It is just thin plastic.

Dozenboy0012 said:
It is just thin plastic.
Click to expand...
Click to collapse
Mine came with a protector already applied front and rear. the plastic that was on the phone had to be taken off to put the SIM in and much to my surprise there was a screen protector already on the screen.

There's a screen protector on it under the plastic sleeve. You can tell it's there by running your hand over the front facing camera area. It's a finger print magnet tho so I took it off.
Sent from my LG-H830 using Tapatalk

Same with mine. I didn't realize it was there until I noticed the seam around the prox sensor.
I left mine on, no problem with touch responsiveness.

So?
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.

[email protected] said:
Is it just plastic or not. I think it is. I bought a very expensive screen protector cause of the expense of the phone and it does not fit the LG G5. It also doesn't stick down at the top where it curves. Taking this back again.
Click to expand...
Click to collapse
Seems like it's just cheap, generic shipping-protection plastic, yeah. I had a screen protector that shipped with my case, but it also didn't stick at the top where it curves... So, it's a good thing I was just buying for the case. Now I just have to never, ever, ever drop it on that spot at the top where it curves...

so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John

Bigjohn_S said:
so, what about applying a tempered glass protector? On top of the existing one? or remove the existing one?
I like the existing protector - it's been quite fine IMHO, and no bubbles, very smoothly applied!
John
Click to expand...
Click to collapse
I imagine it's gonna be a pain. With that light curve at the top, you'll have to be sure you get the right protector, and even so, it might just not cover the curved part at the top. The screen protector I got wasn't glass (harder plastic) and didn't have a curve to fit, so I think it was a G4 (didn't have one, myself, just assuming it didn't have a curved top) protector that was trying to be passed off... Research, research, research first!

The protector I ordered stops just past the top edge of the 'screen, below the speaker. we'll see how that goes. It's scheduled to arrive Friday...

Official OnePlus 6 Tempered Glass Protector. How does it Fare?

Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.

sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.

suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.

I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk

Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!

^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.

unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market

niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)

sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk

jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.

the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money

unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?

I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.

I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?

This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk

suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?

JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.

sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on

suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.

Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).

Screen protector - NOT tempered glass but "old school" film

Hello all, I have tried a couple of tempered glass screen protectors; I have also read many many reviews.
It seems that there is no tempered glass protector that would be full screen; fit (most) cases and does not release on the edges for all.
I actually did not mind the screen protector which was installed by 1+ when I got the phone (and I did not like the tempered glass ones I tried).
So I contacted them today asking if I could buy a couple of those. To my biggest disappointment I was advised that although I am not the first one to ask, they do not consider the included screen protector to be a "product" and so they do not sell it even if I wanted a large quantity.
I spent some time researching ebay - but most (nearly all) sellers sell only tempered glass (which I don't want). The few seller that sell films are very expensive ($10+ vs. $1 for the tempered glass). That is also surprising as the cost of the film is much less...
So, my question to you all: who has tried film screen protectors? Where did you get it from and what experience did you have?
Thank you for sharing

I personally use 3MK Flexible glass - its hibrid glass. I use it from years, now on OP6. I think its the best option for any phone
https://folie-ochronne.3mk.pl/pl/p/OnePlus-6-Nietlukace-szklo-hybrydowe-3mk-FlexibleGlass/39482

I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just ordered me a set.

Im waiting for my iqshield to be delivered next week. Got some high hopes. Gave up on tgsps as there is none currently i would be happy about. Not even the original one.

I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?

Abaddon said:
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Click to expand...
Click to collapse
Its Door to Door only. For me, they shipped within 2 days.

bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?

ajsmsg78 said:
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
Click to expand...
Click to collapse
I don't have one installed at the moment, testing a G-Most TPG. But the fit is pretty precise, need patience to get it even on both sides. It's case friendly.

Z51 said:
Just ordered me a set.
Click to expand...
Click to collapse
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you

Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
will do

Might grab some of these and see what they are like https://www.ebay.co.uk/itm/3-X-For-....TR1.TRC0.A0.H0.Xoneplus+6+full+coverage.TRS0

Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.

Z51 said:
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Click to expand...
Click to collapse
Hmm, thats not good. Is it equally too big each way or is it just difficult to install totally centered, so its big on one side only?
A pic would help for sure.

I finally found regular PET protectors similar to the OEM ones that fit the phone well and are of good quality. I got them from here:
https://www.ebay.com/itm/5X-Ultra-Thin-Tempered-Glass-PET-Soft-HD-Screen-Protector-Film-For-OnePlus-6/163161457336?ssPageName=STRK%3AMEBIDX%3AIT&var=462326426650&_trksid=p2060353.m2749.l2649
The adhesive is pretty sticky on them so they don't lift off but it's hard to get them perfectly bubble free. The way I get these on perfect every time is put rubbing alcohol all over the screen then apply the protector and set it in place exactly centered (it's easy to move because of the alcohol) Then lightly push down on it and very lightly push out some of the alcohol so you don't see any bubbles. Then wait five minutes and peel off the front layer then lightly with a small cloth push out the rest of the bubbles. When the alcohol dries (takes about 10-15 mins) it will adhere perfectly and there will be no residue, bubbles or dust under the protector.

I've got an IQshield on my OP6 http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html
I tried a few TG ones and wasn't happy with any. They either didn't stick properly or had the annoying black border. The IQshield is the best protector I've tried.

The best screen protector is the soft nano TPU protectors they sell at ebay or aliexpress for a buck a piece and these cover the whole screen and can be applied wet with some soap and water.

Aakash_Aaku said:
Does it cover the entire screen or leaves a gap at the edges?
Click to expand...
Click to collapse
I know why you are asking ...Most protectors don't cover the edges well. But this does .

I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.

crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
---------- Post added at 06:47 AM ---------- Previous post was at 06:42 AM ----------
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)

Accessories The best screen protector secured at last!

After many months of scouring the internet and more money spent than I'd like to admit, I have finally found what I would consider a better screen protector than even the OEM installed one from Samsung. I have tried close to 10 different protectors for my Z-Flip 3 and they all were relatively disappointing when comparing to Samsung's OEM film. They ranged from horrible to acceptable but still not ideal. Most Amazon sellers (even the top rated films) fail where you'd expect it to fail, the hinge, and it seemed all but impossible to achieve the results the phone comes with new. That is, until I got my hands on whitestone's new premium DOME SILK(UTG) film. This guy is actually superior to the OEM film and outclasses it in every way. The feel is fantastic, the clarity is perfect and the most important part is the hinge adhesion, which is every part as good as the OEM one. With the installation jig that is included with the dome film, I got a perfect install on my first try without a single bubble or blemish even across the hinge. So long as you watched the install video which you have to scan a QR code on the box to access, the install is extremely smooth. It's nerve-racking at first but extremely doable. When adhering the hinge area, I highly recommend you go as slow as possible with the squeegee to ensure no bubbles in the area that dips. Anyway I won't make this any longer, I just wanted to let everyone else know that if you want and OEM+ screen protector for your z flip 3 you should absolutely buy the Whitestone dome silk film the first time instead of wasting money on films that bubble up after one or two folds or that feel like hot garbage.

I'll second these products. Recently purchased as the OEM screen protector started to develop cracks at the hinge (lemme tell you how freaked out I was until I realized it was the protector and not the actual screen). Install was easy and the jig is clever and effective, just MAKE SURE YOU UNDERSTAND THE INSTALLATION DIRECTIONS.
No issues with the product so far and perfect adhesion.
https://www.amazon.com/gp/aw/d/B09LV43G8M

Fivecent said:
I'll second these products. Recently purchased as the OEM screen protector started to develop cracks at the hinge (lemme tell you how freaked out I was until I realized it was the protector and not the actual screen). Install was easy and the jig is clever and effective, just MAKE SURE YOU UNDERSTAND THE INSTALLATION DIRECTIONS.
No issues with the product so far and perfect adhesion.
https://www.amazon.com/gp/aw/d/B09LV43G8M
Click to expand...
Click to collapse
Mind if I ask how long you've had yours installed for?

Mind I ask how long have you both had it installed?
Also had the phone in cold weather?
Any chance of photos of the phone with film installed?
Thanks!

BWA80 said:
Mind I ask how long have you both had it installed?
Click to expand...
Click to collapse
I've had mine installed for almost two weeks now. I feel like if it hasn't started lifting yet, chances are that it won't.
BWA80 said:
Also had the phone in cold weather?
Click to expand...
Click to collapse
I live in the northeast, 2 hours from Canada so yes, it's been between 5°- 25° consistently. I will say that I am conscious about the cold and generally try not to flip the phone open if I've been outside for a while because of the horror stories I've heard about displays cracking when opening in extreme cold.
BWA80 said:
Any chance of photos of the phone with film installed?
Thanks!
Click to expand...
Click to collapse
Unfortunately, I probably won't be able to get a picture of it installed because my only other phone is a galaxy S9+ with a cracked camera lens. I tried taking a pic with my surface pro 4 but it's so grainy it's impossible to make out. I can tell you that visually, it's identical to the oem. Size and finish are the same, it's when you touch it that you realize how much better it is than the oem. Just picture the stock screen protector but slightly slightly shinier.

So here's an update, yesterday I got a new case, one of the full protection cases that have a hinge shield built in and after using the case yesterday and waking up this morning, I found that the entire portion of the screen protector that conforms to the hinge lifted from the screen. Now, I'm not sure what the culprit was, comma if it was somehow the new case that caused this or if it was just a screen protector itself But I have another backup backup screen protector that I am going to put on after work today work today and use it with my old case to verify if the case caused this problem or not. I personally don't see how it's possible that the case caused it to lift but I can't deny The significance of it lifting within 24 hours of putting a new case on. To me, it looks like the protector almost shrank a little and contracted which caused it to lift in the area with the most pressure which would be the hinge because of the curves but I will verify this and I will update this post with the results.

It's been 4 days since installing the replacement film I had and it's already holding up much better than the first. The first lasted only 48hrs before the whole hinge lifted up. I installed this one a little different. First, when using the squeegee to adhere the film, I used much more pressure and slid it much slower (especially around the hinge area). Next, when it was finished being installed, I opted to not close the display for a full 24hrs to allow the adhesive to set and the film to "lock" to the shape of the display. Call it a curing time if you will. I also used my variable temperature heat gun set to its lowest temperature (350°f) and warmed the film mostly around the hinge while using my thumb to apply pressure back and forth. The purpose of the heat was to mock heat cycling the film and further set it to the display. All of these steps combined resulted in a perfect application again but now 4 days later in the same 15-30°f ambient temp I have no lifting at all and no signs of any adhesion issues. This will be my last post on this topic unless it fails in an unreasonable amount of time as there's nothing else I can do to install it and better and at that point I would deem it a bad product. For now I stand by it being the best aftermarket film for this phone.

I've just bought it and it should arrive on 3rd of march. I was wondering if it comes with a glass already installed and, since I am in love with Tough Armour cover of Spigen, glass screen protectors ( even of the little screen ) would be compatible with spigens cover.

MySelf_v1 said:
I've just bought it and it should arrive on 3rd of march. I was wondering if it comes with a glass already installed and, since I am in love with Tough Armour cover of Spigen, glass screen protectors ( even of the little screen ) would be compatible with spigens cover.
Click to expand...
Click to collapse
No glass interior, but Spigen sells an outer protector perfectly fit to their cases. It's held up pretty well and covers the camera lenses without ruining the pictures.
Galaxy Z Flip 3 Optik Lens Protector + Hinge Film
Browse our Galaxy Z Flip 3 phone camera Optik Lens Protector. Our protective lens protector lays over the cameras to allow for a clean and flat look to keep your lens dust and scratch free. Shop now.
www.spigen.com
Depending on availability, it is cheaper on Amazon.

twistedumbrella said:
No glass interior, but Spigen sells an outer protector perfectly fit to their cases. It's held up pretty well and covers the camera lenses without ruining the pictures.
Galaxy Z Flip 3 Optik Lens Protector + Hinge Film
Browse our Galaxy Z Flip 3 phone camera Optik Lens Protector. Our protective lens protector lays over the cameras to allow for a clean and flat look to keep your lens dust and scratch free. Shop now.
www.spigen.com
Depending on availability, it is cheaper on Amazon.
Click to expand...
Click to collapse
Thank you!!!
Does the case affect the flash? I had some issues with Tough Armour cover on other phones

MySelf_v1 said:
Thank you!!!
Does the case affect the flash? I had some issues with Tough Armour cover on other phones
Click to expand...
Click to collapse
Hasn't for me, but I don't use it regularly.

twistedumbrella said:
No glass interior, but Spigen sells an outer protector perfectly fit to their cases. It's held up pretty well and covers the camera lenses without ruining the pictures.
Galaxy Z Flip 3 Optik Lens Protector + Hinge Film
Browse our Galaxy Z Flip 3 phone camera Optik Lens Protector. Our protective lens protector lays over the cameras to allow for a clean and flat look to keep your lens dust and scratch free. Shop now.
www.spigen.com
Depending on availability, it is cheaper on Amazon.
Click to expand...
Click to collapse
Tough Armour arrived, Optik Lens Protector arrived, tomorrow hopefully the phone will arrive too

Arrived. Everything is ok but the film on the screen. The feeling is tremendous yet they tell you not to remove it. Wtf?
Is fitting a glass over it a possible solution?

I just tried the Whitestone Premium,,, what a waste of time. Got it on with no bubbles. Let it sit for 5 minutes just to make sure. Went over it again. Still lifted at the crease as soon as I flipped it closed. Reseated 2 more times, immediately lifts as soon as I close it. Anybody got any other protectors that will actually stay on the crease???

Retiredbc473 said:
I just tried the Whitestone Premium,,, what a waste of time. Got it on with no bubbles. Let it sit for 5 minutes just to make sure. Went over it again. Still lifted at the crease as soon as I flipped it closed. Reseated 2 more times, immediately lifts as soon as I close it. Anybody got any other protectors that will actually stay on the crease???
Click to expand...
Click to collapse
Hi,
Did you apply it correctly?
I had the same problem and then i noticed that i accidently applied the screen protectors protector
It is very easy to make that mistake. You have to read the instruction very carefully and really look that you are applying the correct part. I learned it the hard way. Bought a new one and got it applied correctly.
Now, it will not lift off, it's stuck to the screen very firmly for over 4 months now with no problem.

BWA80 said:
Hi,
Did you apply it correctly?
I had the same problem and then i noticed that i accidently applied the screen protectors protector
It is very easy to make that mistake. You have to read the instruction very carefully and really look that you are applying the correct part. I learned it the hard way. Bought a new one and got it applied correctly.
Now, it will not lift off, it's stuck to the screen very firmly for over 4 months now with no problem.
Click to expand...
Click to collapse
Yes I applied it correctly with the provided jig you can only apply it one way.

Retiredbc473 said:
Yes I applied it correctly with the provided jig you can only apply it one way.
Click to expand...
Click to collapse
I applied it with the jig, the right way and still got it wrong...
cuz if you get it right, it should stick and stay with no problems.
On the film there is 3 layers of plastic, two have to be removed. the real protector is like sandwiched in between 2 protective films.
Just a heads up.

BWA80 said:
I applied it with the jig, the right way and still got it wrong...
cuz if you get it right, it should stick and stay with no problems.
Click to expand...
Click to collapse
It stayed stuck good everywhere but the Crack when you fold it. Yea it should stick and stay......but it didn't....Moron