Related
I'm looking for a clear screen protector with a cutout for the front camera. It needs to perfectly cover the screen. Does anyone here have any recommendations for one to get?
lsquare said:
I'm looking for a clear screen protector with a cutout for the front camera. It needs to perfectly cover the screen. Does anyone here have any recommendations for one to get?
Click to expand...
Click to collapse
perhaps you could spend a few min browsing trough the screen protector thread.
plenty of revies of what ppl like.
i'm using many freebies ones that are very good, but..........
traces of oil from my face and fingers are horrible
on the other Screen Protector topic, some one mentioned a brand that is SUPPOSEDLY Anti Oil resistant
The best screen protector is already on it. Gorilla Glass!
Otherwise I just use one of those 5 for a couple of quid on ebay. Not bad at all.
Case
Hello,
I bought a really nice case for only 7 euro's (https://www.b2ctelecom.nl/CASETSI901/silicone-hoesje-voor-samsung-i9000-galaxy-s-white-tsi-tp.html). I am very happy with the case, it fits perfectly.
I also bought this screenprotor: https://www.b2ctelecom.nl/MIRRSI900...en-protector-voor-samsung-i9000-s-galaxy.html but this is not a good one. It looks like the screen is darker and putting this on you don't get the fulle benefit of the super screen
This shop has more goodies for your Galaxy S (see https://www.b2ctelecom.nl/p/10/mid/3/tid/1312/samsung-s-i9000-galaxy.html)
Good luck
Thijs
I prefer to go naked. Clear screen protectors are fingerprint magnet, and matt screen protectors look bad. There's no in between.
snapper.fishes said:
I prefer to go naked. Clear screen protectors are fingerprint magnet, and matt screen protectors look bad. There's no in between.
Click to expand...
Click to collapse
Gotta agree with that.
I'd put a protector on if I were you. Don't learn the hard way like myself. I was going naked screen for a bit and as every day went by I was confident the screen was not going to get a scratch.
Then I accidently shoved the USB cable with my phone in my pocket and bang - scratched it. Just a small one, but enough to be seen in reflection.
Better a screen protector get scratched and replaced rather than the screen have an unrepairable scratch for it's life.
FITRS said:
I'd put a protector on if I were you. Don't learn the hard way like myself. I was going naked screen for a bit and as every day went by I was confident the screen was not going to get a scratch.
Then I accidently shoved the USB cable with my phone in my pocket and bang - scratched it. Just a small one, but enough to be seen in reflection.
Better a screen protector get scratched and replaced rather than the screen have an unrepairable scratch for it's life.
Click to expand...
Click to collapse
For sure I'm going to get a screen protector. I just find it funny how some people would bother posting in this thread telling me to go naked when I've clearly made up my mind. The glass is scratch resistant and not scratch proof. Like you, I also stuff coins and other small items into my pocket in addition to my cellphone so I wouldn't be surprised if scratches form if there's no protection on the screen.
SGP Steinheil Ultra Crystal
or
SGP Ultra Oleophobic Film
I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!
Ptechnix said:
I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!
Click to expand...
Click to collapse
Where did you bought yours from? Does it have a cut out for the front camera?
You can get them on ebay for a decent price. They don't have a cut out for the front camera but I don't mind that.
Ptechnix said:
I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!
Click to expand...
Click to collapse
+1, I am really satisfied with it. Too sad there was no cover for the back camera in the package.
I bought a Case mate case for it which comes with a screen protector. case will hopefully arrive today, so I'm hoping the screen protector is a good one
lsquare said:
Where did you bought yours from? Does it have a cut out for the front camera?
Click to expand...
Click to collapse
There's no cut out for the front camera but in all honesty, the shield presents no discernible degradation in front camera quality.
I got mine from Cretouch, but you can also find it available from SGP eBay resellers or SGPcraft themselves.
The oleophobic properties of the screen aren't as pronounced as I would like, but it still beats non-oleophobic screens. I was using the Martin Fields protector prior to this one which was excellent in terms of clarity, but it looked like a greased pig had gone to town on it after you were done playing with it.
i recently received my galaxy and made sure i got myself a good screen protector. after all everyone raves about the screen and i'm sure after a 2 year contract it's going to have a few marks without one.
i bought a Martin Fields Overlay. Not cheap but more than happy with it, I've used the cheap ones from ebay on other phones and they definitely aren't as good.
it includes a cover for the camera lense as well.
sorry new account so cant post direct link, just google martin fields screen protectors.
I put the Invisible Screen on the 2 i9000's we have and am happy given the circumstances. The protector certainly holds some oil and grim but it's easily cleaned. I'm willing to deal with the cleaning for a scratch-free screen.
Screen protector only (what I did)
http://cgi.ebay.ca/INVISIBLE-Screen...324142?pt=PDA_Accessories&hash=item5adb6baf2e
Full body protector
http://cgi.ebay.ca/FULL-BODY-Screen...635151?pt=PDA_Accessories&hash=item563ee8da8f
[EDIT] forgot to add that the protector DOES have a cut-out for the front facing camera
Why would you want a screen protector when you already have gorilla glass. It doesn`t scratch that easily. It`s not resistive touch screen. It`s capacitive and it`s gorilla glass. Enjoy the clear display without worries is my suggestion.
i have copter, the same as IS and it looks like crap! Wonder if its the pentile that creates interferance patterns... IS looks good on lcd
Can someone recommend a static grip screen protector, please? I don't like the idea of the ones that need to be squeegeed on there, but I'm hoping there are some good alternatives.
Thanks,
-Rob
Clarivue ultra clear
Sent from my HERO200 using XDA App
...
Thanks for the help. I checked them out. Those are exactly what I was looking for!
-Rob
yea i ordered mine yesterday, ive read good things about them, ships from my home country of canada
ravizzle said:
Clarivue ultra clear
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Any experience with any of the other clarivue screen protectors (anti glare, mirror, or privacy)? If so, what were your impressions of them?
i just use the gorilla glass, dont like the feel of the screen with a protector on. Also, with this nice plastic case i got from best buy, the phone can never land on the screen if dropped.
ImSoHungry said:
i just use the gorilla glass, dont like the feel of the screen with a protector on. Also, with this nice plastic case i got from best buy, the phone can never land on the screen if dropped.
Click to expand...
Click to collapse
Are you referring to the platinum (rebranded seidio) case?
remedy22 said:
Are you referring to the platinum (rebranded seidio) case?
Click to expand...
Click to collapse
yes, funny you say that, i thought it felt exactly like my seidio!
remedy22 said:
Any experience with any of the other clarivue screen protectors (anti glare, mirror, or privacy)? If so, what were your impressions of them?
Click to expand...
Click to collapse
I havent used any of those other ones, i've read good things about anti glare and ultra clear. but havent heard anything positive or negative about the others.
also, i have used a generic mirror screen on my hero before, makes the phone look nice when its off, however horrible to use in daylight and also screen brightness has to be all the way up so kills battery
ImSoHungry said:
i just use the gorilla glass, dont like the feel of the screen with a protector on. Also, with this nice plastic case i got from best buy, the phone can never land on the screen if dropped.
Click to expand...
Click to collapse
I'd like to do this too, I absolutely love the feel and look of the phone without a screen protector. But I am too worried about scratches. I keep hearing people say things like it's Gorilla Glass and can't scratch. I watched the videos where people attempt to scratch the Gorilla Glass screen on purpose and can't. But every once in a while I read a comment from someone that says they got a scratch on their Gorilla Glass screen and they have no idea how. I'm not sure what to think.
Got my clarivue today, installed easy, can barely tell its there and doesn't mess with capacitive buttons on bottom.
Sent from my Epic 4G
docprego said:
I'd like to do this too, I absolutely love the feel and look of the phone without a screen protector. But I am too worried about scratches. I keep hearing people say things like it's Gorilla Glass and can't scratch. I watched the videos where people attempt to scratch the Gorilla Glass screen on purpose and can't. But every once in a while I read a comment from someone that says they got a scratch on their Gorilla Glass screen and they have no idea how. I'm not sure what to think.
Click to expand...
Click to collapse
Is gorilla glass what the screen is made of? 'Cuz I scratched mine. :-( My accessories were in the mail but I went out on a My Tracks expedition on a local hiking trail over the long weekend (couldn't resist! I've never had GPS on a phone) and I dropped my phone and it got scratched on what must've been a pebble in the otherwise softish dirt trail.
More accurately, my phone fell out of my pocket when I jumped thinking a spider landed on my head.
Received my clarivue screen protectors in the mail today and I am less than impressed with them.
remedy22 said:
Received my clarivue screen protectors in the mail today and I am less than impressed with them.
Click to expand...
Click to collapse
Thoughts? Pros cons? Please explain.
NeonMonster said:
Thoughts? Pros cons? Please explain.
Click to expand...
Click to collapse
It's not the quality of the screen protector itself that I have problem with. It is completely clear (as described) and has a nice feel to the touch. Not the same silky smoothness as glass obviously, but not a rubbery feel to it either.
The overall cut and fitment of the screen protector is my biggest problem with it. Clarivue says that all their screen protectors are cut slightly small (which is fine) but the design for the epic isn't centered properly. If you align the top correctly (so that the front facing camera and sensors are exposed) you will find that the entire screen protector favors the right hand side of the phone. This leaves you with a noticeable gap on the left side and practically no gap on the right side.
I also encountered some installation issues since the second tab did not want to separate from the screen protector. I wouldn't hold that against clarivue however, but in my case I had to physically separate them which caused the corner to not adhere to the screen properly.
I'm going to contact clarivue about these issues on monday and see what they have to say about it. I've heard good things about seidio's ultimate screen guard and will mostly like order a pair of them when they become available.
I had one custom fitted at a mall near me for 9 dollars. I really cant tell its there and it add to the feel of the screen (less greasy/finger marks).
i have a tiny scratch and have no idea what it's from. I assume it was a rivet on my jeans or some****, kinda disappointed since I've checked out people trying to scratch the screen but couldn't
I got my screen protector in the mail today and put it on my phone. I figured I should share my thoughts along with some pictures for those who are looking at screen protectors.
The pack came with two screen protectors, a squeegee, some dust removal stickers, and a small micro fiber cloth. The protector was not too bad to put on, pretty similar to other dry application ones and the Realook which I have used on my Samsung Vibrant. It was kind of tough to align because the screen protector is literally exactly the width of your screen, so if you're off alignment, it looks horrible.
The screen protector is definitely super clear. It also is a fingerprint magnet, and it feels slightly tacky. I'm hoping that tackiness will go away as it gets more use, because I like being able to glide over my screen smoothly.
One huge disadvantage with this screen protector is that because of the curved screen, the protector only covers the flat part. It is definitely noticeable when you see it closer. I tried taking pictures to depict this. I also with they would have just had the protector cover the FFC. I'm not sure how it would actually affect the optics (if at all), but I really hate that cut out! Overall, I'm decently content with my purchase, but I would love to see pics and reviews for BSE when those arrive since I'm considering that for the back, and even replace the front if I end up not liking the Spigen.
Thanks so much for these. I used the SGP on my Gnex and loved it. There's something special about these Crystal series ones but I don't remember what it is.
Sent from my Nexus 4 using Tapatalk 2
I got the Ultra Clear for my N4. It hasn't arrived yet, so for now I'm using my spare One X Oleophobic. The Oleophobic is great, really good for repelling fingerprints, I would have got it but when I bought my N4 UltraClear they weren't selling the Oleo. Thanks for the pictures, it seems to fit a lot better than the One X SGP protectors did on the One X. Doesn't look too bad at all.
I got the crystal clear and I have the same issue with the protector being too small. I know that this has been the case with some their other protectors, but I'm going to have to try some other brands. I can't stand it being cut off like this.
Sent from my Nexus 4 using xda app-developers app
Where did you get it from ?
juventuss said:
Where did you get it from ?
Click to expand...
Click to collapse
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
I got the oleophobic one in today from SGP, it doesnt cover the whole screen either. Better than nothing i guess for now.
I'm starting to have a huge distaste for the curved screens. Feels nice with the hardware buttons on my S3, but looks like utter garbage with a screen protector.
jackierobinson said:
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
Click to expand...
Click to collapse
The bumper does not cover it.
Also big warning for people looking to buy SGP: The light sensor is covered by this screen protector (not cut out like most) and it interfered with the functionality of the phone. In the past I've had screen protectors that went over the sensor without issue, but with this particular protector and phone, it did not work.
For example if i went to make a phone call, the screen would stay dark even if i took the screen away from my face. Also auto brightness didn't work either. I had to cut the film to expose the sensors. Everything is working normally now. Anyone else have this issue?
Also received mine today, dont have the phone yet though. Not feeling too happy about it already seeing as it doesnt cover the curved screen too well... Money down the drain then :s
Mine will arrive today and I plan to put it in a case so its not a big deal. The SGP on my Note 2 didn't go all the way to the edge either. A tpu case fixed that and everything was covered.
Sent from my Nexus 4 using Tapatalk 2
Good thing I waited. I am planning on using this phone with screen protectors only and I can't pay for a high quality one that looks pretty bad IMO.
Looks great. SGP never usually covers the entire front. It is always just a tad bit smaller.
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, I'm just hoping someone finds out a way to make t stick over the curved glass. I guess I am going to have to go with a wet screen protector.
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, but it stops way short of the curve. It literally just covers the display (width wise). They could have extended it a bit further. This is going to leave a gap, even with a TPU case on it.
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
NYConex said:
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Click to expand...
Click to collapse
I'm not sure how smooth the zagg HDs are, but right after you put the screen protector on, it is really tacky. But it gets much more smoother as you use it. I think that as you use it more, you're depositing more skin oils onto to screen protector and it kind of "seasons" the screen protector.
This sounds weird, but I just put a bunch of fingerprints on it, then I distributed it using a dry kimwipe (i'm sure a microfiber would work too) and after using it for about 24 hours, it's pretty much as slick as you would expect from the bare glass. Also, of course there is no orange peel feeling since this is a dry application screen protector.
ewuzh said:
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
Click to expand...
Click to collapse
they already emailed me back saying they don't have plans to make any.
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).