MIUI 7 Global Custom ROM
[WARNING : Rooting or installing a custom rom or recovery might brick your device or your device may act abnormally and you also lose the device warranty. You may even get a dead SD card which might not work or you can leave your device in a dead state. Before going through the entire tutorial please be advised that it is your own responsibility to go further. We’re not liable for any loss of data or any property of yours by any mean.]
What is it?
This ROM is developed by Xiaomi for their own phones. MIUI 7 is the latest one which uses Kitkat 4.4.4 as base. This ROM is created for RedMI and it's ported by a chinese developer(God bless). It's shared by the site techolaty.com.
Why should I install this ROM?
Because VIBE UI is pathetic, no offence.
What you will get in this ROM?
Clean
No Bloatware
Global Version, so no Chinese stuff
Optimized RAM usage
Themes
Camera sw is really good
Overall no lag at all
How does it look like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do I need to have to use this ROM?
GAPPS for Kitkat (4.4.2 or 4.4.4)
Custom Recovery (FlourMO, CWM, Phillz - Search XDA for more details)
If you don't have any idea on above two things, I strongly recommend not to proceed with this thread.
Where I can get those things?
GAPPS can be found here
Custom Recovery can be found (CWM), (PhilZ)
Download the ROM here.
How can I install this ROM?
Step 1 : Copy both the files to your SD card ( The MIUI 7 custom rom and the gapps which you’ve downloaded)
Step 2 : Boot into Recovery (Follow the guide to goto recovery)
Step 3 : Please take an entire backup of your current rom through the CWM menu. So that you can restore it back if you fail to install the Custom ROM
Step 4 : Enter recovery
Step 5 : Make full wipe including “system”
Step 6 : Flash the rom
Step 7 : Flash the gapps
Step 8 : Reboot (the first boot can take up to 2 minutes)
How can I thank you?
I just copy-paste-ed. Thanks to the unknown developer for the porting and to Veer Amrit Singh(techolaty.com).
Arabic language?
I flashed the rom, thx
Related
Xoplax Custom ROM is a pure and simple Android operating system based on CyanogenMod 12.1. This custom ROM comprises with a theme engine from CyanogenMod, optimized performance, it even consists a custom kernel with modern user interface and best experience. Download and install Xoplax Custom ROM for Lenovo A6000 and Plus which is based upon 64 bit CPU architecture running on Android Lollipop 5.1.1.
About The Rom
Android Verion : 5.1.1
ROM Version : 1.0
Type : CyanogenMod 12.1
Author/Credits : Xoplax
ROM Size : 347 MB
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Click to expand...
Click to collapse
Pre-Requisites
Lollipop pre-installed – Read the guide to upgrade to Lollipop here
TWRP Custom Recovery – Read the guide from here
Xoplax Custom Rom – Download it from here
GApps 5.1.x – Download it from here (select 64 bit version)
Features
Pre-Rooted
64 Bit
Display & Animations Tweaks
Scrolling effects
Toast animation
Toast icon
Heads up notification
Notification drawer
Status bar options
FC notifications
Lock screen colors
Selinux switch options
Gesture anywhere
Custom themes
How to Install Xoplax Custom Rom ROM
Copy the Xoplax Custom Rom and GApps in your SD card
Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the Bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Make full wipe including “system” (data, dalvik, system, cache)
Now go back, click Install and then click one level up
Flash the ROM and then the GApps
Reboot (the first boot can take up to 2-5 minutes)
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original article / Source: Techolaty.com
Techolaty.com | Lenovo A6000/Plus Xoplax Custom Rom 5.1
Can i flash this rom to lenovo s90u..because its same chipset??
A short guide on how to install the CLOSED BETA of Flyme os 5 on Meizu M2 Note (any version).
NOTE : On my experince the closed beta itself is a prety stable rom for day to day usage. Encountered no bugs till now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Needed:
Rom to flash (https://yadi.sk/d/YgsddeCAmn4CG) / https://docs.google.com/uc?id=0B3-qBmWz-c0tcE14NU83WG1UZW8&export=download
-FlashFire (Https://yadi.sk/d/YgsddeCAmn4CG)
-Root Permission (can be activated directly from your Flyme Account, Google for it )
I also made a video tutorial on the same,
Please check it out guys : https://m.youtube.com/watch?v=NlKucewzB7w
Method:
1. Get root permissions.
2. Copy the files in the internal smartphone "update5_wo_imei_preloader-signed.zip" previously downloaded.
3. Download and open the app FlashFire.
4. Grant root permissions the app.
5. Select "Flash zip or Ota" and from there select the file "update5_wo_imei_preloader-signed.zip" copied earlier in the internal smartphone.
6. Select "Wipe" and proceed with the wipe cache and Dalvik Cache. In doing so we will get an installation "dirty", means an update over the Rom that u had earlier, without losing anything. *
7. Wait until this process. DO NOT worry if it were to last more than 15 minutes, it is normal.
8. Enjoy!
* E 'recommended, after installation dirty, proceed with a complete cleaning of the smartphone for better performance.
Procedure performed on a Meizu M2 Note A converted version to 4.5.2 I. From my experience I guess the firmware is compatible with all Meizu M2 Notes. I take no responsibility for any damage and / or brick the device (which is still more impossible that rare). It 'always advisable to have a update.zip the original version installed on the device in its internal archive in order to restore in case of problems.
I also made a video tutorial on the same,
Please check it out guys : https://m.youtube.com/watch?v=NlKucewzB7w
Please hit thnks
Reserved Area
any one confirme ?
who uses this beta flyme?
[ROM] Pure CyanogenMOD 10.1 for karbonn A16
so now here i am again with new ROM for karbonn A16.
Last time is posted 4.4.2 based ROM.
now this time this is Pure CyanogenMod 10.1 for karbonn a16.
features.
It is pure CM so all features are according it.
dual sim support
camera wifi bluetooth nvram everything working fine
NOT rooted need to flash supersu separate.
NO gapps include....Need to flash gapps separate
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
requirements..
rooted device
CWM/CTR installed -----> guide to install CWM/CTR visit my blog or just google it
download firmware zip file ----> DOWNLOAD ROM
Download Gapps -----> Download Gapps
Download Super SU zip ------> DOwnload SuperSU
Method to flash it.
Put download all three zips in internal storage or external storage.
Reboot into recovery (volume up with power button)
do a factory reset...wipe data...wipe cache....wipe dalvik cache..
now install "A16_CM10.1_v1.2.zip"
now reboot.
when device rebooted now reboot into recovery again.
Now flash "gapps-jb-20130812-signed.zip" and reboot again.
when booted then again reboot into recovery to root your device.
now flash "BETA-SuperSU-v2.74-2-20160519174.zip" the third one.
Now final reboot
Enjoy CM
UPDATE V1.0
After above steps please flash this update zip,
This will add battery saver to your device
and add system clock also.
Download Update patch v1.0
and yes finally i ported Android 7.0 to Karbonn A16...
everything is working fabolus....Android 7 is looking gorgeous in karbonn A16.
just tweaking it and giving final touch, will release it within this week with final release.
stay tuned
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Presenting you a real AOSP 7.1 (SDK 25) for the DOOGEE Y6 smartphone. This ROM is very tiny. Making it easy to handle. That also makes it fast and battery friendly, compared to heavy ROMs.
Features
Android 7.1 (SDK 25)
Recent security patch (September 5)
Very small size
Good battery life
Fast
Stable
Stock Android
No bloatware
No lag
MiraVision support
Integrated fonts manager
Click to expand...
Click to collapse
Bugs
Potential weak signal on 4G/LTE networks.
If you find one, please fix it yourself.
Downloads
ROM: Light-AOSP-7.1.2_Y6_by_Nonta72.zip (Mega – 638.6 MB)
Nokia-Camera.zip
Google-Camera.zip
FIX_Wi-Fi_hotspot.zip
Installation
Make sure you are running an Android 7.x ROM (LineageOS 14.1 is not included). If not, download and install official 7.0 for DOOGEE Y6
Install TWRP for DOOGEE Y6
Boot from TWRP
Backup NVRAM and NVDATA just in case
Wipe data, cache, dalvik/art cache and system.
Install the ROM
Install either Nokia-Camera.zip or Google-Camera.zip. The integrated camera causes problems.
Reboot (First boot shouldn't exceed 10 minutes)
Done.
Click to expand...
Click to collapse
Notes
If you use the ROM for a certain time and wipe the data in TWRP, you will need to flash the whole ROM or you'll be stuck in bootloop.
You should use Buttons Remapper app to remap your left button so that it can launch Recent apps just like in Stock
In case of IMEI error or no signal, boot to TWRP and restore NVRAM and NVDATA backup.
Click to expand...
Click to collapse
Screenshots
Credits and thanks
Syed Ahmed Ali Shah
John Gothi
Sandeed Sethi
Irma Nasre
Riordan87 @ 4PDA
Anyone else who helped as well.
If you like my work, you can make a donation to me.
How to install?
I have a Doogee Y6 running Android 6.0 that came with the phone. Can you please write step-by-step instructions on how to root, then flash this ROM... this is for a newbie.
Thanks. Regards.
Hello, can i use it with Y6C model? Thank you
Hello World!
I have used Huawei Lua U-22 for somedays & flashed some CR there. I have used 3 rom from this post - Custom Roms For Huawei Y3II. Please kindly go to that post to get the download links.
Here, I am only posting some screenshots of those rom because main post didn't include them. Hope you'll 'njoy!
Aosp 5.1Android Open Source Project - AOSP. Another clean and responsive rom for Y3 Lua U-22. The only downside of this rom I think is the ringtone section. Existing ringtones are not that good. Consider using from other source.
I can't remember, but the rom is probably not pre-rooted. I have flashed magisk to gain root access.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you ❤
How to install the OS? Can you direct me to any thread
asiricot said:
How to install the OS? Can you direct me to any thread
Click to expand...
Click to collapse
Hi,
First of all, I am really sorry I didn't see you commented. Too late :/
Anyway, unfortunately I couldn't find any thread which will guide you how to install the rom. And there is a reason for this - installing a rom is self explanatory, and very easy. You'll need a custom recovery like TWRP. Then keep the rom file in your phone storage, boot the device in recovery mode, select the rom, & press flash. After finishing the installation, reboot device, you're done!
Here are some video for you to understand the situation:
Before that, you have to root your device of course, and unlock the bootloader. Here's a video for that too, if you didn't unlock your bootloader already:
BTW, don't try to install any rom that is not made for Huawei Y3 Lua U22. It may permanently brick your device. I tried to cross port a rom & flash it myself, and guess what? My device is no more :')
Have a good day!