[ROM][5.1.1][CM12.1] Xoplax Custom ROM 5.1 | Lenovo A6000/Plus - Miscellaneous Android Development

Xoplax Custom ROM is a pure and simple Android operating system based on CyanogenMod 12.1. This custom ROM comprises with a theme engine from CyanogenMod, optimized performance, it even consists a custom kernel with modern user interface and best experience. Download and install Xoplax Custom ROM for Lenovo A6000 and Plus which is based upon 64 bit CPU architecture running on Android Lollipop 5.1.1.
About The Rom
Android Verion : 5.1.1
ROM Version : 1.0
Type : CyanogenMod 12.1
Author/Credits : Xoplax
ROM Size : 347 MB
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Click to expand...
Click to collapse
Pre-Requisites
Lollipop pre-installed – Read the guide to upgrade to Lollipop here
TWRP Custom Recovery – Read the guide from here
Xoplax Custom Rom – Download it from here
GApps 5.1.x – Download it from here (select 64 bit version)
Features
Pre-Rooted
64 Bit
Display & Animations Tweaks
Scrolling effects
Toast animation
Toast icon
Heads up notification
Notification drawer
Status bar options
FC notifications
Lock screen colors
Selinux switch options
Gesture anywhere
Custom themes
How to Install Xoplax Custom Rom ROM
Copy the Xoplax Custom Rom and GApps in your SD card
Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the Bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Make full wipe including “system” (data, dalvik, system, cache)
Now go back, click Install and then click one level up
Flash the ROM and then the GApps
Reboot (the first boot can take up to 2-5 minutes)
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original article / Source: Techolaty.com
Techolaty.com | Lenovo A6000/Plus Xoplax Custom Rom 5.1

Can i flash this rom to lenovo s90u..because its same chipset??

Related

[ROM] [UNOFFICIAL] MIUI 7 for Lenovo a6000 /plus

MIUI 7 Global Custom ROM​
[WARNING : Rooting or installing a custom rom or recovery might brick your device or your device may act abnormally and you also lose the device warranty. You may even get a dead SD card which might not work or you can leave your device in a dead state. Before going through the entire tutorial please be advised that it is your own responsibility to go further. We’re not liable for any loss of data or any property of yours by any mean.]
What is it?
This ROM is developed by Xiaomi for their own phones. MIUI 7 is the latest one which uses Kitkat 4.4.4 as base. This ROM is created for RedMI and it's ported by a chinese developer(God bless). It's shared by the site techolaty.com.
Why should I install this ROM?
Because VIBE UI is pathetic, no offence.
What you will get in this ROM?
Clean
No Bloatware
Global Version, so no Chinese stuff
Optimized RAM usage
Themes
Camera sw is really good
Overall no lag at all
How does it look like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do I need to have to use this ROM?
GAPPS for Kitkat (4.4.2 or 4.4.4)
Custom Recovery (FlourMO, CWM, Phillz - Search XDA for more details)
If you don't have any idea on above two things, I strongly recommend not to proceed with this thread.
Where I can get those things?
GAPPS can be found here
Custom Recovery can be found (CWM), (PhilZ)
Download the ROM here.
How can I install this ROM?
Step 1 : Copy both the files to your SD card ( The MIUI 7 custom rom and the gapps which you’ve downloaded)
Step 2 : Boot into Recovery (Follow the guide to goto recovery)
Step 3 : Please take an entire backup of your current rom through the CWM menu. So that you can restore it back if you fail to install the Custom ROM
Step 4 : Enter recovery
Step 5 : Make full wipe including “system”
Step 6 : Flash the rom
Step 7 : Flash the gapps
Step 8 : Reboot (the first boot can take up to 2 minutes)
How can I thank you?
I just copy-paste-ed. Thanks to the unknown developer for the porting and to Veer Amrit Singh(techolaty.com).
Arabic language?
I flashed the rom, thx

[ROM][PORT] LewaOS™ For Yuphoria [64 BIT]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
LeWa OS, also called Music Frogs or жабка, is a third-party Android ROM produced by the Chinese company Lewa Technology.The ROM includes its own LeWa market, a power save mode, adjustable switches in notification bar, and some other modifications that are “optimized and localized” for Chinese users.
Lewa OS custom rom is running on 64 bit cpu architecture and can be installed using TWRP custom recovery, you can proceed to the downloads and instructions section below to directly install the new custom rom and enjoy the features and smoothness.
Note
Wait for about 20 minutes after installation for ROM to get settled.
Gapps are included.
This ROM is 64 Bit.
Rom take about 6 minutes to boot first time.
Features
Explore them.
Bugs
Wifi.
Not asking for any donations but please Don't forget to hit that Thanks Button. Its free and means a lot.
Download Link :
LewaOS™ For Yuphoria : https://www.androidfilehost.com/?fid=457095661767159819
Flash this kernel after ROM to make it Boot : https://www.androidfilehost.com/?fid=24391638059060181
Flash this for fixing audio : https://www.androidfilehost.com/?fid=817550096634768191
Requirements
1- Unlocked Bootloader.
2- Custom Recovery installed.
How to Install
Download the latest build of LewaOS.
Reboot to TWRP Recovery
Wipe data, system, cache and dalvik cache.
Flash the LewaOS.
Flash Audio patch to fix audio.
Flash any LP based kernel. [Velocity Old V10.3 Recommended].
Reboot (It may take up to 6 mins for the first boot.)
Enjoy !
Sources
Kernel source: https://github.com/CyanogenMod/android_device_yu_lettuce/tree/cm-12.1
Credits
Huge thanks to YU Televentures.
Special Thanks To LewaOS Team.
Special thanks to Nitesh Prasad.
Speacialy thanks to sid2603 for asking to Port this ROM.
Special Thanks To innfinite4evr On XDA.
Yu Members who supported me.
DevDB Information
LewaOS™ ROM [ARM 64] for YU5010 and YU5010A
ROM Information
ROM Developer: Gaggu Aka Pawan
ROM OS Version: 5.1.1 Lollipop (ARM 64)
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0.x/5.1.x and up (ARM64)
Based On: LewaOS
Version Information
Status: Stable
Current Stable Version: LewaOS™ v1.0 Beta ROM
Release Date: 09.05.2017
Do leave a thanks if you liked it
Screenshots
HIT THE THANKS BUTTON AND PROCEED.
Stuck in android booting......
After flashing stuck in android image, i am wait approximately 1 hour but not installed successfuly.
pchoureyap23 said:
After flashing stuck in android image, i am wait approximately 1 hour but not installed successfuly.
Click to expand...
Click to collapse
Did you flashed velocity kernel with it ?

[Prime Rom 2.2 ] Install 6.0.1 Marshmallow In Galaxy Grand Max [Sm-7202] [Stable]

SAMSUNG
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So once again Hello Everyone! I'm back again with another rom which is one of the Most Wanted ROMs for Galaxy Grand Max. Yes The Marshmellow for G7202 is here with everything fixed nd working. The rom was ported but there were some glitches still left which kept it away from Daily Usage so now I, after a long time fixed all those bugs, performance & battery drain.
Please Read The Whole Thread, Second & Third Post Before Talking About Anything!
Some Features:
* Deodexed
* Deknoxed
* Zipaligned
* Rooted
* Busybox Pre-Installed
* Fix reading and writing memory cards
* Added CSC Features.
* Created "Call" button in the call log
* Taking the camera even when calling
* Recording a conversation by regular means (icon in the dialer)
So What's Working?
WiFi/Hotspot
Bluetooth
Camera
Dual Sim
In-Call Voice
Led Torch
Sensors
INSTALLATION GUIDE
1. I dare you to take a complete backup of your ROM nd data.
2. Download Nameless J5.zip.
3. Reboot to recovery.
4. Format System, Cache, Data & Dalvik Cache
5. Install the ROM.
6. Reboot.
Please be patient first boot will take sometime.
Downloads:
Prime Rom 2.2 :- https://drive.google.com/open?id=1sLko1dqaxyZQ_keoR1wSJe6MZ3r_COlc
Guide Video :- https://youtu.be/BdJfJyp5vAE
TWRP Recovery download :- https://drive.google.com/open?id=1T-AKnS2wcF3LmwWzj9I42KAU_JOta4J6
TWRP Recovery Guid video :- https://youtu.be/qtGabvwwF7w
Bugs:
Sound
Thanks To:
@aasyad kitchen
@Chainfire for SuperSU.
@hybrid developers
Make Sure You Press Thanks If You Like This Work.
XDAevDB Information
Prime ROM v2.2 for the Samsung Galaxy Grand Max
Contributors
mayurisakhale
ROM OS Version: 6.0.x Marshmellow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Twrp
Based On: TouchWiz
Version Information
Status: Stable
Current Stable Version: 2.2
man i cant open the google drive. can u help me pls. i badly need to update my galaxy grand max to atleast android 5. help me please
the link is dead.

[ROM][UNOFFICIAL][land] crDroid Android v4.7.2 [8.1.0][NON-TREBLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid Android for Xiaomi Redmi 3S/Prime/3X
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!​
Features
click n see
Downloads:​
ROM
twrp
Gapps
First time installing crDroid to your Redmi 3S, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
special thanks to:
-Mr.Hackerman
- - crDroid Team
- Google
- LineageOS
- Difr (for his sources)
Sources:
[url]https://github.com/crdroidandroid[/URL]
[url]https://github.com/difr[/URL]
Contributors
Myself , shaik luman
ROM OS Version: 8.x Oreo
Based On: CyanogenMod
Created 2019-06-13
Reserved
Based on cyanogen does it mean it support cyanogen theme engine or not? Sorry lol?
Thread cleaned
If you have bugs and issues
Verify you have done a clean flash
Do not restore anything
Verify the bugs and pull a logcat
Zip up the logcat and send to the developer
Any disrespectful posts will be removed and offender treated severly
This is a development site and developers are supported!!!
Thank you for your cooperation
Cm theme is dead n it is not present there, instead crdroid provide its own theme engine , its buggy though (source problem ) i have asked for it in the crdroid community but they said that "oreo is no longer supported"

[ROM][11.0][UNOFFICIAL][MONTHLY] crDroid v7.x [A001D]

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Always Have a full functional Backup. Just in case!
BUILDS
DOWNLOAD GAPPS
First time installing crDroid to your Zenfone Max Shot and Plus M2, or coming from another ROM:
** Make sure you're running the latest TWRP Treble Recovery
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash gapps
6) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Donate
Liked my work? Give me a coffe
Sources:
Kernel - https://github.com/GuilianoS/kernel_asus_A001D
ROM - https://github.com/crdroidandroid
Contributors:
@GuilianoS
@mathpfvr
ROM OS Version: 11 R
ROM Kernel: Linux 3.18
ROM Firmware Required: Unlocked Bootloader
Based On: Lineage OS
Version Information
Status: Stable
Stable Release Date: 2020-01-16
Thanks for sharing

Categories

Resources