HI everyone.
Sorry for the second post in a few days, but this is an annoying issue
I have a verizon galaxy s6, and I am currently living in Belgium, using belgian sim (carrier BASE). I don't think this issue is unique to the country or the carrier.
The problem I am having is that when I receive a text message from a belgian number, the number that shows on my phone has the country code: +32 xx xxx xxxx. I can get text messages like this, but when I try to reply, the message fails. (this has happened on every number ive tried to respond to.) The only way I can get my texts to send is by making the number into a new contact, and removing the +32 country code. The same goes for when i'm trying to call, I have to remove the country code, if I keep it, the call fails. I've tried turning on and off assisted dialing, and I did a factory reset on my phone. Ive tried dialing US numbers and they have also failed, so it's not forcing the +1 country code on my numbers while calling either.
This is a huge pain, because it forces me to make a new contact for every single new number, even if its not a number I need/want to keep, and go in and adjust it manually.
Thanks for the help, it's very appreciated.
I have the same issue in Albania...i belive you ! It's a very a anoying matter , from that moment i have editet all the numbers i frequently call or text..!
chpv said:
HI everyone.
Sorry for the second post in a few days, but this is an annoying issue
I have a verizon galaxy s6, and I am currently living in Belgium, using belgian sim (carrier BASE). I don't think this issue is unique to the country or the carrier.
The problem I am having is that when I receive a text message from a belgian number, the number that shows on my phone has the country code: +32 xx xxx xxxx. I can get text messages like this, but when I try to reply, the message fails. (this has happened on every number ive tried to respond to.) The only way I can get my texts to send is by making the number into a new contact, and removing the +32 country code. The same goes for when i'm trying to call, I have to remove the country code, if I keep it, the call fails. I've tried turning on and off assisted dialing, and I did a factory reset on my phone. Ive tried dialing US numbers and they have also failed, so it's not forcing the +1 country code on my numbers while calling either.
This is a huge pain, because it forces me to make a new contact for every single new number, even if its not a number I need/want to keep, and go in and adjust it manually.
Thanks for the help, it's very appreciated.
Click to expand...
Click to collapse
Hi, I'm from Argentina and have had the same issue with sms. In my case, I was able to send sms but cannot reply because the messages comes with +54 (My country Code) before the line number. After 2 weeks claiming to the carrier (Personal), the problem was fixed changing the SIM CARD for a new one. I Hope this can be helpful for you.
Regards.
Martin
Related
Hi, I live in Brazil, and recently I've moved from one state to another.
I had to change my chip and ever since I keep receving the same text message.
It says "VIVO RJ 21" , where VIVO is the carrier, RJ is the state and 21 is the area code from my cell.
The problem is that I don't think it is a text message. It looks like a netwok message, because there is no number to call back or anything. Usually when you receive a message from the carrier it has a number, that does not work to call back, but ther is one.
Has anyone had this and solved this?
thomazff said:
Hi, I live in Brazil, and recently I've moved from one state to another.
I had to change my chip and ever since I keep receving the same text message.
It says "VIVO RJ 21" , where VIVO is the carrier, RJ is the state and 21 is the area code from my cell.
The problem is that I don't think it is a text message. It looks like a netwok message, because there is no number to call back or anything. Usually when you receive a message from the carrier it has a number, that does not work to call back, but ther is one.
Has anyone had this and solved this?
Click to expand...
Click to collapse
Guess you need to check up some settings in your phone. AFAIK it's called 'Cell Broadcast' ....
Dirk
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
So my phone is the HTC J Butterfly 2 (HTL23) from Japan. I am on EE network in UK. Whenever I text someone, if the number format does not include a prefix i.e. does not have +44 then the message goes through fine. However if the number does have the prefix then I get the error message:
Sorry, the number you are sending to does not contain the correct number of digits.
I've tried using many difference SMS apps, but all come back with the same error message (figures, as everything goes through the EE network regardless of app). I have spoken to EE and they say there's nothing that they can do. I do not get this problem with phone calls.
Can anyone help me to fix this? I think it may have something to do with the fact that this Japanese phone still thinks it's Japanese- need to try and convince it to be English!
Any help appreciated.
Hello all,
I'm unsure about where to post this issue I am having with my handset. Let me explain a little about what is going on, and maybe someone can redirect me to where I should post the full details and hopefully get some answers
Have a Huawei C8813 Handset from China. It was payment for a computer job I did some time ago. I suspect it was a contract phone of some description, however it was completely wiped when I received it.
I had to perform some build prop edits in order to get it working on 2 Degrees here in New Zealand. These involved (ro.cdma.home.operator.numeric=53024) and other related lines.
The issue I am having at the moment is that when I receive calls from other cellphones in New Zealand, they come through with no International prefix (this is fine, and desired). However text messages I receive from NZ cellphones come through with the International prefix. So if I were to receive a call from 022022022, it would come through as such, but a text message from the same number would appear on my handset as +6422022022. This causes me to attempt to enter both the prefixed and non prefixed numbers into every entry in my address book. Text messages will send fine to either the prefixed or non-prefixed number, but this causes message thread separation (undesired).
Further to this, if I make calls to a non-International-prefixed number (a local New Zealand cellphone) eg 022022022, I get a dialog up titled ""Yi Dialer" (China +86)" with the following options: "Call China (International Roaming Call)", "Call China (**133 call back)", "Call other country", "Call local". Obviously the call goes through fine if I select "Call local". However, if I put the international prefix in front of the number for NZ (+64,) calling a number in NZ, it bypasses "Yi Dialer" altogether and just makes the call eg: +6422022022.
I have searched the internet far and wide and can find very little related to "Yi Dialier" (or "easy dialer" if translated from Chinese). I have checked out all of the stock applications that came with the phone and none appear to be related to dialing.
I am interested in perhaps a build.prop or similar setting that may erase this issue and make the phone believe it is based in New Zealand. As far as I can work out, the handset thinks it is roaming all of the time, when in fact it is not. There is no convincing it of this through regular Android settings with regards to the carrier or cellphone network.
Any help or direction with this would be greatly appreciated. I am happy to provide screenshots and exact build.prop edits I have done to make the phone operate here in NZ.
Thanks in advance,
Mike
MikeNZd4d said:
Hello all,
I'm unsure about where to post this issue I am having with my handset. Let me explain a little about what is going on, and maybe someone can redirect me to where I should post the full details and hopefully get some answers
Have a Huawei C8813 Handset from China. It was payment for a computer job I did some time ago. I suspect it was a contract phone of some description, however it was completely wiped when I received it.
I had to perform some build prop edits in order to get it working on 2 Degrees here in New Zealand. These involved (ro.cdma.home.operator.numeric=53024) and other related lines.
The issue I am having at the moment is that when I receive calls from other cellphones in New Zealand, they come through with no International prefix (this is fine, and desired). However text messages I receive from NZ cellphones come through with the International prefix. So if I were to receive a call from 022022022, it would come through as such, but a text message from the same number would appear on my handset as +6422022022. This causes me to attempt to enter both the prefixed and non prefixed numbers into every entry in my address book. Text messages will send fine to either the prefixed or non-prefixed number, but this causes message thread separation (undesired).
Further to this, if I make calls to a non-International-prefixed number (a local New Zealand cellphone) eg 022022022, I get a dialog up titled ""Yi Dialer" (China +86)" with the following options: "Call China (International Roaming Call)", "Call China (**133 call back)", "Call other country", "Call local". Obviously the call goes through fine if I select "Call local". However, if I put the international prefix in front of the number for NZ (+64,) calling a number in NZ, it bypasses "Yi Dialer" altogether and just makes the call eg: +6422022022.
I have searched the internet far and wide and can find very little related to "Yi Dialier" (or "easy dialer" if translated from Chinese). I have checked out all of the stock applications that came with the phone and none appear to be related to dialing.
I am interested in perhaps a build.prop or similar setting that may erase this issue and make the phone believe it is based in New Zealand. As far as I can work out, the handset thinks it is roaming all of the time, when in fact it is not. There is no convincing it of this through regular Android settings with regards to the carrier or cellphone network.
Any help or direction with this would be greatly appreciated. I am happy to provide screenshots and exact build.prop edits I have done to make the phone operate here in NZ.
Thanks in advance,
Mike
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here*http://forum.xda-developers.com/android/help*where you can get better help and support if you try to ask over there.*
Good luck.
I cant find where to post this, this website changed so much, but it was on my new s22 ultra so....
I got a call from "NONE" the 'number' beneath it was "NN".
No voice on the other side, and I attempted to called back. Then my phone popped up a little message near the bottom of the screen... "USSD Code Running."
It kinda freaked me out. What does that mean?
Do a Google search on "USSD Code Running". A lot of info comes up.
oh my...
Which code was it?
daveyp225 said:
I cant find where to post this, this website changed so much, but it was on my new s22 ultra so....
I got a call from "NONE" the 'number' beneath it was "NN".
No voice on the other side, and I attempted to called back. Then my phone popped up a little message near the bottom of the screen... "USSD Code Running."
It kinda freaked me out. What does that mean?
Click to expand...
Click to collapse
I've seen this kind of behavior when I've had the phone in my front pocket, and I happened to be sweating. The sweat carried the electrical signals in my skin through the pocket liner (I'm no scientist, just my running theory) to the screen and thus, randomly unleashing all sorts of weird mayhem and shenanigans.
It's either that or gremlins.........
Happened again, check the recording
Probably just a harmless rootkit...
For whatever reason it's probably just the way that phone responds to some unknown numbers with no caller ID. I block unknown numbers, try that.
Freaky.
Can you block the call?
I don't call back unknown numbers.
Off topic -
Noticed that Samsung added a feature in Samsung Messaging that allows users to block e-mail messages.
its an Aliens
It is mostly likely a SPAM caller. There are automatic dialing apps that can either spoof a number, or completely hide the number, which makes it difficult to block.
I'm have Verizon and it has a Call Filter app. Check with your provider if it has a call filter app. You can also find third party call filtering apps.
Unfortunately, dealing with SPAM and scam calls is a game of Wack-a-mole.
gernerttl said:
It is mostly likely a SPAM caller. There are automatic dialing apps that can either spoof a number, or completely hide the number, which makes it difficult to block.
I'm have Verizon and it has a Call Filter app. Check with your provider if it has a call filter app. You can also find third party call filtering apps.
Unfortunately, dealing with SPAM and scam calls is a game of Wack-a-mole.
Click to expand...
Click to collapse
It just dialed NN corresponding to 66 which triggered a USSD code.
dadmi said:
It just dialed NN corresponding to 66 which triggered a USSD code.
Click to expand...
Click to collapse
Yeah...don't call those kinds of numbers back. If something like that comes up, or you get a blocked number. Let it go to voicemail. If they leave a voicemail, fine. If not, don't call it back.
It is possible someone was trying to run a Smishing scam on you. With the aim to hijack your SIM and take over your phone service account. Depending on your carrier, the USSD code could trigger your device to do something you don't want it to do.
daveyp225 said:
Dave
Click to expand...
Click to collapse
daveyp225 said:
I cant find where to post this, this website changed so much, but it was on my new s22 ultra so....
I got a call from "NONE" the 'number' beneath it was "NN".
No voice on the other side, and I attempted to called back. Then my phone popped up a little message near the bottom of the screen... "USSD Code Running."
It kinda freaked me out. What does that mean?
Click to expand...
Click to collapse
Dave
I do it short and quick :
The mobile Phone number of your simcard
Has now call forwarding active to the Hackers Server (ussd MUST bei activated by the victim/target. Hacker need the victim to call a 10 Digits number that will Route to His Server)
Its a curently Well known Hack ... (Thus Person was smart enough to hide His 10 Digits number ... Well played good trap)
What the attacker wants... example :
Get into all your Accounts that are secured with YOUR PHONE NUMBER
...WhatsApp Google ... An E-Mail Account ? Etc etc
So...
I dont believe IT was random Attack.
Someone who know how or someone who ordered this
Knows you ... And need to dive into your privates
(thats childplay Hacking from YouTube nothing unknown or hard to do)
Good News : Sometimes ...someone Else is "the target" .... So the attacker needs informations Out of your device and apps....to get information about the Others real Targets Phone number ... in that Case your device/Accounts need to be Hacked or hooked or jacked ....
If your simcard is older than 5-8 years ...Hmmm
Maybe the simcard still use [email protected] browser. (A Browser placed inside your simcard)
Get rid of such a simcard too. Better Sirius lee
Change ur simcard Phone number for ur savety.
But
do it by EVEN changing the mobile Network Provider. (Best in Case If u have an old jackable simcard)
Sad fact : If the Hacker has enough informations from your simcard u need to Change the Provider. Because ... Your Provider maybe gives u a Brand new simcard ... With a new number that u ordered (the Service to Change Phone number to a new one) ... But ... The new number ist the only Thing what Changed all other leaked informations will stay the same as an act of keeping your customer number in the customer Care systems.
U need new customer number or Change the Provider + new number
My Tip: Use a Landphone number as a WhatsApp number ^^ need to recieve calls to activate the new WhatsApp Account so No Premium SMS Hack possible.... its More save
And ... U can start new the new start is : never leak ur simcards original mobile Phone number. Not in those days. Use the original simcard Phone number to Order pizza or a taxi. Give IT to No one and u dont need to Clean everything... Like u need to do NOW
gernerttl said:
Yeah...don't call those kinds of numbers back. If something like that comes up, or you get a blocked number. Let it go to voicemail. If they leave a voicemail, fine. If not, don't call it back.
It is possible someone was trying to run a Smishing scam on you. With the aim to hijack your SIM and take over your phone service account. Depending on your carrier, the USSD code could trigger your device to do something you don't want it to do.
Click to expand...
Click to collapse
Jupp thats so obvious ... The trap was better than call the target and please the Person to dial the number that activates the call forwarding Code that waits on a Server
Sim jacking needs the [email protected] Browser in the simcard. Needs to be an old one. Network Provider dont sell new regular simcards with the [email protected]
And dave wouldnt know that an invisible SMS with Codes reached his SMS Inbox :/
No need to call him in that case ... Just send the right prepared SMS and Game over
Puma Rawker said:
Dave
I do it short and quick :
The mobile Phone number of your simcard
Has now call forwarding active to the Hackers Server (ussd MUST bei activated by the victim/target. Hacker need the victim to call a 10 Digits number that will Route to His Server)
Its a curently Well known Hack ... (Thus Person was smart enough to hide His 10 Digits number ... Well played good trap)
What the attacker wants... example :
Get into all your Accounts that are secured with YOUR PHONE NUMBER
...WhatsApp Google ... An E-Mail Account ? Etc etc
So...
I dont believe IT was random Attack.
Someone who know how or someone who ordered this
Knows you ... And need to dive into your privates
(thats childplay Hacking from YouTube nothing unknown or hard to do)
Good News : Sometimes ...someone Else is "the target" .... So the attacker needs informations Out of your device and apps....to get information about the Others real Targets Phone number ... in that Case your device/Accounts need to be Hacked or hooked or jacked ....
If your simcard is older than 5-8 years ...Hmmm
Maybe the simcard still use [email protected] browser. (A Browser placed inside your simcard)
Get rid of such a simcard too. Better Sirius lee
Change ur simcard Phone number for ur savety.
But
do it by EVEN changing the mobile Network Provider. (Best in Case If u have an old jackable simcard)
Sad fact : If the Hacker has enough informations from your simcard u need to Change the Provider. Because ... Your Provider maybe gives u a Brand new simcard ... With a new number that u ordered (the Service to Change Phone number to a new one) ... But ... The new number ist the only Thing what Changed all other leaked informations will stay the same as an act of keeping your customer number in the customer Care systems.
U need new customer number or Change the Provider + new number
My Tip: Use a Landphone number as a WhatsApp number ^^ need to recieve calls to activate the new WhatsApp Account so No Premium SMS Hack possible.... its More save
And ... U can start new the new start is : never leak ur simcards original mobile Phone number. Not in those days. Use the original simcard Phone number to Order pizza or a taxi. Give IT to No one and u dont need to Clean everything... Like u need to do NOW
Click to expand...
Click to collapse
not gonna lie, this freaked me the fu*k out lol