Help me save my Xoom Stingray - Xoom Q&A, Help & Troubleshooting

Its in perfect shape and I need to get it going for work. I have CM10.1 on it and stupidly did a factory reset on it Now im getting the AOSP keyboard error and cant input anything. I tried to get it into the recovery by doing power and the down button but it just sits at starting fast boot support and Motorola logo.
Can you help me save her?

Anyone Please???

Power off + volume up to restart.
Touch nothing, when logo appear wait 3 sec. and push volume down to see recovery mod and push volume up

Thanks Pots I got into recovery, Any idea how I overcome the no keyboard issue

Reinstalled CM10 and keyboard issue is fixed, I dont have a copy of Gaps for this rom. is there one still available ?/ Im close to saving her

Here: https://www.dropbox.com/s/n8rcdjkng8g5xq6/gapps-jb-20130413-EOS-XOOM-ONLY.zip?dl=0
Working on EOS and Cyanogenmod 10

Dude you Rock!! Donation on the way.

Related

[Q] Help for my Huawei Ideos U8150

Hi all,
I was trying to install a new Rom Dronix 0.4. Upon entering the bootloader I accidentaly somehow no idea how,deleted clockwork mod recovery that was on there and now just can't get into bootloader mode or even get my phone to start up past the 1st screen.I've tried volume up +green button and power button to try to get in,volume down + end call red button and power button no go.The only thing it goes into is if I hold the volume down button + call green button and power which takes me to the firmware update but just flashes and says unpack failed.The other thing is that if press the red and green buttons for calls and the power button it brings the screen to a purplish colour but does nothing as well.I've tried to get the computer to recognize the phone but it won't even after installing the usb drivers with windows xp and windows 7.Atm there is no ROM on the phone after deleting it,cache and dalvik cache. It's just empty with not even a bootloader to try and boot into, only hardware is available now.
I'm at a loss as to what and any help if trying to get it back and running would be appreciated.
Thanks,
Paul
Flash UltraJack recovery from the PC.
http://forum.xda-developers.com/showthread.php?t=908178
hello, i think you kinda deleted the boot!!
try following instructions on this
http://forum.xda-developers.com/showthread.php?t=1011527
ITS SAYS UPDATE FAILS CUASE YOU DONT HAVE THE FIRMWARE on YOUR SD CARD>>>DO YOU???? JUST GO TO THEAD AND FOLLOW INSTRUCTIONS AND LET ME KNW!
YOU SIR ARE A CHAMPION!!!!!!!! If ever you are in Sydney, Australia I'll be treating you a few beers if you do drink heh.
Again THANK YOU!!!!

[Q] Can't get into CWM recovery after installing MIUI 1.9.23

This post belongs to http://forum.xda-developers.com/showthread.php?t=1278053 but since I don't have enough posts to reply there, here's my issue.
On my Infuse 4G I had Serendipity VII, then flashed over MIUI 1.9.23 which I downloaded from the abovementioned thread. Backed up rom, wiped data and cache, rebooted all good. But when it comes to enter into recovery to flash the MIUI zip again (as per the instructions at the thread above), my phone is stuck at the "Samsung" logo.
Tried battery pull, various hardware button combos, no luck so far. What is the correct hardware button combination to get into CWM from boot? I thought it was volume up + power on, but that didn't work. Tried volume up + home button + power on, no luck either.
So as of now... I'm with a dead Infuse.
Any help would really be appreciated
Thanks!
- Adriano
Same here, I can't even get into the blue CWM recovery. If I don't hold any buttons the phone will go into MIUI like normal but I want to get into recovery to backup and restore.
for me it's even worse... my phone is stuck at the Samsung logo.
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Sent from my SGH-I997 using XDA Premium App
I've tried going into Rom Manager and re-flashing recovery for the "Galaxy S i9000" and it says it's successful but I still can't get into recovery.
So I do have a working MIUI phone but now I seem to be stuck on this ROM
florelui001p said:
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
thank you so much! followed your instructions and now I'm in CWM... reflashing...
Kernodle said:
I've tried going into Rom Manager and re-flashing recovery for the "Galaxy S i9000" and it says it's successful but I still can't get into recovery.
So I do have a working MIUI phone but now I seem to be stuck on this ROM
Click to expand...
Click to collapse
ROM Manager's recovery is worthless...
Use the instructions given above for the three-finger-salute in order to enter kernel recovery.
Entering recovery from boot can be tricky sometimes.
Sounds like Mikey somehow broke the "reboot recovery" command.
Entropy512 said:
ROM Manager's recovery is worthless...
Use the instructions given above for the three-finger-salute in order to enter kernel recovery.
Entering recovery from boot can be tricky sometimes.
Sounds like Mikey somehow broke the "reboot recovery" command.
Click to expand...
Click to collapse
Yeah I've 3 fingered about 10 times now, pulled battery, tried rebooting into recovery from MIUI power menu and from RM menu, made sure to wait for the second SAMSUNG to appear, etc but still have not been able to get into CWM recovery. The logo just stays up forever.
Dang I don't really want to Odin back to stock anyone have thoughts as to how I can get this fixed?
Took me awhile to figure it out, I'm on Miui too and recovery works just fine.
This is what you should be doing:
1. Hold all the buttons down. (Volume Up + Down + Power)
2. When you see the Samsung logo, let go of the power and keep holding both volume buttons until you get into CWM.
himynamesnoah said:
Took me awhile to figure it out, I'm on Miui too and recovery works just fine.
This is what you should be doing:
1. Hold all the buttons down. (Volume Up + Down + Power)
2. When you see the Samsung logo, let go of the power and keep holding both volume buttons until you get into CWM.
Click to expand...
Click to collapse
Yup. Same works for any CWM-enabled kernel back in Samsung-firmware-land.
Ok well I got this fixed ghetto style.
I used SGS kernel flasher to put the Bedwa gingerbread kernel, then after reboot the female robot voice said there was not enough space in the partition.
However, at this point I was [finally] able to 3 finger my way into CWM - the red one, not the blue that MIUI was showing, and from there I could reinstall Infused from the SD card. Still no idea why the MIUI kernel would not let me into recovery!
ok figured to let you guys know how did it go for me after I was able to boot into CWM (thanks again florelui001p for the tip btw) -- was able to flash MIUI and after the reboot things went fine.
Played a bit around with MIUI (first time I was trying an MIUI rom), didn't quite like the complete reskinning of the plain vanilla android UI (don't get me wrong, the quality and amount of the work that must be behind MIUI is impressive, it's just me that I prefer things more "barebone" style).
So after my brief experience with MIUI, I tried to restore a couple of CWM rom backups I took earlier today -- and CWM was unable to restore either one... sweet. So I went for flashing the latest Infused (as of now) 2.3.3 -- and no surprise there. A great rom for the Infuse. So far with the Infuse aside from the stock rom, I've been on Infused, Serendipity VII and MIUI. Still hoping/waiting for CM7... used to love it on my old Nexus One.
- Adriano
adri72 said:
ok figured to let you guys know how did it go for me after I was able to boot into CWM (thanks again florelui001p for the tip btw) -- was able to flash MIUI and after the reboot things went fine.
Played a bit around with MIUI (first time I was trying an MIUI rom), didn't quite like the complete reskinning of the plain vanilla android UI (don't get me wrong, the quality and amount of the work that must be behind MIUI is impressive, it's just me that I prefer things more "barebone" style).
So after my brief experience with MIUI, I tried to restore a couple of CWM rom backups I took earlier today -- and CWM was unable to restore either one... sweet. So I went for flashing the latest Infused (as of now) 2.3.3 -- and no surprise there. A great rom for the Infuse. So far with the Infuse aside from the stock rom, I've been on Infused, Serendipity VII and MIUI. Still hoping/waiting for CM7... used to love it on my old Nexus One.
- Adriano
Click to expand...
Click to collapse
No problem! Glad to see you got everything up and running
Sent from my SGH-I997 using XDA Premium App
i've tried all the things u said but no success. then i've tried to enter download mode and after going to recovery with vol up + home + phone worked
Three finger does still work in MIUI/CM7, but it seems REALLY finicky for some reason.
Entropy512 said:
Three finger does still work in MIUI/CM7, but it seems REALLY finicky for some reason.
Click to expand...
Click to collapse
I've never had a problem. Here's a trick I use to get into recovery "100% of the time, every time":
Make sure your phone is unplugged from any charger/USB. Remove, and replace your battery. Place your phone on it's side, volume buttons down, on a desk/table. Press down until you feel the volume buttons depressed, and keep holding the phone with pressure. Press and hold the power until you see the Samsung logo, keeping your phone mashed against the table. When you see CWM, you can release the pressure on your phone, reconnect to cables, do whatever.
After flashing 1.9.30, I cannot access clockwork recovery from ANY method, 3 finger salute won't work, trying from MIUI won't work, reflashing clockwork from ROM manager won't work.
What am I suppose to do?
Have you tried the steps below?
florelui001p said:
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Click to expand...
Click to collapse
The caveat is to wait for the second time the Samsung logo appears, and then release all buttons.
- Adriano
this worked for me.
LG_iiNsTiiNcT said:
Okay so if you were one of the few people who lost recovery for some weird reason "ME" no need to unbrick to stock and re-flash I have a solution.
1: Download sgs kernel flasher
2: Download CWM community kernel
3: Flash kernel via sgs kernel flasher "unchecked the reboot button" when done flashing turn phone of "SHUTDOWN"
4: 3 finger until the Samsung logo pops up keep holding the buttons the screen will go black then Samsung logo will come up, let go of the power button and keep hold the volume up and down buttons "For about 20 seconds" then let go it should boot into Red CWM after a few seconds.
5: Go to install zip from SD card go all the way down and run update.zip it will boot back into RED CWM run update.zip again and it should now boot into GREEN CWM
6: From here Re-Flash MIUI "New Release would be smart", Wipe Fact,Wipe Cache, Wipe Dalvik, Flash, reboot at sign of Samsung logo pull battery, 3 finger into blue recovery and flash again.
7: Presto you should be set and have recovery back.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
I posted a fix in the main MIUI thread. Also copied above!
Sent from my SGH-I997 using xda premium

[HTC Rezound] White Screen!

Ok so I was installing a new rom (specifically ineffabilis-ics-alpha-rezound)using clockworkmod and everything went smoothly until I had to reboot the phone well I found out i needed to change the boot.img through fastboot but the problem is I cant reach any recovery menus I have tried taking the battery out and putting it back in and holding the power button and up on the volume rocker but nothing happens I need all the help I could get this thing wasn't cheap and I want to prevent it from becoming a paperweight help would be greatly appreciated.

[Q] Help Nexus S Totally Bricked!

Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Knightsage said:
Please help if you can, would really appreciate, dont know how to unbick my totally F$$$$### Nexus S Phone.
Even in recovery/fastboot mode on my Nexus S (Vol up+power), I cannot get my system to recognize the device....in fact, even in Windows, I am not able to get the system to recognize my device in Recovery mode/Fastboot mode....the only way it will recognize the device is if it is turned on the normal way, and hangs on the "Google unlocked icon" screen.
Some background info:
My power button recently stopped working...I thought it had to do with the fact that I updated NexusTools (was running a CyberGR rom...cant remember the name...had V4 Ultimate in it (downloaded from Rom Manager)).
So what I did was download/install (from the same developer) their hybrid ics rom....that did not brick it...but it also did not fix the power button...so after not liking the new rom, and the fact that it didnt fix my power button, I reflashed to the original rom I had installed (wiped everything, including doing a factory reset), and it just hung on "Google unlocked icon"
Now my phone does the following:
- First of all, the only way to power the device up is to plug it in (it automatically turns on and tries to boot without me pressing the non-functional power button)
- If I let it try to boot, it infinity hangs on the Google unlocked icon screen
- If I boot into recovery (by holding vol up button and plugging the phone into a power source), it hangs on the recovery screen...meaning the power button, as well as the volume buttons, as well as any buttons are non responsive.
- If I boot into recovery, the device doesnt even register on my system....
What am I doing wrong? What can I do to try and fix this?
I would truly appreciate if anyone reading this has some insights for me.
THANKS!!
Click to expand...
Click to collapse
yes, sounds like a dead power button(i have one myself).
try going back into your recovery, do a full data wipe(factory reset), then reflash the rom(and gapps). if still nothing, redownload the rom and try again. in your recovery, there is an usb option. use it to transfer your newly downloaded rom from your computer to phone.
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Knightsage said:
Once I am in recovery mode it "freezes" though...as in not even the volume buttons work...they worked fine before, and even work to get into recovery mode...but once there they no longer work...nor does connecting the device in recovery mode to my laptop....so im kind of at a loss, as I cant even use Fastboot/adb to wipe/push anything on the Nexus S through my laptop
Click to expand...
Click to collapse
im guessing that your using cwm recovery?
give your phone a few smacks on the back near the power button, your phone thinks its being pressed in.
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Weird...so i "smacked" the phone a bit...when I do it in recovery mode, it reboots the phone into recovery....so it definitely thinks its being pressed down constantly...but I have found no way to make it "un-pressed"...only briefly by smacking it...
Knightsage said:
yes, it definitely thinks it is being pressed in...thats for sure...and makes sense...ill try that haha!
Yes latest CWM Recovery...5.0.2 or something like that...just updated that before phone died...
Click to expand...
Click to collapse
in twrp recovery, theres an option to not use the power button to select(thats what im using), is there a similar option in the newer cwm recovery? tr\y pressing the soft buttons). also, see if sticking a fingernail in between the power button helps, to pull out the button a bit.
After continuingto smack it...as well as "pulling" on the power button, I am not able to use volume buttons and power buttons within recovery...flashing a new rom now...will let you know if that fixes it...otherwise I will try unbickable in ubuntu again and see if that fixes it thanks for the pro-tip of smacking it, haha!

xoom stucked on boot logo - none of the buttons work in my old xoom :(

xoom stucked on boot logo - none of the buttons work in my old xoom
the power button works but you have to press it from every direction,
both volume buttons dont work
to turn off the xoom I need to disconnect battery so hard reset Power button + Volume won't work
I updated CM 10.1 with the last update and noticed that the 3G doesn't work as good as before so I reverted to previous version and it sucked on the logo
please share your ideas on how to bring the old xoom back alive ?
tried rebooting with and without SIM card in , and SD, no luck still at the logo .
I am going home now so if you can think of how can I restore the tablet with SDK ( if its possible ? ) please drop me a line on how to do it
...managed to install SDK tools and connected xoom to laptop,
but when type : adb reboot recovery , the error I am getting is :
"error: device is offline"
is there any chance to bring it back to live ? please say YES !

Categories

Resources