Hi,
I own a Bsnl Penta Tpad WS701c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
8- Rear camera 2 MP
I was trying to reload this tablet since it was frequently hanging so I have downloaded WS 704c driver software from pantel''s website and extracted the driver files in the Micro SD and tried to install but now the tablet is stuck on the Andriod Welcome Screen and I am unable to use the touch screen. Also when I am trying to shutdown it doesn't allow me to do so and Hard Reset is working but the installation does not complets and display screen stucks at ""update boot loader...............< and doesnot proceeds from here
Need your assistance in resolving this problem.
XDA Visitor said:
Hi,
I own a Bsnl Penta Tpad WS701c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
8- Rear camera 2 MP
I was trying to reload this tablet since it was frequently hanging so I have downloaded WS 704c driver software from pantel''s website and extracted the driver files in the Micro SD and tried to install but now the tablet is stuck on the Andriod Welcome Screen and I am unable to use the touch screen. Also when I am trying to shutdown it doesn't allow me to do so and Hard Reset is working but the installation does not complets and display screen stucks at ""update boot loader...............< and doesnot proceeds from here
Need your assistance in resolving this problem.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
There is no Forum for your device on XDA...
but... First register an XDA account, then try asking here:
Android Q&A, Help & Troubleshooting
or here:
General Q&A
Good Luck!
Related
Hey Guys i need your Help
First i would to say i dont speak english so welll
Have I bought the Hannspree HG01 and want now to go into holiday
but the device does not work
I suspect the data from the device were erased.
It appears the error message:
Load... Pleas insert SD card include Ap
On the memory card is everything on it.
I suspect that Windows is damaged.
Can someone help me please?
More about this device : Hannspree HG01
Memory Flash: 64 MB; SDRAM: 64 MB
GPS Chipset SiRF Star III
CPU Speed 400 MHz
USB USB 1.1
Storage Media SD (up to 2 GB)
Windows CE Core 5.0
http://www.hannspree.com/EU/EN/prod...om/EU/EN/product_detail.aspx?id=16198&c=16210
thank you about your answer
As this is an HTC devices only forum you won´t get too much atention, however perhaps another member can poin you into the right direction
Good luck,
Yes we can!
Post your problem on the forum of http://www.pocketnavigation.de
and if your the device is really broken, go to
-> http://www.hannspree.com/eu/de/common.aspx?mid=1944
A Chara
Have a DesireTab (Android 4.2 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.5GHz, 3G, Dual Camera, Dual Core, HDMI Out,8000mA)), and am trying to root the device to physically extract the NAND device using DD or DCFLDD.
I am using Windows 7, and have both drives showing in Win Explorer (16Gb NAND, 32Gb SD Card), but when I use ADB DEVICES, it does not pick up the Tab. USB Debugging ON, MTD device used ....
Have loaded Huawei, Alcatel and Nexus successfully .... any ideas why I am getting these symptoms?
Android Device with no access to ADB
crumdub12 said:
A Chara
Have a DesireTab (Android 4.2 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.5GHz, 3G, Dual Camera, Dual Core, HDMI Out,8000mA)), and am trying to root the device to physically extract the NAND device using DD or DCFLDD.
I am using Windows 7, and have both drives showing in Win Explorer (16Gb NAND, 32Gb SD Card), but when I use ADB DEVICES, it does not pick up the Tab. USB Debugging ON, MTD device used ....
Have loaded Huawei, Alcatel and Nexus successfully .... any ideas why I am getting these symptoms?
Click to expand...
Click to collapse
Maybe another question;
How do you deal with an Android device that does not respond to ADB? , is it possible to root using Z4ROOT etc ... , and use physical extraction tools from the GUI on the Android Device?
New to this, just looking for opinions
zeki Streaming Media Box/minipc
TAB803B
Android ICS 4.0.4
1 GB RAM
cpu:allwinner a10 clocked at 900 mhz
gpu:mali 400
HDMI out
Ethernet
2 USB ports (no mini usb)
SD card slot
WiFi 802.11b/g/n
4 GB flash memory
can anyone help me root it?
demonnerd said:
zeki Streaming Media Box/minipc
TAB803B
Android ICS 4.0.4
1 GB RAM
cpu:allwinner a10 clocked at 900 mhz
gpu:mali 400
HDMI out
Ethernet
2 USB ports (no mini usb)
SD card slot
WiFi 802.11b/g/n
4 GB flash memory
can anyone help me root it?
Click to expand...
Click to collapse
bump
demonnerd said:
bump
Click to expand...
Click to collapse
you can try this http://forum.xda-developers.com/showthread.php?t=1886460
Trozzul said:
you can try this http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
This did not work
I think its because of lack of communication
The usb ports on the mini pc are (host only) ports so there is no communication
Also there is no way to boot into recovery mode because of the lack of vol -- + buttons plus the power button is not even a real power button
Its a sleep button.
Is there a way with mini pcs to use a keyboard to boot into recovery mode because if i can im sure i can get it to flash a cwm recovery rom and a su rom va sd card.
my only hope is the keyboard keys but i need to find out what keys will use the same effect as vol -- +
Please help in connecting my tab to hard drive or pendrive.
When i connect my pendrive using otg cable there is no notification or any device recognised in my folder.
Company says my tab supports up to1 tb harddisk.
Device configuration:
Iball slide brace x1 tablet 10"
Android version 4.4 KitKat
Rom 16 gb
Ram 2gb
Sunny0 said:
Please help in connecting my tab to hard drive or pendrive.
When i connect my pendrive using otg cable there is no notification or any device recognised in my folder.
Company says my tab supports up to1 tb harddisk.
Device configuration:
Iball slide brace x1 tablet 10"
Android version 4.4 KitKat
Rom 16 gb
Ram 2gb
Click to expand...
Click to collapse
Hello,
You may check if your device supports OTG with this app OTG checker
-Vatsal
I really need help, I tried rooting my phone using kingroot and it worked, but i then tried to increase my internal memory by partitioning my phone storage cause i found out that my phone has separate partitions, the internal memory, phone storage and sd card storage,. My internal memory has only 1 gig of memory and a 5.7 gig of phone storage, 644 mb is used by the system and I only got few memories left which caused "insufficient memory" alert to appear. Now I tried to use an app to increase my internal memory, as my phone rebooted, it suddenly got stuck on logo screen.
I tried to wait for it, but it is really stuck...
I forgot to enable my usb debugging, and i forgot to download CWM tool, even tried factory data reset and cache.. i looked for its firmware for flashing but found none, Usb vcom port won't be detected on my laptop, what should i do? I'm new at this.. please i need help from those who have any idea of this problem...
-KEN XIN DA (X3) / 8G rom / dual sim / 1G ram / Quad Core, Cortex-A7, 1.3GHz / OS Kitkat 4.4.2 :crying::crying:
joshian.vicera said:
I really need help, I tried rooting my phone using kingroot and it worked, but i then tried to increase my internal memory by partitioning my phone storage cause i found out that my phone has separate partitions, the internal memory, phone storage and sd card storage,. My internal memory has only 1 gig of memory and a 5.7 gig of phone storage, 644 mb is used by the system and I only got few memories left which caused "insufficient memory" alert to appear. Now I tried to use an app to increase my internal memory, as my phone rebooted, it suddenly got stuck on logo screen.
I tried to wait for it, but it is really stuck...
I forgot to enable my usb debugging, and i forgot to download CWM tool, even tried factory data reset and cache.. i looked for its firmware for flashing but found none, Usb vcom port won't be detected on my laptop, what should i do? I'm new at this.. please i need help from those who have any idea of this problem...
-KEN XIN DA (X3) / 8G rom / dual sim / 1G ram / Quad Core, Cortex-A7, 1.3GHz / OS Kitkat 4.4.2 :crying::crying:
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here. Try posting your query in
Android Q&A,Help and Troubleshooting
or in the Q&A thread here->[Ask Any Question][Newbie Friendly].
Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist