Hey Guys i need your Help
First i would to say i dont speak english so welll
Have I bought the Hannspree HG01 and want now to go into holiday
but the device does not work
I suspect the data from the device were erased.
It appears the error message:
Load... Pleas insert SD card include Ap
On the memory card is everything on it.
I suspect that Windows is damaged.
Can someone help me please?
More about this device : Hannspree HG01
Memory Flash: 64 MB; SDRAM: 64 MB
GPS Chipset SiRF Star III
CPU Speed 400 MHz
USB USB 1.1
Storage Media SD (up to 2 GB)
Windows CE Core 5.0
http://www.hannspree.com/EU/EN/prod...om/EU/EN/product_detail.aspx?id=16198&c=16210
thank you about your answer
As this is an HTC devices only forum you won´t get too much atention, however perhaps another member can poin you into the right direction
Good luck,
Yes we can!
Post your problem on the forum of http://www.pocketnavigation.de
and if your the device is really broken, go to
-> http://www.hannspree.com/eu/de/common.aspx?mid=1944
Related
Hello
Anyone got the SD HC (High Capacity) drivers for OMAP850/Tornado? If yes could please attache here or contact me via PM?
i don't think you'll find that driver here...!!! but god luck...!!
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
..and some luck comes over us, if we need a special Hardware!Some HTC Devices handles SDHC, others do not...is this possible?Or not?
Extracting and installing the driver may be possible, Omap850 is there, but what about the CardSlot? Ive heard, there are some Specifications for SDHC...
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
bellevue Washington..I live not too far from there, i live in Everett.
SDHC driver
I happened to see a file called omap850_sdhc.dll in your own post:
http://forum.xda-developers.com/showpost.php?p=1407553&postcount=856
You opening this thread means this one doesn't work?
I already baught a 4 GB SDHC card a month ago to find out it doesn't work in any device i have... damn. Hope somebody can get a hold of the driver for us.
May not work..
...because ive read the sdhc.dll means HostControl and not HighCapacity....
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
DSF said:
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
Click to expand...
Click to collapse
Hello,
Tried it on my Tornado, but doesn't work with SDHC. It doesn't detect the Storage Card. It does work with a 2 GB non-SDHC card. So no harm to install it, but you still cannot read SDHC. damn.
hi and thanks for testing
.. strange.. maybe we need newer version of omap850_sdhc.dll?
Unless I'm missing something here: The file you had linked was from a post in the Universal forums. The Universal doesn't have an OMAP850 cpu but an Intel Bulverde. Since the driver support is cpu dependent, it was to be expected that the one for the intel won't work for the omap.
Yes, but I can see and use the storage card with these dlls.
I've tried to copy sdbus.dll & sdmemory.dll from other WM5 build (omap850 smartphone) and the phone doesn't recognize the storage card anymore. After deleting these dlls (when deleting , the original file from ROM comes back) and rebooting , storage card is avaiable again.
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks
Hello people,
I have a low-rom-memory device (32mb) which comes with wince 5 installed, I would like to move the OS from the rom to a SD card which would be bootable.
I just need to figure out how can I make the bootloader to boot wince from the SD card.I think I have u-boot.
Shinelco 3500 gps navigator, CPU Atlas II 300mhz, 64mb ram, 32mb rom, 512mb integrated nand flash.
Thanks a lot!
ps
ehy, I was wondering, maybe I can also upgrade to WM 6 standard.. But I need to learn how to cook..No time for this!
gnappoman said:
Hello people,
I have a low-rom-memory device (32mb) which comes with wince 5 installed, I would like to move the OS from the rom to a SD card which would be bootable.
I just need to figure out how can I make the bootloader to boot wince from the SD card.I think I have u-boot.
Shinelco 3500 gps navigator, CPU Atlas II 300mhz, 64mb ram, 32mb rom, 512mb integrated nand flash.
Thanks a lot!
ps
ehy, I was wondering, maybe I can also upgrade to WM 6 standard.. But I need to learn how to cook..No time for this!
Click to expand...
Click to collapse
After reading you que , ihad google in our froum but nither result found..
Its defintly cool to have os on mmc..
daaamn...
You experts!
No there is no way to do that.
First I should learn a bit more about your device, what the possiblillities are, before just flashing some roms.
Good luck!
EC
Hi I am completely new to this and am having trouble finding the right threads, so I apologise in advance if I am doing something incorrect. I have (or rather my son has) a ZTE V795 ANDROID VERSION 2.3.6 BASEBAND VERSION MOLY.WR8.W1315.MD.WG.MP.V4.P11
2013/09/13 14.37 KERNEL VERSION 3.4.5 BUILD NUMBER V795_T01 which I believe has a very small non-sd card internal memory. It also has a new 16GB external sd card memory. I have a Windows Vista computer dual booted with Lubuntu/linux and another running Windows 8.1 which I can hook up to the phone if necessary. First I would like to create a recovery image of the phone, so I can restore the phone to its current state, should I get something wrong. Then I would like to root the device (Does Framaroot work on this model?) with an aim of swapping the internal for external memory (understanding that it voids warranty etc.). The final icing on the cake would be to expand the "RAM"/cache, again using the sd card in place of the internal memory - please excuse any incorrect terms. Has anyone attempted these things before, and if so where can I look/ Thanks in advance,. Rob.
mightyzazz said:
Hi I am completely new to this and am having trouble finding the right threads, so I apologise in advance if I am doing something incorrect. I have (or rather my son has) a ZTE V795 ANDROID VERSION 2.3.6 BASEBAND VERSION MOLY.WR8.W1315.MD.WG.MP.V4.P11
2013/09/13 14.37 KERNEL VERSION 3.4.5 BUILD NUMBER V795_T01 which I believe has a very small non-sd card internal memory. It also has a new 16GB external sd card memory. I have a Windows Vista computer dual booted with Lubuntu/linux and another running Windows 8.1 which I can hook up to the phone if necessary. First I would like to create a recovery image of the phone, so I can restore the phone to its current state, should I get something wrong. Then I would like to root the device (Does Framaroot work on this model?) with an aim of swapping the internal for external memory (understanding that it voids warranty etc.). The final icing on the cake would be to expand the "RAM"/cache, again using the sd card in place of the internal memory - please excuse any incorrect terms. Has anyone attempted these things before, and if so where can I look/ Thanks in advance,. Rob.
Click to expand...
Click to collapse
There is no forum for your device on XDA, but inside the ZTE Blade forum, there is a thread for questions about non ZTE devices, you can find it here: http://forum.xda-developers.com/showthread.php?t=1987960. There you should redirect your question. Good luck!
Hi,
I own a Bsnl Penta Tpad WS701c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
8- Rear camera 2 MP
I was trying to reload this tablet since it was frequently hanging so I have downloaded WS 704c driver software from pantel''s website and extracted the driver files in the Micro SD and tried to install but now the tablet is stuck on the Andriod Welcome Screen and I am unable to use the touch screen. Also when I am trying to shutdown it doesn't allow me to do so and Hard Reset is working but the installation does not complets and display screen stucks at ""update boot loader...............< and doesnot proceeds from here
Need your assistance in resolving this problem.
XDA Visitor said:
Hi,
I own a Bsnl Penta Tpad WS701c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
8- Rear camera 2 MP
I was trying to reload this tablet since it was frequently hanging so I have downloaded WS 704c driver software from pantel''s website and extracted the driver files in the Micro SD and tried to install but now the tablet is stuck on the Andriod Welcome Screen and I am unable to use the touch screen. Also when I am trying to shutdown it doesn't allow me to do so and Hard Reset is working but the installation does not complets and display screen stucks at ""update boot loader...............< and doesnot proceeds from here
Need your assistance in resolving this problem.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
There is no Forum for your device on XDA...
but... First register an XDA account, then try asking here:
Android Q&A, Help & Troubleshooting
or here:
General Q&A
Good Luck!