Hi guys, i'm in trouble i flashed one recovery s/w on my sony xperia l , now my phone is not showing anything .. No notification lights.. No volume up and down button doing any action.. My phone starts with a vibration - which it used to.... additional info: "my phone has no OS installed, and I flashed "recovery-clockwork-touch-6.0.4.3-quincyatt.img" after this, my phone is not showing anything...previously... TWRP was installed & blisspop OS was running.... but, It was not able to flash cm12.1 or cm12 so I changed recovery software to "recovery-clockwork-touch-6.0.4.3-quincyatt.img" ... now phone itself is not starting...when I press power button it vibrates for some milliseconds.. & it all black nothing happens.. not even "sony logo" displays"
Phone: Sony Xperia L
status before: TWRP recovery was installed and blisspop ROM was installed
status now:
**No OS installed (as I wiped data in order to install CM12.1) and phone is not showing anything not even "sony" logo. **when I press volume up/down button it's not coming to recovery mode or boot loader mode...
**Phone is not recognized by my Computer also
Hi, thank you for using XDA Assist. Try returning your device to stock. See this, http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955. If your device is not recognized on your pc, have you instated usb drivers for your device? If you're having problems ask in the thread I linked you to. They are the experts on your device.
Good luck!
Related
Hey Guys,
I ran into a bit of problem lately, I have an xperia tipo (st21i) and its unfortunately, bricked.
I had installed cm11 and android kitkat 4.4.2 ROM on it but decided to change to the Xperia Z fire s2 , which would work on my phone.
At first, I put the new ROM on the external Sd Card and went into recovery mode and tried to set it up but the installation was aborted.
So I downloaded sony's flashtool and i tried to flash but it didnt work.
So i used CMD and the ADB drivers as I had used for the kitkat rom.
as soon as I gave the fastboot-reboot command, the screen of the phone lit up the top was colored grey and the rest white.
I read that taking out the battery and then reinserting and trying to boot into recovrey would help but nothing happened.
So i left it for a while and then when i charged it today and plugged it into my laptop, the thing wouldnt even boot up, or be detected.
The green led is always on when it is connected to the laptop.
The green led flashes and the phone vibrates when i press power button or power+ (-)volume.
however if i press power+ (+)volume the blue led flashes.
Help guys,i have no idea what to do!!
use androxyde flashtool in flashmode
downld firmware with xperiFIRM
and write more concise error reports.
btw ure in the wrong forum altogether.
Thanks
Thanks a lot for the help
I installed custom rom CM11 to my Sony Xperia SP to make it KItKat 4.4.4 and i Followed everything in this link which i am not being allowed to put by XDA, but the website is ibtimes.com and its about installing cynogenmod 4.4.4 kitkat to sony Xperia SP. (Please search it up)
I did not unlocked the bootloader and directly rooted the phone via KingoRoot (One click root). I followed everything else written in that blog. In the end it said reboot the phone and it will take some minutes. The phone never booted after that. Its not starting, black screen.When i press VOL UP+pwr button blue light flashes in the bottom and upon pressing VOL down+pwr button green light flashes in the bottom but the phone does not switch on, not even sony logo appears.
Please i NEEd Urgent Help
Dear Members,
I was trying to update my Xperia Ion from Jelly Bean to CM11 KitKat. I was following videos on youtube that how to do it. I did unlock my phone through sony standard procedure. after that, according to videos, I open Sony Flashtool and I clicked Flash boot Mode. Then I connected phone through Volume Up + insert USB cable. Then I have clicked Kernel to flash and have flashed .img file from my CM11 Rom folder.
And then problem start.... Oppppsssssss since last night struggling with this. After kernel to flash (.img), I have disconnected phone from Laptop and try to enter flash mode by pressing Volume Down + power. Phone does not go any where except a little vibration one time, but there is no Sony Icon, no screen on off. Just when I connect USB, green led is there and stays until it remain connected to laptop.
Moreover, If I press and hold Volume Up+Volume down + Power, it vibrate one time and then after few seconds, it vibrates for three time. And that is all....... Please Help me to fix.....
I shall be very thankful to you.
Regards,
Hi, thank you for using XDA Assist. Flashing the wrong kernel for your device can brick it. I would suggest you try to return the device to stock. That also may not work though. See this, http://forum.xda-developers.com/showthread.php?t=1752345 if you have questions you can try asking in that thread.
Thread closed.
Hi guys,
I am new to XDA developers..
I am using unite 2. I have the same problem like apps installing automatically...
so i saw the forum in this site and decided to try.
before it in my phone notification bar my phone shows a new software update,
so i downloaded the update.
after phone restarted and its not booting..
when i entered recovery mode by power+volume up it shows no command.
guys please help how to get back my phone
sandeepvemula said:
Hi guys,
I am new to XDA developers..
I am using unite 2. I have the same problem like apps installing automatically...
so i saw the forum in this site and decided to try.
before it in my phone notification bar my phone shows a new software update,
so i downloaded the update.
after phone restarted and its not booting..
when i entered recovery mode by power+volume up it shows no command.
guys please help how to get back my phone
Click to expand...
Click to collapse
Disable "Software Update" application for automatic app installing problem.
While getting 'no command' message, try the hardware buttons like menu, home, or combination of volume buttons; this will show up the hidden recovery menu.
If your phone is bricked, i.e stuck at the very first micromax logo, flash firmware with sp flash tools. Here is a guide for it: https://www.youtube.com/watch?v=AoIg9-epPcM
Hi,
I wanted to change my rom to newest version of CarbonROM (7.x.x). I downloaded new rom, copied this onto my sd card, then I rebooted my phone to recovery where I wiped system, data, cache and dalvik. Later I flashed new rom from .zip file, everything went fine, so I rebooted my device and then I realized that it's not starting anymore. I was holding power button but there was only short vibration signal and anything more, when I connect my xperia z3 (d6603) to charger, only red light is blinking, when I'm trying to start device while it's connected to charger, red light is not blinking but it shines continously till I release power button. When I'm holding power and volume up there are only three short vibrations and that's all, they are repeating till I release buttons (this only happens when xperia is connected to charger or computer in other situation there is no response for power and volume up). Flashtool says that I have to install drivers, but they're already installed, device manager shows my phone as uknown device. But when I'm connecting my phone to computer, there is this specific sound from windows and flashtool shows that 'Device disconnected', when I'm disconnecting it. Is there any hope for my phone? Can I try anything more?
well try to enter fastbootmode and flash a recovery.
Similar issue here, I have a d6603 and after using GiefRoot & NUT's DualRecovery I succesfully entered TWRP and attempted to install CarbonROM (latest: device-z3 on the official website)
Now my phone won't boot until I re-flash an older version of stock... any help would be greatly appreciated!
1. Followed this guide: xda's Z3 forum: guide-rootrecovery-how-to-root-install-t3017056
2. boot into recovery, turn off zip verification
3. install CarbonMOD's zipfile
What'd I miss? :S