STOCK_UI_REBORN_V3_PATCH2_RECENT CARD STACK
DOWNLOAD THE ATTACHMENT PUT IT IN SD CARD AND RESTART IN RECOVERY AND FLASH THE ZIP.
REBOOT AND ENJOY.
LINK-SORRY FOR WRONG LINK.
Proper link-https://drive.google.com/file/d/0B5bbPmY0Z0AHU2piQWhiWEE3N0k/view?usp=sharing
SCREENSHOT ATTACHED BELOW-
IF U LIKE MY POST HIT THE THANKS BUTTON
YHANK U ALL
Related
installed a new rom to my hd2 now a patch is available. how do i install the patch please.
if the patch is... a cab just copy it to the phone and execute it...
dorlean said:
installed a new rom to my hd2 now a patch is available. how do i install the patch please.
Click to expand...
Click to collapse
Depends on format of patch. If its a cab, copy it on to your device and then click on it using your file explorer
If its a .exe you'll need to connect your device to your pc using usb cable and run it from your pc
A Little Help Please?
Fallen Spartan said:
Depends on format of patch. If its a cab, copy it on to your device and then click on it using your file explorer
If its a .exe you'll need to connect your device to your pc using usb cable and run it from your pc
Click to expand...
Click to collapse
Sorry, could you please post detailed instructions on how to do this i am 13 and have a pretty vast knowledge on how ROM's in devices work i just don't want to mess up my phone in the process I have an Droid DNA and the patch has been released in the form of a zip, containing files " META-INF" and "system" can i just replace the existing files in my ROM with these and re-flash it? Thanks in advance.
HTC DNA;Install46753843 said:
Sorry, could you please post detailed instructions on how to do this i am 13 and have a pretty vast knowledge on how ROM's in devices work i just don't want to mess up my phone in the process I have an Droid DNA and the patch has been released in the form of a zip, containing files " META-INF" and "system" can i just replace the existing files in my ROM with these and re-flash it? Thanks in advance.
Click to expand...
Click to collapse
It seems that it's a zip file.
Make sure you have installed cwm recovery
1. Boot your device into recovery mode (press volume up+power button+home button)
2.Use volume upon down keys to scroll and power button to select.
3. Now select install zip from sd card.
4. Select choose zip from SD card.
5. Now select the zip file (patch file)
6. Scroll down to yes and select yes.
7. The patch will start installing, wait for it to install.
8. You are done. Now just reboot your device.
Installing .zip patches
Aniket Gurav said:
It seems that it's a zip file.
Make sure you have installed cwm recovery
1. Boot your device into recovery mode (press volume up+power button+home button)
2.Use volume upon down keys to scroll and power button to select.
3. Now select install zip from sd card.
4. Select choose zip from SD card.
5. Now select the zip file (patch file)
6. Scroll down to yes and select yes.
7. The patch will start installing, wait for it to install.
8. You are done. Now just reboot your device.
Click to expand...
Click to collapse
Do I need to clear dalvik, or regular cache?
install patch, format is patch
how can i install these patchs :
https://gist.github.com/pawitp/88a1d4514a0734c866c7
my device is mega 5.8
and topic is : http://forum.xda-developers.com/gal...m-resurrection-remix-lollipop-v5-2-7-t2993621
thanks
Hello All,
I have completed the following steps for installing the CWM:
Quote
1- Download the CWM recovery file.
2- Download Link | Filename: PG58IMG-cwm-6.0.0.3-pyramid.zip | Size: 5.2 MB
3- Rename the above file to PG58IMG from PG58IMG-cwm-6.0.0.3-pyramid.
4- Copy the PG58IMG.zip file to the root of your external SD i.e directly send to the SD card, don’t put it inside any folder inside the SD card.
5- Turn off your phone. Boot into HBOOT mode by powering the phone on while holding down the Volume Down button.
6- The press Volume Up when it asks you “Do you want to start the update”. This will start installing ClockworkMod recovery.
Unquote
While rebooting my phone in the HBOOT mode, i did not receive the “Do you want to start the update” message!!! seeking your assistance letting me know how to complete the installation.
Thanks
ibrahimisadek said:
Hello All,
I have completed the following steps for installing the CWM:
Quote
1- Download the CWM recovery file.
2- Download Link | Filename: PG58IMG-cwm-6.0.0.3-pyramid.zip | Size: 5.2 MB
3- Rename the above file to PG58IMG from PG58IMG-cwm-6.0.0.3-pyramid.
4- Copy the PG58IMG.zip file to the root of your external SD i.e directly send to the SD card, don’t put it inside any folder inside the SD card.
5- Turn off your phone. Boot into HBOOT mode by powering the phone on while holding down the Volume Down button.
6- The press Volume Up when it asks you “Do you want to start the update”. This will start installing ClockworkMod recovery.
Unquote
While rebooting my phone in the HBOOT mode, i did not receive the “Do you want to start the update” message!!! seeking your assistance letting me know how to complete the installation.
Thanks
Click to expand...
Click to collapse
check if you have renamed it properly(as pg58img.zip)
otherwise flash a recovery.img by using the fastboot command
rzr86 said:
check if you have renamed it properly(as pg58img.zip)
otherwise flash a recovery.img by using the fastboot command
Click to expand...
Click to collapse
i double checked and yes i renamed it properly...
ibrahimisadek said:
i double checked and yes i renamed it properly...
Click to expand...
Click to collapse
hmm,
then try again and if it fails do as i suggested in my previous post
best wishes
Bricked Your Unite 2??
Try Unbricking it in a DIFFERENT WaY.
So, Let's Start
You need these:
Bricked MMX UNITE 2(duh!)
USB Cable
PC(Windows 7)
Memory Card(size Doesn't Matter)
MTK USB Drivers(Attached)
ZIP flashable STOCK ROM(Go to needroms.com){you need to register to download ROMS}
SP flash Tool(Attached)
SuperSu(In case you Want to Root your Phone again)(Attached)
STEP 1.
Copy the STOCK ROM to the Memory Card.
STEP 2.
Extract all Files downloaded on the desktop.Open up SPflash tools and load the scatter file by clicking 'Scatterloading'.
select Recovery.img and boot.img .
STEP 3.
Click Download. Remove the battery of your device and connect it to your PC.
STEP 4.
The Progress Bar will Turn Red then to Purple and Finally Yellow.
You Will get a small window with a Green circle telling Download OK.
You Have successfully installed CWM Recovery.
STEP 5.
Disconnect the Phone,insert the memory card and Battery. Power ON the phone by pressing VOLUME UP+DOWN+POWER keys. It will Boot into CWM recovery.
STEP 6.
Select Install zip from SD card (Use volume and power keys For Browsing).Select the zip file and select YES.
Select Go back and Reboot system NOW.
You're Done!
HOPE THIS HELPS
:good: Don't Forget to Hit ThankZ If IT Did Help you :good:
progress bar stuck when it is red
wt can i do?
plz hlp!
thanks in advance.
Please help me ASAP.
I am trying to do as u said but it only goes on ok till step 4. After that it doesnt respond at all when i put the battery and memory card with only the zip stock rom file in it. please reply ASAP.
STOCK_UI_REBORN_V3 PATCH-1(MICROMAX UNITE-2/Kitkat)
Lollipop Keyboard & Dialogue box/Pop up background.
FLASHING PROCEDURE:-
JUST PUT THIS DOWNLOADED ZIP IN SD CARD .
RESTART IN RECOVERY ,CHOOSE/INSTALL ZIP FROM SD CARD .AFTER INSTALLATION COMPLETES. RESTART THE DEVICE .
AND DONE.
PATCH LINK-https://docs.google.com/uc?id=0B5bbPmY0Z0AHSkMwSUV4aHdTaGM&export=download
BY
AJAY C JAMBURE .
THEMER / DEVELOPER FOR MMX UNITE-2.
IF U LIKE MY POST AND FIND IT USEFUL THEN HIT LIKE AND SHARE THIS POST
THANK U ALL
Seems like some of us have been trying to get out of the bootloop. Well, I posted a video about it (here) and most people in the comments have not been able to solve their issue due to the "magi" or what ever issue, but don't worry! I'm here to help! I will post all of the firmwares and how to flash them, so keep reading!
Kitkat (4.4.2) firmwares
- IMG- FLASHABLE BY FASTBOOT
- ZIP - FLASHABLE BY RECOVERY
JellyBean (4.2.2)
- IMG - FLASHABLE BY FASTBOOT
- ZIP - FLASHABLE BY RECOVERY
INSTRUCTIONS:
For flashable zips, download the zip file for the Android version you want and put it on a Micro SD Card. No, usb OTG won't work because the tablet looks in the "/mnt/sdcard" directory and there ain't no OTG capabilities there. Switch of the tablet and put the SD Card in. Boot into recovery by holding the power button and volume up. In the recovery, use the volume buttons to select and the power button to confirm. Select "wipe data/factory reset" and hit the power button and wait. This might take a while. Once it's done, select the "wipe cache" option, note, you tablet might reboot or do some other stuff, just ignore whatever it does and continue. Now, just hit update via external storage and select the zip file and hit the power button. Make sure you don't rename the zip file, otherwise you're going to get a signature verification error. Wait for it to complete and then wipe the data/factory reset again and reboot into system!
Common errors
You get an error that doesn't let you through the updating process:
To fix this, choose another firmware zip file and update (or perhaps downgrade) to that instead. After that, you repeat the steps but with your desired firmware.
You get an error while updating, but the update still continues
This won't affect anything Just ignore and continue following the steps.
-----------------------------------------------------------------------------------------
For img's, download and install the desired img file you want. Make sure you got adb and fastboot installed (there are tutorials over the whole internet) and extract the 7z file in the adb/fastboot folder. Make sure you DO NOT extract the system.img.gz, it is supposed to be flashed in its state. Now you can basically follow my video steps. Don't forget to reboot after flashing fastboot
Common errors
Invalid sparse file format at header magi
To fix: Flash 4.2.2 instead, and if you still want 4.4.2, flash the 4.4.2 zip via recovery.
Leave a thanks if I helped you and if you run into issues, reply
I know this is old, but the download doesn't work for 4.2.2 zip :/
Petrifying Gaming said:
I know this is old, but the download doesn't work for 4.2.2 zip :/
Click to expand...
Click to collapse
Shoot you're right! I'll get it up asap
Petrifying Gaming said:
I know this is old, but the download doesn't work for 4.2.2 zip :/
Click to expand...
Click to collapse
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.
ramiabouzahra said:
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.
Click to expand...
Click to collapse
Thank you so much!
ramiabouzahra said:
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.
Click to expand...
Click to collapse
The link doesn't work again . Same one.
flash drive?
Hello,
I cannot find a flash drive (dual micro usb-usb) that is not OTG. Do you have one you can recommend me for purchase?
Thanks
help
ramiabouzahra said:
Shoot you're right! I'll get it up asap
Click to expand...
Click to collapse
hey it would be nice if you could share those fastboot commands.
or share a link of a video please.
and... that link is down again....
Hello,
got bricked too after 4.2.2 fastboot flashing, with usb logo at startup, any help ? Thank's
no funciona zip 4.2.2 jelly bean