How do you prl write on this device? I'm use to ##data# then pressing prl write but I'm not seeing that option there.
Related
Can anyone tell me where the prl is located. I search the whole phone for .prl but none found. Is it a different file extention? thanks.
extract it using cdma workshop. I dont think you will find by searching
If you're just looking for the info, dial ##778
Choose "View"
if it asks for a pasword, use 000000 (I think it only asks when you choose to "Edit").
From the lower left soft key, choose "View Info" and select "PRL".
msh441 said:
If you're just looking for the info, dial ##778
Choose "View"
if it asks for a pasword, use 000000 (I think it only asks when you choose to "Edit").
From the lower left soft key, choose "View Info" and select "PRL".
Click to expand...
Click to collapse
Isnt it ##778#...thanks.
What I'm trying to do is test a modded prl to see if i can get better than 1x data speed while connected to Verizon. Worked on my old A900M. Thougth it would be a simple cut n paste since this is a win-mob phone.
Mine works just pushing ##778 [+send].
Either way.
When I hit send it would dial, either way. Now I know where to find my prl version. thanks.
from what i've been reading and if i understand it correctly, some prl's can be loaded from our memory card? I'm going to extract it and mod it the old fashion way like i did on the a900m.
tomc585 said:
When I hit send it would dial, either way. Now I know where to find my prl version. thanks.
from what i've been reading and if i understand it correctly, some prl's can be loaded from our memory card? I'm going to extract it and mod it the old fashion way like i did on the a900m.
Click to expand...
Click to collapse
Because you need to put ##778# and NO ##778
usbar said:
Because you need to put ##778# and NO ##778
Click to expand...
Click to collapse
guess u missed post #9...thanks anyway
Hi. I've found this site to be very helpful in my attempts to activate an Alltel HTC Hero cdma on the Page Plus network.
I finally got the phone to make calls, but it says that I'm roaming - there's a triangle above the signal strength meter. I checked it by making a call and it charges me the roaming rate of $0.29 a minute. I think I need an updated .prl file, but I'm not sure.
I'm able to send and receive text. I cannot send or receive MMS or connect to the internet.
Maybe someone here can help me. Please
Phone will be used in Berlin, WI 54923 (Near the following cities: Appleton, Oshkosh, Neenah, Fond du Lac)
Original phone details:
Alltel network, but Alltel is no longer in my area. Alltel customers were sent to Element One. I don't know if this affects what I'm trying to do.
Phone # (MDN) 920xxxxxxx
MSID (MIN) 9202900444
SIN/NID 1/65535
MMS Server url mms.alltel.com/servlets/mms
I rooted the phone and got my MSL (000000) number and made the following changes
Phone # (MDN) 920xxxxxxx
MSID (MIN) 9202799238 (from Page Plus)
SIN/NID 240/65535 (got "240" from Page Plus, they couldn't give me a NID number so I used the same one)
MMS Server url mms.vtext.com/servlets/mms (got this from searching on forums)
I downloaded a .prl file via KittyWireless manual programming instructions kittywireless.com/pageplus/pageplusmanualprogramming.html
I updated the PRL from my sd card by dailing ##775# and "commit changes"
When I make a call, I'm always asked to re-enter the 10 digit phone number I'm trying to reach. I've tried the following OTA programming numbers *228, *22800, *22888, *22890, *22891. I always get the following "Message AP 32 Welcome to US Cellular ..." It should be Verizon or Alltel, right?
I thought I might be using the wrong NID number so I tried 65335 (which I think is for Verizon), but it didn't make a difference. Still roaming and same messages when I try OTA programming.
I don't know if this means anything, but when I dial ##DATA# to edit mode I can choose either Data Profile, EVDO, or Advanced. If I choose EVDO, I get a blank screen. I can't make any changes.
So, I'm thinking I need a different prl file. Would this affect my data connection for internet and MMS too? What do you guys think? Can someone direct me to the right PRL file?
I've spent hours trying to get this phone to work... if you have any suggestions let me know.
Thanks!
PRL Update...
Hi there..
I've found the following PRLs useful when using Sprint Phones on Pageplus, so perhaps they will help with the Alltel Hero. I've used 51425m on my Alltel Hero on Pageplus. Worked like a charm. The 52505m is the latest VZW EvDo PRL.
Noticed the thread is old, but may help anyone else trying to do this.
Ive been trying to get 3g data working with my Nexus S on Pageplus.
All I can get is either a good 1X data connection or a slow, intermittent 3g connection.
I will try these PRL's when I get home.
Thanks!
any luck on getting this working yet ??? I can not find any solutions anywhere
You contact your carriers
8=D
Ok I have a Evo 3D flashed to boost. I did it myself. Heres exactly how I flashed it:
1. Activated Incognito Donor and let the prl update.
2. Heres where Im kind of confused. I'm using CDMA Workshop 3.8.3 and qpst and qxdm. I read the nv items. I was told it should take a little while to read them. Mine dont. Takes like 10 seconds to read 465, and 466 and 1 second for 1192,1194. For my range I put 465-1194. Is that what I'm doing wrong? When I read 465-465 it reads very fast. Lastly if I read 465- the numbers already there which is 65535 it gets t0 %76 and says phones does not answer. Does it everytime even when I restart the incognito a million times.
3. I read Nams 1 and 2.
4. Read meid and obtained the SPC Code.
5. I studied profiles 0 and 1 tot he T.
6. Obtained the aa and aaa keys. for profile 1 is the aaa keys 12 digits or 6. That also confused me in the guide.
Evo:
1. **Repaired MEID**
2. Wrote NV Items 465,466,1192,1194. I wrote the NV items that took 15 seconds.
3. Wrote SPC code
4. I didnt write the nam files i just did the ##786# reset then wrote the spc code again and restarted phone and let it activate then canceled the PRL update.
5. Wrote the aa and aaa keys to profiles 0 and 1.
6. fully activated and stuck on 1x data speeds. Im on a stock rom (but even on a 4g evo rooted even tried multiple roms im still on 1x.)
Ive tried some methods such as change the proxy ip to 0.0.0.0 then http proxy port to 0. Didnt help at all.
Also tried going into EVDO and changing it from Automatic to CDMA Only. Still on 1x.
PLEASE HELP IVE BEEN LOOKING FOR ANSWERS FOR MONTHS AND NOTHING!!!! THANKS SO MUCH!
Picked up a Verizon HTC One M8, tried to use x3jailbreak's Sprint HTC One M8 guide but had no luck getting it to work since the Verizon phone doesn't seem to expose ##DATA# and some other things needed. Reaching out to see if anyone has a guide on how to do it, happy to offer a $50 bounty myself for a guide with fully working 3G and MMS, etc..
It can be easily flashed to any carrier.. All you need is DFS and change from only ruim to NV only option and flash the desired prl and then use *228 to program it over the air.
You don't need to access ##data# just use ##3424# to get the phone into diag mode.
I have successfully flashed a phone but having problems with 3g.. The 3g icon appears but won't connect to the net
PapaDocta said:
It can be easily flashed to any carrier.. All you need is DFS and change from only ruim to NV only option and flash the desired prl and then use *228 to program it over the air.
You don't need to access ##data# just use ##3424# to get the phone into diag mode.
I have successfully flashed a phone but having problems with 3g.. The 3g icon appears but won't connect to the net
Click to expand...
Click to collapse
Same here! 3g icon on status bar, but it doesn't connect, it doesn't even try, on settings it shows disconected no matter what I do
Don't ask how, I'm not sure myself....
I somehow messed up the programming on my Boost Moto G. The NAM setting, SPC and whatever low level CDMA settings are wrong.
I would like to get the phone back to factory settings using the DFS CDMA Tool. Does anyone know the correct settings for the phone?
The reason for the question is I performed a Cellular Data reset (SCRTN)
After the reset I cannot active on RingPlus anymore. It says it takes the PRL and Profile update, but after reboot my number stay 000-000-3644.
My MIN is 0000003644 as well. How can I reactivate on RingPlus?